π Lecture 43 β Bipolar Junction Transistor (BJT)
π Overview: This lecture introduces the Bipolar Junction Transistor (BJT), a three-terminal semiconductor device. It covers the physical construction and doping of NPN and PNP transistors, their symbols, and the biasing conditions (forward/reverse) for the emitter-base and collector-base junctions. The lecture also explains the three operating configurations (common base, common emitter, common collector) and the three fundamental modes of operation (cut-off, active, and saturation), including their characteristic graphs and biasing conditions.
ποΈ Topics Covered
The lecture begins by explaining the construction of a BJT as a three-layer semiconductor device with heavily doped emitter, lightly doped base, and very lightly doped collector. It then details the two types (NPN and PNP) and their circuit symbols. The operation of the PNP transistor is analyzed by examining the forward-biased emitter-base junction and the reverse-biased collector-base junction. The three operating configurations (common base, common emitter, common collector) are listed, followed by the directions of currents in a BJT. The three modes of operation (cut-off, active, saturation) are defined based on the biasing of the two PN junctions. Finally, graphical presentations are provided, including the input characteristic (exponential curve of collector current vs. VBE) and the output or collector characteristic for the common base configuration.
π Lecture Summary
Bipolar Junction Transistor (BJT) Construction
The BJT is a three-layer semiconductor device that consists of either two n-type and one p-type layers (NPN) or two p-type and one n-type layers (PNP). It has three terminals: Emitter, Base, and Collector. The emitter layer is heavily doped to emit electrons (or holes). The base layer is lightly doped and very thin (thickness ratio of about 150:1 compared to other layers); it helps transfer minority carriers from emitter to collector. The collector is very lightly doped and collects the emitted carriers. There are two basic types: the NPN transistor and the PNP transistor.
Bipolar Junction Transistor The Symbol for NPN Transistor
The circuit symbol for the NPN transistor has an arrow on the emitter terminal pointing outward (away from the base), indicating the direction of conventional current flow.
Bipolar Junction Transistor The Symbol for PNP Transistor
The circuit symbol for the PNP transistor has an arrow on the emitter terminal pointing inward (toward the base).
Bipolar Junction Transistor Operation in PNP Transistor Emitter Base Junction
When the emitter-base junction (p-type emitter, n-type base) is forward-biased (positive terminal of battery to emitter, negative to base), the depletion layer shrinks, allowing majority carriers to cross the junction.
Collector Base Junction
When the collector-base junction (p-type collector, n-type base) is reverse-biased (positive terminal of battery to base, negative to collector), the depletion layer widens, and current flows due to minority carriers.
In a typical PNP circuit, the emitter is positive and the base is negative (VEE forward biases the EBJ), while the base is positive and the collector is negative (VCC reverse biases the CBJ). The total emitter current (I_E) flows inward (into the transistor), while the base current (I_B) and collector current (I_C) flow outward from the transistor.
Operating Configurations of BJT
There are three basic operating configurations:
- Common Base Configuration
- Common Emitter Configuration
- Common Collector Configuration
Directions of Currents in BJT
The relative directions of the emitter, base, and collector currents are shown in circuit diagrams. In an NPN transistor, emitter current flows out, base current flows in, and collector current flows in. In a PNP transistor, the directions are opposite.
Modes of Operation of BJT
There are three modes of operation based on the biasing of the base-emitter junction (BEJ) and the base-collector junction (BCJ):
- Cut Off: Both junctions are reverse-biased. The transistor is βOFF,β and no current flows.
- Active Mode: The BEJ is forward-biased, and the BCJ is reverse-biased. The transistor operates as an amplifier.
- Saturation: Both junctions are forward-biased. The transistor is βONβ (fully conducting).
Graphical Presentation of BJT
The input or driving point characteristic is a graph of collector current (I_C) versus base-emitter voltage (V_BE). The curve shows an exponential rise in I_C starting at about 0.5 volts and saturating at 0.7 volts. π Formula: I_C = I_S * e^(V_BE / V_T) β The collector current is equal to the saturation current (I_S) times an exponential function of the base-emitter voltage (V_BE) divided by the thermal voltage (V_T).
Graphical Presentation of BJT Output or Collector Characteristic for Common Base Configuration
This graph plots collector current (I_C) on the y-axis against collector-emitter voltage (V_CE) on the x-axis. Below a certain base current (e.g., 50 ΞΌA), it is the cut-off region. The area along the y-axis is the saturation region, where I_C is maximum and V_CE is minimum. The unshaded area between these two regions is the active region, which depends on I_C, base current, and V_CE.
Modes of Operation of BJT (Table)
The lecture provides a summary table for the biasing of the two junctions in each mode:
- Cut Off: EBJ = Reverse, CBJ = Reverse
- Active: EBJ = Forward, CBJ = Reverse
- Saturation: EBJ = Forward, CBJ = Forward
This table is then used to determine the mode of operation for given transistor circuits.
β Key Takeaways
The most critical concepts to remember are the physical construction of a BJT (three layers, three terminals) with specific doping levels (emitter heavily, base lightly, collector very lightly) and the extremely thin base. The two basic types are NPN and PNP, and their circuit symbols show the direction of conventional current (arrow on emitter). The mode of operation (cut-off, active, saturation) is strictly defined by the biasing of the two PN junctions: both reverse = cut-off, one forward one reverse = active, both forward = saturation. The input characteristic shows an exponential relationship between collector current and base-emitter voltage, with conduction starting around 0.5V and saturating at 0.7V. Finally, the three common configurations (common base, common emitter, common collector) are fundamental ways to connect the transistor in a circuit.
π§ Quick Revision Questions
- What are the three layers of a BJT, and what are the respective doping levels (heavy, light, very light) for an NPN transistor?
- Draw the circuit symbols for both NPN and PNP transistors, and indicate the direction of conventional current flow on the emitter terminal.
- A transistor has a forward-biased base-emitter junction and a reverse-biased base-collector junction. What is its mode of operation?
- From the input characteristic graph, at approximately what voltage does the collector current begin to rise exponentially?
- Name the three operating configurations for a BJT.
π Lecture 44 β Bipolar Junction Transistor (BJT)
π Overview: This lecture introduces the BJT's internal current relationships, focusing on the three fundamental currents (collector, base, emitter) and their mathematical interdependencies. It then transitions into DC biasing techniques, specifically fixed bias and emitter-stabilized bias circuits, which are essential for establishing stable operating points in transistor amplifiers.
ποΈ Topics Covered
The lecture begins by defining the three BJT currents (collector, base, emitter) and their relationships through constants like Ξ² and Ξ±, including a solved example demonstrating saturation detection. It then covers DC biasing for BJTs, starting with the fixed bias circuit, its DC equivalent, loop equations for base-emitter and collector-emitter loops, and load line analysis with a graphical example. Finally, it introduces the emitter-stabilized bias circuit, deriving equations for the base-emitter and collector-emitter loops, and concludes with the concept of stabilization achieved by adding an emitter resistor.
π Lecture Summary
THE CURRENTS OF A BJT
The BJT has three terminal currents: collector current ($I_C$), base current ($I_B$), and emitter current ($I_E$). The collector current is given by $I_C = I_S e^{(V_{BE}/V_T)}$, where $I_S$ is the saturation current (also called the current scale factor). The base current is derived from the collector current using the common emitter current gain $\beta$: $I_B = I_C / \beta$, where $\beta = I_C / I_B$. The emitter current is the sum of base and collector currents: $I_E = I_B + I_C$. Substituting $I_B = I_C / \beta$ gives $I_E = I_C (\beta+1)/\beta$. Alternatively, the common base current gain $\alpha$ is defined as $\alpha = \beta / (\beta+1)$, allowing $I_C = \alpha I_E$ and $I_E = (I_S / \alpha)e^{(V_{BE}/V_T)}$. Also, $\beta = \alpha / (1-\alpha)$.
π Definition β Saturation current ($I_S$): The current scale factor used in the exponential diode equation for the BJT. π Formula: $I_C = I_S e^{(V_{BE}/V_T)}$ β The collector current depends exponentially on the base-emitter voltage. π Example: Show the transistor is in saturation. Given a circuit with $V_{CC}=10V$, $V_{BB}=6V$, $R_E=3.3k\Omega$, $R_C=4.7k\Omega$, $\beta=100$. For the input loop: $6 - V_{BE} - I_E(3.3k)=0$. Rearranging $I_E = (6-0.7)/3.3k = 1.61mA$. Then $I_B = I_E/101 = 1.61m/101 = 15.94\mu A$. Also $V_E = I_E R_E = 1.61m(3.3k) = 5.3V$. $I_C = 15.94\mu(100) = 1.59mA$. For the output loop: $10 - 1.59m(4.7k) - V_C = 0$, so $V_C = 10 - 7.49 = 2.50V$. Since $V_C < V_B$, the transistor is in saturation. π‘ Why this matters: The condition $V_C < V_B$ (collector voltage less than base voltage) confirms the base-collector junction is forward-biased, which defines saturation.
DC BIASING-BJT: Fixed Bias Circuit
The fixed bias circuit is the simplest BJT biasing configuration. Its DC equivalent shows the base-emitter forward bias loop. Applying KVL to the base-emitter loop: $V_{CC} - I_B R_B - V_{BE} = 0$, so $I_B = (V_{CC} - V_{BE})/R_B$. For the collector-emitter loop: $V_{CE} + I_C R_C - V_{CC} = 0$, giving $V_{CE} = V_{CC} - I_C R_C$. Also $V_{CE} = V_C - V_E$; since $V_E=0$ in this case, $V_{CE} = V_C$. Also $V_{BE} = V_B - V_E$ and $V_E=0$, so $V_{BE} = V_B$.
π Definition β Fixed bias circuit: A biasing configuration where a single resistor $R_B$ connects the base to $V_{CC}$, establishing the base current. π Formula: $I_B = (V_{CC} - V_{BE})/R_B$ β Base current is determined by the voltage drop across $R_B$ divided by $R_B$. π Formula: $V_{CE} = V_{CC} - I_C R_C$ β Collector-emitter voltage is the supply voltage minus the drop across the collector resistor. π Example: Find $I_{CQ}$, $I_{BQ}$, $V_{CEQ}$, $V_B$, $V_C$, $V_{BC}$ with $\beta=50$. (Circuit values assumed from context: $V_{CC}=12V$, $R_B=240k\Omega$, $R_C=2.2k\Omega$, $V_{BE}=0.7V$). $I_B = (12-0.7)/240k = 47.08\mu A$. $I_C = \beta I_B = 50(47.08\mu) = 2.35mA$. $V_{CE} = V_{CC} - I_C R_C = 12 - 2.35m(2.2k) = 12 - 5.17 = 6.83V$. $V_B = V_{BE} = 0.7V$. $V_C = V_{CE} = 6.83V$. $V_{BC} = V_B - V_C = 0.7 - 6.83 = -6.13V$ (reverse-biased).
LOAD LINE ANALYSIS
The output equation of the fixed bias circuit is $V_{CE} = V_{CC} - I_C R_C$, which is a straight line. The x-intercept ($I_C=0$) gives $V_{CE} = V_{CC}$. The y-intercept ($V_{CE}=0$) gives $I_C = V_{CC}/R_C$. These two points define the DC load line on the transistor's output characteristics. The slope of the load line is determined by $-1/R_C$.
π Formula: $I_C = V_{CC}/R_C$ (when $V_{CE}=0$) β Maximum possible collector current if $V_{CE}$ drops to zero. π Example: Given a curve, find $V_{CC}$, $R_C$, and $R_B$ for the fixed bias circuit. From the graph, when $I_C=0$, $V_{CE}=V_{CC}=20V$. When $V_{CE}=0$, $I_C=V_{CC}/R_C=10mA$, so $R_C = 20/10m = 2k\Omega$. For $I_B=25\mu A$, $R_B = (V_{CC} - V_{BE})/I_B = (20-0.7)/25\mu = 772k\Omega$.
DC BIASING-BJT: Emitter-Stabilized Bias Circuit
The emitter-stabilized bias circuit adds a resistor $R_E$ in the emitter leg for improved stability. For the base-emitter loop: KVL gives $V_{CC} - I_B R_B - V_{BE} - I_E R_E = 0$. Substituting $I_E = (\beta+1)I_B$ yields $V_{CC} - I_B R_B - V_{BE} - (\beta+1)I_B R_E = 0$. Solving: $I_B = (V_{CC} - V_{BE}) / (R_B + (\beta+1)R_E)$. For the collector-emitter loop: $I_E R_E + V_{CE} + I_C R_C - V_{CC} = 0$. Assuming $I_E \approx I_C$, $V_{CE} = V_{CC} - I_C(R_C + R_E)$. The emitter voltage $V_E = I_E R_E$, collector-to-ground $V_C = V_{CE} + V_E = V_{CC} - I_C R_C$. The base voltage $V_B = V_{CC} - I_B R_B = V_{BE} + V_E$.
π Definition β Emitter-stabilized bias circuit: A biasing configuration with an emitter resistor $R_E$ that provides negative feedback for thermal stability. π Formula: $I_B = (V_{CC} - V_{BE}) / (R_B + (\beta+1)R_E)$ β Base current now depends on a larger effective resistance including $(\beta+1)R_E$. π Example: (From lecture) $I_E R_E + V_{CE} + I_C R_C - V_{CC} = 0$ and $V_{CE} = V_{CC} - I_C(R_C + R_E)$.
Stabilization
Stabilization refers to the ability of a biasing circuit to keep DC bias currents and voltages constant despite changes in temperature and transistor beta ($\beta$). The addition of the emitter resistor $R_E$ provides negative feedback: if $I_C$ increases (due to temperature), $I_E$ increases, causing a larger voltage drop across $R_E$. This reduces $V_{BE}$ (since $V_B$ is fixed), which in turn reduces $I_B$, counteracting the original increase in $I_C$.
π‘ Why this matters: Stabilization is crucial for reliable circuit operation because transistor parameters (especially $\beta$) vary significantly with temperature and between individual devices.
β Key Takeaways
The three BJT currents are interrelated by the constants $\beta$ and $\alpha$, where $\beta = I_C/I_B$ and $\alpha = \beta/(\beta+1)$, with $\alpha$ being slightly less than 1. The fixed bias circuit, while simple, has poor thermal stability because its base current depends only on $V_{CC}$ and $R_B$. Load line analysis provides a graphical method to determine the quiescent operating point ($Q$-point) by intersecting the transistor's output characteristic curves with the load line defined by $V_{CE} = V_{CC} - I_C R_C$. The emitter-stabilized bias circuit significantly improves stability by incorporating $R_E$, which provides negative feedback that opposes changes in collector current. The condition for saturation is $V_C < V_B$ (base-collector junction forward-biased), which the solved example demonstrated.
π§ Quick Revision Questions
- Derive the relationship between $I_E$, $I_C$, and $\beta$ starting from $I_E = I_B + I_C$ and $I_B = I_C/\beta$.
- In the fixed bias circuit, what are the two intercepts of the DC load line on the transistor output characteristics?
- Explain how adding an emitter resistor $R_E$ improves the stability of the biasing circuit against temperature changes.
- For the BJT saturation example, calculate $V_B$ and $V_C$ and state the condition that confirms saturation.
- Write the KVL equation for the base-emitter loop of the emitter-stabilized bias circuit and derive the expression for $I_B$.
π Lecture 45 β Bipolar Junction Transistor BJT-circuit analysis
π Overview: This lecture covers the analysis of BJT circuits with different biasing configurations, focusing on emitter-stabilized bias circuits, voltage divider bias, and biasing using two power supplies. Understanding these biasing techniques is essential for designing amplifier circuits that maintain stable operation regardless of temperature variations and transistor parameter variations.
ποΈ Topics Covered
The lecture begins with emitter-stabilized bias circuit load line analysis and includes example problems for finding base voltage limits for active mode operation and determining resistor values. It then covers voltage divider bias circuit analysis using ThΓ©venin's theorem, followed by a complex multi-transistor example with iterative calculations. Finally, biasing using two power supplies is introduced with a common base amplifier design example.
π Lecture Summary
Emitter-Stabilized Bias Circuit: Load Line Analysis
The collector-emitter loop equation defining the load line is: VCE = VCC - IC(RC + RE). For IC = 0mA, VCE = VCC. For VCE = 0, IC = VCC/(RC + RE). This load line represents all possible operating points for the transistor.
Example: Finding Maximum Base Voltage for Active Mode
Scenario: Zammad is designing an amplifier circuit. Find the highest voltage to which the base can be raised while the transistor remains in active mode. Assume Ξ±=1.
Solution: Let the base voltage for active operation be V. For active mode, consider VB = VC = V.
For the output loop: 10 - 4.7kΞ©(IC) - VC = 0 (Equation 1)
For the base-emitter loop: VB - VBE - IE(RE) = 0 (Equation 2)
Since Ξ±=1, IC = IE
From Equation (2): IE = (VB - VBE)/RE = (V - 0.7)/3.3kΞ©
Substituting into Equation (1): 10 - (V-0.7)(4.7/3.3) - V = 0 3.3(10) - 4.7V - 3.29 - 3.3V = 0 8V = 29.71 V = 3.71V
π‘ Why this matters: This calculation ensures the transistor stays in the active region where it can amplify signals linearly without distortion.
Example: Finding RC and RE
Given parameters: IC = 0.5mA, Ξ± = 1, VCB = 2V
Solution: For the output loop using KVL: (10-6)/0.5mA = RC RC = 8kΞ©
Since Ξ±=1, IC = IE = 0.5mA
For the base-emitter loop using KVL: (4-0.7)/0.5mA = RE RE = 6.6kΞ©
DC BIASING-BJT: Voltage Divider Bias Circuit
The voltage divider bias circuit uses two resistors R1 and R2 to establish a stable base voltage independent of transistor Ξ².
Applying ThΓ©venin's theorem: RTh = R1 || R2, ETh = VR2 = R2VCC/(R1+R2)
The ThΓ©venin equivalent circuit gives the KVL equation: ETh - IBRTh - VBE - IERE = 0
Putting IE = (Ξ²+1)IB and solving for IB: IB = (ETh - VBE)/(RTh + (Ξ²+1)RE)
π Definition β Voltage Divider Bias: A biasing method using two resistors to create a stable base voltage that makes the operating point relatively independent of transistor beta variations.
Once IB is known, the remaining problem may be solved exactly as in the previous configurations.
Example: Find Voltage at All Nodes and Current Through All Branches
Given: Ξ² = 100
Solution: Using ThΓ©venin's theorem: VBB = 15(RB2)/(RB1+RB2) = 15(50)/150 = 5V
RBB = RB1 || RB2 = 100kΞ© || 50kΞ© = 33.3kΞ©
Writing KVL for loop L: VBB = IBRBB + VBE + IERE
Putting IB = IE/(Ξ²+1): IB = 1.29/101 = 0.0128mA
Base voltage: VB = VBE + IERE = 0.7 + 1.29(3) = 4.57V
Assuming active mode, collector current: IC = Ξ±IE = 0.99(1.29) = 1.28mA
Collector voltage: VC = 15 - ICRC = 15 - 1.28(5) = 8.6V
Example: Multi-Transistor Circuit Analysis
Find voltages at all nodes and current through all branches.
Solution: Assume Q1 is in active mode: VB1 = 4.57V, IE1 = 1.29mA, IB1 = 0.0128mA, IC1 = 1.28mA
VC1 = 15 - IC1RC1 = 15 - (1.28)5 = 8.6V
Assume Q2 emitter-base junction is forward biased: VE2 = VC1 + VEB = 8.6 + 0.7 = 9.3V
IE2 = (15-VE2)/RE2 = (15-9.3)/2k = 2.85mA
IC2 = Ξ±IE2 = 0.99(2.85m) = 2.82mA (Ξ²=100)
VC2 = IC2RC = 7.62V
Since VC2 is lower than VB2 = VC1 by 0.98V, Q2 is active.
Iteration for accuracy: IB2 = IE2/(Ξ²2+1) = 2.85m/101 = 0.028mA
IC1 = IRc1 - IB2 = 1.25mA VC1 = 15 - 5(1.252m) = 8.74V
VE2 = 8.74 + 0.7 = 9.44V IE2 = (15-9.44)/2k = 2.78mA
IC2 = 0.99(2.78m) = 2.75mA VC2 = 2.75(2.7) = 7.43V
IB2 = 2.78/101 = 0.0275mA
π‘ Why this matters: Multi-transistor circuits require iterative analysis because the base current of one transistor affects the collector current calculation of the previous transistor, requiring successive approximations for accuracy.
Biasing Using Two Power Supplies
The loop equation for the loop marked as L is derived for circuits using both positive and negative supply voltages, providing more design flexibility and better stability.
Example: Common Base Amplifier Design
Design the circuit to establish a DC emitter current of 1mA and provide the highest possible gain while allowing for a maximum signal swing of Β±2V at the collector. Use +10V and -5V power supplies.
Solution: Since the amplifier is to be used in common base configuration, RB = 0.
Considering the base-emitter junction forward biased: RE = (-0.7 - (-5))/1mA = 4.3kΞ©
To allow for Β±2V signal swing at the collector while choosing as large a value of RC as possible: Set VC = +2V (so -2V signal would not saturate the BJT)
RC = (10-2)/IC = 8/1mA RC = 8kΞ©
π Formula: For common base amplifier design: RE = (VEE - VBE)/IE and RC = (VCC - VC)/IC, where VC is chosen to allow maximum signal swing without saturation.
β Key Takeaways
The load line analysis for emitter-stabilized bias circuits defines all possible operating points, with the endpoints being VCE = VCC and IC = VCC/(RC+RE). Voltage divider bias provides stable biasing by using ThΓ©venin's theorem to simplify the base circuit, resulting in base current IB = (ETh - VBE)/(RTh + (Ξ²+1)RE). When analyzing multi-transistor circuits, iterative calculations are necessary because the base current of one transistor modifies the collector current of the preceding stage. For common base amplifier design using two power supplies, the emitter resistor establishes the DC emitter current while the collector resistor is chosen to allow maximum signal swing without entering saturation. The key design goal is always to maintain the transistor in the active region where it can provide linear amplification.
π§ Quick Revision Questions
- What are the two endpoints of the load line for an emitter-stabilized bias circuit?
- How do you calculate the ThΓ©venin equivalent voltage and resistance for a voltage divider bias circuit?
- In the multi-transistor example, why was iteration necessary when calculating IC1 and IB2?
- What is the formula for finding RC in a common base amplifier design given power supply voltages and desired signal swing?
- Why does setting VC = +2V in the common base amplifier example prevent the BJT from saturating during -2V signal swings?