π Lecture 20 β WAVE MOTION
π Overview: This lecture explores the fundamental principles of wave motion, which is any self-repeating periodic motion that transports energy from one point to another. It covers the classification of waves, their mathematical representation, the concept of phase, and how waves superpose and interfere. Understanding wave motion is crucial because it explains phenomena from sound and light to earthquakes.
ποΈ Topics Covered
The lecture begins by defining and classifying wave motion into longitudinal and transverse waves, emphasizing that waves transport energy without transporting matter. It then explains amplitude and its relation to power, including the inverse square law for spherical waves. The mathematical representation of a wave with a phase constant is introduced, followed by a detailed analysis of interference from two sources. The formula for the speed of sound in a medium is stated, and finally, the concept of a pulse and its propagation speed (phase velocity) is derived.
π Lecture Summary
1. Wave Motion
Wave motion is any kind of self-repeating (periodic, or oscillatory) motion that transports energy from one point to another. Waves are of two basic kinds:
- Longitudinal Waves: the oscillation is parallel to the direction of wave travel. Examples: sound, spring, "P-type" earthquake waves.
- Transverse Waves: the oscillation is perpendicular to the direction of wave travel. Examples: radio or light waves, string, "S-type" earthquake waves.
2. Waves Transport Energy, Not Matter
Taking the vibration of a string as an example, each segment of the string stays in the same place, but the work done on the string at one end is transmitted to the other end. Work is done in lifting the mass at the other end. π‘ Why this matters: This fundamental principle distinguishes wave motion from the bulk motion of matter.
3. Amplitude and Power
The height of a wave is called the amplitude. The average power (or intensity) in a wave is proportional to the square of the amplitude. So if ( a(t) = a_0 \sin(\omega t - kx) ) is a wave of some kind, then ( a_0 ) is the amplitude and ( I \propto a_0^2 ).
4. Spherical Waves and the Inverse Square Law
A sound source placed at the origin will radiate sound waves in all directions equally. These are called spherical waves. For spherical waves, the amplitude ( \propto \frac{1}{r} ) and so the power ( \propto \frac{1}{r^2} ).
Consider a source of sound and draw two spheres. Let ( P_1 ) be the total radiated power and ( I_1 ) the intensity at ( r_1 ), etc. All the power (and energy) that crosses ( r_1 ) also crosses ( r_2 ) since none is lost in between. We have that, ( 4 \pi r_1^2 I_1 = P_1 ) and ( 4 \pi r_2^2 I_2 = P_2 ). But ( P_1 = P_2 = P ), and so ( \frac{I_1}{I_2} = \frac{r_2^2}{r_1^2} ) or ( I \propto \frac{1}{r^2} ).
π Definition β Spherical Waves: Waves that radiate outwards equally in all directions from a point source.
π Formula: ( \frac{I_1}{I_2} = \frac{r_2^2}{r_1^2} ) β The intensity of a spherical wave is inversely proportional to the square of the distance from the source.
5. The Phase Constant
We have encountered waves of the kind ( y(x,t) = y_0 \sin(kx - \omega t) ) in the previous lecture. Obviously ( y(0,0) = 0 ). But what if the wave is not zero at ( x = 0, t = 0 )? Then it could be represented by ( y(x,t) = y_m \sin(kx - \omega t - \phi) ), where ( kx - \omega t - \phi ) is called the phase and ( \phi ) is called the phase constant.
Note that you can rewrite ( y(x,t) ) either as: a) ( y(x,t) = y_m \sin \left[ k \left( x - \frac{\phi}{k} \right) - \omega t \right] ), or as b) ( y(x,t) = y_m \sin \left[ kx - \omega \left( t + \frac{\phi}{\omega} \right) \right] ).
The two different ways of writing the same expression can be interpreted differently. In (a) ( x ) has effectively been shifted to ( x - \frac{\phi}{k} ) whereas in (b) ( t ) has been shifted to ( t + \frac{\phi}{\omega} ). So the phase constant only moves the wave forward or backward in space or time.
6. Interference of Two Waves
When two sources are present, the total amplitude at any point is the sum of the two separate amplitudes, ( y(x,t) = y_1(x,t) + y_2(x,t) ). The power is proportional to the square of the amplitude, so ( P \propto (y_1 + y_2)^2 ). This is why interference happens. Suppose the two waves have equal amplitude. Let the two waves be: ( y_1(x,t) = y_m \sin(kx - \omega t - \phi_1) ) and ( y_2(x,t) = y_m \sin(kx - \omega t - \phi_2) )
The total amplitude is: ( y(x,t) = y_1(x,t) + y_2(x,t) ) ( = y_m \left[ \sin(kx - \omega t - \phi_1) + \sin(kx - \omega t - \phi_2) \right] )
Using the trigonometric formula, ( \sin B + \sin C = 2 \sin \frac{1}{2} (B+C) \times \cos \frac{1}{2} (B-C) ), we get: ( y(x,t) = \left[ 2 y_m \cos \left( \frac{\Delta \phi}{2} \right) \right] \times \sin(kx - \omega t - \phi') )
Here ( \Delta \phi = \phi_2 - \phi_1 ) is the difference of phases, and ( \phi' = \frac{\phi_1 + \phi_2}{2} ) is the sum.
So what we learn from this? That if ( \phi_2 = \phi_1 ), then the two waves are in phase and the resultant amplitude is maximum (because ( \cos 0 = 1 )). And that if ( \phi_2 = \phi_1 + \pi ), then the two waves are out of phase and the resultant amplitude is minimum (because ( \cos \pi/2 = 0 )). The two waves have interfered with each other and have increased/decreased their amplitude in these two extreme cases. In general, ( \cos \left( \frac{\Delta \phi}{2} \right) ) will be some number that lies between -1 and +1.
π Definition β Interference: The phenomenon that occurs when two or more waves overlap, resulting in a new wave pattern with an amplitude that is the sum of the individual amplitudes.
7. Speed of Sound in a Medium
The speed of sound in a medium is given by the formula: ( v = \sqrt{\frac{B}{\rho}} ), where ( B ) is the bulk modulus and ( \rho ) is the density of the medium.
π Formula: ( v = \sqrt{\frac{B}{\rho}} ) β The speed of sound increases with the stiffness (bulk modulus) of the medium and decreases with its density.
8. Speed of a Pulse
A pulse is a burst of energy (sound, electromagnetic, heat, ...) and could have any shape. Mathematically any pulse has the form ( y(x,t) = f(x - vt) ). Here ( f ) is any function (e.g., sin, cos, exp, ...). Note that at time ( t=0 ), ( y(x,0) = f(x) ) and the shape would look as on the left in the diagram below. At a late time ( t ), it will look just the same, but shifted to the right. In other words, at time ( t ), ( y(x,t) = f(x') ) where ( x' = x - vt ).
Fix your attention on any one point of the curve and follow it as the pulse moves to the right. From ( x - vt = \text{constant} ) it follows that ( \frac{dx}{dt} - v = 0 ), or ( v = \frac{dx}{dt} ). This is called the phase velocity because we derived it using the constancy of phase.
π Definition β Pulse: A single, non-repeating disturbance that travels through a medium.
π Formula: ( v = \frac{dx}{dt} ) β The speed of a wave pulse is the rate at which a fixed point of constant phase moves.
β Key Takeaways
Wave motion is the transfer of energy through a medium without the net transfer of matter, classified into longitudinal and transverse waves based on the direction of oscillation relative to wave travel. The intensity or power of a wave is proportional to the square of its amplitude, and for spherical waves, this intensity follows an inverse square law with distance from the source. A wave can be represented by a sinusoidal function containing a phase constant, which simply shifts the wave in space or time. When two waves overlap, they undergo interference, with the resultant amplitude determined by the phase difference between them: maximum for waves in phase and minimum for waves out of phase. The speed of any waveform, whether a continuous wave or a single pulse, is given by the phase velocity, ( v = \frac{dx}{dt} ), derived from the condition of constant phase.
π§ Quick Revision Questions
- What are the two basic categories of waves, and how do the oscillations differ relative to the direction of wave travel?
- State the relationship between the amplitude of a wave and its average power or intensity.
- For spherical waves radiating from a point source, how does the intensity change as the distance from the source is doubled?
- What is the condition on the phase difference ((\Delta \phi)) for two waves of equal amplitude to exhibit fully constructive interference?
- Write the mathematical form of a wave pulse traveling in the positive x-direction and derive an expression for its speed.
π Lecture 21 β GRAVITY
π Overview: This lecture covers the fundamental law of universal gravitation, including Newton's formulation, experimental determination of the gravitational constant G, and its application to Earth's mass and density. It also explores gravitational potential energy, escape velocity, satellite orbits, and Kepler's laws of planetary motion.
ποΈ Topics Covered
Newton's law of universal gravitation and the direction of gravitational forces; experimental determination of G using the Cavendish torsion balance; calculation of Earth's mass, gravity, and density; gravitational potential and potential energy; escape velocity from Earth and other bodies; satellite circular orbit conditions, orbital velocity, and period; total energy of orbiting satellites; Kepler's equal area law derived from angular momentum conservation.
π Lecture Summary
1. Newton's Law of Universal Gravitation
Newton's law of universal gravitation states that the force of attraction between two masses mβ and mβ is proportional to the product of their masses and inversely proportional to the square of the distance between them. Putting in a constant of proportionality, F = G (mβmβ)/rΒ². The force is directed along the line joining the two bodies. Looking at the diagram, Fββ = Force on mβ by mβ, and Fββ = Force on mβ by mβ. By Newton's Third Law, Fββ = -Fββ.
2. The Gravitational Constant G
The gravitational constant G is a very small quantity and needs a very sensitive experiment. An early experiment to find G involved suspending two masses and measuring the deflection. A thread provides the restoring torque ΞΊΞΈ. From the figure you can see that the gravitational torque is 2(GmM/rΒ²)L. The deflection ΞΈ can be measured by observing the beam of the light reflected from the small mirror. In equilibrium the torques balance, (GmM/rΒ²)L = ΞΊΞΈ. Hence G = (ΞΊΞΈ rΒ²)/(GmML). How is ΞΊ found? It can be found from observing the period of free oscillations, T = 2Οβ(I/ΞΊ) β ΞΊ = (4ΟΒ²I)/TΒ² with I = (mLΒ²)/2.
π Definition β Gravitational Constant G: The proportionality constant in Newton's law of universal gravitation. The modern value is G = 6.67259 Γ 10β»ΒΉΒΉ NΒ·mΒ²/kgΒ².
3. Earth's Gravity and Mass
The magnitude of the force with which the Earth attracts a body of mass m towards its centre is F = GmMβ/RβΒ², where Rβ = 6400 km is the radius of the Earth and Mβ is the mass. The material does not matter β iron, wood, leather, etc. all feel the force in proportion to their masses. If the body can fall freely, then it will accelerate. So, F = mg = GmMβ/RβΒ². We measure g, the acceleration due to gravity, as 9.8 m/sΒ². From this we can immediately deduce Earth's mass: Mβ = gRβΒ²/G = 5.97 Γ 10Β²β΄ kg. What a remarkable achievement! The volume of the Earth is Vβ = (4/3)ΟRβΒ³ = 1.08 Γ 10Β²ΒΉ mΒ³. Hence the density of the Earth is Οβ = Mβ/Vβ = 5462 kg/mΒ³. So this is 5.462 times greater than the density of water and tells us that the Earth must be quite dense inside.
π Formula: g = GMβ/RβΒ² β The acceleration due to gravity at Earth's surface equals the gravitational constant times Earth's mass divided by the square of Earth's radius.
4. Gravitational Potential
The gravitational potential is an important quantity. It is the work done in moving a unit mass from infinity to a given point R, and equals V(r) = -GM/R. Proof: Conservation of energy says dV = -Fdr β β«dV = -β«F(r)dr. Integrate both sides: 0 - V(R) = GMβ«(1/rΒ²)dr from R to β = -GM[1/r] from R to β = -GM(0 - 1/R) = GM/R. Therefore, V(R) = -GM/R.
5. Change in Potential Energy Near Earth's Surface
Using the above formula, let us calculate the change in potential energy ΞU when we raise a body of mass m to a height h above the Earth's surface. ΞU = GMm(1/Rβ - 1/(Rβ + h)) = GMm(1 - (1 + h/Rβ)β»ΒΉ). Now suppose that the distance h is much smaller than the Earth's radius. So, for h βͺ Rβ, (1 + h/Rβ)β»ΒΉ β 1 - h/Rβ. So we find ΞU = GMm(1 - (1 - h/Rβ)) = GMm(h/RβΒ²) = mgh.
π Definition β Gravitational Potential Energy near Earth: For small heights h βͺ Rβ, the change in potential energy ΞU = mgh.
6. Escape Velocity
We can use the expression for potential energy and the law of conservation of energy to find the minimum velocity needed for a body to escape the Earth's gravity. Far away from the Earth, the potential energy is zero, and the smallest value for the kinetic energy is also zero. Requiring that (KE + PE) at r = R equals (KE + PE) at r = β gives (1/2)mvβΒ² - GMm/R = 0 + 0. From this, vβ = β(2GM/R) = β(2gRβ). Putting in some numbers we find that for the Earth vβ = 11.2 km/s. For the Sun, vβ = 618 km/s. For a Black Hole, the escape velocity is so high that nothing can escape, even if it could move with the speed of light! (Nevertheless, Black Holes can be observed because when matter falls into them, a certain kind of radiation is emitted.)
π Formula: vβ = β(2GM/R) β Escape velocity equals the square root of twice the gravitational constant times the mass divided by the radius.
7. Satellite Orbits
A satellite is in circular orbit over the Earth's surface. The condition for equilibrium: mvΒ²/r = GMm/rΒ² β vβ = β(GM/r). If Rβ is the Earth's radius, and h is the height of the satellite above the ground, then r = Rβ + h. For h βͺ Rβ, we can approximate vβ = β(GM/Rβ) = β(gRβ). We can easily calculate the time for one complete revolution, T = 2Ο/Ο = 2Οr/vβ = 2Οr/β(GM/r) = 2ΟrΒ³/Β²/β(GM). This gives the important result, observed by Kepler nearly 3 centuries ago that TΒ² β rΒ³, or TΒ² = (4ΟΒ²/GM)rΒ³.
π Formula: vβ = β(GM/r) β The orbital velocity of a satellite equals the square root of the gravitational constant times Earth's mass divided by the orbital radius.
π Formula: T = 2ΟrΒ³/Β²/β(GM) β The orbital period equals 2Ο times the 3/2 power of orbital radius divided by the square root of GM.
8. Total Energy of a Satellite
What is the total energy of a satellite moving in a circular orbit around the Earth? Clearly, it has two parts, kinetic and potential. Remember that the potential energy is negative. So, E = KE + PE = (1/2)mvβΒ² - GMβm/r. But vβΒ² = GM/r as we saw earlier, and therefore E = (1/2)(GMm/r) - GMm/r = -(1/2)GMm/r. Note that the magnitude of the potential energy is larger than the kinetic energy. If it wasn't, the satellite would not be bound to the Earth!
π Formula: E = -(1/2)GMm/r β The total energy of a satellite in circular orbit is negative one-half times the gravitational constant times the masses divided by the orbital radius.
π‘ Why this matters: The negative total energy indicates a bound system β the satellite cannot escape Earth's gravity without additional energy input.
9. Kepler's Equal Area Law
A famous discovery of the astronomer Johann Kepler some 300 years ago says that the line joining a planet to the Sun sweeps out equal areas in equal intervals of time. We can easily see this from the conservation of angular momentum. Call ΞA the area swept out in time Ξt. Then from the diagram you can see that ΞA = (1/2)r(rΞΞΈ). Divide this by Ξt and then take the limit where it becomes very small: dA/dt = lim(Ξtβ0) ΞA/Ξt = (1/2)rΒ²(lim(Ξtβ0) ΞΞΈ/Ξt) = (1/2)rΒ²Ο = L/(2m). Since L is a constant, we have proved one of Kepler's laws (with so little effort)!
β Key Takeaways
The gravitational force is always attractive and follows the inverse-square law. The gravitational constant G is extremely small, making Cavendish's measurement a remarkable achievement. The acceleration due to gravity g = 9.8 m/sΒ² allows direct calculation of Earth's mass and density. Escape velocity depends only on the mass and radius of the celestial body, not on the mass of the escaping object. For satellites in circular orbits, total energy is negative and half the magnitude of potential energy, indicating a bound system. Kepler's equal area law follows directly from conservation of angular momentum.
π§ Quick Revision Questions
- Write the mathematical expression for Newton's law of universal gravitation, identifying all variables.
- How is the gravitational constant G determined experimentally using the Cavendish torsion balance?
- Derive the escape velocity formula from conservation of energy.
- Show that for a satellite in circular orbit, TΒ² β rΒ³.
- Prove Kepler's equal area law using angular momentum conservation.
π Lecture 22 β ELECTROSTATICS I
π Overview: This lecture introduces electrostatics, the study of stationary electric charges. It covers Coulomb's Law for the force between charges, the concepts of electric field and field lines, and the behavior of electric dipoles. Understanding these fundamentals is crucial for analyzing electric forces, fields, and the structure of matter at a microscopic level.
ποΈ Topics Covered
This lecture begins with Coulomb's Law describing the force between point charges, and the constants involved. It then explains the quantization and conservation of charge, introduces the concept of scalar and vector fields, and defines the electric field. The lecture continues with typical electric field magnitudes, a method for measuring charge, and the superposition principle for calculating fields from multiple charges. Finally, it derives the electric field of a dipole and the torque it experiences in a uniform field.
π Lecture Summary
1. Coulomb's Law
Like charges repel, unlike charges attract. Coulomb's Law quantifies this force. It states that the magnitude of the electrostatic force between two point charges is directly proportional to the product of the magnitudes of the charges and inversely proportional to the square of the distance between them. In mathematical terms: ( F \propto \frac{q_1 q_2}{r^2} ), which becomes an equality with a constant of proportionality ( k ). In MKS units, charge is measured in Coulombs (C) and ( k = \frac{1}{4 \pi \varepsilon_0} ), where the permittivity of free space is ( \varepsilon_0 = 8.85 \times 10^{-12} \text{ C}^2/\text{N m}^2 ) and ( k = 8.99 \times 10^9 \text{ N m}^2/\text{C}^2 ). The vector form is ( \vec{F}{12} = \frac{1}{4 \pi \varepsilon_0} \frac{q_1 q_2}{r{12}^2} \hat{r}{12} ), where ( \hat{r}{12} ) is the unit vector from charge 2 to charge 1, representing the force on charge 1 due to charge 2.
π Definition β Coulomb's Law: The magnitude of the electrostatic force between two point charges is directly proportional to the product of the magnitudes of the charges and inversely proportional to the square of the distance between them. π Formula: ( F = k \frac{q_1 q_2}{r^2} = \frac{1}{4 \pi \varepsilon_0} \frac{q_1 q_2}{r^2} ) β The electric force between two charges decreases with the square of the distance between them. π Example: For many charges, the total force on a charge like ( q_1 ) is the vector sum of the forces from all other individual charges: ( \vec{F}1 = \vec{F}{12} + \vec{F}{13} + \vec{F}{14} + \cdots ).
2. Charge is Quantized
Charge is quantized, meaning it comes only in discrete units. The size of any charge can only be an integer multiple of the fundamental charge, ( e = 1.602 \times 10^{-19} \text{ C} ). This is expressed as ( q = ne ), where ( n ) is an integer.
π Definition β Charge Quantization: The principle that electric charge exists in discrete amounts, which are integer multiples of the elementary charge, ( e ).
3. Charge is Conserved
Charge is conserved, meaning it is never created or destroyed in any process. The total electric charge in an isolated system remains constant over time. In any reaction, the initial total charge equals the final total charge.
π Example: In electron-positron annihilation, ( e^- + e^+ \rightarrow \gamma + \gamma ), the initial total charge is 0 (from +1 and -1) and the final total charge is 0 (neutral photons).
4. Field
A field is a quantity that has a definite value at any point in space and at any time. A scalar field is described by a single number, such as temperature ( T(x, y, z, t) ). A vector field is described by three numbers at each point in space and time, such as velocity, pressure, or the electric field.
π Definition β Field: A physical quantity that has a value at every point in space and time.
5. The Electric Field
The electric field ( \vec{E} ) is a vector field. It is defined as the electric force on a unit test charge placed at that point. To avoid disturbing the field, the test charge ( q_0 ) must be very small. The electric field due to a point charge ( q ) is ( \vec{E} = \frac{1}{4 \pi \varepsilon_0} \frac{q}{r^2} \hat{r} ). Electric fields can be visualized using field lines that start on positive charges and end on negative charges, with the density of lines indicating the field's magnitude.
π Definition β Electric Field: The force per unit charge experienced by a stationary test charge: ( \vec{E} = \frac{\vec{F}}{q_0} ). π Example: Typical magnitudes include ( 10^{11} \text{ N/C} ) inside an atom and ( 10^{-2} \text{ N/C} ) inside a wire.
6. Measuring Charge
One method to measure charge is by balancing the gravitational force on a charged particle with the electric force from a known field. For a particle of mass ( m ) in equilibrium, ( mg = qE ), so the unknown charge can be found as ( q = \frac{mg}{E} ).
π Formula: ( q = \frac{mg}{E} ) β The charge on a particle can be determined by finding the electric field required to balance its weight.
7. The Superposition Principle
The total electric field at a point due to a collection of charges is the vector sum of the fields produced by each charge individually. This is the superposition principle: ( \vec{E} = \vec{E}_1 + \vec{E}_2 + \vec{E}_3 + \cdots = k \sum_i \frac{q_i}{r_i^2} \hat{r}_i ), where ( \hat{r}_i ) is the unit vector pointing from charge ( q_i ) to the point of observation.
8. The Electric Field of a Dipole
An electric dipole consists of two equal and opposite charges, ( +q ) and ( -q ), separated by a distance ( d ). For a point on the perpendicular bisector of the dipole at a large distance ( x \gg d ), the vertical components of the fields from the two charges cancel. The net field is directed along the dipole axis. The magnitude is calculated by summing the horizontal components: ( E = 2E_+ \cos \theta ), where ( \cos \theta = \frac{d/2}{\sqrt{x^2 + (d/2)^2}} ). This yields ( E = \frac{1}{4 \pi \varepsilon_0} \frac{qd}{[x^2 + (d/2)^2]^{3/2}} ).
π Formula: For ( x \gg d ), the dipole field is ( E = \frac{1}{4 \pi \varepsilon_0} \frac{p}{x^3} ), where the dipole moment is ( p = qd ).
9. Torque on a Dipole
When an electric dipole is placed in a uniform electric field ( \vec{E} ), the forces on the two charges are equal and opposite, creating a torque but no net force. The magnitude of the torque is ( \tau = F \frac{d}{2} \sin \theta + F \frac{d}{2} \sin \theta = Fd \sin \theta ). Since ( F = qE ), the torque is ( \tau = qE d \sin \theta = pE \sin \theta ). The direction of the torque is perpendicular to the plane containing the dipole and the field.
π Formula: ( \tau = pE \sin \theta ) β The torque on a dipole in a uniform electric field is the product of its dipole moment, the field strength, and the sine of the angle between them.
β Key Takeaways
Coulomb's Law is the fundamental equation for the electrostatic force, being inversely proportional to the square of the distance. Charge is both quantized, existing only in integer multiples of the elementary charge, and conserved, meaning the total charge in an isolated system remains constant. The electric field is the force per unit charge and is a vector field; the field from multiple charges is found using the superposition principle. An electric dipole produces an electric field that falls off as ( 1/r^3 ) along its axis, and it experiences a torque in a uniform field, given by ( \tau = pE \sin \theta ).
π§ Quick Revision Questions
- State Coulomb's Law in words and give its mathematical form.
- What is the value of the elementary charge, ( e ), in Coulombs?
- What does the principle of charge conservation imply for an isolated system?
- How is the electric field defined, and what is the formula for the field due to a point charge?
- For an electric dipole far away, how does the electric field magnitude depend on distance?