📘 Lecture 33 — The Four Big Macroeconomic Issues and Their Inter-Relationships
📖 Overview: This lecture introduces the four major macroeconomic problems: unemployment, inflation, balance of payments issues, and lack of growth. It explains why each problem matters, explores their causes and interconnections, and presents different theoretical perspectives—Classical, Keynesian, and Monetarist—on unemployment specifically. Understanding these issues is fundamental to analyzing real-world economic policy and performance.
🗂️ Topics Covered
The lecture begins by outlining the four big macroeconomic issues: unemployment, inflation, balance of payments problems, and lack of growth. It then provides a historical overview of unemployment, defines unemployment and its various types, and discusses the costs of unemployment for society and individuals. The lecture introduces the concept of the labour force and definitional problems with unemployment rates, including underemployment and disguised unemployment. Finally, it presents three major theoretical views on the causes of unemployment—Classical, Keynesian, and Monetarist—using labour market diagrams to explain each perspective.
📝 Lecture Summary
The Four Big Macroeconomic Issues and Their Inter-Relationships
To study any major issue or problem in macroeconomics, it is important to address three questions: why it is important (its costs), what its causes are, and what policy prescription is associated with each diagnosis. The four major problems are unemployment, inflation, balance of payments problem, and the lack of growth. These problems are interrelated and should not be analyzed in isolation.
Unemployment
The History of Unemployment
The history of unemployment relevant to macroeconomics started in the Great Depression (1929-33), when unemployment rates reached 25% in the US and western Europe. During WWII, the problem subsided due to higher government defense spending. Post-war, rebuilding efforts absorbed workers, but the problem returned in the 1970s with two oil price shocks (1973, 1979) causing cost-push inflation and balance of payments deficits, leading to global recession. The 1980s saw tight US monetary policy and rising interest rates. After recovery, a brief recession in the early 1990s was followed by the rise of the new economy (information technology), but the bubble burst by the millennium. Japan remained in recession through the 1990s. In LICs, unemployment became more permanent due to high population growth rates outstripping job creation and adoption of capital-intensive technologies.
Definition of Unemployment
The unemployment rate is defined as the ratio of the number of unemployed people divided by the sum of employed and unemployed people. A rate of 3-4% is low, 10-15% high, and over 20% extremely high. Unemployment is the state in which a person is without work, available to work, and currently seeking work.
🔑 Unemployment rate: (Number of unemployed) / (Number of employed + Number of unemployed)
Types of Unemployment
There are several types of unemployment. Frictional unemployment occurs when a worker moves from one job to another while searching. Structural unemployment is caused by a mismatch between job location and job-seekers, either geographically or in terms of skills. Cyclical unemployment (or demand deficient unemployment) occurs when there is not enough aggregate demand for labor, caused by a business cycle recession. Technological unemployment is caused by the replacement of workers by machines or advanced technology. Classical or real-wage unemployment occurs when real wages are set above the market-clearing level, often due to government intervention (minimum wage) or unions.
Costs of Unemployment
If unemployment is voluntary, costs include lower output and national income, lost tax revenues, lost firm revenues, lost wages for other workers, and increased crime and violence. If unemployment is involuntary, additional private individual costs include loss of personal income, mental stress, and worsening family relationships.
The Concept of Labor Force (LF)
The labour force (LF) is the denominator in the unemployment rate formula. It includes all people eligible and able to work, excluding children, elderly, parents raising children, the handicapped, and terminally ill. A distinction exists between being able to work and being willing to accept a particular job (AJ). To be employed, one must be a member of the LF and willing to accept a job.
Definitional Problems with Unemployment Rate
The unemployment rate may be reported lower than actual due to underemployment (part-time work reported as employment) and disguised unemployment (salary without real work, common in government). It may be reported higher than actual due to child labour, incompatibility between skills and jobs, people doing more than one job, and unemployment benefits (or beggary in LICs) reducing work incentive.
The duration of unemployment depends on when benefits of accepting a job exceed costs of searching. Aggregate duration depends on the rate of entry into the unemployed pool (redundancy, sacking, resignation, temporary layoff, new entrants like college leavers) and exit from the pool (new jobs, returning to old jobs, disheartened workers, retirement, temporary withdrawal, emigration, or death).
Theories About the Causes of Unemployment: Three Views
The Labour Market Diagram
The lecture presents a labour market diagram with real wages on the vertical axis and number of workers on the horizontal axis. The LF curve is upward sloping and fairly inelastic (unresponsive to wage changes). The AJ curve (people willing to accept jobs) is flatter than LF and lies to its left. The horizontal gap between AJ and LF narrows at higher wages. The LD curve (labour demand) is downward sloping. The intersection of LD and AJ determines market equilibrium (employment N₁, wage w*). The intersection of LD and LF gives N*, the maximum possible employment. The horizontal distance between N* and N₁ is the natural level (or rate) of unemployment.
Classical Views
The Classicists viewed unemployment as essentially voluntary, caused by wages higher than free market level. If wages fell to market-clearing level, demand for labour would increase. Policy prescription: remove factors preventing wage reduction (labour unions, minimum wage legislation, unemployment benefit). However, unions were politically strong, removing minimum wage would hurt poorest workers, and removing unemployment benefit would attack the safety net. In the diagram, Classical unemployment is shown as the gap AB between LF and AJ at wage w₁ (above equilibrium w*).
🔑 Classical (real-wage) unemployment: Unemployment caused by real wages set above the market-clearing level, making it voluntary.
Keynesian Views
Keynes located unemployment origins in deficient aggregate demand. Boosting government expenditure would increase aggregate demand, causing demand for labor to increase through a multiplier effect, absorbing excess supply of laborers. In the diagram, increased demand shifts LD curve rightward (LD₁, LD₂), increasing employment from N₂ to N₁ toward N*.
🔑 Cyclical (demand-deficient) unemployment: Unemployment caused by insufficient aggregate demand during a business cycle recession.
💡 Why this matters: The Keynesian view justifies government intervention through fiscal policy (increased spending) to reduce unemployment, directly opposing the Classical hands-off approach.
Monetarist Views
Monetarists viewed unemployment in its natural rate context, not curable through wage decreases or demand injections. The economy operates around full employment, so the only concern is the natural rate—the horizontal distance between AJ and LF at market-clearing wage w*. Reducing this distance requires shifting AJ rightward (closer to LF). Causes of people not accepting jobs include frictional, structural, and seasonal reasons.
Frictional unemployment is caused by delays in matching job-seekers to jobs due to lack of information. Solutions: job centers, newspapers with better job information.
Structural unemployment is associated with changes in economy structure: demand patterns (tastes, fashion), production methods (capital vs. labour intensive), job replacement by computers, reduced industrial activity in a region, or natural calamities. Solutions include market-friendly policies (retraining, geographical mobility) and interventionist policies (government grants for training).
Seasonal unemployment relates to workers losing jobs due to seasonal factors (e.g., crop producers in winter). Solutions: facilitate labour migration, develop alternative seasonal tasks.
Monetarists also suggested supply-side measures to reduce the incentive to work, such as lowering income tax rates.
Understanding Frictional, Structural, Seasonal Unemployment
A diagram shows wage rate on the vertical axis and average duration of unemployment on the horizontal axis. The relationship between wage rate and unemployment duration is illustrated with points X and Tₑ, Wₐ and W₀, showing how different types of unemployment relate to wage levels and duration.
⭐ Key Takeaways
The four major macroeconomic issues—unemployment, inflation, balance of payments problems, and lack of growth—are deeply interrelated and cannot be analyzed in isolation. Unemployment has a rich history, from the Great Depression to modern recessions in LICs, with different types (frictional, structural, cyclical, technological, classical) requiring different policy responses. The three main theoretical perspectives—Classical (voluntary, wage-induced), Keynesian (demand-deficient), and Monetarist (natural rate, frictional/structural)—offer contrasting diagnoses and prescriptions: Classical emphasizes wage flexibility, Keynesian advocates government spending, and Monetarist focuses on supply-side measures and information improvements. The labour market diagram with LF, AJ, and LD curves is the essential analytical tool for understanding these views. Understanding definitional problems like underemployment and disguised unemployment is crucial for correctly interpreting official statistics.
🧠 Quick Revision Questions
- What are the four big macroeconomic issues, and why is it important to study their inter-relationships?
- Define the unemployment rate and explain the difference between frictional, structural, and cyclical unemployment.
- What are the costs of involuntary unemployment for society and the individual?
- In the Classical view, what causes unemployment and what is the policy prescription? In the Keynesian view?
- How do Monetarists explain the natural rate of unemployment, and what supply-side measures do they recommend?
📘 Lecture 34 — The Four Big Macroeconomic Issues and Their Inter-Relationships (Continued)
📖 Overview: This lecture continues the discussion of major macroeconomic issues by exploring hysteresis in unemployment, then delves deeply into inflation and deflation. It covers measurement methods, costs, and three competing theories of inflation's causes—Keynesian demand-pull, cost-push, and monetarist views—equipping students to analyze real-world price stability challenges.
🗂️ Topics Covered
The lecture begins by explaining hysteresis—the permanent effects of temporary economic changes, particularly on unemployment. It then defines inflation and deflation, explains how inflation is measured using price indices like the CPI and PPI, and discusses the ideal inflation rate for different economies. The costs of inflation are examined, including redistribution of income, increased uncertainty, balance of payments problems, and resource wastage. Finally, three major theories about inflation's causes are presented: the traditional Keynesian view with the Phillips curve, the cost-push inflation theory, and the monetarist quantity theory of money.
📝 Lecture Summary
Hysteresis
Hysteresis refers to the permanent effects of a temporary change. In the context of unemployment, a temporary fall in demand leading to lay-offs can have more permanent effects. Laid-off workers become disheartened after failing initial job interviews; their skills rust, they become accustomed to unemployment benefits, and are less likely to find jobs. Firms' recruitment behavior also slows—they post fewer adverts, decreasing the likelihood of instant rehiring. The result is longer spells of unemployment. Generally, the likelihood of a person leaving unemployment falls as the duration of unemployment lengthens.
🔑 Definition — Hysteresis: The permanent effects of a temporary change, especially in unemployment where temporary layoffs lead to long-term joblessness due to discouraged workers and slowed firm recruitment.
Inflation and Deflation
Inflation is a situation of continuous rise in the general price level. Deflation is the opposite—when the general level of prices falls. The rate of inflation is the percentage annual increase in the average price level. Pure inflation is a special case where prices of all goods and services rise at the same rate. For example, if apples, shirts, and cars cost Rs. 5, Rs. 100, and Rs. 400,000 in 1992, and Rs. 6, Rs. 120, and Rs. 480,000 in 1993, there was pure inflation of 20% in 1993 (over 1992). If 1994 prices are Rs. 9, Rs. 180, and Rs. 720,000, there was pure inflation of 50% in 1994 (over 1993).
🔑 Definition — Inflation: A continuous rise in the general price level. 🔑 Definition — Deflation: A fall in the general level of prices. 🔑 Definition — Pure Inflation: A special case where all goods and services prices rise at the same rate.
Measurement of Inflation
Inflation (in % p.a.) is measured as: [(Pₜ - Pₜ₋₁) / Pₜ₋₁] × 100, where Pₜ is the average price level in year t, and Pₜ₋₁ is the average price level in period t-1. The average price level usually refers to the value of an index like the Consumer Price Index (CPI) or Producer Price Index (PPI), which weights prices of goods according to their share in total nominal GDP.
📐 Formula: Inflation Rate = [(Pₜ - Pₜ₋₁) / Pₜ₋₁] × 100 → The percentage change in average price level from one period to the next.
📌 Example: If the price level on 30th June 2000 was 100, and on 30th June 2001 was 105, then inflation = [(105 - 100) / 100] × 100 = 5%. Similarly, 2002: [(107 - 105) / 105] × 100 = 1.9%. 2003: [(120 - 107) / 107] × 100 = 12.1%.
Ideal Inflation Rate for an Economy: A small positive inflation of about 3% is considered healthy for mature HICs, while 7% is acceptable for fast-growing emerging economies. Rates above 10% are generally undesirable. Some countries (especially in Latin America) have recorded hyperinflation—rates in the 100s and 1000s of percentage p.a. The first country to suffer severe hyperinflation was Germany in the 1920s, burdened with high debt from WWI obligations; the government printed money, plunging the economy into hyperinflation.
The Choice of Price Index: The choice of price index affects what can be said about inflation. Overall inflation may be high while food inflation is low. Different indices exist for students, health, housing, etc. The most commonly used index for overall inflation is the retail or Consumer Price Index (CPI).
The CPI and PPI: CPI measures the cost of a fixed basket of consumer goods, with each commodity weighted by its share of consumer expenditures. The Producer Price Index (PPI) measures prices of goods and raw materials sold at wholesale to producers (e.g., steel, wheat, cotton). A related concept is wage inflation, which measures the rate of increase of average wages. If wage inflation exceeds price inflation, real wages are rising (and vice versa). The practice of linking wages to prices is called "index-linking" and is common in many Latin American countries.
🔑 Definition — Consumer Price Index (CPI): An index measuring the cost of a fixed basket of consumer goods weighted by expenditure shares. 🔑 Definition — Producer Price Index (PPI): An index of prices of goods and raw materials sold at wholesale to producers. 🔑 Definition — Wage Inflation: The rate of increase of average wages in the economy.
Costs of Inflation
a. Redistribution of income: Inflation redistributes income away from those on fixed incomes (or without bargaining power to renegotiate wages) toward owners of land, property, or assets whose prices are sensitive to the general price level. In many African and South Asian countries, wage earners (especially in government) had lost up to 90% of their purchasing power from the 1960s by the 1990s due to gradual but persistent real wage decline, leading to corruption and inefficiency.
b. Increased uncertainty for firms: High inflation is most volatile at high levels—fluctuation around 25% is much higher than around 2%. This translates into uncertainty about prices, inability to accurately forecast revenues and expenditures, and therefore lower investment ex-ante.
c. Balance of payments problems: Rising domestic prices, if not offset by depreciation of the exchange rate, can lead to an overvalued currency, declining exports, and rising imports—deteriorating the current account.
d. Resource wastage: Extra resources (time and money) are dedicated merely to hedge against purchasing power erosion. Restaurants change menus frequently; price lists are issued more often.
💡 Why this matters: Understanding these costs helps policymakers balance the trade-offs between inflation and other macroeconomic goals like growth, employment, and external stability.
Theories About the Causes of Inflation: Three Views About Inflation
1- Traditional Keynesian View Keynes sees inflation and unemployment as opposite sides of the same coin. Inflation results from excessive aggregate demand (demand-pull inflation). Assuming increases in aggregate demand have output and employment impacts, the relationship between inflation and unemployment is a trade-off—a downward-sloping curve called the Phillips curve, named after the economist who first documented it for the UK in the 1950s and 1960s. The trade-off: Lower unemployment can only be achieved at the cost of higher inflation. The policy prescription: reduce aggregate demand through contractionary fiscal and/or monetary policies.
Demand-Pull Inflation: In AD-AS space, a rightward shift of AD (from AD₁ to AD₂ to AD₃ to AD₄) raises prices (from P₀ to P₁) while output rises toward Y*.
Phillips Curve: Shows an inverse relationship between unemployment and inflation rate. The cost of reducing inflation is unemployment, and the cost of reducing unemployment is inflation.
🔑 Definition — Demand-Pull Inflation: Inflation caused by excessive aggregate demand. 🔑 Definition — Phillips Curve: A curve showing the inverse (trade-off) relationship between unemployment and inflation rate.
2- Cost-Push Inflation This view emerged in the 1970s when the world faced stagflation—rising prices with high unemployment—which demand-pull theories could not explain. Two oil price shocks in the 1970s were supply-side shocks that increased production costs. In AD-AS space, such a shock shifts the AS curve left (and up), causing prices to rise and output (and employment) to fall. In Phillips curve space, this shifts the curve right, reflecting a structural shift in the inflation-unemployment trade-off. The resulting higher inflation (at any unemployment level) was called cost-push inflation. Policy prescriptions include supply-side measures: developing alternative energy sources, fuel-efficient technologies, production cost reduction methods, reducing tax distortions, increasing competition, and removing price floors. Keynesian demand management was not seen as relevant.
Cost-Push Inflation: A negative supply shock shifts AS left to AS', causing prices to rise from P to P' while output falls from Y to Y'.
It is important to note that sometimes what appears as cost-push inflation is actually driven by higher demand—this is called cost-push illusion. For example, increased demand for property raises housing prices, causing rents to rise, workers to demand higher wages, firms' production costs to increase, and goods prices to rise. At every point costs are rising, but the cause is higher demand for property.
🔑 Definition — Cost-Push Inflation: Inflation caused by supply-side shocks that increase production costs, shifting the AS curve leftward. 🔑 Definition — Stagflation: A situation of simultaneously rising prices and high unemployment. 🔑 Definition — Cost-Push Illusion: A situation where rising costs appear to be the cause of inflation, but the underlying driver is actually higher demand.
3- Monetarist View (Quantity Theory of Money) [Note: This section was announced in the lecture outline but its full content was not provided in the lecture text. Based on the structure, it would explain how changes in money supply cause inflation, as per the equation MV = PY.]
🔑 Definition — Quantity Theory of Money: The theory that changes in the money supply directly affect the price level (inflation) when velocity and output are stable.
⭐ Key Takeaways
The most critical concepts from this lecture are: Hysteresis explains why temporary economic shocks can cause permanent increases in unemployment—workers become discouraged and firms slow recruitment. Inflation is measured as the percentage change in price indices like CPI or PPI, and a small positive rate (3% for mature economies, 7% for emerging ones) is considered healthy; rates above 10% are undesirable and can lead to hyperinflation. The four major costs of inflation are redistributing income from fixed-income earners to asset owners, increasing uncertainty that reduces investment, causing balance of payments problems, and wasting resources on hedging activities. The three theories of inflation—demand-pull (Keynesian, shown by the Phillips curve trade-off), cost-push (supply-side shocks causing stagflation), and the monetarist quantity theory—offer different diagnoses and policy prescriptions. Understanding these inter-relationships is essential for evaluating how governments manage the four big macroeconomic issues of growth, unemployment, inflation, and external balance.
🧠 Quick Revision Questions
-
Explain the concept of hysteresis in the context of unemployment. What happens to workers and firms that makes temporary layoffs permanent?
-
Calculate the inflation rate if the price level in year 1 is 120 and in year 2 is 132. What type of inflation would it be if all prices in the economy rose by the same percentage?
-
List and explain four costs of inflation. Why does high inflation lead to lower investment?
-
What is the Phillips curve trade-off? According to the traditional Keynesian view, what policy would reduce inflation and at what cost?
-
Differentiate between demand-pull inflation and cost-push inflation. What economic phenomenon in the 1970s led to the development of the cost-push theory?
📘 Lecture 35 — The Four Big Macroeconomic Issues and Their Inter-Relationships (Continued)
📖 Overview: This lecture continues the exploration of macroeconomic issues by examining the Monetarist view on inflation and its relationship with unemployment via the Phillips Curve. It then introduces the Balance of Payments (BOP) as a key international economic concept, explaining its components through the market for foreign exchange and the history of Pakistan's exchange rate regime.
🗂️ Topics Covered
This lecture first analyzes the Monetarist explanation of inflation using the Quantity Theory of Money (MV=PQ) and its implications for the Phillips Curve, emphasizing the role of money illusion and adaptive expectations. It then shifts to define the Balance of Payments (BOP) as a record of international transactions. This is followed by an explanation of the foreign exchange market, the concept of the exchange rate, and a historical overview of Pakistan's exchange rate policies.
📝 Lecture Summary
3- The Monetarists View
Monetarists explain inflation using the Quantity Theory of Money (QTM). The equation is MV = PQ, where M is the money supply, V is its velocity, P is the price level, and Q is real output. Monetarists assume V is constant and Q is at its natural rate (Q*). Therefore, changes in the money supply (M) directly cause changes in the price level (P). Their solution to inflation is a stable money supply that grows at the same rate as natural output. 🔑 Definition — Quantity Theory of Money (QTM): A theory emphasizing the direct positive relationship between the quantity of money and the overall price level. 📐 Formula: MV = PQ → The money supply (M) times its velocity (V) equals the price level (P) times real output (Q). If V and Q are stable, changes in M directly change P. 📌 Example: If M increases by 5% and V and Q* are constant, the QTM predicts P will also rise by 5%, causing inflation.
For Monetarists, the financing of a fiscal deficit is key. Financing by borrowing from the central bank (printing money) is inflationary, whereas borrowing from banks or savers is not.
Monetarism and Philips curve: Monetarists believe the economy gravitates toward a natural rate of unemployment. Any positive effect from inflationary demand policies is temporary and depends on money illusion—when agents mistake nominal price increases for real gains. This leads to temporary increases in spending. 🔑 Definition — Money illusion: The tendency of people to base decisions on nominal values rather than real values, confusing changes in money wages/prices with changes in real wages/prices.
With adaptive expectations, agents learn from past inflation. They raise their expectations for the next period, so the government must create even higher inflation to fool them again. Over time, this process results in a vertical Phillips curve in the long run, showing no trade-off between inflation and unemployment. Expansionary policy only causes higher inflation.
The Balance of Payments (BOP)
The Balance of Payments (BOP) is an accounting record of all economic transactions between a country and the rest of the world over a specific period, usually a year. It includes goods, services, financial capital, and transfers. It is a key indicator of a country's international trade status and has a net capital outflow. 🔑 Definition — Balance of Payments (BOP): A systematic record of all economic transactions between residents of one country and the rest of the world.
The Market for Foreign Exchange
The foreign exchange market operates like any other market, with an upward-sloping supply curve and a downward-sloping demand curve for a currency (e.g., dollars in Pakistan). The "price" is the exchange rate (e.g., rupees per dollar). 🔑 Definition — Exchange Rate (FX Rate): The price of one currency in terms of another.
History of Exchange Rate in Pakistan
Pakistan's exchange rate regime has evolved over decades:
- Before 1970s: Pegged to the Pound Sterling.
- 1971: Linked to the U.S. Dollar.
- 1982: Adopted a controlled floating basis linked to a trade-weighted currency basket due to a budget deficit.
- 1998: Used a multiple exchange rate system (official, Floating Interbank Rate, and composite rate) during a financial crisis.
- 1999: Unified the rates and pegged to the U.S. within a band.
- 2000: The band was removed, and Pakistan now maintains a floating rate system where banks quote their own rates. The State Bank of Pakistan (SBP) authorizes institutions to deal in the market.
⭐ Key Takeaways
A student must remember that the Monetarist view on inflation is rooted in the Quantity Theory of Money (MV=PQ), which implies that controlling the money supply is the key to stable prices. They argued that the Phillips Curve is vertical in the long run, meaning no permanent trade-off exists between inflation and unemployment due to adaptive expectations and the eventual disappearance of money illusion. The Balance of Payments is the comprehensive record of a country's international transactions. The foreign exchange market determines the exchange rate, which has evolved in Pakistan from fixed pegs to a market-driven floating system.
🧠 Quick Revision Questions
- State the Quantity Theory of Money equation. According to Monetarists, what two factors are assumed stable?
- What is "money illusion"? How does it relate to the short-run impact of expansionary monetary policy?
- What is a "vertical Phillips curve" and what does it imply about the long-run relationship between inflation and unemployment?
- List three types of economic transactions recorded in the Balance of Payments.
- Describe the current exchange rate regime in Pakistan and name the authority that regulates the foreign exchange market.
📘 Lecture 36 — The Four Big Macroeconomic Issues and Their Inter-Relationships (Continued)
📖 Overview: This lecture continues the exploration of major macroeconomic issues by focusing on exchange rate dynamics and the balance of payments. It defines key concepts like devaluation and appreciation, explains the forces of supply and demand in the foreign exchange market, and details the components of the Balance of Payments (BOPs), including the current and capital accounts. Understanding these inter-relationships is crucial for analyzing a nation's external economic position and policy options.
🗂️ Topics Covered
This lecture covers the formal definitions of devaluation, revaluation, appreciation, and depreciation. It then analyzes the market for foreign exchange, explaining the forces of demand and supply that shift its curves and how equilibrium is reached under both fixed and floating exchange rate regimes. Finally, the lecture breaks down the three parts of the Balance of Payments (Current Account, Capital Account, and Changes to Reserves), discusses whether a current account deficit is necessarily bad, and explores methods to restore balance, including the role of the real exchange rate and devaluation.
📝 Lecture Summary
DEVALUATION
Devaluation is the act of reducing the price (exchange rate) of one nation's currency in terms of other currencies. This is usually done by a government to lower the price of the country's exports and raise the price of foreign imports, which ultimately results in greater domestic production. A government devalues its currency by actively selling it and buying foreign currencies through the foreign exchange market.
🔑 Definition — Devaluation: An official reduction in the value of a currency relative to other currencies under a fixed exchange rate system, aimed at boosting exports and reducing imports.
REVALUATION
Revaluation is the act of increasing the price (exchange rate) of one nation's currency in terms of other currencies. This is done by the government if it wants to raise the price of the country's exports and lower the price of foreign imports. This is an appropriate action if the country is running an undesired trade surplus with other countries. The procedure for revaluation is for the government to buy the nation's currency and/or sell foreign currencies through the foreign exchange market.
🔑 Definition — Revaluation: An official increase in the value of a currency relative to other currencies under a fixed exchange rate system, aimed at reducing a trade surplus.
APPRECIATION
Appreciation is a more or less permanent increase in value or price. "More or less permanent" doesn't include temporary, short-term jumps in price that are common in many markets. Appreciation is only those price increases that reflect greater consumer satisfaction and thus value. While all sorts of stuff can appreciate in value, some of the more common ones are real estate, works of art, corporate stock, and money. In particular, the appreciation of a nation's money is seen by an increase in the exchange rate caused by a growing, expanding, and healthy economy.
🔑 Definition — Appreciation: A long-term increase in the value of a currency under a floating exchange rate system, driven by market forces like a strong economy.
DEPRECIATION
Depreciation is a more or less permanent decrease in value or price. "More or less permanent" doesn't include temporary, short-term drops in price that are common in many markets. It's only those price declines that reflect a reduction in consumer satisfaction. While all sorts of stuff can depreciate in value, some of the more common ones are capital, real estate, corporate stock, and money. The depreciation of capital results from the rigors of production and affects our economy's ability to produce stuff. A sizable portion of our annual investment is thus needed to replace depreciated capital. The depreciation of a nation's money is seen as an increase in the exchange rate.
🔑 Definition — Depreciation: A long-term decrease in the value of a currency under a floating exchange rate system, driven by market forces.
THE FORCES OF DEMAND AND SUPPLY IN FOREIGN EXCHANGE MARKET
The forces of demand and supply in the foreign exchange market determine the exchange rate. The supply curve for dollars can shift to the right (increase) due to transactions that bring dollars into the country, such as net inflows of US investment into Pakistan, Pakistani exports to the US, and remittances from Pakistanis working in the US. The demand curve for dollars increases due to transactions that require dollars, such as Pakistani imports of US goods, Pakistani travelers traveling to the US, Pakistani students paying for study in US universities, and profits repatriated to the US by US firms operating in Pakistan.
Any transaction which causes the supply curve of dollars to shift to the right is recorded with a positive sign on the BOPs (as it corresponds to an inflow of dollars), while any transaction which causes the demand curve to shift to the right is recorded with a negative sign on the BOPs.
EQUILIBRIUM IN THE MARKET OF FOREIGN EXCHANGE
Equilibrium in the market for foreign exchange occurs at the point of intersection of the supply and demand curves. In BOP terminology, this is when all the +vs and the –ves balance; i.e. the BOPs is zero (external balance).
When the exchange rate is fixed, the government has to make up for any excess or shortfall in the market. If the supply curve shifts to the right, creating an excess supply of dollars, the government must step in and purchase those excess dollars, pumping the equivalent local currency into the economy. If there is a rightward shift in the demand curve, creating a situation of excess demand for dollars, the government must supply those dollars from its coffers, causing its foreign exchange reserves to fall and the local currency supply to contract.
To let the exchange rate float freely is to allow the price mechanism to bring about automatic equilibrium. If there is an excess supply of dollars, the price of the dollar falls (the rupee appreciates). Conversely, if there is an excess demand for dollars, the exchange rate rises (the rupee depreciates). Note that an increase (decrease) in the price of the dollar is equivalent to a depreciation (appreciation) of the rupee.
PARTS OF BOP
The BOPs can be divided into three parts: i. Current account, ii. Capital account and iii. Changes to reserves.
(1) THE CURRENT ACCOUNT
The current account balance is essentially the trade balance (exports minus imports), but with net factor receipts from abroad added. If the exchange rate is fixed, changes in reserves must mirror the combined balance on the current and capital accounts to bring the overall BOPs to zero. If the exchange rate is floating, changes to reserves can remain zero, as the adjustment burden is borne by the exchange rate.
External transactions which have no long-term (or future) flow implications for the current account are recorded on the current account. Thus exports, imports, and factor payments (foreign workers’ outward remittances, interest on foreign debt, and dividends on profits of foreign firms) and factor receipts (overseas Pakistanis’ inwards worker remittances, interest earned on foreign assets held, dividends earned by Pakistani firms abroad) are all recorded on the current account.
In the long-term, the current account and capital account should usually mirror each other. So if the current account is in deficit, you would expect the country to be borrowing or attracting foreign investment on the capital account. Similarly, if the current account is in surplus, you would expect the country to be lending or investing outside the country.
Current account balance (+ or -): (i) Goods or visible balance (+ or -) (+) Exports (-) Imports (ii) Services or invisible balance (+ or -) (+) Exports (-) Imports (iii) Income and transfers (+ or -) (+) Factor income from abroad (e.g., worker remittances, dividends, interest) (-) Factor payments (e.g., MNC profits, interest on debt)
(2) THE CAPITAL ACCOUNT
The capital account generally provides a direct picture of the net asset position of a country vis-à-vis the rest of the world. If the capital account stays in surplus year after year, this indicates the country’s increasing indebtedness to the rest of the world. If it stays in deficit year after year, this means the country’s indebtedness to the rest of the world is falling.
At the introductory level, BOP problems normally refer to a deficit on the current account, since the capital account is assumed to be passive. This raises two questions:
a. Is a current account deficit necessarily bad? The answer is no. Recalling the condition for macroeconomic equilibrium S+T+M = I+G+X, and rearranging, we can get {M-X} = [I-S] + (G-T). The {} term is the current account or trade balance, the [] term gives the private sector resource deficit, and the () term is the government fiscal deficit. If M>X because G>T (government spending in excess of its resources), the deficit might be unsustainable (bad). However, a trade deficit which finances private investment that would otherwise not have been possible is likely to be desirable, especially if the private sector is investing in industries with future export potential.
💡 Why this matters: This shows that a current account deficit is not inherently problematic; its sustainability depends on whether it finances unproductive government spending or productive private investment.
b. How can a current account deficit be restored to balance? Perennial current account deficits only obtain under fixed exchange rates. One solution is economic deflation, where lower income reduces import spending. A less painful solution is devaluation. Devaluation attempts to bring the exchange rate in line with its long-run equilibrium level, i.e., a level consistent with international competitiveness.
Competitiveness is simply defined as the real exchange rate (RER), where: 📐 Formula: RER = (Pf/Pd) * NER → This formula shows that, given a fixed nominal exchange rate (NER), if inflation is higher in Pakistan (relative to the US), Pakistani exports will become less competitive.
However, devaluation only works if the country’s exports and imports are elastic (the volume effect dominates the price effect), the country has excess productive capacity to meet higher export demand, and the country does not have a very high foreign debt whose burden increases significantly after devaluation.
Capital account (+ or -): (+) Incoming FDI, FPI or other private capital (-) Outgoing FDI, FPI or other private capital (+) Borrowing, aid inflows (-) Payments of debt principal, aid outflows
(3) CHANGES TO OFFICIAL FOREIGN EXCHANGE RESERVES (+ OR -)
(+) Sales of foreign exchange by government, i.e., drawdown of reserves (-) Purchase of foreign exchange by government, i.e., build-up of reserves Balance of payments (1+2+3 =0, or net errors and omissions)
⭐ Key Takeaways
This lecture clarifies that devaluation and revaluation are policy tools under fixed exchange rates, while appreciation and depreciation are market-driven outcomes under floating rates. A critical insight is that any transaction bringing dollars into a country shifts the supply curve rightward (recorded as a + on the BOP), while any transaction requiring dollars shifts the demand curve rightward (recorded as a – on the BOP). The lecture demonstrates that a current account deficit is not inherently bad; its sustainability depends on whether it arises from productive private investment or unproductive government spending. Finally, devaluation as a policy solution is conditional on export/import elasticity, excess productive capacity, and manageable foreign debt, and the real exchange rate formula provides a key measure of international competitiveness.
🧠 Quick Revision Questions
- Distinguish between devaluation and depreciation. Under what exchange rate regime does each typically occur?
- Give two examples of transactions that would cause a rightward shift in the supply curve for dollars in Pakistan's foreign exchange market. Are these recorded as a positive or negative entry on the BOP?
- Under a fixed exchange rate system, what action must a government take if the demand for dollars increases, creating an excess demand at the current rate?
- According to the lecture, under what specific condition is a current account deficit considered "good" or "desirable"?
- State the formula for the real exchange rate (RER). Explain how higher inflation in the home country (Pakistan) relative to the foreign country (US) affects the RER and a country's exports, assuming a fixed nominal exchange rate.