📘 Lecture 23 — ELECTROSTATICS II
📖 Overview: This lecture continues the study of electrostatics by showing how to calculate electric fields from continuously distributed charges, rather than just point charges. It introduces the concept of charge density and demonstrates its application through examples like the ring of charge and infinite line of charge. The lecture culminates with the powerful Gauss's Law, relating electric flux through a closed surface to the enclosed charge.
🗂️ Topics Covered
The lecture covers calculating electric fields from continuous charge distributions using integration, defining linear, surface, and volume charge densities, and working through the example of a uniform ring of charge to find the field on its axis. It then examines the field from an infinite line of charge, introduces the concept of electric flux, and uses it to derive Gauss's Law, applying it to a sphere with charge at its center and a hollow sphere with charge on its surface.
📝 Lecture Summary
1. Calculating Electric Field from Continuous Charge Distributions
To calculate the electric field from a continuous charge distribution, we break the region into infinitesimally small pieces, each acting like a point charge. The total field is the vector sum (integral) of the contributions from all pieces. The electric field vector E can be resolved into components, and we integrate each component separately: E = ∫ dE, or Ex = ∫ dEx, Ey = ∫ dEy, Ez = ∫ dEz.
2. Charge Density
When charges are continuously distributed over a line, surface, or volume, we define a charge density to specify the charge per unit length, area, or volume. 🔑 Definition — Linear charge density (λ): charge per unit length, dq = λ ds. 🔑 Definition — Surface charge density (σ): charge per unit area, dq = σ dA. 🔑 Definition — Volume charge density (ρ): charge per unit volume, dq = ρ dV.
3. Example: Electric Field of a Uniform Ring of Charge
Consider a ring of radius R with uniform linear charge density λ, lying in the x-y plane. We want the electric field at a point P on the z-axis, a distance z from the center. Due to symmetry, the x and y components cancel, leaving only the z-component. 💡 Why this matters: This is a classic problem showing how to integrate over a continuous charge distribution. 🔑 Formula: dEz = dE cosθ = (1/(4πε0)) * (λ ds / (z² + R²)) * (z / √(z² + R²)) = (z λ ds) / (4πε0 (z² + R²)^(3/2)) 📌 Example: To find Ez, integrate over the entire ring (s from 0 to 2πR). Since z, λ, and R are constants, Ez = (z λ / (4πε0 (z² + R²)^(3/2))) ∫ ds = (z λ / (4πε0 (z² + R²)^(3/2))) * (2πR) = (q z) / (4πε0 (z² + R²)^(3/2)) where q = 2πRλ is the total charge. For large z (z >> R), Ez ≈ q / (4πε0 z²), which is the field of a point charge q.
4. Example: Electric Field of an Infinite Line of Charge
Consider an infinitely long wire along the z-axis with uniform linear charge density λ. We want the electric field at a point P at a perpendicular distance y from the wire. By symmetry, the field points radially away from the wire. 🔑 Formula: dE = (1/(4πε0)) * (λ dz / (y² + z²)) 📌 Example: To find the y-component, we integrate dEy = dE cosθ. Using substitution z = y tanθ, the integral yields Ey = λ / (2π ε0 y). Since the result only depends on the perpendicular distance from the wire, it is written as E = λ / (2π ε0 r), where r is the distance from the wire.
5. Concept of Flux
The electric flux (Φ) through a surface is a measure of the "flow" of the electric field through that surface. For a uniform electric field normal to a flat surface of area A, Φ = EA. More generally, for any surface, we divide it into small area elements, take the component of E normal to each element, and sum them: Φ = ∫ E · dA.
6. Gauss's Law
Applying the flux concept to a sphere of radius r with a point charge q at its center, the total flux is Φ = E * (4πr²) = (q / (4πε0 r²)) * (4πr²) = q / ε0. This leads to Gauss's Law: the total electric flux through any closed surface is equal to the net charge enclosed by that surface divided by ε0. 🔑 Formula: Φ = ∮ E · dA = q_enclosed / ε0
7. Application: Hollow Sphere with Surface Charges
Applying Gauss's Law to a hollow sphere with total charge q on its surface: for any spherical Gaussian surface inside the sphere (r < R), q_enclosed = 0, so E = 0. For any Gaussian surface outside the sphere (r > R), q_enclosed = q, and due to symmetry, the field is E = (1/(4πε0)) * (q / r²), which is the same as if all the charge were concentrated at the center.
⭐ Key Takeaways
Gauss's Law is a fundamental principle equivalent to Coulomb's Law, stating that the total electric flux through any closed surface is proportional to the enclosed charge. It provides a powerful method for calculating electric fields in highly symmetric situations, such as spherical, cylindrical, or planar charge distributions. Continuous charge distributions require integration of Coulomb's Law, using charge densities (λ, σ, ρ) to describe the charge per unit length, area, or volume. The electric field inside a hollow, uniformly charged spherical shell is zero, while outside it behaves as a point charge at the center.
🧠 Quick Revision Questions
- What are the three types of charge densities and their units?
- Derive the expression for the electric field on the axis of a uniformly charged ring.
- State Gauss's Law in mathematical form and explain its physical meaning.
- Using Gauss's Law, find the electric field at a point inside and outside a uniformly charged hollow sphere.
- For an infinite line of charge, what is the direction and magnitude of the electric field at a distance r from the wire?
📘 Lecture 24 — ELECTRIC POTENTIAL ENERGY
📖 Overview: This lecture introduces the concept of electric potential energy by drawing an analogy with gravitational potential energy. It defines how work done against the electrostatic force is stored as potential energy, explains the electric potential of a single charge and a system of charges, and applies these concepts to the electric dipole and a charged ring. Understanding potential is essential because it simplifies the calculation of electric fields and forces in electrostatics.
🗂️ Topics Covered
The lecture begins by reviewing the definition of potential energy from work done by a conservative force, then extends this to the electrostatic force between two charges. It derives the electric potential due to a point charge, introduces the electron volt as a unit of energy, explains the behavior of charges in potential fields, and discusses the scalar nature of potential and its superposition for multiple charges. Specific applications include the potential of an electric dipole and a uniformly charged ring.
📝 Lecture Summary
1. Work and Potential Energy
Work done by a force F over a displacement ds from point a to b is W_ab = ∫_a^b F·ds. The change in potential energy is defined as ΔU = U_b – U_a = –W_ab. This definition is only valid for conservative forces, such as the electrostatic force.
2. Electric Potential Energy of Two Point Charges
Consider bringing a unit positive charge from infinity to a distance R from a fixed charge q. The work done against the repulsive force is: W_ab = ∫∞^R (–qE) dr = –(q/(4πε_0)) ∫∞^R (dr/r²) = –q/(4πε_0) * (1/R – 1/∞) = –q/(4πε_0 R). The negative sign arises because the force exerted on the unit charge is directed towards q (opposite to the displacement direction). Thus, the change in potential energy is ΔU = U(R) – U(∞) = q/(4πε_0 R). Taking potential energy at infinity as zero, the electric potential energy of a charge q at distance r is U(r) = q/(4πε_0 r).
🔑 Definition — Electric Potential Energy (U): The energy stored in a system of charges due to their relative positions, equal to the work done to assemble them from infinite separation.
📐 Formula: U(r) = q/(4πε₀ r) → The potential energy of a charge q at distance r from a point charge is directly proportional to the charge and inversely proportional to the distance.
📌 Example: For two charges q₁ = 2 μC and q₂ = –3 μC separated by 0.5 m, the potential energy is U = (1/(4πε₀)) * (q₁ q₂)/r = (9×10⁹) * ((2×10⁻⁶)(–3×10⁻⁶))/0.5 = –0.108 J. The negative sign indicates attraction.
The potential energy between two charges q₁ and q₂ separated by distance r is U(r) = (1/(4πε₀)) * (q₁ q₂)/r. This is analogous to gravitational potential energy U_grav = –G m₁ m₂ / r. The key difference: gravitational force is always attractive (negative sign), while electrostatic force can be attractive or repulsive (sign of product depends on charge signs).
3. Electric Potential and the Electron Volt
The electric potential (or simply potential) V is the electric potential energy per unit charge. V = U/q. In MKS units, 1 Volt = 1 Joule/Coulomb.
Electron volt (eV): A unit of energy commonly used in atomic and nuclear physics.
🔑 Definition — Electron Volt (eV): The energy gained by an electron when it is accelerated through a potential difference of one volt.
📐 Formula: 1 eV = (1.6×10⁻¹⁹ C) × 1 V = 1.6×10⁻¹⁹ J
Common multiples: 1 KeV = 10³ eV (kilo-electron-volt), 1 MeV = 10⁶ eV (million-electron-volt), 1 GeV = 10⁹ eV (giga-electron-volt), 1 TeV = 10¹² eV (tera-electron-volt).
📌 Example: An electron accelerated through a potential difference of 1000 V gains 1000 eV = 1.6×10⁻¹⁶ J of kinetic energy.
4. Potential and Charge Motion
Every system seeks to minimize its potential energy. Therefore:
- Positive charges accelerate toward regions of lower potential.
- Negative charges accelerate toward regions of higher potential.
Only potential differences matter for charge motion; a charge at a high potential won't move unless there is a nearby region with a different potential.
💡 Why this matters: This explains the direction of current flow in circuits and the behavior of particles in electric fields.
5. General Properties of Electric Potential
a) Potentials are more positive in regions with more positive charge. b) Electric potential is a scalar quantity (a scalar field). c) The potential determines the force: F = –dU/dr, and the electric field: E = F/q. d) Electric potential exists only because the electrostatic force is conservative.
6. Potential Due to a System of Point Charges
Because potential is a scalar, the total potential at a point from multiple charges is the algebraic sum of their individual potentials. For N charges q_i at distances r_i from the point: V = Σ V_i = (1/(4πε₀)) Σ (q_i / r_i).
📌 Example: For three charges q₁, q₂, q₃, the total potential at a point is V = (1/(4πε₀)) * (q₁/r₁ + q₂/r₂ + q₃/r₃). The interaction energies are not simply added to the potential; for the total potential energy of the system, one must also include pairwise terms like V = (1/(4πε₀)) (q₁q₂/r₁₂ + q₁q₃/r₁₃ + q₂q₃/r₂₃).
7. Potential of an Electric Dipole
A dipole consists of +q and –q separated by distance d. The potential at a point P (distance r >> d, at angle θ from the dipole axis) is: V_P = V₁ + V₂ = (1/(4πε₀)) (q/r₁ – q/r₂). Since r >> d: r₂ – r₁ ≈ d cosθ and r₁ r₂ ≈ r². Thus, V ≈ (1/(4πε₀)) * (q d cosθ)/r² = (1/(4πε₀)) * (p cosθ)/r², where p = qd is the dipole moment.
📐 Formula: V_dipole = (1/(4πε₀)) * (p cosθ)/r² → Potential falls off as 1/r² (faster than a point charge's 1/r).
📌 Example: For a dipole with p = 3×10⁻³⁰ C·m at a point r = 1 nm and θ = 0°, V = (9×10⁹) * (3×10⁻³⁰ * 1)/(10⁻¹⁸) = 0.27 V.
Note that V = 0 at θ = π/2 (perpendicular to the dipole axis).
8. Potential of a Uniformly Charged Ring
Consider a ring of radius R carrying total charge q uniformly distributed with linear charge density λ. The potential at a point P on the axis at distance z from the center is: dV = (1/(4πε₀)) * dq / r, where r = √(R² + z²). Integrating over the entire ring: V = ∫ dV = (1/(4πε₀)) * (∫ dq) / √(R² + z²) = (1/(4πε₀)) * q / √(R² + z²).
📐 Formula: V_ring = (1/(4πε₀)) * q / √(R² + z²) → Potential varies with z, and at the center (z=0): V = (1/(4πε₀)) * q/R.
📌 Example: A ring of total charge q = 1 μC, radius R = 0.1 m, at a point on axis z = 0.1 m: V = (9×10⁹) * (1×10⁻⁶)/√(0.01+0.01) = 9000/√0.02 ≈ 63640 V.
⭐ Key Takeaways
Electric potential energy is defined from the work done against a conservative electrostatic force, with the potential of a point charge being U = q/(4πε₀ r). The electric potential V = U/q is a scalar quantity, and for multiple charges, total potential is simply the scalar sum of individual potentials. The electron volt (1 eV = 1.6×10⁻¹⁹ J) is a practical energy unit for microscopic systems. The behavior of charges is determined by potential differences: positive charges move toward lower potential, negative charges toward higher potential. Key applications include the dipole potential (V ∝ p cosθ/r²) and the ring potential (V = kq/√(R²+z²)), both derivable from scalar superposition.
🧠 Quick Revision Questions
- Define electric potential energy and state the formula for two point charges.
- What is a conservative force, and why is it essential for defining electric potential?
- Derive the potential of an electric dipole for a point far away, and explain why it falls off as 1/r².
- How many electron volts are equivalent to 3.2 × 10⁻¹⁹ J?
- What is the potential at a point on the axis of a uniformly charged ring, and what happens to this potential as the point approaches the ring's center?
📘 Lecture 25 — Capacitors and Currents
📖 Overview: This lecture introduces capacitors as devices for storing electric charge and energy, derives the capacitance formula for parallel plates, and explains how capacitors behave in series and parallel configurations. It also covers energy storage in capacitors, the concept of energy density in electric fields, and the role of dielectrics in modifying capacitance. Understanding capacitors is fundamental to electronic circuits and energy storage systems.
🗂️ Topics Covered
The lecture covers the definition and basic principle of capacitance, calculation of capacitance for parallel plate capacitors using Gauss's Law, combinations of capacitors in parallel and series circuits, energy stored in a capacitor and electric field energy density, and the effect of dielectrics on capacitance through the dielectric constant.
📝 Lecture Summary
1. Two conductors isolated from one another and from their surroundings, form a capacitor.
A capacitor consists of two conductors separated by an insulator. When a potential difference is applied (e.g., by a battery), opposite charges accumulate on the conductors. The amount of charge (Q) stored is proportional to the voltage (V), giving the defining relationship (Q = CV), where (C) is the capacitance. Capacitance depends on the geometry, size, and separation of the conductors.
🔑 Definition — Capacitance (C): (C = \frac{Q}{V}), the ratio of charge stored to the potential difference between the conductors.
2. Using the above definition, let us calculate the capacitance of two parallel plates separated by a distance d.
For parallel plates of area (A) separated by distance (d), we use Gauss's Law: (\Phi = \oint \vec{E} \cdot d\vec{A} = \frac{q_{\text{enclosed}}}{\varepsilon_0}). Choosing a Gaussian surface, the electric field in the gap is (E = \frac{Q}{\varepsilon_0 A}). The potential difference is (V = Ed), so capacitance becomes (C = \frac{Q}{V} = \frac{\varepsilon_0 A}{d}). This shows capacitance is large when plates are close (small (d)) and have large area. 💡 Why this matters: This formula is the foundation for designing practical capacitors.
📐 Formula: (C = \frac{\varepsilon_0 A}{d}) → Capacitance depends on the permittivity of free space (\varepsilon_0), plate area (A), and separation (d). 📌 Example: If two plates have area (A = 1\ \text{m}^2) and separation (d = 0.01\ \text{m}), then (C = \frac{(8.85 \times 10^{-12})(1)}{0.01} = 8.85 \times 10^{-10}\ \text{F}).
3. One can take two (or more) capacitors in various ways...
For capacitors in parallel, the same voltage (V) is applied across each. Total charge (Q = q_1 + q_2 = C_1 V + C_2 V = (C_1 + C_2)V). The equivalent capacitance (C_{eq}) satisfies (C_{eq} = \frac{Q}{V} = C_1 + C_2). In general, for (n) capacitors in parallel: [ C_{eq} = \sum C_n ]
📐 Formula: (C_{eq} = C_1 + C_2 + \cdots + C_n) → Capacitances add directly in parallel.
4. We can repeat the analysis above when the capacitors are put in series.
For capacitors in series, the same charge (Q) flows through each, but the voltages add: (V = V_1 + V_2). Using (V = \frac{Q}{C}), we get (\frac{Q}{C_{eq}} = \frac{Q}{C_1} + \frac{Q}{C_2}), leading to: [ \frac{1}{C_{eq}} = \frac{1}{C_1} + \frac{1}{C_2} ] In general, for (n) capacitors in series: [ \frac{1}{C_{eq}} = \sum \frac{1}{C_n} ] The total capacitance in series is less than any individual capacitance.
📐 Formula: (\frac{1}{C_{eq}} = \frac{1}{C_1} + \frac{1}{C_2} + \cdots + \frac{1}{C_n}) → Reciprocal rule for series.
5. When a battery is connected to a capacitor, positive and negative charges appear...
Energy is stored in the capacitor as it charges. To transfer a small charge (dq) when voltage is (v = \frac{q}{C}), the work is (dU = v,dq = \frac{q}{C},dq). Integrating from (0) to (Q): [ U = \int_0^Q \frac{q}{C},dq = \frac{Q^2}{2C} = \frac{1}{2} CV^2 ] This energy is stored in the electric field between the plates. The energy density (energy per unit volume) in the field is: [ u = \frac{U}{\text{volume}} = \frac{\frac{1}{2} CV^2}{Ad} = \frac{1}{2} \varepsilon_0 E^2 ] Thus, (u \propto E^2), meaning wherever there is an electric field, there is energy.
📐 Formula: (U = \frac{1}{2} CV^2) → Energy stored in a capacitor. 📐 Formula: (u = \frac{1}{2} \varepsilon_0 E^2) → Energy density in an electric field.
6. Dielectrics.
A dielectric is an insulating material that can be polarised when placed in an electric field. Its effect is described by the dielectric constant (\varepsilon_r) (also called relative permittivity). The electric field around a charge in a dielectric is reduced by a factor of (\varepsilon_r): [ E = \frac{1}{4\pi \varepsilon_0 \varepsilon_r} \frac{Q}{r^2} ] This weakens the field and increases capacitance. For a parallel plate capacitor with a dielectric: [ C = \varepsilon_r \frac{\varepsilon_0 A}{d} ] Typical values: (\varepsilon_r \approx 1.0003) for air, (\varepsilon_r \approx 80) for pure water. 💡 Why this matters: Using dielectrics allows smaller, higher-capacitance capacitors essential in electronics.
🔑 Definition — Dielectric constant ((\varepsilon_r)): A dimensionless number measuring how much a dielectric material reduces the electric field and increases capacitance. 📐 Formula: (C = \varepsilon_r \frac{\varepsilon_0 A}{d}) → Capacitance with a dielectric.
⭐ Key Takeaways
Capacitance is defined as (C = Q/V) and for parallel plates is (C = \varepsilon_0 A / d). In parallel circuits, capacitances add directly, while in series, they follow the reciprocal sum rule. The energy stored in a capacitor is (U = \frac{1}{2} CV^2), and the energy density in the electric field is (u = \frac{1}{2} \varepsilon_0 E^2). Dielectric materials increase capacitance by a factor equal to their dielectric constant (\varepsilon_r), reducing the electric field inside. These principles are essential for understanding capacitors in circuits and energy storage applications.
🧠 Quick Revision Questions
- What is the relationship between charge (Q), capacitance (C), and voltage (V) for a capacitor?
- Derive the formula for the capacitance of two parallel plates of area (A) separated by distance (d).
- How do you calculate the equivalent capacitance for two capacitors connected in parallel? In series?
- Write the expression for the energy (U) stored in a capacitor in terms of (C) and (V).
- What is a dielectric constant, and how does inserting a dielectric between capacitor plates affect its capacitance?
📘 Lecture 26 — Electric Potential Energy
📖 Overview: This lecture covers the fundamental concepts of electric current, its measurement, and the laws governing its flow in circuits. It explains Ohm's Law, resistance, series and parallel circuits, power dissipation, and Kirchhoff's rules, culminating in an analysis of RC circuits and the microscopic origin of current via drift velocity. These principles are essential for understanding and designing all electronic devices.
🗂️ Topics Covered
The lecture defines electric current and the ampere, distinguishes between conventional and electron flow, and introduces EMF as the driving potential. It then details Ohm's Law and resistance, the conservation of current (Kirchhoff's Junction Rule), and the rules for combining resistors in series and parallel. The summary explains power dissipation, Kirchhoff's Loop Rule, the transient behavior of RC circuits, and finally the concept of drift velocity and current density.
📝 Lecture Summary
[Electric current is the flow of electrical charge.]
Electric current is the flow of electrical charge. If a small amount of charge dq flows in time dt, then the current is i = dq/dt. If the current is constant in time, then in time t, the charge that flows is q = i × t. The unit of charge is ampere, defined as 1 ampere = 1 coulomb/second. A car’s battery supplies up to 50 amperes, but often we need to deal with smaller values: 1 milliampere = 1 mA = 10⁻³ A, 1 microampere = 1 μA = 10⁻⁶ A, 1 nanoampere = 1 nA = 10⁻⁹ A, and 1 picoampere = 1 pA = 10⁻¹² A.
[The direction of current flow]
The direction of current flow is the direction in which positive charges move (conventional current). However, in a typical wire, the positive charges are fixed to the atoms and it is really the negative charges (electrons) that move, resulting in an electron flow opposite to the conventional current direction. 🔑 Definition — Conventional Current: The direction of current flow is defined as the direction in which positive charges would move.
[Current flows because of EMF]
Current flows because something forces it around a circuit. That "something" is EMF, or electromotive force. EMF is not a force; it is the difference in electric potentials between two parts of a circuit, V = Vₐ − V_b, which causes current to flow. In general, the larger V is, the more current will flow, and we expect I ∝ V. When this linear relation holds, we say Ohm's Law applies: I = V/R. Here, R = V/I is called the resistance. 🔑 Definition — Ohm's Law: The current through a conductor is directly proportional to the voltage across it, provided the temperature and other physical conditions remain constant. 📐 Formula: I = V / R → The current (I) equals the voltage (V) divided by the resistance (R).
[Be careful in understanding Ohm's Law]
The resistance may depend upon the current. Example: when current passes through a resistor, it gets hot and its resistance increases. Only when the graph of current versus voltage is a straight line does Ohm’s Law hold. Otherwise, we can only define the incremental resistance, R = ΔV/ΔI. A straight line indicates Ohm's law is obeyed, while a curved line indicates it is not. 💡 Why this matters: Many real-world components like diodes and transistors do not obey Ohm's Law, requiring more complex analysis.
[Charge is always conserved]
Charge is always conserved, and therefore current is conserved as well. This means that when a current splits into two currents, the sum remains constant, i₁ = i₂ + i₃ (known as Kirchhoff's Junction Rule).
[When resistors are put in series]
When resistors are put in series with each other, the same current flows through both. The total potential drop across the pair is V = V₁ + V₂ = i(R₁ + R₂), which implies the equivalent resistance R_eq = R₁ + R₂. So resistors in series add up. 📐 Formula: R_eq = R₁ + R₂ + R₃ + ... → The total resistance of resistors in series is the sum of their individual resistances. 📌 Example: Two resistors, 10 Ω and 20 Ω, are connected in series. The equivalent resistance is R_eq = 10 Ω + 20 Ω = 30 Ω.
[Resistors can also be put in parallel.]
Resistors can also be put in parallel. This means that the same voltage V is across both, so the currents are i₁ = V/R₁ and i₂ = V/R₂. Since i = i₁ + i₂, it follows that i = V/R_eq = V/R₁ + V/R₂, which gives 1/R_eq = 1/R₁ + 1/R₂. This makes sense: with two possible paths, the current will find less resistance than if only one was present. 📐 Formula: 1/R_eq = 1/R₁ + 1/R₂ + 1/R₃ + ... → The reciprocal of the total resistance of resistors in parallel is the sum of the reciprocals of their individual resistances. 📌 Example: Two resistors, 10 Ω and 20 Ω, are connected in parallel. The equivalent resistance is 1/R_eq = 1/10 + 1/20 = 3/20, so R_eq = 20/3 ≈ 6.67 Ω.
[When current flows in a circuit work is done.]
When current flows in a circuit, work is done. Suppose a small amount of charge dq is moved through a potential difference V. Then the work done is dW = V dq = V i dt. Using Ohm's Law (V = iR), we get V i dt = i²R dt. The rate of doing work, i.e., power, is P = dW/dt = i²R. This is an important formula, which can also be written as P = V²/R or P = iV. The unit of power is the watt, where 1 volt-ampere = 1 (coulomb/second) · (joule/coulomb) = 1 joule/second = 1 watt. 📐 Formula: P = i²R = V²/R = iV → The power dissipated by a resistor is equal to the square of the current times the resistance.
[Kirchoff's Law]
Kirchhoff's Loop Rule: The sum of the potential differences encountered in moving around a closed circuit is zero. This law is derived from the principle that the electric field is conservative, so no net work is done in taking a charge all around a circuit and putting it back where it was. As a trivial example, consider a circuit with a resistor and battery. Starting from point a and going around: Vₐ − iR + ε = Vₐ, which gives ε − iR = 0. 🔑 Definition — Kirchhoff's Loop Rule: The algebraic sum of the changes in potential around any closed loop of a circuit must be zero.
[We can apply Kirchoff's Law to an RC circuit.]
We can apply Kirchhoff's Law to a circuit that consists of a resistor and capacitor (RC circuit) in order to see how current flows through it. Since q = VC, we get q/C + iR = 0. Differentiating with respect to time gives (1/C)(dq/dt) + R(di/dt) = 0, or di/dt = -(1/RC)i. This equation has solution: i = i₀ e^(-t/RC). The product RC is called the time constant τ, and it gives the time by which the current has fallen to 1/e ≈ 1/2.7 of its initial value. 🔑 Definition — Time Constant (τ) : The time required for the current in an RC circuit to decrease to 1/e (about 36.8%) of its initial value, equal to the product of resistance and capacitance. 📐 Formula: i(t) = i₀ e^(-t/RC) → The current at time t decays exponentially from its initial value i₀ with a time constant of RC.
[Circuits often have two or more loops.]
Circuits often have two or more loops. To find the voltages and currents, it is best to apply Kirchhoff's Laws. For a two-loop circuit with three resistors (R₁, R₂, R₃) and two batteries (ε₁, ε₂), the three equations are: i₁ + i₃ = i₂ (junction rule), ε₁ − i₁R₁ + i₃R₃ = 0 (left loop), and −i₃R₃ − i₂R₂ + ε₂ = 0 (right loop). Solving these yields the currents: i₁ = [ε₁(R₂ + R₃) − ε₂R₃] / [R₁R₂ + R₂R₃ + R₁R₃] i₂ = [ε₂(R₁ + R₃) − ε₁R₃] / [R₁R₂ + R₂R₃ + R₁R₃] i₃ = [−ε₁R₂ − ε₂R₁] / [R₁R₂ + R₂R₃ + R₁R₃]
[A charge inside a wire moves under the influence of the applied electric field.]
A charge inside a wire moves under the influence of the applied electric field but suffers many collisions, causing it to move on a highly irregular, jagged path. Nevertheless, it moves on average to the right at the drift velocity (or speed).
[Consider a wire through which charge is flowing.]
Consider a wire through which charge is flowing. If the number of charges per unit volume is n, and the cross-sectional area is A, then the charge in a length L is q = (nAL)e. If the drift velocity of the charges is v_d, then the time taken for the charge to move through the wire is t = L/v_d. Hence, the current is i = q/t = nALe / (L/v_d) = nA e v_d. From this, we can calculate the drift velocity: v_d = i/(nAe). The current density, which is the current per unit cross-sectional area, is defined as j = i/A = n e v_d. If j varies inside a volume, this generalizes to i = ∫j · dA. 🔑 Definition — Drift Velocity (v_d): The average velocity that a charged particle (e.g., an electron) attains due to an electric field in a conductor. 📐 Formula: i = nA e v_d → The current is equal to the number of charge carriers per unit volume (n) times the cross-sectional area (A) times the charge of each carrier (e) times the drift velocity (v_d). 📌 Example: A copper wire with cross-sectional area A = 1 × 10⁻⁶ m² carries a current of 1 A. If n (charge density for copper) is approximately 8.5 × 10²⁸ electrons/m³ and e = 1.6 × 10⁻¹⁹ C, the drift velocity is v_d = 1 / (8.5 × 10²⁸ × 1 × 10⁻⁶ × 1.6 × 10⁻¹⁹) ≈ 7.4 × 10⁻⁵ m/s, which is very slow.
⭐ Key Takeaways
You must understand the definition of electric current and the unit ampere. Ohm's Law (V = IR) is the cornerstone of circuit analysis, but you must know its limitations. You need to master how to calculate equivalent resistance for both series (R_eq = R₁ + R₂) and parallel (1/R_eq = 1/R₁ + 1/R₂) circuits and apply Kirchhoff's Laws (Junction and Loop Rules) to analyze multi-loop circuits. The power dissipated by a resistor is given by P = I²R = V²/R, and in an RC circuit, the current decays exponentially with a time constant τ = RC. Finally, remember that the drift velocity of electrons in a wire is very small, with current being a measure of the total charge flow per second.
🧠 Quick Revision Questions
- A current of 2 A flows for 10 seconds through a wire. How much total charge passes through a cross-section of the wire?
- What is the equivalent resistance of a 10 Ω and a 15 Ω resistor connected in parallel?
- State Kirchhoff's Loop Rule in your own words and what physical principle it is based on.
- A 9 V battery is connected across a 5 Ω resistor. What is the power dissipated by the resistor?
- In an RC circuit with R = 1 kΩ and C = 10 µF, what is the time constant, and to what approximate percentage of its initial value will the current fall after this time?
📘 Lecture 27 — THE MAGNETIC FIELD
📖 Overview: This lecture introduces the magnetic field and its fundamental properties, including how it exerts forces on moving charges and current-carrying wires. It covers critical concepts such as the Lorentz force, circular motion of charged particles in magnetic fields, and Ampere's Law, which are essential for understanding electromagnetism and many real-world applications from mass spectrometers to Earth's magnetic shielding.
🗂️ Topics Covered
The lecture covers the magnetic force on moving charges and its dependence on charge, velocity, and magnetic field strength; the Lorentz force combining electric and magnetic effects; velocity selectors; the fact that magnetic fields do no work on particles; circular motion of charged particles in magnetic fields; Earth's magnetic shielding and Van Allen belts; the mass spectrometer; magnetic force on current-carrying wires; magnetic moments of current loops; and Ampere's Law applied to current-carrying wires both inside and outside the conductor.
📝 Lecture Summary
1. The magnetic field exerts a force upon any charge that moves in the field
The greater the size of the charge, and the faster it moves, the larger the force. The direction of the force is perpendicular to both the direction of motion and the magnetic field. If θ is the angle between v and B, then F = qvB sinθ is the magnitude of the force. This vanishes when v and B are parallel (θ = 0), and is maximum when they are perpendicular.
🔑 Definition — Magnetic Force on a Moving Charge: F = qvB sinθ, where the force magnitude depends on charge (q), velocity (v), magnetic field strength (B), and the sine of the angle between v and B.
2. The unit of magnetic field
The unit of magnetic field that is used most commonly is the tesla. A charge of one coulomb moving at 1 metre per second perpendicularly to a field of one tesla experiences a force of 1 newton. Equivalently, 1 tesla = 1 newton/(coulomb·meter/second) = 1 newton/(ampere·meter) = 10⁴ gauss (CGS unit).
Typical magnetic field values include: Earth's surface (10⁻⁴ T), bar magnet (10⁻² T), powerful electromagnet (1 T), and superconducting magnet (5 T).
💡 Why this matters: Understanding the tesla unit and typical field strengths helps you appreciate the enormous range of magnetic fields from Earth's weak field to powerful laboratory magnets.
3. The Lorentz Force
When both magnetic and electric fields are present at a point, the total force acting upon a charge is the vector sum of the electric and magnetic forces: F = qE + qv × B. This is known as the Lorentz Force. The electric force is non-zero even if the charge is stationary, and it is in the same direction as E.
🔑 Definition — Lorentz Force: F = qE + qv × B, the total force on a charged particle when both electric and magnetic fields are present.
4. Velocity Selector
The Lorentz Force can be used to select charged particles of whichever velocity we want. Particles enter from the left with velocity v. They experience a force due to the perpendicular magnetic field, as well as force downwards because of an electric field. Only particles with speed v = E/B are undeflected and keep going straight.
📐 Formula — Velocity Selector: v = E/B → The speed at which electric force (qE) exactly balances magnetic force (qvB), allowing particles to pass straight through.
📌 Example: If an electric field of 1000 N/C and a magnetic field of 0.1 T are applied perpendicular to each other, then only particles with v = (1000)/(0.1) = 10,000 m/s will pass undeflected through the velocity selector.
5. A magnetic field can never increase or decrease the energy of a particle
Proof: suppose the magnetic force F moves a particle through a displacement dr. Then the small amount of work done is dW = F·dr = q(v × B)·dr = q(v × B)·(v dt) = 0 (since v × B is perpendicular to v, the dot product with v is zero). Basically the force and direction of force are orthogonal, and hence there can be no work done on the particle or an increase in its energy.
6. A magnetic field bends a charged particle into a circular orbit
The particle feels a force directed perpendicular to the magnetic field. As we saw above, the particle cannot change its speed, but it certainly does change direction. So it keeps bending until it makes a full circle. The radius of orbit can be easily calculated: the magnetic and centrifugal forces must balance each other for equilibrium. So, qvB = mv²/r and we find that r = mv/(qB). A strong B forces the particle into a tighter orbit. We can also calculate the angular frequency, ω = v/r = qB/m. This shows that a strong B makes the particle go around many times in unit time.
📐 Formula — Radius of Circular Motion: r = mv/(qB) → The radius of a charged particle's circular path in a magnetic field depends on momentum divided by the product of charge and field strength.
📐 Formula — Angular Frequency (Cyclotron Frequency): ω = qB/m → The angular frequency depends only on charge, field strength, and mass, not on velocity.
7. Earth's magnetic shielding
The fact that a magnetic field bends charged particles is responsible for shielding the earth from harmful effects of the "solar wind". A large number of charged particles are released from the sun and reach the earth. These can destroy life. Fortunately the earth's magnetic field deflects these particles, which are then trapped in the "Van Allen" belt around the earth.
8. The Mass Spectrometer
The mass spectrometer is an extremely important equipment that works on the principle of magnetic deflection. Ions are made from atoms by stripping away one electron. Then they pass through a velocity selector so that they all have the same speed. In a beam of many different ions, the heavier ones bend less, and lighter ones more, when they are passed through a B field. The equation r = mv/(qB) shows that for fixed v, q, and B, the radius r is directly proportional to mass m.
📌 Example: If two ions have masses m₁ and m₂ (m₂ = 2m₁) with the same charge and speed in the same magnetic field, the heavier ion will have twice the radius of the lighter one (r₂ = 2r₁), allowing their separation.
9. Force on a current-carrying wire
A wire carries current, and current is flowing charges. Since each charge experiences a force when placed in a magnetic field, you might expect the same for the current. Suppose the wire has length L, crossectional area A, and it has n charges per unit volume. Then the total force is F = nALev_d × B. Remember that the current is the charge that flows through the wire per unit time, so nAev_d = I. We get the important result that the force per unit length on the wire is F = I × B.
🔑 Definition — Magnetic Force on a Current-Carrying Wire: F = IL × B, where I is current and L is the length vector of the wire in the direction of current.
10. Magnetic moment of a current loop
A current that goes around a loop (any shape) produces a magnetic field. We define the magnetic moment as the product of current and area, μ = IA ẑ. Here A is the area of the loop and I the current flowing around it. The direction is perpendicular to the plane of the loop.
🔑 Definition — Magnetic Moment: μ = IA, where the direction is perpendicular to the plane of the loop (right-hand rule).
11. Ampere's Law
Magnetic fields are produced by currents. Every small bit of current produces a small amount of the B field. Ampere's Law says that if one goes around a loop (of any shape or size) then the integral of the B field around the loop is equal to the enclosed current. ∮ B·ds = μ₀ I_enclosed.
🔑 Definition — Ampere's Law: ∮ B·ds = μ₀ I_enclosed, where the line integral of B around a closed loop equals μ₀ times the current passing through the loop.
12. Application of Ampere's Law to an infinitely long wire
Let us apply Ampere's Law to a circular loop of radius r outside an infinitely long wire carrying current I through it. The magnetic field goes around in circles, and so B and ds are both in the same direction. Hence, ∮ B·ds = B ∮ ds = B(2πr) = μ₀I. We get the important result that B = μ₀I/(2πr).
📐 Formula — Magnetic Field Outside a Long Wire: B = μ₀I/(2πr) → The magnetic field at distance r from a long straight wire is proportional to current and inversely proportional to distance.
13. Magnetic field inside a current-carrying wire
Assuming that the current flows uniformly over the crossection, we can use Ampere's Law to calculate the magnetic field at distance r, where r now lies inside the wire. For a wire of radius R, the enclosed current is I_enclosed = I(πr²/πR²) = Ir²/R². Applying Ampere's Law: B(2πr) = μ₀(Ir²/R²) → B = (μ₀Ir)/(2πR²).
📐 Formula — Magnetic Field Inside a Wire: B = (μ₀Ir)/(2πR²) for r < R → The field increases linearly with distance from the center inside the wire.
📌 Example: For a wire of radius R = 0.01 m carrying current I = 10 A, the magnetic field at the surface (r = R) is B = μ₀(10)/(2π×0.01) = 2×10⁻⁴ T. Inside the wire at r = 0.005 m, B = μ₀(10×0.005)/(2π×0.01²) = 1×10⁻⁴ T.
⭐ Key Takeaways
The magnetic field exerts a force on moving charges perpendicular to both velocity and field direction, given by F = qvB sinθ, and this force can never do work or change a particle's kinetic energy. The Lorentz force F = qE + qv×B combines electric and magnetic effects, enabling devices like velocity selectors where v = E/B. Charged particles move in circular paths with radius r = mv/(qB) and angular frequency ω = qB/m, principles used in mass spectrometers. Ampere's Law ∮ B·ds = μ₀I relates the magnetic field around a closed path to the enclosed current, giving B = μ₀I/(2πr) outside a wire and B = (μ₀Ir)/(2πR²) inside, both of which are essential for calculating magnetic fields from current distributions.
🧠 Quick Revision Questions
- What is the expression for the magnetic force on a moving charge, and under what condition is this force maximum and minimum?
- Explain why a magnetic field cannot increase or decrease the kinetic energy of a charged particle.
- Derive the expression for the radius of a charged particle moving perpendicular to a uniform magnetic field.
- State Ampere's Law and use it to find the magnetic field at a distance r (both inside and outside) from a long straight wire carrying current I.
- How does a velocity selector work, and what condition must be satisfied for particles to pass undeflected?
📘 Lecture 28 — Faraday's Law for Induced EMF
📖 Overview: This lecture explains Faraday's Law, which describes how a changing magnetic flux induces an electromotive force (EMF) in a circuit. It covers the mathematical formulation, practical examples including a flexible loop and a wire on rails, and introduces Lenz's Law for determining the direction of induced effects.
🗂️ Topics Covered
The lecture begins with a review of magnetic flux and introduces Faraday's Law of induction. It demonstrates how flux changes through area variation and field change with two worked examples. The general form of Faraday's Law using electric field integrals is presented. A detailed example of a conducting wire pulled on rails shows induced EMF and current calculation. Power dissipation is verified through both Joule heating and mechanical work. Finally, Lenz's Law is introduced to explain the direction of induced effects.
📝 Lecture Summary
3. Faraday's Law for Induced EMF
When the magnetic flux changes in a circuit, an electromotive force (EMF) is induced which is proportional to the rate of change of flux. Mathematically, ε = -dΦ_B/dt where ε is the induced emf. If the coil consists of N turns, then ε = -N dΦ_B/dt.
How does the flux through a coil change? Consider a coil and magnet. We can: a) move the magnet, b) change the size and shape of the coil by squeezing it, c) move the coil.
In all cases, the flux through the coil changes and dΦ_B/dt is non-zero leading to an induced emf.
🔑 Definition — EMF (Electromotive Force): not actually a force but the difference in electric potential between two points 📐 Formula: ε = -dΦ_B/dt → "The induced emf equals the negative rate of change of magnetic flux" 📌 Example: A flexible loop has a radius of 12cm and is in a magnetic field of strength 0.15T. The loop is grasped at points A and B and stretched until it closes. If it takes 0.20s to close the loop, find the magnitude of the average induced emf in it during this time.
Here the loop area changes, hence the flux. So the induced emf is: ε ≈ -[(final flux - initial flux)/time taken] = -[(0 - π(0.12)² × 0.15)/0.2] = 0.034 Volts
📌 Example: A wire loop of radius 0.30m lies so that an external magnetic field of +0.30T is perpendicular to the loop. The field changes to -0.20T in 1.5s. Find the magnitude of the average induced EMF in the loop during this time.
Use Φ = BA = Bπr² to calculate flux: Φ_i = 0.30 × π × (0.30)² = 0.085 Tm² Φ_f = -0.20 × π × (0.30)² = -0.057 Tm² ε = ΔΦ/Δt = (Φ_f - Φ_i)/Δt = (0.085 - 0.057)/1.5 = 0.095 V
💡 Why this matters: The induced emf depends only on the rate of change of flux, whether caused by area change, field change, or orientation change.
4. General Form of Faraday's Law
In going around a circular wire where the electric field is constant as a function of angle, the emf is ε = E(2πr). More generally, for any size or shape of a closed circuit: ε = ∮E·ds. So Faraday's Law reads: ∮E·ds = -dΦ_B/dt.
📌 Example: A conducting wire rests upon two parallel rails and is pulled towards the right with speed v. A magnetic field B is perpendicular to the plain of the rails. Find the current that flows in the circuit.
As the wire is pulled to the right, the area of the circuit increases and so the flux increases. Measure x so that x = vt, i.e. x keeps increasing as we pull. The flux at any value of x is Φ_B = BDx, and so: ε = -dΦ_B/dt = -d(BDx)/dt = -BD(dx/dt) = BDv
To calculate the current, simply use Ohm's Law: I = ε/R = BDv/R. Here R is the resistance of the circuit.
📌 Example: Find the power dissipated in the above circuit using I²R, and then by directly calculating the work you do by pulling the wire.
Clearly I²R = B²D²v²/R is the power dissipated. Now calculate the force acting upon the piece of wire (of length D) that you are pulling. From the formula for the force on a wire, F = IL×B, the magnitude is F = IBD. So, the power is P = Fv = B²D²v²/R. This is exactly the value calculated above!
5. Lenz's Law
Lenz's Law states: The direction of any magnetic induction effect is such as to oppose the cause of the effect. Imagine a coil wound with wire of finite resistance. If the magnetic field decreases, the induced EMF is positive. This produces a positive current. The magnetic field produced by the current opposes the decrease in flux. Of course, because of finite resistance in the loop, the induced current cannot completely oppose the change in flux.
🔑 Definition — Lenz's Law: The induced current flows in a direction that opposes the change in magnetic flux that produced it
⭐ Key Takeaways
Faraday's Law (ε = -dΦ_B/dt) is the fundamental principle linking changing magnetic flux to induced EMF, with the negative sign encoding Lenz's Law of opposition. The flux can change through variation in magnetic field strength, loop area, or orientation, and for N turns the induced EMF scales by N. The general integral form ∮E·ds = -dΦ_B/dt connects the induced electric field around a closed path to the rate of flux change through that path. For a moving conductor on rails, the induced EMF equals BDv and the current is BDv/R, with power dissipation B²D²v²/R verified through both electrical and mechanical calculations. Lenz's Law provides the crucial directional rule that induced effects always oppose their cause, ensuring conservation of energy.
🧠 Quick Revision Questions
- State Faraday's Law mathematically and explain what each symbol represents.
- A 50-turn coil has its area reduced from 0.05 m² to 0.01 m² in 0.1 s in a constant 0.2 T field. What is the average induced EMF?
- Derive the expression for induced EMF when a conducting rod of length L moves with velocity v perpendicular to a uniform magnetic field B.
- Explain Lenz's Law and why the negative sign appears in Faraday's Law.
- In the wire-on-rails example, verify that the electrical power dissipated equals the mechanical power supplied by pulling the wire.