📘 Lecture 37 — The Four Big Macroeconomic Issues and Their Inter-Relationships (Continued)
📖 Overview: This lecture continues the examination of major macroeconomic issues by focusing on the determinants of the capital account, the real exchange rate as a measure of competitiveness, and the interest parity condition. It also explores the causes and consequences of current account deficits, providing a framework for understanding a country's balance of payments position and policy options for adjustment.
🗂️ Topics Covered
The lecture covers the determinants of capital account inflows, including macroeconomic environment and interest rate differentials. It defines the real exchange rate and explains how changes in domestic and foreign prices affect competitiveness. The interest parity condition is introduced as an arbitrage condition linking interest rates and exchange rates. The lecture concludes with an analysis of current account deficits, their sources (private sector vs. government budget deficits), and the role of devaluation in reducing them.
📝 Lecture Summary
DETERMINANTS OF CAPITAL ACCOUNT
The focus shifts from the current account to the capital account and the factors that attract capital inflows. Three key determinants are identified: a. The attractiveness of the macroeconomic environment, including law and order, is a major determinant of foreign direct investment (FDI) inflows. A better environment encourages more inflows via direct investment by foreign firms. b. The favorability of international borrowing conditions (foreign lenders' attitudes, perception of the borrowing country, and foreign interest rates) determines how easily a country can raise foreign debt. c. If foreign interest rates are lower than domestic interest rates (adjusted for expected exchange rate depreciation), foreign portfolio investors will want to invest in the domestic country's stocks, bonds, and other interest-bearing assets.
🔑 Definition — Interest Parity: The condition that domestic interest rates (i_d) minus expected depreciation (ΔE^e) should approximately equal foreign interest rates (i_f) if private portfolio flows are to balance. The formula is: i_d - ΔE^e ≈ i_f.
💡 Why this matters: The costs of running a high BOPs or current account deficit (over 5% of GNP) for a long time can be severe. Under a fixed exchange rate, the country risks losing precious foreign exchange reserves, leading to monetary contraction and AD contraction with social costs. If reserves run out completely, a BOPs crisis can occur, damaging the country's international image and ability to borrow or attract investment.
COMPETITIVENESS OF A PAKISTANI GOOD RELATIVE TO A US GOOD: REAL EXCHANGE RATE
The nominal exchange rate (NER) is the price in domestic currency of one unit of a foreign currency. The real exchange rate (RER) is defined as: C = RER = (PF × NER) / PD Where NER is Rs/$.
Key effects on competitiveness:
- PF goes up → For a given exchange rate, Pakistani goods become relatively cheaper, increasing competitiveness.
- NER depreciates → For given PD and PF, Pakistani goods become cheaper for foreign buyers.
- An increase in PD (domestic prices) reduces the RER, decreasing competitiveness.
- If PF/PD falls, the RER falls, competitiveness falls, and the current account deficit deteriorates, requiring the NER to rise to restore competitiveness.
The RER is a theoretical ideal based on purchasing power parity (PPP), which implies a constant RER. Empirical determination of a constant RER is limited by data collection constraints. PPP holds only in the long term (3–5 years) when prices correct towards parity. Government-enacted tariffs can also affect the actual exchange rate, helping to reduce price pressures.
📌 Example: Comparison of investment of $60 at home (Pakistan) and in the United States:
- In Pakistan (10% interest rate): Rs.60 → Gets Rs.66 at end of one year → No conversion required.
- In USA (3% interest rate): Rs.60 → Convert at Rs.60/$ → Gets $1.03 at end of one year → Convert at Rs.60/$ = Rs.61.8. But if conversion is at Rs.66/$ = Rs.67.8.
- If the rupee depreciates from Rs.60/$ to Rs.66/$, investment in the USA becomes a better option (Rs.67.8 > Rs.66).
INTEREST PARITY CONDITION
This condition holds if there are no incentives to move capital from one country to another. Interest rate parity is a basic identity that relates interest rates and exchange rates. It is an arbitrage condition stating that returns from borrowing in one currency, exchanging for another, investing in interest-bearing instruments, and simultaneously purchasing futures contracts to convert back should equal returns from holding similar instruments of the first currency. If returns differ, investors could theoretically arbitrage and make risk-free returns.
📐 Formula: i_D ≈ i_F + ΔE^e Where:
- i_D = Domestic interest rate
- i_F = Foreign interest rate
- ΔE^e = Expected depreciation
📌 Example: If i_D = 13%, i_F = 3%, and ΔE^e = 10%, then i_D = i_F + ΔE^e (13% = 3% + 10%).
- If i_D > i_F + ΔE^e → Invest in Pakistan.
- If i_D < i_F + ΔE^e → Invest in USA.
CURRENT ACCOUNT DEFICIT
The current account is crucial for maintaining long-term sustainability of the balance of payments. The equilibrium condition of the economy is where withdrawals equal injections: W = J. 📐 Formula: S + T + M = I + G + X Rearranged: M – X = I – S + G – T Thus: Current account deficit = Private sector resource deficit + Government budget deficit
📌 Example: Japan and Korea experienced high current account deficits due to high private sector resource deficits. Firms wanted to invest more, and debts to finance the current account deficit were used for investment. In contrast, African and Latin American economies also had high current account deficits, but these were due to higher consumption expenditures by households and consumers, which worsened their debt problems.
HOW TO REDUCE CURRENT ACCOUNT DEFICIT?
Devaluation (or depreciation) can help reduce the current account deficit by increasing exports and decreasing imports. However, this policy has not been empirically successful in many countries due to various reasons (e.g., price inelasticity of demand for imports/exports, J-curve effects, or structural issues in the economy).
⭐ Key Takeaways
The capital account is determined by macroeconomic environment, international borrowing conditions, and interest rate differentials through the interest parity condition. The real exchange rate is a vital measure of a country's competitiveness, expressed as RER = (PF × NER) / PD, and is linked to purchasing power parity. The interest parity condition (i_D ≈ i_F + ΔE^e) ensures no arbitrage opportunities between domestic and foreign investments. Current account deficits arise from either private sector resource deficits (investment-driven) or government budget deficits, with different implications for debt sustainability. Devaluation is a theoretical tool to reduce current account deficits, but its empirical success is limited.
🧠 Quick Revision Questions
- What are the three key determinants of capital account inflows discussed in the lecture?
- Write the formula for the real exchange rate and explain what happens to competitiveness if domestic prices (PD) increase.
- According to the interest parity condition, if the domestic interest rate is 15%, the foreign interest rate is 5%, and expected depreciation is 8%, should an investor invest at home or abroad? Why?
- Using the equilibrium condition S + T + M = I + G + X, show how the current account deficit equals the sum of the private sector resource deficit and the government budget deficit.
- Why has devaluation not been empirically successful in reducing current account deficits in many countries?
📘 Lecture 38 — The Four Big Macroeconomic Issues and Their Inter-Relationships (Continued)
📖 Overview: This lecture continues the exploration of major macroeconomic issues, focusing on economic growth as a key objective. It defines growth, differentiates between actual and potential GDP, explains the difference between real and nominal GDP, and emphasizes the importance of per capita growth. The lecture also establishes the fundamental link between growth and the factors of production, providing a framework for understanding how economies expand.
🗂️ Topics Covered
The lecture begins with the concept of economic growth and growth rate, then distinguishes between actual and potential GDP, explaining the output gap. It covers traditional thinking about growth driven by factor resources or efficiency, followed by a comparison of real vs. nominal GDP using the Fisher Equation. The importance of aggregate GDP vs. per capita real GDP is discussed, along with a mathematical derivation of their relationship. The lecture concludes by exploring the link between growth and various factors of production including capital, labor, land, raw materials, and technical knowledge.
📝 Lecture Summary
THE CONCEPT OF ECONOMIC GROWTH AND GROWTH RATE
Economic growth is defined as an increase in an economy's level of production, output, or income. Output can be understood in two broad contexts: comparing real GDP with welfare measures (adjusting for externalities, social indicators, black market, purchasing power parity, income inequality) or comparing potential output versus actual output. Potential output is the aggregate capacity output—the maximum quantity of goods and services that can be produced with available resources and a given state of technology. For this discussion, output simply means real GDP. The growth rate of a country's real GDP can be negative, positive, or zero. A growth rate of 2-3% is considered normal for mature developed countries; for low-income countries (LICs), 5-7% is healthy and 7%+ is excellent.
ACTUAL & POTENTIAL GDP
The GDP gap or output gap is the difference between actual GDP and potential GDP (potential output). The calculation is Y - Y*, where Y is actual output and Y* is potential output or the natural level of output. A positive result is an expansionary gap, indicating an economy in expansion; a negative result is a recessionary gap, indicating an economy in recession. The percentage GDP gap is calculated as: (Actual GDP − Potential GDP) / Potential GDP.
🔑 Definition — Potential Output: The aggregate capacity output of a nation; the maximum quantity of goods and services that can be produced with available resources and a given state of technology. 📐 Formula: Output Gap = Actual GDP (Y) - Potential GDP (Y*)
TRADITIONAL THINKING ABOUT GROWTH
Traditional thinking held that growth can be driven either by an increase in factor resources (land, natural resources, labour, capital), i.e., an increase in potential GDP, or by more efficient use of factors, i.e., a move from inside the PPF to the PPF. The policy implication was simple: countries must either accumulate factors of production (especially capital) or develop more cost-efficient technologies and methods of production. Factors of production were at the heart of growth theory. The trade cycle includes phases: 1 - the upturn, 2 - the boom, 3 - the peaking out, 4 - the slowdown, recession or slump.
REAL VS NOMINAL GDP
Nominal GDP measures the value of output during a given year using the prices prevailing during that year. Over time, the general level of prices rises due to inflation, increasing nominal GDP even if the volume of goods and services produced is unchanged. Real GDP measures the value of output in two or more different years by valuing goods and services adjusted for inflation. For example, if both nominal GDP and price level doubled between 1995 and 2005, real GDP would remain the same. Real GDP is usually used for year-over-year GDP growth as it gives a more accurate view of the economy.
The relationship between nominal GDP, real GDP, and inflation is explained by the Fisher Equation: Real GDP = Nominal GDP – Inflation.
📐 Formula: Real GDP = Nominal GDP – Inflation
AGGREGATE GDP VS PER CAPITA REAL GDP
An economy's total income or the sum total of all incomes in a given period is the aggregate GDP or aggregate income level. When studying growth, it is instructive to analyze changes in per capita real GDP along with changes in real GDP. Per capita real GDP growth adjusts GDP growth downwards by the population growth rate and gives a more accurate indication of improvements in living standards. For mature HICs, real GDP growth rate equals per capita real GDP growth rate since population size is stable. Even a small per capita real GDP growth rate (e.g., 2% p.a.), if sustained for a very long time (e.g., 100 years), can deliver huge improvements in living standards, as seen in the U.S., Japan, and East Asian tiger economies.
Why growth is an important macroeconomic issue: Every government aspires to deliver higher growth. High growth means higher national income, better living standards, happier electorates, and increased chances of re-election. However, only a handful of countries have been able to achieve high growth rates in practice.
HOW PER CAPITA GROWTH RATES RELATED TO THE AGGREGATE GROWTH RATE IN AN ECONOMY? DEFINING GDP GROWTH RATE
The relationship is defined as: y = Y / L Where: Y = Total GDP L = Population y = Per capita GDP
Taking log of both sides: ln y = ln Y – ln L Taking derivative w.r.t. time: (1/y)(dy/dt) = (1/Y)(dY/dt) – (1/L)(dL/dt) This simplifies to: gy = gY – gL Growth rate of per capita income = Growth rate of total output - Growth rate of population
📐 Formula: gy = gY – gL (Growth rate of per capita income = Growth rate of total output - Growth rate of population)
📌 Example (Pakistan's growth rate statistics since independence):
| Era | Aggregate Real GDP | Per Capita RGDP | Population |
|---|---|---|---|
| 60s | 6.7 | 4.0 | 2.7 |
| 70s | 4.8 | 1.7 | 3.1 |
| 80s | 6.4 | 3.3 | 3.1 |
| 90s | 4.7 | 2.0 | 2.7 |
| Reference: Zaidi. A, Issues in Pakistan's Economy |
LINK BETWEEN GROWTH AND THE VARIOUS FACTORS OF PRODUCTION
Capital: Any increase in capital should cause an increase in growth rate of output. Capital deepening describes an economy where capital per worker is increasing (increase in capital intensity), often measured by capital stock per labour hour. The economy expands and productivity per worker increases, but economic expansion will not continue indefinitely through capital deepening alone due to diminishing returns and wear & tear. Capital widening describes the situation where capital stock is increasing at the same rate as the labour force, so capital per worker remains constant. The economy expands in aggregate output, but productivity per worker remains constant.
💡 Why this matters: Understanding the difference between capital deepening and capital widening explains why simply adding more capital does not guarantee sustained productivity growth—diminishing returns eventually set in.
Labor: Human capital also matters for economic growth. Both the quantity and quality of labour should be considered as an engine of growth.
Land: Pakistan is an agrarian country where land matters much. Japan and Korea grew rapidly because they used their scarce land very efficiently.
Raw materials: If the stock of raw materials increases, the economy will produce more output, increasing the growth rate of output.
Technical knowledge: If there are technical advancements, production and the growth rate of output will increase. The factors of technological advancements are learning by doing, invention, innovation, etc.
⭐ Key Takeaways
The most critical concepts for exam preparation are: first, economic growth is measured by increases in real GDP, and the growth rate can be negative, positive, or zero with different benchmarks for developed (2-3%) versus developing countries (5-7%+). Second, the output gap (Y - Y*) distinguishes between expansionary and recessionary conditions in the economy. Third, per capita real GDP growth equals aggregate growth minus population growth (gy = gY - gL), and this measure is more indicative of actual living standard improvements. Fourth, nominal GDP vs real GDP is distinguished using the Fisher Equation, where real GDP accounts for inflation. Finally, growth is linked to factors of production—capital deepening (increasing capital per worker) raises productivity temporarily, while capital widening (maintaining capital per worker) keeps productivity constant, and technological advancement is the key to sustained long-run growth.
🧠 Quick Revision Questions
- What is the difference between potential output and actual output, and how is the output gap calculated?
- Explain the Fisher Equation and how it relates real GDP, nominal GDP, and inflation. If nominal GDP grows by 5% and inflation is 3%, what is the real GDP growth?
- Why is per capita real GDP a better measure of living standards than aggregate GDP? What is the formula connecting per capita growth, aggregate growth, and population growth?
- Distinguish between capital deepening and capital widening. Which one leads to increased productivity per worker, and why can't it continue indefinitely?
- According to traditional thinking about growth, what are the two main ways to drive economic growth, and what policy implications follow from this?
📘 Lecture 39 — The Four Big Macroeconomic Issues and Their Inter-Relationships (Continued)
📖 Overview: This lecture explores the two major theories of long-run economic growth: exogenous growth theory (also known as the Neo-classical or Solow growth model) and endogenous growth theory. It explains their mathematical formulations, key assumptions, policy implications, and criticisms, highlighting why these models matter for understanding how economies grow and whether governments can influence growth rates.
🗂️ Topics Covered
The lecture covers the Exogenous Growth Theory (Neo-classical/Solow model), including its mathematical form using the Cobb-Douglas production function, derivation of steady-state conditions, and inferences such as the convergence theory. It then discusses criticisms of exogenous growth theory, followed by Endogenous Growth Theory, its mathematical form (the AK model), and the roles of labour, capital, land, and technical progress as engines of growth.
📝 Lecture Summary
EXOGENOUS GROWTH THEORY
The Exogenous growth model, also known as the Neo-classical growth model or Solow growth model, summarizes contributions by various authors to a model of long-run economic growth within neoclassical economics. Robert Solow, who received the 1987 Nobel Prize, made the most important contribution. The key assumption is that capital is subject to diminishing returns. Given a fixed stock of labor, the impact on output of the last unit of capital accumulated will always be less than the one before. Assuming no technological progress or labor force growth, diminishing returns implies that at some point, the amount of new capital produced is only just enough to make up for existing capital lost due to depreciation. At this point, the economy ceases to grow.
🔑 Definition — Exogenous Growth Model: A model where long-run economic growth is determined by factors outside the model (exogenous), specifically population growth and technological progress.
🔑 Definition — Diminishing Returns: The principle that each additional unit of capital added to a fixed labor force produces smaller and smaller increases in output.
💡 Why this matters: This theory suggests that governments cannot influence long-term growth rates through policy, as growth is determined by external factors.
MATHEMATICAL FORM OF THE MODEL
The Cobb-Douglas production function with constant returns to scale is used:
Y = A K^α L^(1-α) (0 < α < 1)
Where:
- Y = Aggregate real output
- A = Level of technical knowledge (fixed)
- K = Stock of capital
- L = Size of the labor force
- α = Parameter between 0 and 1
Diminishing returns verification:
Differentiating Y with respect to K:
- dY/dK = A α K^(α-1) L^(1-α)
- RHS decreases as K increases because (α – 1) < 0
Differentiating Y with respect to L:
- dY/dL = AK^α (1 – α)L^(-α)
- RHS decreases as L increases because (–α) < 0
Per capita production function:
Dividing both sides by L:
- Y/L = A K^α L^(1-α) / L
- Let L = L^α × L^(1-α)
- Therefore: y = A k^α
Where:
- y = Per capita output (Y/L)
- k = Capital per person (K/L)
Capital accumulation dynamics:
- Total capital accumulation = sY = sAk^α
- Capital widening = nk (maintaining the K/L ratio)
- Let k▪ = dk/dt (change in capital per person over time)
Steady State condition:
- k▪ = sAk^α – nk
- As k increases, k▪ falls
- k▪ = 0 when sAk^α = nk
🔑 Definition — Steady State Level of Capital: The point where capital per person remains constant because new capital accumulation exactly equals capital widening needs.
📐 Formula — Steady State Capital: k▪ = [sA/n]^(1/(1-α))
When k▪ = 0, it means d(K/L)/dt = 0, i.e., K and L are growing at the same rate: gK = n
Growth rate of output (Y):
Taking logs and differentiating Y = A K^α L^(1-α):
- ln Y = ln A + α ln K + (1-α) ln L
- gY = dY/dt/Y = 0 + αgK + (1-α)gL
- gY = αn + (1-α)n = αn + n – αn = n
📌 Example: If population grows at 2% per year (n = 0.02), then output also grows at 2% per year in the steady state. The growth rate of output is determined by the growth rate of population, which is exogenously given, and the government cannot do anything about it.
INFERENCES FROM THIS THEORY
The following inferences can be drawn:
- Saving has no effect on the steady state growth rate
- Determinants of growth are beyond the control of policy makers
- Convergence theory: Countries with higher levels of 'k' would converge to the output level of countries with lower levels of 'k'
Based on diminishing returns to capital, the main theses are:
- The steady-state growth rate of real GDP depends on n and t (exogenous rates of population growth and technology). Higher savings only have a level effect on income, not a long-term growth effect, because savings-enabled investment eventually runs into diminishing returns.
- Convergence: If one country starts with lower income and capital than another, the poorer country would grow faster to catch up. Eventually, both grow at the same rate.
🔑 Definition — Convergence Theory: The theory that poorer countries (with lower capital per person) will grow faster than richer countries, eventually catching up, because of diminishing returns to capital.
The convergence theory graph shows that:
- To the right of steady state k₂, k▪ is negative, so k decreases toward k₂
- To the left of k₂, k▪ is positive, so k increases toward k₂
CRITICISM / MAJOR WEAKNESSES OF EXOGENOUS GROWTH MODEL
Empirical evidence offers mixed support for the model. Limitations include its failure to account for entrepreneurship (which may catalyze growth) and the strength of institutions (which facilitate growth). It also does not explain how or why technological progress occurs.
Three major weaknesses:
- Could not explain widening gap between poor and rich countries (anti-catch up)
- Could not explain East Asian growth on the back of higher saving rates
- Modeled technology as exogenous and beyond policy influence
Responses to weaknesses:
- Weakness 1: Answerable within neo-classical framework — convergence only occurs among countries with similar starting capital and income levels; countries with very low capital might never grow out of poverty
- Weakness 2: Addressed by endogenous growth theory, where the steady state growth rate depends directly on the saving rate and technology level
- Weakness 3: Addressed by endogenous growth theory, linking technological progress to conscious R&D effort by firms and government
ENDOGENOUS GROWTH THEORY
In economics, endogenous growth theory (or new growth theory) was developed in the 1980s as a response to criticism of the neo-classical growth model. In neoclassical models, long-run growth is exogenously determined by assuming a savings rate (Solow model) or rate of technical progress. Endogenous growth theorists see this as an over-simplification.
Endogenous growth theory overcomes this by building macroeconomic models from microeconomic foundations: households maximize utility subject to budget constraints while firms maximize profits. Crucial importance is given to the production of new technologies and human capital. The engine for growth can be a constant return to scale production function (the AK model) or more complicated setups with spillover effects.
🔑 Definition — Endogenous Growth Theory: A theory where the long-run growth rate is determined inside the model (endogenous), depending on saving rates, technology levels, and policy measures.
💡 Why this matters: Policy measures can impact long-run growth rates. Subsidies on R&D or education can increase growth by increasing the incentive to innovate.
MATHEMATICAL FORM OF THE MODEL (AK Model)
y = Ak
There is no α because of non-diminishing returns to factors.
Dynamics:
- Total capital accumulation: sy = sAk
- Capital widening: nk
- Capital deepening (k▪): sAk – nk = (sA – n)k
- Growth rate of capital per person: (k▪/k) = sA – n
Since y = Ak, taking logs: ln y = ln A + ln k Therefore: y▪/y = k▪/k
Growth rates:
- gy = y▪/y = sA – n
- gY = gy + gL
- gY = sA – n + n
- gY = sA
📐 Formula — Growth Rate in Endogenous Model: gY = sA
Thus the growth rate of output depends on the saving rate (s) and technological progress (A).
Labour and Capital: For a given L and no depreciation, an increase in K increases k and y — this is capital deepening induced growth. However, with depreciation (at rate d% p.a.) and labor growing at n% p.a., capital must grow by at least (d+n)% p.a. to keep K/L constant — this is capital widening. The per capita output impact of capital widening is zero because k remains the same.
With labour as the engine of growth: an increase in labour hours expands output, but historically the working week shortened. Growth came from more people in the labour force (e.g., women working) and improved human capital quality — better education and skills. Japan and Germany are prime examples of achieving high growth despite low physical capital after WWII due to high quality human capital.
🔑 Definition — Capital Deepening: An increase in capital per worker that raises output per worker.
🔑 Definition — Capital Widening: Spreading available capital over a growing labor force to maintain the same capital-labor ratio, with zero per capita output impact.
Land: Malthus (1798) noted that land supply is fixed while population rises, implying diminishing returns to labor and world hunger. This didn't happen globally due to technological breakthroughs in agricultural production (tractors, fertilizers) that increased yields per acre by hundreds of percent. Today, land doesn't feature centrally in growth theory, as countries like Japan, Singapore, and Hong Kong achieved high growth while geographically larger countries lagged behind.
Natural Resources: Some resources are not renewable (oil, coal, gas, minerals) while others are (timber, fish). These concerns are important when considering natural resources as engines of growth.
Technical Progress: Technical progress neither depletes nor requires renewing. Technical knowledge is additive and cumulative, depending on invention, innovation, and learning by doing. Governments protect incentives to invent through patent and copyright laws, granting monopoly production rights. They also fund research and development (R&D) activities.
🔑 Definition — Technical Progress: The accumulation of technical knowledge through invention, innovation, and learning by doing, which is additive, cumulative, and can continually drive growth.
⭐ Key Takeaways
The most critical concepts from this lecture are: (1) Exogenous growth theory (Solow model) assumes diminishing returns to capital, resulting in a steady-state growth rate determined entirely by exogenous population growth, meaning government policy cannot affect long-term growth. (2) Endogenous growth theory (AK model) assumes non-diminishing returns, making growth dependent on the saving rate and technology level, which policy can influence through R&D subsidies, education spending, and patent protection. (3) The convergence theory predicts poorer countries grow faster to catch up, but this only holds for countries with similar starting conditions. (4) Capital deepening increases per capita output, while capital widening merely maintains the capital-labor ratio. (5) Technical progress is the most powerful engine of growth because it is additive and cumulative, unlike land and natural resources which are finite.
🧠 Quick Revision Questions
-
What is the key difference between exogenous and endogenous growth theories regarding the role of saving rates in determining long-run growth?
-
In the Solow growth model, if the population growth rate (n) is 3% and technology is constant, what is the steady-state growth rate of aggregate output (Y)? Explain why.
-
Why did the convergence theory fail to explain the widening gap between rich and poor countries, and how was this addressed?
-
In the AK model of endogenous growth, how does an increase in the saving rate affect the growth rate of output? Show using the formula gY = sA.
-
What is the difference between capital deepening and capital widening, and what is the per capita output impact of each?
📘 Lecture 40 — The Four Big Macroeconomic Issues and Their Inter-Relationships: Bilateral Relationship among the “Big Four” & Fiscal Policy
📖 Overview: This lecture explores the inter-relationships between the four major macroeconomic objectives—growth, unemployment, inflation, and balance of payments—in both the short run and long run. It then introduces the Salter-Swan diagram for analyzing internal and external balance, followed by a comprehensive discussion of fiscal policy, taxation, and the money creation process.
🗂️ Topics Covered
The lecture begins by examining the bilateral relationships among the four macroeconomic issues during the trade cycle and in the long run, including inflation-unemployment, growth-inflation, growth-unemployment, growth-BOPs, BOPs-unemployment, and BOPs-inflation. It then covers the Salter-Swan diagram for internal and external balance, the concept and types of fiscal policy including budget deficits and surpluses, the theory and debate over taxation covering equity and efficiency, the Laffer curve, the balanced budget multiplier, the money supply process and commercial banking, and finally the central bank’s balance sheet.
📝 Lecture Summary
The Four Big Macroeconomic Issues and Their Inter-Relationships: Bilateral Relationship among the “Big Four” & Fiscal Policy
BIG FOUR IN CASE OF SHORT RUN
In the short term (up to about two years), the four objectives of faster growth, lower unemployment, lower inflation, and avoidance of balance of payments deficits are all related because they depend on aggregate demand (AD) and vary with the trade (or business) cycle. During the expansionary phase following a recession, AD grows rapidly, narrowing the gap between actual and potential output, which reduces demand-deficient unemployment. However, rising demand puts pressure on prices (inflation) and sucks in imports, moving the balance of payments toward a deficit. The opposite happens during the contractionary phase following a boom.
BIG FOUR IN CASE OF LONG RUN
In the long run, inter-relationships between the four variables become more complex. a. Inflation-unemployment: This relationship has been covered under the Phillips curve discussion. Whether a trade-off exists depends on whether one subscribes to monetarist or Keynesian theory. b. Growth-inflation: Economic growth puts pressure on prices if there is no slack in the economy and production requires overtime or 24-hour machine use. This depends on whether growth is demand-led (shifting AD rightward given an upward-sloping supply curve) or supply-led (shifting AS rightward given a downward-sloping demand curve, causing prices to fall). The reverse relationship—inflation affecting growth—is almost always negative. An exogenous rise in prices (like the 1970s oil price shocks) shifts the AS curve leftward, reducing equilibrium output. High inflation also deters investment through the uncertainty effect, reducing both productive capacity (AS shifts left) and the investment component of AD (AD shifts left). c. Growth-unemployment: High economic growth usually means low unemployment, but this is not necessarily true. If growth reflects a switch from labour-intensive production to capital-intensive production, unemployment can actually rise as labour is substituted by capital. Conversely, moderate or zero growth with a switch toward labour-intensive production can cause unemployment to fall. Labour is a resource, and high unemployment implies the economy is producing below its potential, making high growth unlikely. d. Growth-BOPs: This depends on whether growth is import-substituting industrialization (ISI) or export-oriented. With ISI (e.g., India 1947-1980s), the country imports capital and machinery to set up industries for the home market, resulting in growth but a high current account deficit initially. With export-led growth (e.g., East Asian countries), the country captures a larger share of world markets through exports, generating current account surpluses. e. BOPs-unemployment: A BOPs deficit can reduce domestic activity, growth, and employment if it reflects consumers switching from local goods to imports. The reverse relationship: high unemployment means low incomes, low spending, and lower imports, which improves the BOPs. f. BOPs-inflation: Under a fixed exchange rate, a BOPs deficit reduces domestic money supply, which should reduce prices. With floating exchange rates, a BOPs deficit causes local currency depreciation, making imports more expensive and increasing inflation.
THE SALTER-SWAN DIAGRAM
The Salter-Swan diagram analyzes relationships between macroeconomic problems and derives appropriate policy prescriptions. It uses (real) exchange rate–absorption space, where absorption means aggregate demand-injection variables (like government spending, money supply). 🔑 Definition — Internal Balance (IB): The combination of points where aggregate demand equals aggregate supply in the economy. The IB line slopes downward because the more appreciated the exchange rate, the lower the imports and AD, requiring higher demand-injection to bring AD back up to AS. Points to the right of IB indicate inflation; points to the left indicate unemployment. 🔑 Definition — External Balance (EB): The combination of points where exports equal imports. The EB line slopes upward because as absorption increases, AD and imports increase, requiring a more depreciated exchange rate to bring the current account back to balance. Points to the right of EB indicate a current account deficit; points to the left indicate a current account surplus. 📌 Example: The intersection of IB and EB delivers joint internal and external equilibrium. The economy can be in any of four quadrants: north (inflation, CA+), west (unemployment, CA+), east (inflation, CA-), south (unemployment, CA-). LICs often find themselves in the east quadrant with both inflation and unemployment, where a combination of devaluation and lower absorption (tight monetary and fiscal policies) can help.
FISCAL POLICY
Fiscal policy is the government’s program with respect to the amount and composition of expenditure, revenues, and public debt. It uses the federal government's powers of spending and taxation to stabilize the business cycle. 🔑 Definition — Expansionary policy: Increasing spending or reducing taxes during a recession. 🔑 Definition — Contractionary policy: The opposite actions during periods of high inflation. Government purchases: Expenditures on final goods and services by the government sector, used to operate the government and provide public goods (national defense, highways). These do not include transfer payments. Taxes: Forced or coerced payments to government, used to finance public goods and pay administrative expenses. Taxes also redirect resources and alter total production in the economy. Budget Deficit, Budget Surplus and Balanced Budget: If expenditure exceeds revenues, the government runs a fiscal or budget deficit and must borrow. If revenues exceed expenditure, there is a fiscal or budget surplus and the government can reduce its debt. If they are equal, there is a balanced budget. Fiscal deficits and debt are often reported as a ratio of GDP. The Maastricht criteria (for EU countries) stipulates that fiscal deficit to GDP should be less than 3% while public debt to GDP should be less than 60%.
THE CONCEPT OF TAXATION
Taxes are general purpose, compulsory contributions to the public treasury to meet government expenditure needs. Since taxes interfere with the market mechanism, they are considered distortionary. There is a long-standing debate over taxation between the market-friendly right (who believe in reducing government size and lowering taxes) and the interventionist left (who consider a big and active government essential for better public services). 💡 Why this matters: The stance over taxation defines the economic “right” and “left” in HICs.
THE DEBATE OVER TAXATION
The Concept of Equity: Equity emphasizes fairness or just sacrifice—everyone should pay tax according to their ability. Progressive taxation, where the tax rate increases as income increases, is an application of the vertical equity principle (Robinhood approach). 🔑 Definition — Horizontal equity: Identically well-off people should be taxed identically, without discrimination due to race, gender, caste, or religion. The Concept of Efficiency: This concerns the distortionary effects of taxation on private sector behavior and incentives. A Pareto-efficient allocation is a situation where it is impossible to make some people better off without making anybody worse off. In a free-market perfectly competitive economy where P=MC, the market automatically delivers Pareto-efficiency, so any tax that interferes generates efficiency losses. 📌 Example: The efficiency loss of a tax can be illustrated by a demand-supply diagram where the loss in consumer and producer surplus is greater than the revenue gain to government. However, a tax can be justified on efficiency grounds when there are market failures (to bring marginal social cost equal to marginal social benefit) or when there are existing distortions (spreading the distortion over many commodities rather than placing the burden on just one).
TYPES OF TAXES
Direct tax: A tax on income, including wages, rent, interest, profit, and transfer payments. Personal income tax: A tax on individual income, which is progressive in principle but more proportional today. Corporate income tax: A tax on the accounting profits of corporations, often criticized because dividends are taxed twice. Indirect tax: Sales tax: A tax on retail sales, which is a major source of revenue for state and local governments. It tends to be regressive because poorer people spend a larger share of their income on taxed items. Excise tax: A tax on a specific good (alcohol, tobacco, gasoline), used to discourage consumption or raise easy revenue. Value-added tax: A tax on the extra value added during each stage in the production of a good. Regressive tax: A tax where people with more income pay a smaller percentage in taxes (e.g., you earn $10,000 and pay $2,000 (20%), your boss earns $20,000 and pays $2,000 (10%)). Proportional tax: A tax where people pay the same percentage of income regardless of income. Progressive tax: A tax where people with more income pay a larger percentage in taxes. For LICs, income tax collection is very low and indirect taxes account for more than 2/3rd of total revenue. For HICs, income taxes account for over 2/3rd of total tax revenue. 📐 Formula: Disposable income Yd = Y - T = Y - tY, where t is the net income tax rate.
HOW MUCH TO TAX? LAFFER CURVE
The Laffer curve is the graphical inverted-U relation between tax rates and total tax collections. Developed by economist Arthur Laffer, it formed a key theoretical foundation for supply-side economics. Government collects zero revenue if the tax rate is 0% and if the tax rate is 100% (since no one has the incentive to work). The optimum tax rate lies somewhere between 0% and 100%. If the economy is operating to the right of the peak, government revenue can be increased by decreasing the tax rate.
EXPENDITURES AND THE EFFECTS OF FISCAL POLICY
Expenditures may be categorized as recurrent (interest payments on debt, salaries, administrative expenses) and development (social sector capital expenditures expected to yield long-term benefits like building schools, hospitals, motorways). Revenues minus (recurrent + development expenditures + interest payments on debt) gives the primary surplus, the amount available to service the burden of public debt.
EFFECT OF TAXATION ON EQUILIBRIUM OUTPUT AND THE BALANCED BUDGET MULTIPLIER
The multiplier formula changes when taxes are included: k = 1 / (1 - MPC) C = a + bYd Yd = Y - tY = Y(1 - t) C = a + {b (1 - t)} Y MPC* = b (1 - t) k* = 1 / (1 - MPC*) = 1 / [1 - MPC (1 - t)] 📌 Example: If MPC = 0.8 and t = 0.2, then MPC* = 0.8 (1 - 0.2) = 0.64, so k* = 1 / (1 - 0.64) = 2.77. Taxes act as a drag on the multiplier effect of government spending because they represent a leakage from the circular flow. The balanced budget multiplier concept shows that if the government spends Rs.10 bn and finances it by increasing taxes by Rs.10 bn, the multiplier will not be zero because the higher tax causes disposable income to fall, which causes saving and imports to fall, creating a positive multiplier effect.
FISCAL POLICY, MONEY & BANKING
Financing of Deficit: The government can borrow from three sources: i. Borrow from domestic banking system or general public through sale of treasury bills (short-term, <1 year) and bonds (long-term, >2 years). This can lead to crowding out of private sector activity by raising interest rates. ii. Borrow from the central bank by printing money, which is highly inflationary. iii. Borrow from foreign sources through bonds on international capital markets or loans. This does not lead to crowding out and is not immediately inflationary.
SHOULD THE FISCAL POLICY BE ACTIVE OR PASSIVE? In a Keynesian context, even a passive fiscal stance produces an automatic stabilizer effect. If AD falls, Y falls, tax collection falls, which is equivalent to passive fiscal expansion. Also, unemployment rises, increasing eligibility for unemployment benefits, causing government expenditure to rise. Arguments against active fiscal policy include time lags (annual budgets), effects on interest rates and exchange rates, and the burden of national debt on future generations.
THE CONCEPT OF MONEY
Money serves three functions: a medium of exchange, a store of value, and a unit of account. Money Supply Definitions: M0 (base money, high powered money, monetary base): The value of all currency notes and coins in circulation in the economy, excluding those lying with the central bank. M1: M0 + all current (checking) deposits held with commercial banks. M2: M1 + all time deposits (accounts from which holders can withdraw only after giving notice).
WHAT DO COMMERCIAL BANKS DO?
Commercial banks take deposits (borrow money) and make loans (lend money). The interest rate on deposits is lower than on loans. Banks maintain a reserve ratio—cash reserves as a small ratio of total deposits—to balance liquidity and profitability. 📐 Formula: Reserve Ratio = Reserves / Deposits
THE MONEY CREATION PROCESS
When the government pays Rs.10 to a firm which deposits it in Bank A (with a 10% reserve ratio), the bank keeps Rs.1 as reserves and lends Rs.9. That Rs.9 is deposited in Bank B, which keeps Rs.0.90 and lends Rs.8.10. This process continues as an infinite converging series. 📐 Formula: Money Multiplier (MM) = 1 / reserve ratio (rr) M0 × MM = M2 ΔM2 = (1/rr) × ΔM0 📌 Example: With a 10% reserve ratio, an initial M0 expansion of Rs.10 has a total M2 impact of Rs.100. MM = 1/0.1 = 10. In the extreme, when rr = 100%, MM = 1, and M2 = M0.
BALANCE SHEET OF A CENTRAL BANK
The central bank's balance sheet has assets (loans to government, forex reserves, loans to private sector) and liabilities (notes, coins & currency in circulation, government & commercial bank deposits, liquidity paper issued).
⭐ Key Takeaways
Students must understand that in the short run, the four macroeconomic objectives are linked through the trade cycle, with expansion reducing unemployment but increasing inflation and BOPs deficits. In the long run, the relationships are more complex and depend on factors like whether growth is demand-led or supply-led, and whether it is ISI or export-oriented. The Salter-Swan diagram is crucial for analyzing internal and external balance, with the IB line sloping downward and the EB line sloping upward. Fiscal policy involves managing government spending and taxation, with taxes acting as a leakage that reduces the multiplier effect, and the Laffer curve showing that there is an optimal tax rate for revenue maximization. Finally, commercial banks create money through the fractional reserve system, where the money multiplier is the inverse of the reserve ratio.
🧠 Quick Revision Questions
- What happens to the four macroeconomic objectives during the expansionary phase of the trade cycle?
- Why does the Internal Balance (IB) line in the Salter-Swan diagram slope downward?
- What is the difference between vertical equity and horizontal equity in taxation?
- If the government spends Rs.10 bn and finances it entirely by increasing taxes by Rs.10 bn, will the multiplier effect be zero? Why or why not?
- How does a 10% reserve ratio lead to a money multiplier of 10, and what would happen if the reserve ratio increased to 20%?