📘 Lecture 35 — Politics
📖 Overview: This lecture defines organizational politics as the use of power beyond formal job requirements to influence the distribution of advantages and disadvantages. It explains why organizations are inherently political and explores the sources of political behavior, specific power tactics, and the ethical limits that must govern the use of power in organizations.
🗂️ Topics Covered
The lecture begins by defining political behavior and differentiating legitimate from illegitimate political actions. It then explains the four key reasons organizations are political (power structures, self-protection, unequal power distribution, and change). The sources of politics—limited resources, ambiguous decisions, ambiguous goals, and change—are detailed. A comprehensive section follows on ten specific power tactics used in organizations. The lecture concludes with a critical discussion of the ethical boundaries of power, addressing self-interest, the rights of others, and standards of equity and justice.
📝 Lecture Summary
Politics
When people get together in groups, power will be exerted. People want to carve out a niche from which to exert influence, to earn awards, and to advance their careers. When employees in organizations convert their power into action, we describe them as being engaged in politics. Those with good political skills have the ability to use their bases of power effectively. For our purposes, political behavior in organizations is defined as those activities that are not required as part of one’s formal role in the organization, but that influence, or attempt to influence, the distribution of advantages and disadvantages within the organization. This definition encompasses key elements from what most people mean when they talk about organizational politics. Political behaviour is outside one’s specified job requirements and requires some attempt to use one’s power bases. Additionally, this definition encompasses efforts to influence the goals, criteria, or processes used for decision making when we state that politics is concerned with “the distribution of advantages and disadvantages within the organization.” Our definition is broad enough to include such varied political behaviour as withholding key information from decision makers, whistle blowing, spreading rumours, leaking confidential information about organizational activities to the media, exchanging favours with others in the organization for mutual benefit, and lobbying on behalf of or against a particular individual or decision alternative.
🔑 Definition — Political Behavior: Activities that are not required as part of one’s formal role in the organization, but that influence, or attempt to influence, the distribution of advantages and disadvantages within the organization.
It is important to note that legitimate political behavior refers to normal everyday politics—complaining to your supervisor, bypassing the chain of command, forming coalitions, obstructing organizational policies or decisions through inaction or excessive adherence to rules, and developing contacts outside the organization through one’s professional activities. However, there are also illegitimate political behaviors that violate the implied rules of the game. Those who pursue such extreme activities are often described as individuals who “play hardball.” Illegitimate activities include sabotage, whistle-blowing, and symbolic protests such as wearing unorthodox dress or protest buttons and groups of employees simultaneously calling in sick. All organizations, particularly large ones, are political.
The vast majority of all organizational political actions are of the legitimate variety. The reasons are pragmatic: The extreme illegitimate forms of political behaviour pose a very real risk of loss of organizational memberships or extreme sanctions against those who use them and then fall short in having enough power to ensure they work.
Organizations are political for the following reasons:
- Organizations have power structures that compete amongst themselves. Different coalitions are formed in organizations between people who think alike. These coalitions then compete for power in the organization, and politics stem from this competition.
- Various groups within the organization protect themselves. In order to achieve this protection, they may either try to acquire power themselves or join coalitions that help them gain power.
- Power within an organization may be unequally distributed, which is dehumanizing. The unequal distribution of power creates a sense of unfairness in the organization and causes people to react by yearning for power.
- Organizations are faced with change, which encourages politics.
Sources of Politics in Organizations
Politics within organizations comes from the following sources:
Limited resources: Resources in organizations are limited, which often turns potential conflict into real conflict. If resources were abundant, then all the various constituencies within the organization could satisfy their goals. But because they are limited, not everyone’s interest can be provided for. Further, whether true or not, gains by one individual or group are often perceived as being at the expense of others within the organization. These forces create competition among members of the organization which results in politics.
Ambiguous decisions: Most decisions have to be made in a climate of ambiguity in the organization—where facts are rarely fully objective and thus are open to interpretation. People within organizations will use whatever influence they can to taint the facts to support their goals and interests. That, of course, creates the activities we call politicking.
Ambiguous goals: Another potential source of organizational politics is ambiguity of goals. If goals in an organization are ambiguous, people may want to interpret them to meet their personal goals. This also causes politics to stem up.
Change: In today’s world, change is important for every organization; organizations need to adapt to the rapidly changing environment in order to survive. People in the organization are often resistant to the change and try to evade the change through acquisition of power. This also causes politics to stem up in organizations.
Insight into Power in Organizations
Following is a detailed insight into power tactics in organizations:
-
Maintain alliance with powerful people: Formation of coalitions and alliances within organizations is a tactic of acquiring power. These coalitions could be formed between the managers and the workers as well. Therefore, the influence of the manager serves as the power for the worker. This power may be useful for the organization and, if used negatively, can also be harmful for the organization.
-
Embrace or demolish: The embrace or demolish principle applies especially to organizations which have been acquired. The top managers of acquired firms should either be sacked or embraced. If sacked, they would do no harm, but if demoted or relegated, they shall be a source of potential danger.
-
Divide and rule: It is a military strategy which can be applied in organizations as well. As organizations face politics, if people are divided, they are less likely to form alliances and coalitions.
-
Manipulate classified information: Having key information about the organization is a potential source of power. Therefore, manipulation of classified information serves to be a potential source of politics in organizations.
-
Look good on important projects: It is important to appear good on important projects to get the attention of higher-ups in the organization. Once the attention has been attained, better and more important projects shall be assigned, resulting in the acquisition of power.
-
Collect and use IOUs: Power seekers in organizations should provide favours to people, help them, get them out of distress, and cause them to be thankful to him or her. These people shall pay back when needed.
-
Avoid decisive engagements: Not opting for revolutionary change in the organization but making things change gradually should be the policy of the power seeker in the organization. This is what is suggested by the strategy of avoiding decisive engagements.
-
One step at a time (Camel’s head): This strategy is drawn from the story of the Arab and the Camel. It is important for the power seeker to make one move at a time and not to look for huge changes or achievements.
-
Wait for a crisis: It is important for a power seeker to wait and watch for a crisis which he or she can manage. It would then be easy for him or her to take charge and become the leader.
-
Take counsel with caution: It is important for managers and power seekers to take advice with caution and to assay each and every advice before acting upon it.
Final Word about Power
Power needs to be kept within “ethical” limits. The first question you need to answer addresses self-interest versus organizational goals. Ethical actions are consistent with the organization’s goals. Spreading untrue rumours about the safety of a new product introduced by your company, in order to make that product’s design team look bad, is unethical. However, there may be nothing unethical if a department head exchanges favours with his division’s purchasing manager in order to get a critical contract processed quickly.
The second question concerns the rights of other parties. If the department head described in the previous paragraph went down to the mail room during his lunch hour and read through the mail directed to the purchasing manager—with the intent of “getting something on him” so he’ll expedite your contract—he would be acting unethically. He would have violated the purchasing manager’s right to privacy.
The final question that needs to be addressed relates to whether the political activity conforms to standards of equity and justice. The department head who inflates the performance evaluation of a favoured employee and deflates the evaluation of a disfavoured employee—then uses these evaluations to justify giving the former a big raise and nothing to the latter—has treated the disfavoured employee unfairly. It is important to keep power within ethical limits in the organization and to refrain from activities which might hurt the organization.
💡 Why this matters: Understanding political behavior is critical for navigating organizational life. Recognizing that power politics is inevitable allows you to identify legitimate versus destructive tactics and to ensure your own use of influence remains ethical and aligned with organizational goals rather than self-serving manipulation.
⭐ Key Takeaways
Politics in organizations is the use of power outside one's formal role to influence the distribution of advantages and disadvantages, and it exists because of competing power structures, unequal power distribution, self-protection, and change. The key sources of politics are limited resources, ambiguous decisions, ambiguous goals, and organizational change. Ten specific power tactics were identified, including forming alliances with powerful people, dividing and ruling, manipulating information, collecting IOUs, and waiting for a crisis. Most political behavior is legitimate, but the distinction between legitimate (e.g., complaining to a supervisor, forming coalitions) and illegitimate (e.g., sabotage, whistle-blowing) is crucial, as illegitimate actions carry high personal risk. Finally, all use of power must be contained within ethical boundaries judged by three criteria: alignment with organizational goals (not self-interest), respect for others' rights (especially privacy), and conformity to standards of equity and justice.
🧠 Quick Revision Questions
- What is the formal definition of political behavior in organizations, and what key elements does it encompass?
- What are the four reasons organizations are inherently political?
- List and briefly describe three of the ten power tactics discussed in the lecture.
- What is the difference between legitimate and illegitimate political behavior, and why is most political action legitimate?
- What three ethical questions must be asked to determine if a political activity is ethical?
📘 Lecture 36 — GROUPS AND TEAMS
📖 Overview: This lecture provides a comprehensive overview of groups and teams in organizational settings, defining what constitutes a group and distinguishing between formal and informal types. It explores the reasons groups are formed, the five stages of group development, various group typologies, and the dynamics that influence group performance, drawing on classic studies like the Hawthorne studies and research by Schachter, Szilagyi, and Wallace.
🗂️ Topics Covered
The lecture begins by defining a group and distinguishing formal from informal groups, then explains the reasons for group formation such as propinquity, common activities, balance theory, exchange theory, and social needs. It details the five stages of group development: forming, storming, norming, performing, and adjourning. Additional types of groups (primary, in-group, out-group, reference group) are introduced. The core of the lecture examines group dynamics through the Hawthorne Studies, Stanley Schachter's study on cohesiveness and productivity, and Andrew Szilagyi and Marc Wallace's study on factors influencing cohesiveness. Finally, it discusses factors that determine group effectiveness, including task interdependence, shared dreams, and trust in leaders.
📝 Lecture Summary
Groups and Teams
A group is a team of people who are motivated to join, perceive each other as members, and interact. It can also be defined as two or more individuals, interacting and interdependent, who have come together to achieve particular objectives. Groups can be formal or informal. Formal groups are defined by the organization’s structure, with designated work assignments establishing tasks, and behaviors are directed toward organizational goals (e.g., an airline flight crew). Informal groups are alliances that are neither formally structured nor organizationally determined, forming naturally in response to the need for social contact (e.g., three employees from different departments who regularly eat lunch together). 💡 Why this matters: Understanding this distinction helps managers recognize both the official work structures and the unofficial social networks that influence employee behavior and performance.
Why Groups Are Formed
The reasons for group formation include:
- Propinquity: Spatial/geographical proximity, e.g., students in the same hostel room or coworkers with desks close together.
- Common activities, interactions, sentiments: Groups form when people engage in common activities (e.g., lunch), interact, and share sentiments.
- Balance theory, similar ideas, attitudes: Groups form when people share similar ideas and attitudes (e.g., religion, lifestyle, work), leading them to gel together.
- Exchange theory: Based on the reward-cost outcomes of interaction; when people find reward from interaction, they tend to form groups.
- Economic security/social needs: By joining a group, individuals reduce the insecurity of standing alone, feeling stronger and more resistant to threats.
Stages of Group Development
Groups are believed to pass through a standard sequence of five stages: forming, storming, norming, performing, and adjourning.
Forming: Characterized by great uncertainty about the group’s purpose, structure, and leadership. Members are testing the waters to determine acceptable behaviors. The stage is complete when members begin to think of themselves as part of a group.
Storming: A stage of intra-group conflict. Members accept the group but resist constraints on individuality, and there is conflict over who will control the group. Complete when a relatively clear hierarchy of leadership exists.
Norming: Close relationships develop, and the group demonstrates cohesiveness. There is a strong sense of group structure, identity, and camaraderie. Complete when the group structure solidifies and a common set of expectations about correct member behavior is assimilated.
Performing: The structure is fully functional and accepted. Group energy moves from getting to know each other to performing the task at hand. For permanent work groups, this is the last stage.
Adjourning: The group prepares for disbandment. High task performance is no longer top priority; attention is directed toward wrapping up activities. Member responses vary—some are upbeat, others depressed over the loss of camaraderie and friendships.
Types of Groups
In addition to formal and informal groups, other types include:
- Primary groups: Groups where members have face-to-face interaction (e.g., family, group of friends).
- In group: The group to which an individual feels he or she belongs (e.g., his friends, his organization).
- Out group: The group that is opposing the primary group.
- Reference group: The group to which a person yearns to belong (e.g., a group of high achievers, an important project team).
Group Dynamics
Group dynamics refers to the factors affecting group performance. In a high-performing group, group synergy often develops, where the group’s performance is more than the sum of individual contributions. Three classic studies help understand group dynamics:
Hawthorne Studies: Begun in 1924 at Western Electric’s Hawthorne Works, these studies initially examined the effect of illumination on productivity. Later, Elton Mayo and his associates concluded that behavior and sentiments are closely related, group influences significantly affect individual behavior, group standards establish individual worker output, and money is less a factor in determining output than group standards, group sentiments, and security. This led to a new emphasis on the human factor in organizations.
Stanley Schachter Study: This classic study showed the relationship between cohesiveness, induction (supervision), and productivity. Cohesiveness was defined as the average resultant force acting on members in a group. The results were:
| Cohesion | Induction | Productivity |
|---|---|---|
| Hi | Hi | Hi |
| Lo | Hi | Hi |
| Lo | Lo | Lo |
| Hi | Lo | Lowest |
- When both cohesion and induction are hi, productivity is hi.
- When cohesion is low but induction is high, productivity is still high (good supervision can increase productivity).
- When both are low, productivity is low.
- When cohesion is high but induction (supervision) is low, productivity is lowest. This is because members spend time socializing instead of working.
🔑 Definition — Cohesiveness: The average resultant force acting on members in a group.
🔑 Definition — Induction: In this context, refers to supervision or how group members are induced.
📌 Example: A highly cohesive sales team (hi cohesion) with a micromanaging supervisor (hi induction) will likely have high productivity (hi). Conversely, a highly cohesive team with a hands-off supervisor (lo induction) may have the lowest productivity as members chat instead of selling.
Andrew Szilagyi and Marc Wallace Study: This study showed factors that influence cohesiveness in groups:
- Agreement on group goals: Unanimous and complete agreement on goals increases cohesion.
- Frequency of interaction: Higher frequency of interaction increases the chance of sharing sentiments and understanding, increasing cohesion.
- Inter-group competition: Competition between groups causes members of the competing groups to unite, increasing cohesion.
Group Effectiveness
Whether groups are more effective than individuals depends on the criteria. Groups tend to be more accurate, make better quality decisions, are more creative, and achieve greater acceptance of solutions. Group effectiveness depends on the following factors:
- Task interdependence: How closely members must work to finish a task; how much they feel their performance depends on others.
- Outcome interdependence: How much members perceive rewards and punishments are related to cooperation or non-cooperation.
- Shared dreams: A similar vision among members makes the group more effective.
- Trusting Leaders: Trust in the leader’s ability to steer the group through difficult times is important.
- Realize the importance of task: Members should realize the importance of their task for overall group performance.
- Group members’ perceptions of fairness of their goals: If goals are not perceived as fair, legitimate, or good for the organization, effectiveness may be reduced.
⭐ Key Takeaways
This lecture establishes that groups are more than just collections of people; they are dynamic entities with a life cycle (forming to adjourning) and are formed for reasons ranging from proximity to the need for security. A critical insight from Schachter's study is that high cohesion without proper supervision (induction) can lead to the lowest productivity, proving that group spirit must be managed. The Hawthorne Studies fundamentally shifted focus to the human and social factors driving performance, showing that group norms and sentiments can outweigh financial incentives. Finally, for a group to be effective, factors like clear goals, trust in leadership, task interdependence, and a shared vision must all be aligned.
🧠 Quick Revision Questions
- What is the difference between a formal group and an informal group, and provide an example of each from the lecture?
- List the five stages of group development in order and briefly describe what happens in the "norming" stage.
- According to Schachter's study, what combination of cohesion and induction (supervision) leads to the lowest productivity, and why?
- What were the main conclusions of the Hawthorne Studies by Elton Mayo regarding what influences worker output?
- Name at least three factors that determine group effectiveness as discussed in the lecture.
📘 Lecture 37 — Dysfunctions of Groups
📖 Overview: This lecture examines the negative behavioral outcomes that can emerge within groups, including norm violation, groupthink, risky shift, and social loafing. It also introduces the concept of teams as distinct from groups, explores different types of teams, and provides guidelines for creating effective teams and team training.
🗂️ Topics Covered
The lecture covers four dysfunctions of groups: norm violation, groupthink with its symptoms and moderating variables, risky shift and its explanations, and social loafing with Ringelmann's rope-pulling experiment. It then transitions to define teams versus groups, describes three types of teams (cross-functional, virtual, and self-managed), and concludes with measures for team effectiveness and guidelines for team training.
📝 Lecture Summary
Dysfunctions of Groups
Dysfunctions of groups refer to the negative functions of groups. These include norm violation, groupthink, risky shift, and social loafing.
Norm Violation
Norm is the standard against which appropriateness of a behavior is judged. Thus, norms determine the behavior expected in a certain situation. By providing a basis for predicting others’ behaviors, norms enable people to behave in a manner consistent with and acceptable to the group. Without norms, the activities of the group would be chaotic. Groups often tend to violate norms by displaying antisocial behavior, lying, sexual harassment, rumor mongering, etc.
Group Think
The phenomenon of groupthink is related to norms. It describes a situation in which group pressures for conformity deter the group from critically appraising unusual, minority, or unpopular views. Groupthink is a disease that attacks many groups and can dramatically hinder their performance. It is the phenomenon that occurs when group members become so enamored of seeking concurrence; the norm for consensus overrides the realistic appraisal of alternative courses of action and the full expression of deviant, minority, or unpopular views. It describes deterioration in an individual’s mental efficiency, reality testing, and moral judgment as a result of group pressures.
Symptoms of the groupthink phenomenon are:
- Group members rationalize any resistance to the assumptions they have made. No matter how strongly the evidence may contradict their basic assumptions, members behave so as to reinforce those assumptions continually.
- Members apply direct pressures on those who momentarily express doubts about any of the group’s shared views or who question the validity of arguments supporting the alternative favored by the majority.
- Those members who have doubts or hold differing points of view seek to avoid deviating from what appears to be group consensus by keeping silent about misgivings and even minimizing to themselves the importance of their doubts.
- There appears to be an illusion of unanimity. If someone does not speak, it is assumed he or she is in full accord. In other words, abstention becomes viewed as a “Yes” vote.
Evidence suggests that not all groups are equally vulnerable to groupthink. Researchers have focused on three moderating variables—the group’s cohesiveness, its leader’s behavior, and its insulation from outsiders—but the findings have not been consistent. The most valid conclusions we can make are:
- Highly cohesive groups have more discussion and bring out more information, but it is unclear whether such groups discourage dissent.
- Groups with impartial leaders who encourage member input generate and discuss more alternative solutions.
- Leaders should avoid expressing a preferred solution early in the group’s discussion because this tends to limit critical analysis and significantly increase the likelihood the group will adopt this solution as the final choice.
- Insulation of the group leads to fewer alternatives being generated and evaluated.
💡 Why this matters: Groupthink can lead to catastrophic organizational decisions, such as the Challenger space shuttle disaster, where dissenting views were suppressed.
Risky Shift
In comparing group decisions with individual decisions of members within the group, evidence suggests that there are differences. In some cases, the group decisions are more conservative than the individual decisions. More often, the shift is toward greater risk. What appears to happen in groups is that the discussion leads to a significant shift in the positions of members toward a more extreme position in the direction toward which they were already leaning before the discussion. So conservative types become more cautious and the more aggressive types take on more risk. The group discussion tends to exaggerate the initial position of the group.
The risky shift can be viewed as a special case of groupthink. The decision of the group reflects the dominant decision-making norm that develops during the group’s discussion. Whether the shift in the group’s decision is toward greater caution or more risk depends on the dominant pre-discussion norm.
The greater occurrence of the shift toward risk has generated several explanations for the phenomenon:
- Discussion creates familiarization among members; as they become more comfortable with each other, they become more bold and daring.
- Our society values risk; we admire individuals willing to take risks, and group discussion motivates members to show they are at least as willing as their peers to take risks.
- The most plausible explanation: the group diffuses responsibility. Group decisions free any single member from accountability for the group’s final choice. Greater risk can be taken because even if the decision fails, no one member can be held wholly responsible.
🔑 Definition — Risky Shift: The tendency for group decisions to be more extreme (often riskier) than the average of individual members' initial positions, caused by diffusion of responsibility and social valuation of risk.
Social Loafing
Social loafing is the tendency for individuals to expend less effort when working collectively than when working individually. It directly challenges the logic that the productivity of the group as a whole should at least equal the sum of the productivity of each individual in that group.
A common stereotype about groups is that the sense of team spirit spurs individual effort and enhances the group’s overall productivity. In the late 1920s, a German psychologist named Ringelmann compared the results of individual and group performance on a rope-pulling task. He expected that the group’s effort would be equal to the sum of the efforts of individuals within the group; that is, three people pulling together should exert three times as much pull on the rope as one person, and eight people should exert eight times as much pull. Ringelmann’s results, however, did not confirm these expectations. Groups of three people exerted a force only two-and-a-half times the average individual performance. Groups of eight collectively achieved less than four times the solo rate. Therefore, increases in group size are inversely related to individual performance.
🔑 Definition — Social Loafing: The tendency for individuals to exert less effort when working collectively compared to working individually, challenging the assumption that group productivity equals the sum of individual efforts. 📐 Rule: Increases in group size → inversely related to individual performance. 📌 Example: In Ringelmann’s rope-pulling experiment, one person pulled with a certain force. Three people pulling together exerted only 2.5 times that force (not 3 times). Eight people together exerted less than 4 times the solo force (not 8 times), showing that as group size increased, individual effort decreased.
Teams
Groups and teams are not the same thing. A group is two or more individuals, interacting and interdependent, who have come together to achieve particular objectives. A team is a specially created group in an organization for some specific purposes. A work team is a group whose individual efforts result in a performance that is greater than the sum of those individual inputs.
Types of Teams
Cross-Functional Teams
Cross-functional teams consist of individuals from various departments of an organization. They are employees from about the same hierarchical level, but from different work areas who come together to accomplish a task. Cross-functional teams are an effective way to allow people from diverse areas within an organization (or even between organizations) to exchange information, develop new ideas and solve problems, and coordinate complex projects. Their early stages of development are often very time consuming as members learn to work with diversity and complexity. It takes time to build trust and teamwork, especially among people from different backgrounds, with different experiences and perspectives.
Virtual Teams
Virtual teams are teams that may never actually meet together in the same room—their activities take place on the computer via teleconferencing and other electronic information systems. Engineers in the United States can connect audibly and visually directly with counterparts all around the globe, sharing files via internet, electronic mail, and other communication utilities; all participants can look at the same drawing, print, or specification so decisions are made much faster. With electronic communication systems, team members can move in or out of a team or a team discussion as the issues warrant.
Self-Managed Teams
These teams consist of employees who are responsible for managing/performing tasks that reach and satisfy internal and external customers. These are generally composed of ten to fifteen people who take on the responsibilities of their former supervisors. Typically, this includes collective control over the pace of work, determination of work assignments, organization of breaks, and collective choice of inspection procedures. Fully self-managed teams (SMT) even select their own members and have the members evaluate each other’s performance. As a result, supervisory positions take on a decreased importance and may even be eliminated. SMTs lead to greater job satisfaction, higher productivity, positive attitudes, etc.
How to Make Effective Teams
In order to ensure effectiveness of teams, the following measures need to be adopted:
- Provide “right” environment, reward system, and communication system. The environment should be conducive enough for team members to put in their best efforts and adjust easily.
- Develop task interdependence. Interdependence of tasks creates a sense of responsibility and helps improve the team’s performance.
- The size of the team should be good enough for optimal performance.
- External competition may also result in increased performance.
- Exclusivity of the team also results in higher performance from the team.
Guidelines for Team Training
Following are some guidelines for team trainers:
- The trainer needs to establish his or her own credibility in order for the team members to listen.
- It is imperative that the team members be given proper orientation.
- Clearly defined and achievable goals should be set for the teams.
- Defined procedures should be spelt out.
- The trainer should oversee the performance and help tackle deviations.
- The trainer should gradually end intervention and involvement and let teams work on their own.
⭐ Key Takeaways
The four dysfunctions of groups—norm violation, groupthink, risky shift, and social loafing—all undermine group effectiveness by reducing critical thinking, increasing conformity, diffusing responsibility, and decreasing individual effort. Groupthink symptoms include rationalization, direct pressure, self-censorship, and illusion of unanimity, which can be moderated by impartial leadership and avoiding early expression of preferred solutions. Social loafing, demonstrated by Ringelmann’s rope-pulling experiment, shows that individual effort decreases as group size increases. Teams differ from groups in that teams produce performance greater than the sum of individual inputs, with types including cross-functional, virtual, and self-managed teams. Effective teams require the right environment, task interdependence, optimal size, and proper training with clear goals and gradual reduction of trainer involvement.
🧠 Quick Revision Questions
- What are the four dysfunctions of groups discussed in this lecture?
- List the four symptoms of groupthink and explain how each hinders group decision-making.
- What was Ringelmann’s finding in the rope-pulling experiment, and how does it relate to social loafing?
- How does diffusion of responsibility explain the risky shift phenomenon?
- What distinguishes a team from a group, and what are the three types of teams described in this lecture?
📘 Lecture 38 — Job Design
📖 Overview: This lecture examines how organizations define and structure jobs to enhance employee performance, motivation, and satisfaction. It traces the historical evolution of job design from specialization through scientific management to modern approaches like job rotation, enlargement, and enrichment, culminating in Hackman and Oldham’s Job Characteristics Model (JCM).
🗂️ Topics Covered
The lecture covers the history of job design from Adam Smith and Charles Babbage through Frederick Taylor’s scientific management, then introduces job rotation and job enlargement as developments from the 1950s-60s, followed by job enrichment. It presents Hackman and Oldham’s Job Characteristics Model explaining five core job dimensions (skill variety, task identity, task significance, autonomy, feedback) and three psychological states that motivate workers, concluding with five specific guidelines for redesigning jobs.
📝 Lecture Summary
History of Job Design
Until the nineteenth century, families grew what they needed, especially food. General craft jobs emerged as people produced goods like clothing and furniture to trade for necessities. Work became increasingly specialized — for example, clothing production splintered into weaving, tailoring, and sewing. This revolution accelerated with the Industrial Revolution in Europe (1700s-1800s) and later in the United States.
The two most influential students of specialization were Adam Smith and Charles Babbage. Smith, an eighteenth-century Scottish economist, originated the phrase division of labor in his 1776 book An Inquiry into the Nature and Causes of the Wealth of Nations. He described pin makers who specialized their jobs to produce many more pins per person per day than each could make alone. With specialization, one person drew wire, another clipped it, and so on. Smith attributed output increases to factors like increased dexterity from practice, decreased time changing operations, and development of specialized equipment. These principles provided the foundation for the assembly line.
Charles Babbage wrote On the Economy of Machinery and Manufacturers in 1832. He cited additional advantages of job specialization: relatively little time needed to learn specialized jobs, decreased waste, fewer tool and equipment changes, and improved skills through frequent repetition of tasks.
Frederick W. Taylor, the chief proponent of job specialization, argued that jobs should be scientifically studied, broken down into small component tasks, and standardized across all workers. His view was consistent with Smith and Babbage’s division of labor premises. In the 1950s and 1960s, Job Rotation and Job Enlargement were added to Job Design.
🔑 Definition — Specialization: Breaking down jobs into small, standardized component tasks to increase efficiency through repetition and reduced task-switching time.
Job Rotation
Job rotation involves systematically shifting workers from one job to another to sustain their motivation and interest. Under specialization, each task is broken down into small parts. For example, assembling pens might involve four steps: testing the ink cartridge, inserting the cartridge into the barrel, screwing the cap onto the barrel, and inserting the assembled pen into a box. One worker performs each task. When job rotation is introduced, the tasks stay the same, but workers are systematically rotated across the various tasks.
Job Enlargement
Job enlargement, or horizontal job loading, is expanding a worker’s job to include tasks previously performed by other workers. Before enlargement, workers perform a single specialized task; afterward, they have a “larger” job to do. This has now developed into job engineering, where increasing the efficiency of a job is stressed.
Job Enrichment
Job enrichment is a further development where opportunities are provided to employees to achieve, advance, and grow. Job rotation and enlargement seemed promising but eventually disappointed managers because they were intuitive, narrow approaches rather than fully developed, theory-driven methods. Consequently, a more complex approach—job enrichment—was developed. It entails giving workers more tasks to perform and more control over how to perform them. Job enrichment programs are also being criticized today due to certain factors.
💡 Why this matters: Understanding the progression from simple specialization to enrichment helps managers choose appropriate job design strategies based on worker needs and organizational goals.
Method of Job Design — Hackman and Oldham’s Job Characteristics Model (JCM)
Turner and Lawrence’s requisite task attributes theory laid the foundation for what is today the dominant framework: Hackman and Oldham’s Job Characteristics Model (JCM) . According to JCM, any job can be described in terms of five core job dimensions:
Skill Variety — The degree to which the job requires a variety of different activities so the worker can use a number of different skills and talents.
Task Identity — The degree to which the job requires completion of a whole and identifiable piece of work.
Task Significance — The degree to which the job has a substantial impact on the lives or work of other people.
Autonomy — The degree to which the job provides substantial freedom, independence, and discretion to the individual in scheduling the work and in determining the procedures to be used in carrying it out.
Feedback — The degree to which carrying out the work activities required by the job results in the individual obtaining direct and clear information about the effectiveness of his or her performance.
Result — Three Psychological States
The five core job dimensions create three psychological states that motivate workers:
Meaningfulness — The degree to which the individual experiences the job as generally meaningful, valuable, and worthwhile. This cognitive state involves how employees perceive their work as making a valued contribution.
Responsibility — The degree to which individuals feel personally accountable and responsible for the results of the work. This state concerns the extent to which employees feel personally responsible for the work being done.
Knowledge of results — The degree to which individuals continuously understand how effectively they are performing the job. Coming directly from feedback, this state involves how employees understand their job performance.
Guidelines for Job Design
Based on the JCM, five specific types of changes are most likely to improve job potential:
Combine tasks — Managers should take existing fractionalized tasks and put them back together to form a larger module of work. This increases skill variety and task identity.
Create natural work units — The tasks an employee does should form an identifiable and meaningful whole. This increases employee “ownership” of the work and improves the likelihood that employees view their work as meaningful rather than irrelevant and boring.
Establish client relationship — The client is the user of the product or service. Managers should try to establish direct relationships between workers and their clients. This increases skill variety, autonomy, and feedback.
Expand jobs vertically — Vertical expansion gives employees responsibilities and control formerly allocated to management. It partially closes the gap between “doing” and “controlling” aspects of the job, increasing employee autonomy.
Open feedback channels — By increasing feedback, employees learn how well they are performing and whether their performance is improving, deteriorating, or remaining constant. Ideally, feedback should be received directly as the employee does the job, rather than from management occasionally.
⭐ Key Takeaways
The lecture demonstrates that job design has evolved from extreme specialization (Adam Smith, Charles Babbage, Frederick Taylor) to more holistic approaches like job rotation, enlargement, and enrichment. The most comprehensive framework is Hackman and Oldham’s Job Characteristics Model, which identifies five core job dimensions (skill variety, task identity, task significance, autonomy, feedback) that produce three critical psychological states (meaningfulness, responsibility, knowledge of results) necessary for worker motivation. Five practical guidelines for redesigning jobs include combining tasks, creating natural work units, establishing client relationships, expanding jobs vertically, and opening feedback channels. Students must remember that job design directly impacts employee motivation, performance, and satisfaction, and that the JCM provides the theoretical foundation for effective job redesign.
🧠 Quick Revision Questions
- What are the five core job dimensions in Hackman and Oldham’s Job Characteristics Model, and which one involves the degree of freedom in scheduling work?
- How did Adam Smith and Charles Babbage differ in their contributions to understanding job specialization?
- What is the difference between job rotation, job enlargement, and job enrichment?
- What three psychological states are produced by the five core job dimensions, and which state is directly linked to feedback?
- According to the guidelines for job design, what is the purpose of “creating natural work units,” and what two core dimensions does this guideline affect?