π Lecture 28 β Macroeconomic Data & National Income Accounting
π Overview: This lecture examines how macroeconomic data can be manipulated or misinterpreted and introduces the core concepts of national income accounting. It covers the definition and measurement of GDP, related aggregates like GNP and NNP, and the crucial distinction between nominal and real data, culminating in the GDP deflator and purchasing power parity.
ποΈ Topics Covered
The lecture begins by discussing the pitfalls of using macroeconomic data, including selective use, scale manipulation, and the difference between nominal and real values. It then defines Gross Domestic Product (GDP) and distinguishes between stock and flow variables. The three equivalent methods of measuring GDP (product, expenditure, and income) are explained, alongside concepts like value added and final vs. intermediate goods. The lecture further develops related aggregates (NDP, GNP, NNP) and addresses the conversion of nominal to real GDP using the GDP deflator, per capita GDP, and purchasing power parity. It concludes with a discussion of the drawbacks of GDP-based measures.
π Lecture Summary
THE USE OF MACROECONOMIC DATA
Macroeconomic statistics are susceptible to both manipulation and misinterpretation. To understand what a number truly means, you must consider factors like data being used selectively (e.g., overall inflation might rise but food inflation falls), scales on graphs being manipulated to paint a dramatic or benign picture, and whether values are absolute or proportionate (e.g., paying higher taxes, but as a proportion of rising income, the tax burden may have fallen). Questions of distribution might be ignored, where the overall economy becomes richer but the rich get richer and the poor poorer.
Data might be nominal or real. Nominal data is recorded in money terms, unadjusted for inflation. Real data is nominal data adjusted for changes in prices. Most macroeconomic data is presented in real terms for meaningful comparisons over time and across countries. Other pitfalls include excluding certain time periods, ignoring per capita considerations (e.g., national income rises but per capita income falls due to population growth), and the same issue applying to growth rates (e.g., national income growing at 5% p.a. but population at 6% p.a., meaning per capita income falls by 1% p.a.). π Definition β Nominal Data: Data expressed in monetary terms, not adjusted for inflation. π Definition β Real Data: Nominal data adjusted for changes in prices (inflation), allowing for meaningful intertemporal and cross-country comparisons.
NATIONAL INCOME ACCOUNTING
Gross Domestic Product (GDP) is the value of the total final output produced inside a country during a given year. GDP is a flow figure (accruing over a period of time, like one year), as opposed to a stock figure (which is defined for a specific point in time). Flows accumulate into stocks; changes in stocks equal flows. For example, money is a stock, but GDP is the flow of production during a year.
The change in stocks measures changes in the value of unsold inventories. When aggregate demand is high, the value of stocks held by businesses tends to fall (de-stocking). When demand falls, businesses might have an unplanned increase in unsold output (rise in stocks). Changes in stocks are a leading indicator of where the economy is heading. π Definition β Stock: A variable measured at a specific point in time (e.g., population, capital, money). π Definition β Flow: A variable measured over a period of time (e.g., GDP, income).
METHODS OF MEASURING GDP
There are three equivalent ways of measuring GDP:
- The product or value added method: sums the value added by all productive entities.
- The expenditure method: sums the value of all final goods transactions.
- The factor income method: sums all incomes earned by factors of production (rent, wages, interest, profit).
These methods are equivalent because, in an ex-post sense, aggregate supply (i) = aggregate demand (ii) = national income (iii). π Definition β Value Added: The difference between the value of goods produced and the cost of materials and supplies used in producing them. It represents the increase in value at each stage of production. π Formula: Value Added = Value of Output - Value of Inputs (Materials & Supplies) π Example: If a firm spends Rs. 500 making a good (inputs) and sells it for Rs. 750 (output), then the value added is Rs. 250.
Final and Intermediate Goods: Final goods are meant for direct use by the end consumer. Intermediate goods are intended for further processing. For GDP calculation, only final goods are included to avoid double counting. The total value of all transactions is always greater than the GDP, which equals the sum of value added at each stage. π Example:
- Firm A sells steel to Firm B for Rs 100,000.
- Firm B processes it into a car body and sells it to Firm C for Rs 200,000.
- Firm C assembles the car and sells it to a consumer for Rs 450,000.
- Total Value of Transactions: 100,000 + 200,000 + 450,000 = 750,000
- GDP (Sum of Value Added): 100,000 + (200,000 β 100,000) + (450,000 β 200,000) = 100,000 + 100,000 + 250,000 = Rs 450,000.
- This is also equal to the total expenditure of the consumer on the car (Rs 450,000).
MACROECONOMIC DATA & NATIONAL INCOME ACCOUNTING (CONTINUED)
GDP at factor cost and market prices: Factor price is the price at which a firm sells its final output. Market price includes the factor price plus any indirect taxes (e.g., sales tax). π Formula: GDP at factor cost = GDP at market price β Indirect taxes
Net Domestic Product (NDP): NDP is GDP adjusted for the consumption of capital. π Definition β Depreciation: The reduction in the value of a capital good due to wear and tear during production. π Formula: NDP = GDP β Depreciation allowance
Gross National Product (GNP): GNP is the total market value of all final goods and services produced by the factors of production owned by the citizens of a country, regardless of where they are located. π Formula: GNP = GDP + Net factor income from abroad π Example: Income earned by a Pakistani citizen working in the US is part of Pakistanβs GNP but not its GDP. Income earned by a US company in Pakistan is part of Pakistanβs GDP but not its GNP.
Net National Product (NNP): NNP is GNP adjusted for depreciation. NNP is often referred to as National Income (NI). π Formula: NNP = GNP β Depreciation allowance
Real vs. Nominal GDP: Nominal GDP is the total market value of output measured in current prices. Real GDP is the total market value of output measured in constant prices (from a base year), thereby excluding the effect of price changes and focusing on the volume of goods and services produced.
PRICE DEFLATOR
The process of converting nominal GDP to real GDP is called deflation. The tool used is the GDP Deflator, which is a price index that measures the change in the average price level of all goods and services included in GDP. π Formula: GDP Deflator = (Nominal GDP / Real GDP) Γ 100 π Formula: Real GDP_Year_a = Nominal GDP_Year_a Γ (Price Index_Base_Year / Price Index_Year_a) π Example:
- Nominal GDP in 1994 = $300 billion; Nominal GDP in 1985 = $150 billion.
- Prices rose by 50% between 1985 and 1994.
- Base Year Price Index = 100; 1994 Price Index = 150.
- Real GDP in 1994 (in 1985 prices) = $300 billion Γ (100/150) = $200 billion. π Example (Hypothetical Economy): | Item | Year 1 | Year 2 | | :--- | :--- | :--- | | Apples Produced | 100 | 150 | | Chicken Produced | 100 | 140 | | Cost per Apple | Rs 2 | Rs 4 | | Cost per Chicken | Rs 4 | Rs 6 |
- Nominal GDP Year 1: (100Γ2) + (100Γ4) = Rs 600
- Nominal GDP Year 2: (150Γ4) + (140Γ6) = Rs 1440
- Nominal GDP Growth: (1440-600)/600 = 140%
- Year 2 Price Index (Year 1 Prices): [(150Γ2)+(140Γ4)] / (150+140) = 860/290 = 2.966
- Year 2 Price Index (Year 2 Prices): [(150Γ4)+(140Γ6)] / (150+140) = 1440/290 = 4.966
- GDP Deflator: (4.966 / 2.966) Γ 100 = 167.4% (price level in Year 2 relative to Year 1)
- Real GDP in Year 2: 1440 Γ (100/167.4) = Rs 860
- Real GDP Growth: (860-600)/600 = 43%
Per Capita GDP: Total GDP divided by the total population. Purchasing Power Parity (PPP): A measure of GDP that adjusts for the fact that a given amount of income can buy different quantities of goods and services in different countries. PPP GDP per capita is a more sensible measure for cross-country comparisons of living standards.
Other Income Concepts:
- Personal Income: The total income received by individuals from all sources before personal taxes.
- Disposable Income: Personal income minus direct taxes (e.g., income tax). It is the income available for consumption or saving. π Formula: Disposable Income = Personal Income β Direct Taxes
DRAWBACKS OF GDP BASED MEASURES
There are several caveats with using GDP as a measure of national income and welfare. i. GDP excludes productive activities in the informal economy (e.g., a person painting their own house, a woman cooking at home), which can be significant in lower-income countries. ii. GDP cannot include the black or illegal economy (e.g., banned goods produced and exported illegally). iii. A GDP-based measure of welfare needs to be corrected for externalities. For example, rapid GDP growth that causes rising environmental pollution or depletes non-renewable resources will overstate the true economic performance and ignore long-term risks.
β Key Takeaways
The most critical point from this lecture is that GDP is a flow measure of the total final output produced within a country's borders, and it can be measured equivalently via product (value added), expenditure, or income methods. You must understand the crucial difference between nominal GDP (current prices) and real GDP (constant prices), and be able to calculate the GDP deflator to convert between them. The lecture also highlights that related aggregates like GNP (output by citizens) and NNP (adjusted for depreciation) exist, and that while GDP is a key metric, it has significant drawbacks, including its exclusion of the informal and illegal economies and its failure to account for negative externalities like pollution.
π§ Quick Revision Questions
- What is the single most important difference between a "stock" variable and a "flow" variable? Give one example of each from the lecture.
- Explain why the sum of all transactions in an economy is greater than its GDP. Use the concepts of "final goods," "intermediate goods," and "value added" in your answer.
- A country's nominal GDP is $500 billion and its GDP deflator is 125. Calculate the country's Real GDP.
- If a Pakistani company earns profits from a factory it operates in Saudi Arabia, would this profit be included in Pakistan's GDP, its GNP, or both? Explain.
- List two major drawbacks of using basic GDP per capita as a measure for comparing the well-being of people in two different countries.
π Lecture 30 β Macroeconomic Equilibrium; The Determination of Equilibrium Income
π Overview: This lecture explores how macroeconomic equilibrium is determined through the circular flow of income, focusing on the Classical and Keynesian perspectives. It introduces key variables, the concepts of leakages and injections, and the consumption and saving functions, which are essential for understanding how economies reach equilibrium.
ποΈ Topics Covered
The lecture covers the key variables of the macroeconomic model (Y, C, S, I, T, G, M, X), the circular flow of money, the concept of leakages and injections (including the injection-leakage model), macroeconomic equilibrium from Classical and Keynesian views, consumption and the consumption function, the saving function, and the calculation of APC, APS, MPC, and MPS.
π Lecture Summary
THE KEY VARIABLES OF THE MACROECONOMIC MODEL
The circular flow of money in the economy helps illustrate the Classical and Keynesian notions of macroeconomic equilibrium. The circular flow depicts incomes flowing from firms to households in return for factor services supplied by households to firms, and subsequently these household incomes being expended on goods and services supplied by firms to households.
The key variables for a macroeconomic model are:
- Y = Income
- C = Consumption
- S = Savings
- I = Investment
- T = Taxes
- G = Government Expenditures
- M = Imports
- X = Exports
CIRCULAR FLOW
Circular flow refers to the continuous movement of production, income, and resources between producers and consumers. This flow moves through product markets as the gross domestic product of our economy and is then the revenue received by the business sector in payment for this production. This stream of revenue then flows through resource markets as payments by businesses for the resources employed in production. The payments received by resource owners, however, is nothing more than the income of the household sector. The resource owners of the household sector use this income to purchase goods and services through the product markets, coming full circle to where we began.
THE CONCEPT OF LEAKAGES AND INJECTIONS
A leakage or withdrawal is any use of the income received by households that does not return as revenue to domestic firms. Savings, taxes and imports are examples of leakages as this money does not fall as expenditure on goods and firms produced by domestic firms.
Injections are payments to firms not originating from households: government spending, firms' investment and exports are all examples of injections into the circular flow.
π Definition β Injection: A non-consumption expenditure on gross domestic product, including investment expenditures, government purchases, and exports. Injections are combined with leakages in the injection-leakage model used to identify equilibrium aggregate output in Keynesian economics.
π Definition β Leakage/Withdrawal: Non-consumption uses of income, including saving, taxes, and imports. Leakages are combined with injections in the injection-leakage model used to identify equilibrium aggregate output in Keynesian economics.
π Definition β Injection-leakage model: A model used in Keynesian economics based on the equality of non-consumption expenditures (or injections) and non-consumption uses of income (leakages). On one side of the equality is saving, taxes, and imports β the non-consumption leakages. On the other side is investment, government purchases, and exports β the non-consumption injections.
MACROECONOMIC EQUILIBRIUM: CLASSICAL VIEW
Macroeconomic equilibrium in a Classical sense refers to joint equilibrium in all the underlying sectors or markets of the economy. So S must equal I (loanable funds market; key players are banks and financial markets), G must equal T (fiscal sector; key player is government) and X = M (external sector, key players are importers and exporters). Any disequilibrium at the macro level was attributable to disequilibrium in one or more of these individual markets.
MACROECONOMIC EQUILIBRIUM: KEYNESIAN VIEW
Macroeconomic equilibrium in a Keynesian sense obtains when total injections equal total leakages (or total withdrawals), or aggregate supply equals aggregate demand. These are two equivalent notions of Keynesian equilibrium and can be expressed respectively as:
S + T + M β‘ I + G + X and AS = Y = AD β‘ C + I + G + (X-M)
where AS is aggregate supply, Y is national income, AD is aggregate demand, C is consumption, I is investment, G is government spending, X is exports, M is imports, S is saving and T is taxes.
Withdrawal = Injection By definition β S + T + M = I + G + X (Adding C to both sides) C + S + T + M = C + I + G + X (Now taking M on other side) C + S + T = C + I + G + X β M
Where:
- M = Cf + If + Gf
- Cd = C β Cf
- Id = I β If
- Gd = G β Gf
R.H.S = (C β Cf) + (I β If) + (G β Gf) + X = Cd + Id + Gd + X This equals total expenditure on domestic goods = AD
For Equilibrium: AD = AS β C + S + T = C + I + G + X β M
In L.H.S: C + S + T = Y (total income = Y) Therefore another way of viewing Keynesian equilibrium is: Y = AD = AS (Income = Expenditure = Output)
π‘ Why this matters: Keynes' major insight was that equilibrium in the individual markets was not a necessary condition for equilibrium at the macro level. It was possible for all the individual markets or sectors to be in disequilibrium but aggregate demand and supply to be equal, and therefore the overall economy to be in equilibrium.
Aggregate demand is the total planned or desired spending in the economy during a given period. It is determined by the money supply, aggregate price level, consumption, domestic investment, government spending and taxes, and net exports (exports minus imports). Aggregate supply is the total value of goods and services that firms would willingly produce in a given time period. Aggregate supply is a function of available inputs, technology and the price level.
Disposable income (Yd) is that part of the total national income (Y) that is available to households for consumption or saving. So Yd = Y β T.
CONSUMPTION AND CONSUMPTION FUNCTION
Consumption (C) is the amount of national income that is spent on goods and services produced by domestic firms in a given period of time. Consumption is the most stable and important component of aggregate demand, accounting for about two-thirds to three-fourths of GDP in most countries.
The consumption function is a schedule relating total consumption to personal disposable income. It usually takes the form C = a + bYd = a + b(Y-T), where "a" is the minimum level of consumption that must take place even if Yd is zero, and b is the marginal propensity to consume.
When drawn in expenditure-income space, the consumption function plots as a straight line with positive intercept, and a positive (but less than 1) slope. The slope is merely the MPC. The intercept is positive because some consumption must happen even at a zero level of income (people will borrow and spend on food), and the slope is less than 1 because not all the income is consumed (part of it is saved).
| Disposable Income (Yd) | Consumption (C') | Saving (S = Yd β C') |
|---|---|---|
| 500 | 500 | 0 |
| 550 | 540 | 10 |
| 600 | 580 | 20 |
| 650 | 620 | 30 |
| 700 | 660 | 40 |
| 750 | 700 | 50 |
| 800 | 740 | 60 |
Marginal Propensity to Consume (MPC) and Marginal Propensity to Save (MPS)
Marginal propensity to consume (MPC) is the extra amount that people consume when they receive an extra dollar of disposable income. MPC's numerical value is usually between 0.5 and 1, but can vary considerably across different countries, population age groups, and stages of a person's life.
Marginal propensity to save (MPS) is the fraction of the additional dollar of disposable income that is saved. Thus, MPC = 1 β MPS.
Average propensity to consume (APC) is the ratio of total consumption to total disposable income. Average propensity to save (APS) is the ratio of total saving to total disposable income. As before, APC = 1 β APS.
π Formula:
- MPC = 1 β MPS
- APC = 1 β APS
THE SAVING FUNCTION
The saving function yields the amount of saving that households of a nation will undertake at each level of income. A usual formula is S = c + d(Yd). d is MPS, positive, and usually less than 0.5.
The relationship between saving and the interest rate is also important. The relationship is positive, is plotted in i-S space, and implies that household saving increases as the interest rate goes up β the incentive to keep one's money in the bank and earn interest thereon increases as the return on that money increases.
CALCULATION OF APC, APS & MPC, MPS
- Average propensity to consume: APC = C / Yd
- Average propensity to save: APS = S / Yd OR APS = 1 β APC
- When Yd = $500 billion: APC = 1, APS = 0
- When Yd > $500 billion: APC < 1, APS > 0
- Marginal propensity to consume: MPC = βC / βYd
- Marginal propensity to save: MPS = βS / βYd OR MPS = 1 β MPC
π Example: Using the table data:
| Yd | C | APC = C/Yd | APS = S/Yd | MPC = βC/βYd |
|---|---|---|---|---|
| 500 | 500 | 500/500=1.0 | 0 | β |
| 550 | 540 | 540/550=0.98 | 0.02 | 40/50=0.8 |
| 600 | 580 | 580/600=0.97 | 0.03 | 40/50=0.8 |
| 650 | 620 | 620/650=0.95 | 0.05 | 40/50=0.8 |
| 700 | 660 | 660/700=0.94 | 0.06 | 40/50=0.8 |
| 750 | 700 | 700/750=0.93 | 0.07 | 40/50=0.8 |
| 800 | 740 | 740/800=0.92 | 0.08 | 40/50=0.8 |
β Key Takeaways
The most critical concepts from this lecture are: (1) Macroeconomic equilibrium can be viewed through two equivalent conditions in Keynesian economics: total injections equal total leakages (S+T+M = I+G+X) and aggregate supply equals aggregate demand (Y = AD = AS). (2) The consumption function (C = a + bYd) forms the foundation of aggregate demand, with MPC (the slope) representing the fraction of additional income spent on consumption. (3) MPC and MPS always sum to 1, meaning any additional disposable income is either consumed or saved. (4) Leakages (savings, taxes, imports) remove money from the circular flow while injections (investment, government spending, exports) add money back, and equilibrium requires their equality. (5) The Classical view requires equilibrium in each individual market (S=I, G=T, X=M), while Keynes showed macro equilibrium is possible even without individual market equilibrium.
π§ Quick Revision Questions
- What are the two equivalent conditions for Keynesian macroeconomic equilibrium?
- What is the formula for the consumption function, and what do the parameters "a" and "b" represent?
- If MPC is 0.8, what is the value of MPS? If disposable income increases by $100, how much will consumption increase?
- What are the three leakages and three injections in the circular flow model?
- How does the Classical view of macroeconomic equilibrium differ from the Keynesian view?
π Lecture 31 β MACROECONOMIC EQUILIBRIUM; THE DETERMINATION OF EQUILIBRIUM INCOME (CONTINUED)
π Overview: This lecture completes the analysis of macroeconomic equilibrium by examining the components of aggregate demand, particularly investment, and their role in determining national income. It explains how equilibrium is established graphically using the 45Β° line approach and algebraically, and introduces the Keynesian multiplier concept, which quantifies how changes in spending affect overall output.
ποΈ Topics Covered
The lecture covers the investment demand curve and its determinants, the various types of investment (residential, non-residential, producer durables, inventories), imports, exports, and trade balance concepts. It then explains the determination of national income using the 45Β° line approach, the algebraic determination of equilibrium, the withdrawals-injections approach, and finally the Keynesian multiplier and its mathematical representation.
π Lecture Summary
MACROECONOMIC EQUILIBRIUM; THE DETERMINATION OF EQUILIBRIUM INCOME (CONTINUED)
INVESTMENT AND INVESTMENT DEMAND CURVE
Investment (I) or gross capital formation is any economic activity (usually undertaken by firms) that forgoes consumption today with an eye to increase output in the future. Investment is by far the most volatile component of aggregate demand.
The investment demand curve shows the relationship between the level of investment and the cost of borrowing for the firm (i.e. the interest rate), plotted in i-I space. The cost of borrowing is important because most investments are financed using borrowed resources (e.g. loans from banks). The relationship between the interest rate on such borrowing and investment demand is obviously negative, i.e. as the interest rate goes up, investment demand decreases.
TYPES OF INVESTMENT
Investment can be of various types: residential and non-residential construction, purchases of producer durables (i.e., capital equipment, machinery etc.) and buildup of business inventories. While all these different types are affected to some extent by the interest rate, there are other important determinants as well.
i. Residential construction depends upon the number of willing house-buying households, their wealth and indebtedness levels, their ability to obtain a house-building loan from financial institutions and the cost of housing units.
ii. Non-residential construction depends upon the willingness and ability of firms to buy commercial property, the vacancy rate of existing units, the needs of business units for additional commercial space, and firmsβ ability to meet increased rental costs which are directly linked to their current and expected costs and sales.
iii. The demand for producersβ durable purchases depends on utilization of existing productive capacity, the availability of advanced (more efficient) technology, current and expected sales and existing and future competition.
iv. Changes in business inventories depend on current and expected sales, current and expected inventory prices, and certainty of inventory deliveries.
IMPORTS, EXPORTS AND TRADE BALANCE
- Imports are goods and services that are produced in another country and consumed in the home country. Thus a refrigerator produced in Korea brought into Pakistan to be sold here locally would characterize as an import.
- Exports are goods and services that are produced in the home country and consumed in another country. Thus a communications satellite produced in Pakistan but sold to neighboring Iran would categorize as a Pakistani export.
- A countryβs imports are related to its level of income, exchange rate, domestic prices relative to prices in foreign countries, import tariffs (taxes and customs duties levied on imported goods), and quantitative restrictions (quotas) on imported goods. Exports are influenced by the same variables except that they are affected by foreign, not home, country income levels.
- Trade balance is the excess of exports over imports. A negative trade balance is called a trade deficit. Because the determinants of a countryβs exports and imports change with time, it is reasonable to expect a countryβs trade balance to change over time.
- Fiscal Policy is a government program with respect to i) expenditure (G): the purchase of goods and services and spending in the form of subsidies, unemployment benefits etc. and ii) tax revenue (T): the amount and type of taxes.
- T-G is referred to as the fiscal balance. If G>T, there is a fiscal or budget deficit; if G<T, there is a fiscal or budget surplus. If G=T, there is a balanced budget.
DETERMINATION OF NATIONAL INCOME
The 45Β° Line approach to equilibrium: The 45Β° line drawn in Y-X space has the feature that at any point on the line, the horizontal and the vertical distances are the same. Thus, if the units used to measure X and Y are the same (i.e. same scales), the values of the two variables at any point along the line are equal.
The 45Β° line drawn in expenditure-income (or AD-Y) space captures macroeconomic equilibrium in the economy (recall, macroeconomic equilibrium obtains when AS = AD = Y). At all points along this line, expenditure and income are equal.
Superimposing the aggregate demand (AD) line or expenditure function on the 45Β° line diagram helps get the level at which a particular economyβs equilibrium is struck; i.e. the point at which the AD line intersects the 45Β° line.
The AD or expenditure function is given by AD = C + I + G + (X-M). We saw earlier that the C function was upward sloping with positive intercept but slope between 0 and 1 (i.e. less steep than the 45Β° line). Adding I, G and X-M functions to the C function simply involves moving the C line vertically upwards (parallel shift). So C+I will be higher than C by the amount of I; C+I+G will be higher than C+I by the amount of G; and C+I+G + (X-M) will be higher or lower than C+I+G depending on whether the country is running a trade surplus or deficit, respectively.
Starting from a certain equilibrium level, any increase in G, I and (X-M) will cause a multiplied increase in income. Thus depending on the slope of the AD line, it is possible for a $10mn increase in G (shown by an upward vertical shift of the AD line) to lead to a $50mn increase in equilibrium income and expenditure.
In the above example, if the economy had started from the full-employment equilibrium, then the $10mn increase in G would lead to an inflationary gap. An inflationary gap refers to a situation where there is pressure on prices to rise. The size of the inflationary gap is $10mn, i.e. the amount by which the C+I+G+NX line must shift down to bring equilibrium income back to the full employment level. Likewise, a deflationary gap could result if, starting from the full employment level, there was a reduction in G.
ALGEBRAIC DETERMINATION OF EQUILIBRIUM
Algebraic determination of equilibrium can be done by inserting the consumption function in place of C in the equation AD = C + I + G + (X-M). In the absence of taxes, a consumption function simply collapses to C = a + bY.
In equilibrium, Y = AD. Therefore, Y* = a + bY* + G + I + (X-M). This leads to: Y* = [1/(1-b)] . [βaβ + I + G + X-M]. Here, 'a' is the autonomous part of consumption, i.e. the level of consumption that is independent of income.
Equilibrium analysis can also be done using the injections-leakages approach, i.e. by identifying the point where the upward sloping leakage function (S+M+T) intersects the horizontal injections line (I+G+X).
π Definition β Keynesian multiplier (k): The factor by which equilibrium output, income or expenditure increase in response to an increase in AD (caused by an increase in βaβ, G, I or X-M). π Formula: k = 1 / (1 - b) where 'b' is the MPC. β This means that for every $1 increase in autonomous spending, total income increases by k dollars. π Example: If b = 0.8, then k = 1 / (1 - 0.8) = 5. If βG = 10, then βY = βG Γ k = 10 Γ 5 = 50. The higher the value of b (MPC), the bigger will be the size of the multiplier. The smaller the value of b, the lower will be the size of the multiplier.
THE WITHDRAWALS - INJECTIONS APPROACH TO EQUILIBRIUM
This approach states that equilibrium is achieved when Withdrawals (W) = Injections (J). The equation is: S + T + M = I + G + X.
β Key Takeaways
The most critical concept is that macroeconomic equilibrium occurs when aggregate demand equals aggregate supply, represented by the intersection of the AD line with the 45Β° line. Investment is the most volatile AD component and is inversely related to the interest rate. The Keynesian multiplier (k = 1/(1-b)) shows that changes in autonomous spending lead to a multiplied change in national income, with the size of the multiplier depending on the marginal propensity to consume. Equilibrium can also be found through the injections-leakages approach where savings plus taxes plus imports equal investment plus government spending plus exports. An inflationary gap occurs when AD exceeds full-employment output, while a deflationary gap occurs when AD falls short of it.
π§ Quick Revision Questions
- What is the relationship between the interest rate and investment demand, and why does this relationship exist?
- Write and explain the formula for the Keynesian multiplier. What happens to the multiplier if the MPC increases?
- How is an inflationary gap different from a deflationary gap, and what causes each?
- Using the injections-leakages approach, state the condition for macroeconomic equilibrium.
- How does the 45Β° line diagram help determine equilibrium national income?
π Lecture 32 β Macroeconomic Equilibrium; The Determination of Equilibrium Income (Continued)
π Overview: This lecture continues the analysis of macroeconomic equilibrium by examining the Keynesian AD-AS approach and the 45Β° line framework. It explores the multiplier effect, Keynes's paradox of thrift, and the accelerator principle, explaining how injections and withdrawals interact to determine national income. The lecture also includes an extensive set of exercises covering national income measurement, inflation, and policy implications.
ποΈ Topics Covered
The lecture covers the Keynesian AD and AS approach to equilibrium with the 45Β° line, Keynes's intuition about the multiplier, the inflationary gap, Keynes's paradox of thrift, the accelerator concept, the interaction of accelerator and multiplier, and concludes with a comprehensive set of exercises on national income accounting, GDP measurement, injections/withdrawals, consumption functions, and macroeconomic policy.
π Lecture Summary
KEYNESIAN AD & AS APPROACH TO EQUILIBRIUM WITH THE 450 LINE APPROACH
As aggregate expenditures increase, AD also increases and output will increase. Change in expenditures is less but change in income is higher due to the multiplier effect. This is the case of the horizontal portion of AS where prices are constant. The 45Β° line represents all points where the economy is in equilibrium, i.e., expenditure on domestic goods and services equals the supply of domestic goods and services equals the incomes distributed to factors.
π Definition β 45Β° line: The line in expenditure-income space representing all points at which the economy is in equilibrium, where expenditure on domestic goods equals supply of domestic goods equals factor incomes.
π Formula: Equilibrium condition β Injections (J) = Withdrawals (W), or Aggregate Demand = Aggregate Income = Aggregate Supply
KEYNES'S INTUITION ABOUT THE MULTIPLIER
An increase in AD caused by an injection into the circular flow, e.g., higher government spending on wages, would lead to higher money wages. Higher wages translate into higher consumption expenditure, leading to higher money incomes of sellers. When firms see consumers more prosperous, they produce more, increasing demand for labour. This triggers a second rise of income increases, leading to further multiplied effects. The multiplier effect would not be infinite as there are leakages (saving, taxes, and imports) from the circular flow each time workers receive wages. The lower the leakages and the higher the marginal propensity to consume (MPC), the higher will be the multiplier.
π Definition β Leakages: Withdrawals from the circular flow of income including saving (S), taxes (T), and imports (M), which reduce the multiplier effect.
π Formula: Multiplier = 1/MPS = 1/(1-MPC) β A simple multiplier showing how much income changes per unit change in autonomous spending
π Example: If MPS = 0.25, then Multiplier = 1/0.25 = 4. An injection of Rs.2.5bn would increase national income by Rs.10bn.
INFLATIONARY GAP
An inflationary gap occurs when aggregate demand exceeds the full-employment level of output, causing upward pressure on prices. The 45Β° line diagram shows when AD is above the line at full employment, there is excess demand leading to inflation.
π Definition β Inflationary Gap: The amount by which aggregate demand exceeds the level of output at full employment, causing inflationary pressures.
KEYNES'S PARADOX OF THRIFT
The paradox of thrift highlights the negative impact of higher saving in an economy in recession. Classical economists thought the solution to low investment was high real interest rates caused by low savings. However, Keynes argued that such thrift would accentuate the recession. As people save more, they spend less. Firms produce less, hiring falls, leading to a decline in incomes in a multiplied fashion. The paradox lies in the fact that saving, while usually good for any one individual, can be harmful to the overall economy if everyone starts saving.
π Definition β Paradox of Thrift: The concept that increased saving during a recession can be harmful to the overall economy by reducing consumption, output, and income in a multiplied fashion.
π Example: Higher savings β lower consumption β firms produce less β less hiring β incomes decline (reverse multiplier effect).
THE ACCELERATOR
The accelerator formalizes the investment response to output or income changes. When an economy begins to recover from a slump, investment can rise very rapidly, and in percentage terms, the rise in investment may be several times the rise in income. Since investment is an injection into the circular flow, these changes cause multiplied changes in income, heightening booms or deepening recessions.
π Definition β Accelerator (Ξ±): The ratio of investment to the change in output, representing how much investment responds to changes in income.
π Formula: Ξ± = I/ΞY = ΞK/ΞY (where I = ΞK, I = investment, K = capital)
π Example: If Rs.2 billion worth of capital is required to produce Rs.1 billion worth of output, then Ξ± = 2 (the marginal capital-output ratio). If national income is expected to rise by 10% p.a. over 5 years, firms may invest over 50% in new capital.
π‘ Why this matters: Investment is related to changes in income, not the level of income. Therefore, income must grow at an increasing rate for investment to continue rising.
INTERACTION OF ACCELERATOR AND MULTIPLIER
The interaction of the accelerator and multiplier can set off a chain reaction. For example, a rise in government expenditure leads to a multiplied rise in national income. This rise sets off an accelerator effect: firms invest more in response to rising consumer demand. This rise in investment constitutes a further rise in injections, leading to a second multiple rise in income. The interaction cannot raise output infinitely due to: i) the full-employment constraint (fixed number of workers), and ii) output must grow at an increasing rate for investment to continue rising.
π Example: If output rises by Rs.3bn in year 1, Rs.2bn in year 2, and Rs.1bn in year 3, with Ξ± = 2, investment will be Rs.6bn, Rs.4bn, and Rs.2bn respectively. Investment falls even though output is rising, triggering a reverse multiplier-accelerator chain.
EXERCISES
Measuring National Production For a 'true' measure of national production, activities like washing-up, gardening, playing with children, cooking, and reading have both production and consumption elements. The difficulty stems from separating production from consumption. Ideally, a true measure of national welfare should be a net measure (benefits minus costs). When marketed national production is recorded, costs are ignored, so for comparative purposes, household production should be recorded on the same basis, only recording benefits.
PPP and GDP Interpretation If the Malaysian ringgit is undervalued by 47% in PPP terms against the US dollar, and the Swiss franc overvalued by 53%, GDP figures understate Malaysian purchasing value by 47% relative to US national income, and overstate Swiss purchasing value by 53% relative to US national income.
GDP Measurement Conditions If there are no sales taxes, no net factor income from abroad, and no depreciation, GDP at market prices and national income measures collapse to the same thing:
- National income = NNP at factor cost = GNP at factor cost - depreciation (depreciation = 0)
- GNP at factor cost = GDP at factor cost + net factor income from abroad (net factor income = 0)
- GDP at factor cost = GDP at market price - sales taxes (sales taxes = 0)
- Therefore NNP at factor cost = GDP at market price
Nominal vs Real GDP If nominal GDP has increased by 10% over last year but real GDP has fallen by 2%, prices must have risen by 12% (Real GDP growth = GDP growth - inflation rate, so -2% = 10% + ?, thus ? = -12%).
Population Growth and Economic Welfare Whether population growth is good or bad depends on whether the growing labour force can be usefully employed. If diminishing returns set in and human capital quality is poor, population growth may reduce per capita income. It also depends on the starting level of population.
Underground Economy and Unemployment The size of the underground economy could rise or fall with unemployment: if unemployed claim benefits and work in the underground economy, it rises with official unemployment; but if the economy is in recession, the underground economy may shrink along with the rest of the economy.
External Benefits Not in GDP Examples include: pleasure from seeing others' attractive houses and gardens, aesthetically pleasing architecture, improved health from a better diet.
Injections and Withdrawals Identification: i. Firms spend money on research β Injection (investment) ii. Government increases personal tax allowances β Decrease in withdrawals (taxes) iii. Public deposits more money in banks β Increase in withdrawals (saving) iv. Pakistani investors earn higher dividends on overseas investments β Fall in withdrawals (reduction in net outflow) v. Government purchases US military aircraft β Neither (inner flow unaffected unless financed by higher taxes) vi. People draw on savings for holidays abroad β Neither (consumption of domestic goods unchanged) vii. People draw on savings for holidays within Pakistan β Decrease in withdrawals (saving) viii. Government runs budget deficit financed by borrowing from public β Neither (increase in G offset by increase in S) ix. Government runs budget deficit financed by printing money β Net injections
Determinants of MPC: a) Rise in income tax β MPC falls (lower disposable income) b) Anticipated inflation rise β MPC rises (people spend more now) c) Redistribution from rich to poor β MPC increases (poor have higher MPC)
Deflationary Gap Example: Exports = Β£12bn, Investment = Β£2bn, Government expenditure = Β£4bn, Total consumer spending = Β£36bn, Imports = Β£12bn, Expenditure taxes = Β£2bn, MPS = 0.25, Full employment income = Β£50bn
- Injections (J) = Β£12 + Β£2 + Β£4 = Β£18bn
- Domestic consumption (Cd) = Β£36 - Β£12 - Β£2 = Β£22bn
- Expenditure on domestic goods (E) = Β£18 + Β£22 = Β£40bn
- Multiplier = 1/0.25 = 4
- a) Deflationary gap (Ye = Β£40bn vs Yf = Β£50bn)
- b) Gap = Β£2.5bn (amount needed to increase income by Β£10bn with multiplier of 4)
- c) Increase government expenditure by Β£2.5bn
Balanced Budget Multiplier: If government increases spending by Rs.10bn and finances it totally from taxes, there will still be an expansionary impact because the increase in spending is an injection of Rs.10bn, but the withdrawal (taxes) is less than Rs.10bn as saving falls (higher taxes reduce disposable income).
β Key Takeaways
The lecture establishes that macroeconomic equilibrium occurs when injections equal withdrawals or when aggregate demand equals aggregate supply, but this does not guarantee full employment. Keynes's multiplier shows how initial changes in spending produce larger changes in national income through successive rounds of consumption, limited by leakages like saving, taxes, and imports. The paradox of thrift demonstrates that while saving is individually beneficial, increased saving during a recession can worsen economic conditions through a reverse multiplier effect. The accelerator links investment to changes in output rather than the level of output, explaining why investment can fluctuate dramatically during business cycles. The interaction of multiplier and accelerator effects can amplify economic fluctuations, but is constrained by full employment and the need for output to grow at increasing rates for investment to rise continuously.
π§ Quick Revision Questions
- What are the two equivalent conditions for macroeconomic equilibrium in the Keynesian framework?
- Why does the paradox of thrift suggest that increased saving during a recession can be harmful to the economy?
- What is the accelerator principle, and why is investment related to changes in income rather than the level of income?
- If nominal GDP increases by 10% and real GDP falls by 2%, what is the rate of inflation?
- Why can a balanced budget increase in government spending (financed entirely by taxes) still have an expansionary effect on output?