📘 Lecture 8 — Conservation of Energy
📖 Overview: This lecture introduces the concept of potential energy as stored energy of position and explores how it converts to kinetic energy. It explains conservation of mechanical energy through gravitational and spring systems, and distinguishes between conservative and non-conservative forces.
🗂️ Topics Covered
The lecture covers gravitational potential energy and its storage in the gravitational field, elastic potential energy in springs derived from work, kinetic energy's dependence on reference frame, total mechanical energy conservation with examples of thrown balls and rollercoaster motion, the relationship between force and potential energy using calculus, and the definition of conservative forces.
📝 Lecture Summary
1. Potential Energy is Stored Energy of Position
Potential energy is the energy "locked up" somewhere that can do work. An object stores energy as the result of its position. This stored energy of position has the ability or capacity to do work like other forms of energies. Potential energy can be converted into kinetic energy, which follows directly from Newton's Laws.
🔑 Definition — Potential Energy: The stored energy of position possessed by an object.
2. Gravitational Potential Energy
If you lift a stone of mass m from the ground up a distance x, you do work against gravity. The constant force is mg, so W = mgx. By conservation of energy, the work done by you was transformed into gravitational potential energy whose value is exactly equal to mgx.
💡 Why this matters: The energy is stored neither in the mass nor in the earth — it is stored in the gravitational field of the combined system of stone + earth.
📐 Formula: W = mgx → Work done equals gravitational potential energy stored.
3. Elastic Potential Energy in a Spring
Suppose you pull on a spring and stretch it by an amount x away from its equilibrium position. The spring gets harder to pull as it becomes longer. When extended by x and you pull a further distance dx, the small work done is dW = Fdx = kxdx. Adding all small bits of work gives total work:
W = ∫₀ˣ Fdx = ∫₀ˣ kxdx = ½kx²
This work was transformed into energy stored in the spring. The spring contains energy exactly equal to ½kx².
🔑 Definition — Elastic Potential Energy: Energy stored in a deformed spring, equal to the work done to stretch or compress it.
📐 Formula: V = ½kx² → Energy stored in a spring, where k is the spring constant and x is the displacement from equilibrium.
4. Kinetic Energy and Reference Frames
Kinetic energy obviously depends on the frame you choose to measure it in. If you are running with a ball, it has zero kinetic energy with respect to you. But someone standing will see it has kinetic energy.
Example: A box of mass 12 kg is pushed with a constant force so that its speed goes from zero to 1.5 m/s (as measured by a person at rest on the cart) and it covers a distance of 2.4 m. No friction.
📌 Example — Work-Energy Theorem:
- Change in kinetic energy: ΔK = K_f − K_i = ½(12 kg)(1.5 m/s)² − 0 = 13.5 J
- Constant acceleration: a = (v_f² − v_i²) / [2(x_f − x_i)] = (1.5² − 0) / [2(2.4)] = 0.469 m/s²
- Net force: F = ma = (12 kg)(0.469 m/s²) = 5.63 N
- Work done: W = FΔx = (5.63 N)(2.4 m) = 13.5 J (same as ΔK)
This clearly shows that work and energy have different values in different frames.
5. Energy in Different Frames
Suppose somebody is standing on the ground and the trolley moves at 15 m/s relative to the ground. With the box speed relative to ground being 16.5 m/s:
📌 Example — Different Frame Calculation: ΔK' = K'_f − K'_i = ½(12)(16.5)² − ½(12)(15.0)² = 284 J
This demonstrates that the measured kinetic energy change differs between reference frames.
6. Conservation of Mechanical Energy
The total mechanical energy is: E_mech = KE + PE. If there is no friction, then E_mech is conserved. This means the sum does not change with time.
Example: A ball thrown upwards at speed v₀. How high will it go? The loss of kinetic energy equals the gain of potential energy: ½mv₀² = mgh, so h = v₀²/2g.
Example — Frictionless Motion Over Hills: Even though the motion is complicated, total energy is constant to get speeds at points B, C, D:
- At point A: ½mv_A² + 0
- At point B: ½mv_B² + mgh → v_B = √(v_A² − 2gh)
- At point C: ½mv_C² + 0 → v_C = √(v_A² + 2gh)
- At point D: ½mv_D² + mgh/2 → v_D = √(v_A² + gh)
Where h is height, loss of potential energy equals gain in kinetic energy.
7. Conservative Forces and Potential Energy
Potential energy has meaning only for a force that is conservative. Friction is an example of a non-conservative force and a potential energy cannot be defined for it. For a conservative force, F = −dV/dx.
🔑 Definition — Conservative Force: A force for which the work done in going from point A to point B is independent of the path chosen.
For a spring: V = ½kx², so F = −dV/dx = −kx (Hooke's law).
8. Derivation of F = −dV/dx
If a particle moves distance Δx in a potential V, then change in PE is ΔV = −FΔx. From this, F = −ΔV/Δx. Let Δx → 0: F = −lim(ΔV/Δx) as Δx→0 = −dV/dx
⭐ Key Takeaways
Energy conservation is fundamental: gravitational potential energy is mgh and elastic potential energy is ½kx², both derived from work done against forces. Mechanical energy (KE + PE) is conserved only for conservative systems without friction. Kinetic energy values are reference-frame dependent, while changes in potential energy define conservative forces via the relation F = −dV/dx. The work-energy theorem connects net work to changes in kinetic energy across all frames.
🧠 Quick Revision Questions
- What is potential energy and where is gravitational potential energy actually stored?
- Derive the expression for the elastic potential energy stored in a spring.
- Why do measured values of kinetic energy and work differ between reference frames?
- State the law of conservation of mechanical energy and give an example.
- How is the force related to potential energy for a conservative force, and how is this derived?
📘 Lecture 9 — MOMENTUM
📖 Overview: This lecture introduces the concept of momentum as the "quantity of motion" of a body and re-expresses Newton's Second Law in terms of momentum. It then extends this idea to systems of many particles, leading to the crucial principle of conservation of momentum, which is independent of the nature of internal forces and is fundamental for analyzing collisions, explosions, and impulse problems.
🗂️ Topics Covered
The lecture defines momentum and its relationship to Newton's Second Law, extends the concept to systems of multiple particles to derive conservation of momentum, and applies it to one-dimensional collisions. It then explores examples including explosions (equal and opposite fragments), projectile motion with an internal explosion, and the concept of impulse—force multiplied by time—including its graphical interpretation and practical implications for reducing impact force.
📝 Lecture Summary
1. Momentum
Momentum is defined as the "quantity of motion" possessed by a body. More precisely, it is: Mass of the body × Velocity of the body. The dimensions of momentum are MLT⁻¹ and the units are kg-m/s. Momentum is a vector quantity, having both magnitude and direction, represented as p = mv.
2. Relation between Momentum and Newton's Second Law
Newton's Second Law can be re-expressed in terms of momentum. Originally written as F = ma, this can be rewritten as: F = dp/dt In words, the rate of change of momentum of a body equals the total force acting upon it.
🔑 Definition — Momentum (p): p = mv (mass × velocity). 📐 Formula: F = dp/dt → The total external force on an object equals the time rate of change of its momentum. 📌 Example: If a constant force of 10 N acts for 2 seconds on a 5 kg object initially at rest, the change in momentum is Δp = FΔt = (10 N)(2 s) = 20 kg·m/s. The final velocity is Δp/m = 20/5 = 4 m/s.
3. Total Momentum of a System of Particles
When there are many particles, the total momentum P of the system is the vector sum of the momenta of all individual particles: P = p₁ + p₂ + ... + pN The rate of change of total momentum is equal to the total external force acting on the system: dP/dt = F_ext This result is independent of what sort of forces act between the bodies (electric, gravitational, etc.) or how complicated these forces are.
🔑 Definition — Total Momentum (P): The vector sum of the momenta of all particles in a system: P = Σ pᵢ. 📐 Formula: dP/dt = F_ext → The rate of change of total momentum equals the net external force. 💡 Why this matters: This means internal forces between particles in a system cancel out in pairs and do not change the total momentum.
4. Conservation of Total Momentum
If no external force acts on a system, its total momentum remains constant (conserved). This is known as the law of conservation of momentum. Even if forces act between the bodies (internal forces), the total momentum is conserved if the net external force is zero.
5. One-Dimensional Collision
Two balls move only along a straight line and collide. Initial momentum Pᵢ = m₁u₁ + m₂u₂ and final momentum P_f = m₁v₁ + m₂v₂. Since no external force acts on the balls during the collision, momentum is conserved; thus: Pᵢ = P_f, or m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂
📌 Example: A 2 kg ball moving at 4 m/s collides head-on with a 1 kg ball at rest. After collision, the 2 kg ball moves at 2 m/s. Find the velocity of the 1 kg ball. Initial momentum: Pᵢ = (2)(4) + (1)(0) = 8 kg·m/s Final momentum: P_f = (2)(2) + (1)(v₂) = 4 + v₂ By conservation: 4 + v₂ = 8 → v₂ = 4 m/s.
6. Explosion
Consider an object at rest that explodes into two fragments. Initial momentum Pᵢ = 0. Since no external forces act, final momentum P_f = 0. This gives m₁v₁ + m₂v₂ = 0, or m₁v₁ = -m₂v₂. The fragments fly apart with equal momentum but in opposite directions. The centre-of-mass stays at rest.
📌 Example: A 5 kg bomb at rest explodes into a 2 kg piece and a 3 kg piece. If the 2 kg piece flies to the right at 15 m/s, what is the velocity of the 3 kg piece? Conservation: m₁v₁ + m₂v₂ = 0 → (2)(15) + (3)(v₂) = 0 → 30 + 3v₂ = 0 → v₂ = -10 m/s (to the left).
7. Projectile Explosion Problem
A shell is fired from a cannon with speed 10 m/s at an angle 60° to the horizontal. At the highest point, it explodes into two equal-mass pieces. One piece retraces its path back to the cannon. Find the velocity of the other piece immediately after the explosion.
Solution:
- At highest point, vertical velocity = 0, horizontal velocity = 10 cos 60° = 5 m/s.
- Mass of shell = M, each fragment has mass M/2.
- Initial momentum just before explosion: Pₓ = M × 5 = 5M kg·m/s (horizontal).
- After explosion: One fragment retraces its path, so its horizontal velocity v₁ₓ = -5 m/s (same speed, opposite direction). Its momentum: (M/2)(-5) = -2.5M.
- Let the other fragment's horizontal velocity be v₂ₓ.
- Conservation of horizontal momentum: P_fₓ = Pᵢₓ
- (-2.5M) + (M/2)v₂ₓ = 5M → (M/2)v₂ₓ = 7.5M → v₂ₓ = 15 m/s.
- The second piece moves horizontally at 15 m/s.
8. Impulse
If a large force acts over a short time, a large change in momentum occurs. The impulse I is defined from Newton's Second Law: dp = F dt. Integrating over the time interval t₁ to t₂ gives: I = ∫ F dt = Δp = p_f - p_i In words, the change of momentum equals the impulse, which is the area under the curve of force versus time.
🔑 Definition — Impulse (I): The integral of force over time: I = ∫ F dt. It equals the change in momentum Δp. 📐 Formula: I = ∫ F dt = Δp → Impulse is the area under the F-t curve and equals the momentum change.
📌 Example: A 0.15 kg baseball is pitched at 40 m/s and hit back at 50 m/s. If the bat is in contact for 0.01 s, find the average force. Change in momentum: Δp = (0.15)(50 - (-40)) = (0.15)(90) = 13.5 kg·m/s. From I = F_avg Δt = Δp → F_avg = 13.5 / 0.01 = 1350 N.
9. Force from Impulse: Practical Implications
The average force is F = Δp / Δt. Extending the time (Δt) over which the momentum changes reduces the force. For example, wrapping your thumb with foam increases the collision time, reducing the peak force even though the impulse (Δp) is the same. Force is the rate of change of momentum: F = dp/dt.
💡 Why this matters: The same impulse (same change in momentum) can result in a much smaller peak force if the impact time is increased. This is the principle behind airbags, crumple zones in cars, and padding in sports equipment.
📌 Example: A hammer strikes a table. The F-t curve shows force rising from zero to a peak, then returning to zero. The area under this curve equals the impulse and the momentum change of the hammer.
⭐ Key Takeaways
- Momentum (p = mv) is a vector quantity, and Newton's Second Law can be written as F = dp/dt, where force equals the rate of change of momentum.
- Conservation of Momentum is a fundamental law: for any system with no net external force, total momentum P (the vector sum of all individual momenta) remains constant before and after collisions or explosions.
- Impulse (I = ∫F dt = Δp) equals the change in momentum and is given by the area under the Force vs. Time curve. The same impulse can result from a large force over a short time or a small force over a long time (F = Δp/Δt).
- In an explosion of an initially stationary object, fragments fly apart with equal and opposite momenta, so their velocities are inversely proportional to their masses (m₁v₁ = -m₂v₂).
- The center-of-mass of a system under no external forces remains at rest (or moves with constant velocity), even during internal collisions or explosions, because the total momentum of the system is conserved.
🧠 Quick Revision Questions
- State the law of conservation of momentum in words and write its mathematical form for a system of particles.
- A 1000 kg car moving at 20 m/s collides with and sticks to a 2000 kg truck at rest. What is their common velocity after the collision?
- A firecracker at rest explodes into three pieces. If two pieces of equal mass fly off perpendicular to each other at 10 m/s, what can be said about the velocity (magnitude and direction) of the third piece which has twice the mass of each of the first two? (Hint: Use conservation of momentum.)
- A 0.5 kg ball drops from a height of 10 m and rebounds to 6 m. If the contact time with the ground is 0.05 s, calculate the average force exerted by the ground on the ball. (Hint: First find velocities just before and after impact using kinematics.)
- Why does catching a fast-moving cricket ball "hurt" less if you move your hands backward with the ball, compared to keeping your hands stationary? Explain using the concept of impulse and force.
📘 Lecture 10 — COLLISIONS
📖 Overview: This lecture explores the physics of collisions, from everyday interactions like a bat hitting a ball to cosmic events like galaxies colliding. The core principle is that momentum is always conserved in any collision, but kinetic energy may or may not be, leading to the distinction between elastic and inelastic collisions. Understanding these concepts is crucial for analyzing a wide range of physical phenomena.
🗂️ Topics Covered
The lecture begins with the fundamental importance of collisions and the law of conservation of momentum. It then derives the equations for elastic collisions in 1D, introducing the concept that relative speed is conserved. Various special cases are examined, including equal masses, a heavy body at rest, a light body at rest, and a light body hitting a heavy target. The practical application of slowing neutrons in a reactor is discussed. Finally, the lecture covers completely inelastic collisions (using a ballistic pendulum example) and the treatment of collisions in 2D or 3D.
📝 Lecture Summary
1. Collisions are extremely important to understand
Collisions are ubiquitous, from electrons with atoms to cars with trucks and galaxies with galaxies. In every case, the sum of the initial momenta equals the sum of the final momenta.
🔑 Definition — Law of Conservation of Momentum: The total momentum of an isolated system (no external forces) remains constant before and after a collision.
2. Momentum conservation
For two bodies of mass (m_1) and (m_2) moving with velocities (u_1) and (u_2) before collision, and (v_1) and (v_2) after collision:
- Formula: (m_1 u_1 + m_2 u_2 = m_1 v_1 + m_2 v_2)
- This can be rewritten as: (m_1 (u_1 - v_1) = m_2 (v_2 - u_2))
- This is a single equation with two unknowns, so it is not enough to solve for the final velocities.
3. Elastic collisions
If the collision is elastic, kinetic energy is also conserved.
- Formula: (\frac{1}{2}m_1 u_1^2 + \frac{1}{2}m_2 u_2^2 = \frac{1}{2}m_1 v_1^2 + \frac{1}{2}m_2 v_2^2)
- Combining this with momentum conservation yields:
- (u_1 - v_1 = v_2 - u_2) or (u_1 + v_1 = u_2 + v_2)
🔑 Definition — Relative speed: The relative speed of the incoming particles equals the relative speed of the outgoing particles in an elastic collision ((u_1 - u_2 = v_2 - v_1)).
Solving for (v_1) and (v_2):
- Formula: (v_1 = \left( \frac{m_1 - m_2}{m_1 + m_2} \right) u_1 + \left( \frac{2m_2}{m_1 + m_2} \right) u_2)
- Formula: (v_2 = \left( \frac{2m_1}{m_1 + m_2} \right) u_1 + \left( \frac{m_2 - m_1}{m_1 + m_2} \right) u_2)
4. Equal masses
When (m_1 = m_2), the equations simplify drastically.
- Formula: (v_1 = u_2) and (v_2 = u_1)
- Meaning: The two bodies simply exchange their velocities after the collision.
5. Heavy target at rest
What if one body is much heavier and initially at rest? For (m_2 \gg m_1) and (u_2 = 0):
- Formula: (v_1 = -u_1) and (v_2 = 0)
- Meaning: The heavy body remains at rest, and the light body bounces back with the same speed.
6. Light target at rest
What if the lighter body is at rest and is hit by the heavier body? For (m_1 \gg m_2) and (u_2 = 0):
- Formula: (v_1 = u_1) and (v_2 = 2u_1)
- Meaning: The truck's (heavy body) speed is unaffected, but the rickshaw (light body) is thrust forward at twice the truck's speed.
7. Slowing down neutrons
This example shows how to slow down particles (e.g., neutrons in a nuclear reactor) by colliding them with other particles at rest.
- A neutron of mass (m_1) collides head-on with an atomic nucleus of mass (m_2) initially at rest.
- Formula: The fractional decrease in kinetic energy of the neutron is: [ \frac{K_i - K_f}{K_i} = \frac{4 m_1 m_2}{(m_1 + m_2)^2} ]
- Meaning: This formula provides the maximum energy transfer in a head-on elastic collision. This principle is used to moderate (slow down) neutrons in a nuclear reactor.
📌 Example: For a neutron ((m_1 \approx 1) amu) colliding with a carbon nucleus ((m_2 = 12) amu), the fractional decrease in energy is (\frac{4 \times 1 \times 12}{(1+12)^2} = \frac{48}{169} \approx 0.284). So about 28.4% of the neutron's kinetic energy is transferred to the carbon nucleus per head-on collision.
8. Completely inelastic collision (ballistic pendulum)
This is a classic problem where a bullet embeds itself in a block of wood.
- Setup: A bullet of mass (m) is fired into a block of mass (M) suspended as a pendulum. After the collision, the block+bullet swings up to a height (y).
- Solution:
- Momentum conservation (inelastic collision): (m v = (m+M) V), where (v) is the bullet's initial speed and (V) is the speed of the block+bullet right after the collision.
- Energy conservation (after collision): (\frac{1}{2} (m+M) V^2 = (m+M) g y), giving (V = \sqrt{2gy}).
- Final Formula: The initial speed of the bullet is: [ v = \frac{m+M}{m} \sqrt{2gy} ]
💡 Why this matters: This is a practical method for measuring the speed of a bullet without needing high-speed electronics.
9. Collisions in 2 or 3 dimensions
In higher dimensions, momentum conservation must be applied to each component separately.
- Formula: (\vec{P}_i = \vec{P}_f) is actually three separate equations:
- (p_{ix} = p_{fx})
- (p_{iy} = p_{fy})
- (p_{iz} = p_{fz})
- For an elastic collision in 2D/3D, there is only one extra equation from energy conservation, not three.
10. Energy in inelastic collisions
In an inelastic collision (e.g., a body breaking into 20 pieces), kinetic energy is not conserved.
- Meaning: The initial kinetic energy is used to do work against intermolecular forces, such as breaking bonds. The total energy is conserved, but some is converted into other forms (e.g., heat, sound, deformation energy), so kinetic energy is lost.
⭐ Key Takeaways
The most critical concept is that momentum is always conserved in any collision, regardless of whether it is elastic or inelastic. For elastic collisions, kinetic energy is also conserved, and the relative speed of approach equals the relative speed of separation; this provides a second equation to solve for final velocities. You must be able to apply the derived formulas for special cases (equal masses, heavy vs. light targets) for quick problem-solving. For completely inelastic collisions, objects stick together, and you solve by combining momentum conservation with energy conservation after the collision (e.g., the ballistic pendulum). In 2D or 3D collisions, treat the (x), (y), and (z) components of momentum separately, and add the energy conservation equation only if the collision is elastic.
🧠 Quick Revision Questions
- State the law of conservation of momentum for a two-body collision.
- Determine (v_1) and (v_2) for an elastic collision where (m_1 = m_2) and (u_1 = 5 , \text{m/s}), (u_2 = 0 , \text{m/s}).
- A (10 , \text{kg}) ball moving at (20 , \text{m/s}) hits a (1 , \text{kg}) ball at rest in an elastic collision. What is the speed of the lighter ball after the collision?
- In the ballistic pendulum setup, a bullet of mass (10 , \text{g}) embeds in a (2 , \text{kg}) block that rises to a height of (0.5 , \text{m}). What was the bullet's initial speed? (Take (g = 10 , \text{m/s}^2))
- How many conservation equations do you have for a 2D elastic collision, and what are they?
📘 Lecture 11 — ROTATIONAL KINEMATICS
📖 Overview: This lecture introduces rotational kinematics, the description of motion for objects rotating about a fixed axis. It establishes the fundamental angular quantities—displacement, velocity, and acceleration—and their relationships to linear quantities, providing the mathematical framework for analyzing circular motion. This matters because rotational motion is ubiquitous in physics, from planetary orbits to machinery and vehicle engines.
🗂️ Topics Covered
The lecture covers the definition and measurement of angular displacement in radians, the relationship between arc length and angular displacement, average and instantaneous angular speed, angular acceleration, the derivation of tangential velocity and acceleration from angular quantities, a comparison of constant linear and angular acceleration formulas, and detailed problem-solving applications including centripetal acceleration. It concludes with an introduction to vector cross products and their properties.
📝 Lecture Summary
Summary of Lecture 11 – ROTATIONAL KINEMATICS
1. Any rotation is specified by giving two pieces of information: a) The point about which the rotation occurs, i.e. the origin. b) The angle of rotation is denoted by φ and is measured in radians. The maximum value of φ is 2π radians, which corresponds to 360 degrees or one full revolution. 🔑 Definition — 1 radian: 57.3° or 0.159 revolution.
2. The arc length = radius × angular displacement, or s = rφ. From this, it follows that if φ = 2π, then s = 2πr which is the total circumference.
3. Suppose that there is a particle located at the tip of the radius vector. Now we wish to describe its motion of the particle, i.e. as it goes around the circle. So, suppose that the particle moves from angle φ₁ to φ₂ in time t₂ − t₁. Then, the average angular speed ω is defined as: ω = (φ₂ − φ₁) / (t₂ − t₁) = Δφ / Δt Suppose that we look at ω over a very short time. Then: ω = lim(Δt→0) Δφ/Δt = dφ/dt is called the instantaneous angular speed.
4. To familiarize ourselves with the notion of angular speed, let us compute ω for a clock’s second, minute and hour hands:
- ω_second = 2π / 60 = 0.105 rad/s
- ω_minute = 2π / (60 × 60) = 1.75 × 10⁻³ rad/s
- ω_hour = 2π / (60 × 60 × 12) = 1.45 × 10⁻⁴ rad/s
5. Just as we defined acceleration for linear motion, we also define acceleration for circular motion: α ≡ (ω₂ − ω₁) / (t₂ − t₁) = Δω / Δt (average angular speed) Hence, α = lim(Δt→0) Δω/Δt = dω/dt = d²φ/dt² (angular acceleration). Now use s = rφ. Differentiate with respect to time t: ds/dt = r(dφ/dt). The rate of change of arc length s is clearly what we should call the circular speed, v. So v = rω. Since r is held fixed, it follows that dv/dt = r(dω/dt). Now define a_T = dv/dt. Obviously, a_T = rα. Here T stands for tangential, i.e. in the direction of increasing s.
6. Compare the formulae for constant linear and angular accelerations:
| LINEAR | ANGULAR |
|---|---|
| v = v₀ + at | ω = ω₀ + αt |
| x = x₀ + v₀t + ½at² | φ = φ₀ + ω₀t + ½αt² |
| v² = v₀² + 2a(x − x₀) | ω² = ω₀² + 2α(φ − φ₀) |
💡 Why this matters: The formulae are nearly identical even though they describe two totally different physical situations. Answer: because the mathematics is identical!
7. Problem: The angular speed of a car engine is increased from 1170 rev/min to 2880 rev/min in 12.6 s. a) Find the average angular acceleration in rev/min². b) How many revolutions does the engine make during this time? Solution: α = (ω_f − ω_i) / t = (2880 − 1170) / (12.6/60) = 8140 rev/min² φ = ω_i t + ½αt² = 1170 × (12.6/60) + ½ × 8140 × (12.6/60)² = 425 rev.
8. Wheel A of radius r_A = 10.0 cm is coupled by a chain B to wheel C of radius r_C = 25.0 cm. Wheel A increases its angular speed from rest at a uniform rate of 1.60 rad/s². Determine the time for wheel C to reach a rotational speed of 100 rev/min. Solution: Every part of the chain moves with the same speed, so v_A = v_C. Hence r_A ω_A = r_C ω_C ⇒ ω_A = (r_C / r_A) ω_C = (25.0/10.0) × 100 rev/min = 250 rev/min. Converting: ω_A = 250 × (2π/60) = 26.18 rad/s. Using ω = ω₀ + αt: t = (ω_A − 0) / α = 26.18 / 1.60 = 16.4 s.
9. Imagine a disc going around. All particles on the disc will have same 'ω' and 'α' but different 'v' and 'a'. Clearly 'ω' and 'α' are simpler choices!
10. Now consider a particle going around a circle at constant speed. You might think that constant speed means no acceleration. But this is wrong! It is changing its direction and accelerating. This is called "centripetal acceleration", meaning acceleration directed towards the centre of the circle. Note that the distance between points P₁ and P₂ is Δr = vΔt ≈ rθ. Similarly, Δv ≈ vθ ⇒ a = Δv/Δt ≈ vθ / (rθ/v) = v²/r. More generally, a = v²/r. In vector form: →a = −(v²/r) r̂. The negative sign indicates that the acceleration is towards the centre.
12. Vector Cross Products: The vector cross product of two vectors is defined as: →A × →B = AB sinθ n̂ where n̂ is a unit vector that is perpendicular to both A and B. Apply this definition to unit vectors in 3-dimensions: î × ĵ = k̂, k̂ × î = ĵ, ĵ × k̂ = î.
13. Some key properties of the cross product:
- A × B = −B × A
- A × A = 0
- A × (B + C) = A × B + A × C 🔑 Formula: A × B = (A_y B_z − A_z B_y)î + (A_z B_x − A_x B_z)ĵ + (A_x B_y − A_y B_x)k̂
14. The cross product is only definable in 3 dimensions and has no meaning in 2-d. This is unlike the dot product which has a meaning in any number of dimensions.
⭐ Key Takeaways
Rotational kinematics is mathematically analogous to linear kinematics, with angular displacement φ, angular velocity ω, and angular acceleration α replacing their linear counterparts x, v, and a, and the same constant-acceleration formulas apply. The fundamental relationship between linear and angular quantities is v = rω and a_T = rα, enabling the conversion between rotational and translational motion. A crucial insight is that even uniform circular motion involves acceleration—centripetal acceleration a = v²/r directed toward the center—because the velocity direction changes continuously. The vector cross product, defined as A × B = AB sinθ n̂, is essential for describing rotational quantities in three dimensions and obeys specific algebraic properties including anti-commutativity. Remember that all points on a rotating rigid body share the same ω and α but not the same v and a.
🧠 Quick Revision Questions
- What is the relationship between arc length s, radius r, and angular displacement φ?
- Derive the formulas for tangential velocity and tangential acceleration in terms of angular quantities.
- A wheel accelerates uniformly from rest to 10 rad/s in 5 seconds. How many radians does it turn?
- Why does a particle moving in a circle at constant speed still have acceleration? What is its magnitude and direction?
- Compute the cross product A × B if A = (2, 1, 0) and B = (0, 3, 1).
📘 Lecture 12 — PHYSICS OF MANY PARTICLES
📖 Overview: This lecture extends Newtonian mechanics from single particles to systems of many particles. It introduces the concept of the center of mass, showing how it simplifies the description of motion for entire collections of particles, and then develops the rotational motion of rigid bodies, culminating in the rotational analogue of Newton's Second Law.
🗂️ Topics Covered
The lecture defines the center of mass for two and N particles, shows how to calculate its position for symmetrical and discrete objects, and derives Newton's Second Law for a collection of particles. It then introduces the moment of inertia, defines torque, derives the rotational work-energy theorem, and concludes with a comparison of linear and rotational motion, including the separation of kinetic energy into translational and rotational components.
📝 Lecture Summary
Physics of Many Particles
A body is made of a collection of particles. We can think of this body as having a "centre." For two masses, the centre of mass is defined as a vector position that represents the average location of the total mass. In two dimensions, this is expressed by two equations that give the coordinates of the centre of mass of the two-particle system.
🔑 Definition — Centre of Mass (for two masses): The point representing the mean position of the matter in a body, given by (\vec{r}_{cm} = \frac{m_1 \vec{r}1 + m_2 \vec{r}2}{m_1 + m_2}). In components, (x{cm} = \frac{m_1 x_1 + m_2 x_2}{m_1 + m_2}) and (y{cm} = \frac{m_1 y_1 + m_2 y_2}{m_1 + m_2}).
📌 Example: One mass is placed at (x = 2\text{ cm}) and a second mass, equal to the first, is placed at (x = 6\text{ cm}). The cm position lies halfway between the two: (x_{cm} = \frac{mx_1 + mx_2}{m + m} = \frac{2m + 6m}{2m} = 4\text{ cm}). Note that there is no physical body actually located at (x_{cm} = 4\text{ cm})! The centre of mass can be a point where there is no matter. If the first mass is three times bigger than the second: (x_{cm} = \frac{(3m)x_1 + mx_2}{3m + m} = \frac{2(3m) + 6m}{4m} = 3\text{ cm}). This shows that the cm lies closer to the heavier body. 💡 Why this matters: The centre of mass is a weighted average, meaning heavier masses have a greater "pull" on its location.
Centre of Mass for N Masses and Newton's Second Law
For N masses, the centre of mass position is the obvious generalization. In words, it says: choose any origin and draw vectors (\vec{r}_1, \vec{r}_2, ... \vec{r}_N) that connect to the masses (m_1, m_2, ... m_N). Heavier masses get more importance in the sum. So if (m_2) is much larger than any of the others, the cm is very close to the position vector of (m_2). For symmetrical objects like a sphere or circle, the cm lies at the centre; for a cylinder it is on the axis halfway between the two faces.
The definition of the cm allows Newton's Second Law to be written for an entire collection of particles. The total external force (\vec{F}{ext}) on the system equals the total mass (M) times the acceleration of the centre of mass (\vec{a}{cm}). This is because the sum of internal forces (\vec{F}{int}) cancel out due to Newton's Third Law ((\vec{F}{12} + \vec{F}_{21} = 0)).
🔑 Definition — Centre of Mass (for N masses): (\vec{r}_{cm} \equiv \frac{1}{M} \sum_i m_i \vec{r}_i), where (M = \sum_i m_i).
📐 Formula: (\vec{v}{cm} = \frac{d\vec{r}{cm}}{dt} = \frac{1}{M} \sum_i m_i \vec{v}i) and (\vec{a}{cm} = \frac{d\vec{v}{cm}}{dt} = \frac{1}{M} \sum_i m_i \vec{a}i). Newton's Second Law for a system of particles is: (\sum \vec{F}{ext} = M \vec{a}{cm}).
Rotational Kinetic Energy and Moment of Inertia
Now consider rotational motion for a rigid system of N particles. Rigid means that all particles have a fixed distance from the origin. The kinetic energy is (K = \frac{1}{2} m_1 v_1^2 + \frac{1}{2} m_2 v_2^2 + ...). Since (v_i = r_i \omega), this becomes (K = \frac{1}{2} (\sum_i m_i r_i^2) \omega^2). If we define the moment of inertia (I \equiv \sum_i m_i r_i^2), then the kinetic energy is (K = \frac{1}{2} I \omega^2). This is analogous to (K = \frac{1}{2} M v^2) for linear motion.
📐 Formula: Rotational Kinetic Energy: (K = \frac{1}{2} I \omega^2), where Moment of Inertia (I = \sum_i m_i r_i^2).
📌 Example: Two particles (m_1) and (m_2) are connected by a light rigid rod of length (L). Neglecting the mass of the rod, the rotational inertia (I) about an axis perpendicular to the rod and at a distance (x) from (m_1) is (I = m_1 x^2 + m_2 (L - x)^2). To find the value of (x) for which (I) is largest, calculate (\frac{dI}{dx} = 0): (\frac{dI}{dx} = 2m_1 x - 2m_2 (L - x) = 0 \implies x_{max} = \frac{m_2 L}{m_1 + m_2}).
Continuous Mass Distributions
Although matter is made up of discrete atoms, it is useful to think of matter as being continuously distributed. Since a sum (\sum) becomes an integral (\int), the definitions for moment of inertia and centre of mass become:
- (I = \int r^2 dm)
- (\vec{R}_{cm} = \frac{1}{M} \int \vec{r} dm)
📌 Example (Hoop): A hoop with mass distributed uniformly over it. The moment of inertia is (I = \int r^2 dm = R^2 \int dm = MR^2).
📌 Example (Solid Plate): For a solid plate, (I = \int r^2 dm), where (dm = 2\pi r dr \rho_0). The integral becomes (I = \frac{1}{2} (\pi R^2 \rho_0) R^2 = \frac{1}{2} M R^2).
Torque and Rotational Work
It is easier to turn things when the applied force acts at a greater distance. This is because torque (\vec{\tau} = \vec{r} \times \vec{F}). The magnitude of torque is (\tau = r F \sin \theta), where (\theta) is the angle between the radius vector and the force.
When a force (\vec{F}) acts through a distance (d\vec{s}), it does work (dW = \vec{F} \cdot d\vec{s}). For rotational motion, the small amount of work done by a torque is (dW = \tau d\phi). The net work done by all particles is (dW_{net} = (\sum \tau_{ext}) d\phi = (\sum \tau_{ext}) \omega dt). The change in kinetic energy is (dK = I \omega d\omega = (I \alpha) \omega dt). By conservation of energy, (dW_{net} = dK), which leads to the rotational analogue of Newton's Second Law: (\sum \tau_{ext} = I \alpha).
🔑 Definition — Torque: A measure of the force that can cause an object to rotate about an axis. (\vec{\tau} = \vec{r} \times \vec{F}).
📐 Formula: Rotational Work-Energy Theorem leads to (\sum \tau_{ext} = I \alpha).
Comparison of Linear and Rotational Motion
| LINEAR | ROTATIONAL |
|---|---|
| (x, M) | (\phi, I) |
| (v = \frac{dx}{dt}) | (\omega = \frac{d\phi}{dt}) |
| (a = \frac{dv}{dt}) | (\alpha = \frac{d\omega}{dt}) |
| (F = Ma) | (\tau = I \alpha) |
| (K = \frac{1}{2} M v^2) | (K = \frac{1}{2} I \omega^2) |
| (W = \int F dx) | (W = \int \tau d\phi) |
Total Kinetic Energy of a Rolling Object
Rotational and translational motion can occur simultaneously, like a car's wheel rotating and translating. The total kinetic energy is the sum of the energies of the two motions: (K = \frac{1}{2} M v_{cm}^2 + \frac{1}{2} I \omega^2). For a system of N particles, the total kinetic energy divides up neatly into the kinetic energy of rotation and translation. This can be derived by writing the velocity of each particle as (\vec{v}i = \vec{v}{cm} + \vec{v}_i'), where (\vec{v}i') is the velocity of a particle with respect to the cm frame. The cross term (\vec{v}{cm} \cdot \sum m_i \vec{v}_i') is zero because the total momentum is zero in the cm frame.
📐 Formula: (K = \frac{1}{2} M v_{cm}^2 + \frac{1}{2} I \omega^2).
⭐ Key Takeaways
The centre of mass is a powerful concept that allows us to treat the motion of an entire system as if all its mass were concentrated at a single point, with the net external force applied there. The moment of inertia is the rotational analogue of mass, quantifying an object's resistance to changes in rotational motion. Torque is the rotational analogue of force, and the equation (\tau_{net} = I \alpha) is the rotational analogue of Newton's Second Law. The total kinetic energy of a rolling or moving rigid body can be cleanly separated into translational energy of the centre of mass and rotational energy about the centre of mass. For any collection of particles, the total kinetic energy is the sum of the kinetic energy of the centre of mass and the kinetic energy of motion relative to the centre of mass.
🧠 Quick Revision Questions
- Define the center of mass for a two-particle system. How does the position of the centre of mass shift if one mass is much larger than the other?
- Write Newton's Second Law for a collection of particles. Why do internal forces not appear in this equation?
- What is the moment of inertia? How does it relate to rotational kinetic energy? Calculate the moment of inertia of a thin hoop of mass M and radius R about its centre.
- Define torque. What is the rotational analogue of Newton's Second Law, and how is it derived from the work-energy theorem?
- A solid sphere is rolling without slipping on a flat surface. How is its total kinetic energy expressed? Explain the origin of both terms.
📘 Lecture 13 — ANGULAR MOMENTUM
📖 Overview: This lecture introduces the concept of angular momentum, beginning with its definition and calculation using a projectile as an example. It then establishes the fundamental relationship between torque and the rate of change of angular momentum, applying these principles to explain the precession of a spinning top and the conservation of angular momentum in a system of particles.
🗂️ Topics Covered
The lecture covers the definition and various forms of angular momentum; calculating angular momentum for a projectile; deriving the relationship between torque and the rate of change of angular momentum; applying this to explain the precession of a spinning top; extending the concept to a system of particles and showing that internal torques cancel; applying conservation of angular momentum; and contrasting linear and rotational motion equations.
📝 Lecture Summary
1. Recall the definition of angular momentum:
The angular momentum L of a particle is defined as L = r × p. The magnitude can be expressed in several equivalent ways: (a) L = rp sinθ (b) L = r(p sinθ) = r p⟂ (c) L = p(r sinθ) = p r⟂
🔑 Definition — Angular Momentum: A vector quantity representing the rotational analog of linear momentum, defined as the cross product of the position vector (r) and the linear momentum vector (p).
2. Angular Momentum of a Projectile
We can calculate the angular momentum of a projectile thrown from the ground at an angle θ. The initial angular momentum is zero because the position vector r is zero.
The projectile's coordinates at time t after launch are: x = (v₀ cosθ) t, y = (v₀ sinθ) t - ½ g t²
The velocity components are: vₓ = v₀ cosθ, vᵧ = v₀ sinθ - g t
Hence, L⃗ = r⃗ × p⃗ = (x î + y ĵ) × (vₓ î + vᵧ ĵ) m = m (x vᵧ - y vₓ) k̂ = m [ (v₀ cosθ t)(v₀ sinθ - g t) - (v₀ sinθ t - ½ g t²)(v₀ cosθ) ] k̂ = - ½ m g t² v₀ cosθ k̂
📌 Example: For a projectile, the angular momentum increases as t².
3. Relation between Torque and Rate of Change of L
The lecture establishes that τ = dL/dt. Just as a particle's momentum changes with time because of a force, a particle's angular momentum changes with time because of a torque.
The derivation starts with: ΔL = L(t + Δt) - L(t) = (r + Δr) × (p + Δp) - r × p = r × Δp + Δr × p (ignoring second-order term Δr × Δp)
Dividing by Δt and taking the limit as Δt → 0: dL/dt = r × (dp/dt) + (dr/dt) × p = r × F + v × p
Since v × p = v × (m v) = 0, the final fundamental equation is: dL/dt = τ
🔑 Definition — Torque (τ): The rotational analog of force, defined as τ = r × F, which causes a change in angular momentum.
📐 Formula: dL/dt = τ → The time rate of change of angular momentum of a particle equals the net torque acting on it.
4. The Spinning Top
The spinning top is an excellent application of torque and angular momentum. The torque due to gravity (τ = r × F) is perpendicular to L. Since τ = dL/dt, torque can only change the direction of L, not its magnitude.
The precession speed ω (the rate at which the axis of the top rotates) is given by: ω = Mgr / L
As the top slows down due to friction, L decreases, and the top precesses faster and faster.
🔑 Definition — Precession: The slow, conical rotation of the axis of a spinning object, such as a top, due to an external torque.
📐 Formula: ω = Mgr / L → The precession speed equals the torque due to gravity divided by the angular momentum of the spinning top.
5. Torque on a System of Particles
The torque on a system of particles can come from both external and internal forces. However, if internal forces between particles are equal, opposite, and directed along the line joining them, the total internal torque is zero.
For two particles: ∑ τ_int = τ₁ + τ₂ = r₁ × F₁₂ + r₂ × F₂₁ Since F₂₁ = -F₁₂ = F₁₂ r̂, then ∑ τ_int = (r₁ - r₂) × (F₁₂ r̂) = r₁₂ × (F₁₂ r̂) = 0
Thus, the net external torque acting on a system of particles equals the time rate of change of the total angular momentum of the system: ∑ τ_ext = dL_total/dt.
📐 Formula: ∑ τ_int = 0 → Internal torques cancel out, so only external torques change the total angular momentum of a system.
6. Conservation of Angular Momentum
It follows from ∑ τ_ext = dL/dt that if no net external torque acts on a system, then the total angular momentum is constant.
📐 Formula: ∑ τ_ext = 0 → L = constant (Conservation of Angular Momentum)
📌 Example: When two stationary discs, each with ½ MR², fall on top of a rotating disc, the total angular momentum is unchanged. I_i ω_i = I_f ω_f If the initial moment of inertia is I_i = ½ MR² and the final moment of inertia is I_f = ½ MR² + 2(½ MR²) = (3/2) MR², then: ω_f = ω_i (I_i / I_f) = ω_i (½ MR² / (3/2) MR²) = ω_i / 3
7. Similarities and Differences
Linear momentum: F = dp/dt, p = m v Rotational momentum: τ = dL/dt, L = I ω
Key difference: For linear momentum p, the origin does not matter. But L depends on the choice of origin. If you shift the origin by vector c, the new angular momentum L' is related to the old L by: L' = r' × p = (c + r) × p = c × p + L
8. Linear and Angular Acceleration
The derivative of velocity v = ω × r gives acceleration: a = dv/dt = d(ω × r)/dt = (dω/dt) × r + ω × (dr/dt) = α × r + ω × v
So the acceleration has a tangential part (a_T = α × r) and a radial part (a_R = ω × v).
⭐ Key Takeaways
The most critical takeaway is that torque is the rotational equivalent of force, causing a change in angular momentum via the fundamental equation τ = dL/dt. Key applications include the conservation of angular momentum (when net external torque is zero) which is used to solve problems like objects falling on a rotating disc, and the precession of a spinning top where a torque perpendicular to L changes its direction, not magnitude. Internal torques cancel in a system of particles, meaning only external torques can alter the total angular momentum. Finally, while linear and rotational motion equations are analogous, angular momentum is origin-dependent, unlike linear momentum.
🧠 Quick Revision Questions
- What is the definition of angular momentum L of a particle, and what are three equivalent ways to write its magnitude?
- Derive the relationship between torque and angular momentum. What does this equation imply about the effect of torque on angular momentum?
- Using conservation of angular momentum, if a rotating disc with moment of inertia I and angular speed ω has two additional stationary discs dropped onto it, what is the final angular speed?
- Explain why the axis of a spinning top precesses rather than falls over. How does the precession speed change as the top's spin slows down?
- Why does the total internal torque on a system of particles equal zero? What does this imply about the net torque that can change the system's total angular momentum?
📘 Lecture 14 — EQUILIBRIUM OF RIGID BODIES
📖 Overview: This lecture introduces the conditions for mechanical equilibrium of rigid bodies, covering both translational and rotational equilibrium. It explains how to analyze static systems using force and torque balance, with practical applications including beam supports, balance problems, and finding the center of gravity.
🗂️ Topics Covered
Definition of rigid bodies and mechanical equilibrium conditions; translational and rotational equilibrium equations; static equilibrium analysis of beams on supports; torque independence of origin choice for equilibrium bodies; balance problems and center of gravity; finding center of gravity by suspension; non-uniform bar equilibrium with cords; rod leaning without slipping; stable, unstable, and neutral equilibrium types.