📘 Lecture 37 — PRICING
📖 Overview: This lecture explores how brands can develop premium pricing strategies based on brand strength. It discusses the relationship between brand architecture, customer loyalty, and pricing decisions, emphasizing that strong brands can command higher prices. The lecture provides practical conditions and factors that enable premium pricing.
🗂️ Topics Covered
The lecture begins by introducing pricing as a critical task after positioning and brand architecture are established. It then examines conditions that allow premium pricing, including brand strength and extension strategies. Three key facts about strong brands are presented, showing relationships between brand strength, costs, and pricing. Finally, the lecture explores factors that drive brand loyalty, presented in a graphical hierarchy, concluding that benefits matter more than price for commanding premiums.
📝 Lecture Summary
Introduction
This section introduces the next learning block on pricing. The lecture focuses on developing premium pricing for a brand and the considerations that lay the groundwork for such a model.
Pricing
Once brand positioning, architecture, and leverage plans are in place, the next most important task is determining pricing. Pricing must be done keeping in mind that a brand is an asset providing the right contribution to achieve financial goals. Raising or lowering the price point directly affects contribution margins. Pricing determines the level of value a brand adds to the company. The ideal situation is to command a premium price relative to competition, but realistic market forces must be considered against brand architecture strategy.
💡 Why this matters: Pricing is not just about numbers—it determines whether a brand can generate sufficient profit to meet all financial objectives.
Strong umbrella lets you charge premium
If you are stretching a strong, powerful brand or following an umbrella strategy, you should be set to go for a premium price. The strength of the umbrella brand allows you to charge more because customers already trust and value the parent brand.
Source/endorsing brand strategy also helps premium
Similarly, introducing a new brand under a source brand or endorsing brand strategy allows you to charge a premium price because you leverage existing brand power. However, if you are a new company offering a new brand, premium pricing may be difficult but not impossible—you may co-brand to achieve a decent price point.
Conditions that support premium pricing
Several conditions offer good ground for brands to enjoy premium pricing:
- The stronger the brand, the greater the potential to charge a premium price—customers are willing to spend more on well-established, powerful brands.
- A strong extension (line or brand) sets the stage for a less expensive launch, offering a platform for better margins through lower costs.
- You can recover development and launch costs sooner if your introduction is endorsed by a strong brand—customers are more willing to try a new product under a familiar name, also lowering costs.
- The larger the base of loyal customers, the greater the chances they will pay a premium price—the longer customers stick to a brand, the more they are willing to pay, enhancing brand value.
- A strong brand allows all channel members to make more money faster, offering leadership and control over the channel.
- A strong brand offers opportunities like licensing, franchising, and co-branding, providing value in financial and market terms.
Three facts about strong brands
-
Brand strength, pricing, and costs are related — Their combination allows a healthy bottom line either through charging a premium price or lowering costs.
-
Strong brands offer added benefits and hence premium — Strong brands are superior products offering added benefits. If you are at the top of the value pyramid, there is nothing stopping you from charging a premium price.
-
Brand loyalty brings you premium — Loyalty and premium pricing are related. Maintaining brand loyalty is a prime job of brand managers who must understand the drivers of brand loyalty.
Factors that drive loyalty
Research shows that factors driving loyalty carry weight in a specific order, presented graphically in Figure 42:
🔑 Definition — Drivers of Loyalty (in order of weight): Quality, Dependability, Association, Value for money, Fits personality, Solves problem, Good customer service, Environmentally friendly
The order is significant and convincingly reflects that it is not the price a company should focus on—it is the benefits that must receive managerial concentration. The more a company generates the drivers at the top of the list, the better its chances to charge a premium. The value pyramid concept gains credibility here. The need for consistency from brand picture to contract to positioning to brand architecture and communication is emphasized most at the price juncture.
Pricing must be consistent with product development strategy. A good product offering customers the benefits in the order shown has a great chance to demand premium pricing. This applies to all brands, tangible products and services, regardless of category.
Not all situations are conducive to premium pricing—the right model depends on circumstances, to be discussed in the next lecture.
Summary
The discussion makes one strong point: for a brand to command a premium price or a decent price level, it must make itself strong. Brand managers should consider brand architecture from multiple standpoints of market acceptance, lower costs, and better pricing. The stronger the brand, the better the price it commands. Brand loyalty is the strongest ingredient of premium price—customers accept premium pricing if they are loyal. Loyalty is a function of factors rated in order of preference, and managers should work to strengthen those factors for good pricing to fall in place.
⭐ Key Takeaways
Pricing is a critical task that determines a brand's contribution margins and value to the company. A strong brand—whether through umbrella, source, or endorsing strategies—provides the foundation for charging premium prices. The three key facts are that brand strength relates to both pricing and costs, strong brands offer superior benefits justifying premium, and brand loyalty directly enables premium pricing. The most important driver of loyalty is quality, followed by dependability and association—not price. Therefore, brand managers must focus on delivering superior benefits and building loyalty rather than competing on price, as consistency across all brand elements from development to communication is essential for premium pricing success.
🧠 Quick Revision Questions
- What are the three key facts about strong brands presented in the lecture, and how do they relate to premium pricing?
- List the six conditions that support premium pricing for a brand.
- According to the lecture, what is the most important driver of brand loyalty, and why does this matter for pricing strategy?
- How do umbrella strategy and endorsing brand strategy enable premium pricing?
- What does the lecture say about the relationship between brand strength, costs, and pricing, and how does this affect the bottom line?
📘 Lecture 38 — PRICING
📖 Overview: This lecture explores how brands can be priced effectively under different market conditions. It contrasts two fundamental pricing philosophies—market-based pricing and cost-based pricing—and explains the specific strategies, contexts, and trade-offs associated with each. Understanding these models is essential for setting a price that delivers both customer value and company profitability.
🗂️ Topics Covered
The lecture begins by grouping pricing models into two bases: market-based pricing and cost-based pricing. Under market-based pricing, it covers skim pricing, value-in-use pricing, segment pricing, strategic account pricing, and plus-one pricing. Under cost-based pricing, it explains floor pricing, cost-plus pricing, penetration pricing, and harvest pricing. The lecture concludes with practical guidelines for choosing between the models based on differentiation, contribution, and perceived value.
📝 Lecture Summary
Introduction
We have seen how a premium pricing model works, but not all situations are conducive to charging a premium. Not all companies at all times can charge a premium or a decently high level of pricing. There are different models that cope with different situations, and this lecture attempts to explain those. The pricing models are grouped into two pricing bases: market-based pricing and cost-based pricing.
Market-based pricing
Market-based pricing starts with the customer, competition, and company positioning. Keeping in view customer needs, price sensitivity, and competing products, a price is worked out to offer customers a superior value. The price is worked out in the market. This pricing model is just not possible without having a focus both on customer needs and competition (market intelligence). Concentration on one to the exclusion of the other is not going to enable you to come up with the right price. Price, under this model, is set in the market and not internally within the marketing and finance departments.
Market-based pricing can be executed with different strategies relating to the product life-cycle stage:
Skim Pricing: It works under the circumstances of high differentiation that gives you a sustainable advantage in a quality-conscious market. The business charges a premium for delivering superior customer value until competition catches up.
Value-in-use Pricing: This model applies to consumer durables or industrial products that stay with customers for a certain period. From the time the product is bought to the time of the completion of its life-cycle, customers have to incur certain costs (installation, maintenance, resale). If customers perceive that the economic benefit they get from buying such a product is higher than that of competition, they will be willing to pay a premium for your product. Examples are air conditioners and cars. Customers will pay more for brands they think offer them better value-in-use.
Segment pricing: One of the goals of segmentation is market-based pricing. Different customers in different segments have different product needs and different pricing priorities and sensitivities. This model offers the opportunity to set different levels of pricing for different needs. An example could be different packages offered by cell phone companies. The concept of economic value remains in force while working out pricing for products belonging to different segments.
Strategic Account Pricing: Large customers are important to any business and are taken in a strategic light. The underlying assumption is always to maintain a long-term relationship with such customers, with a focus on meeting their needs. To maintain the strategic relationship, you may offer a special price to such customers, while general prices are on the higher side. By the same token, you may also make them pay you higher prices, while the overall conditions generally slacken and prices fall. Since the objective is to serve the customers with a long-term perspective, offering them economic value that surpasses the one offered by competition, the model works well.
Plus-One pricing: This model applies in mature market conditions, in which all products carry good benefits for customers. For those brands that are bent upon differentiating themselves, they position themselves as a “plus-one” brand. A “plus-one” position allows the business to charge a market-based premium price on the basis of that one feature which competition does not offer. Examples are Volvo for safety, BMW and Lexus for performance, and Mercedes for overall reputation of performance, luxury, and dependability.
What is important is an understanding of all the cost drivers and the full value of the product. Realizing the full value of the product that the customer perceives may offer an opportunity to charge more than what the traditional cost-based mechanism may present. Attention to product benefits and value for the customer enable you to charge more, earn more, and achieve more.
Cost-based pricing
Cost-based pricing is adding your desired margin to the actual cost, and then adding a margin for every member of the channel to arrive at the final selling price. Most businesses engage in cost-based pricing for their products. You may end up doing that, but you must not start with that. A cost-based model starts at the company with manufacturing costs in view. Desired margin is added, and the product goes through successive channels with the same mechanism of added margins at every stage until it reaches the customer with the final price. This pricing is applied mostly in markets where differentiation is minimal.
Floor pricing: As the name suggests, it is the lowest possible price a company can charge. As a means for achieving certain financial objectives like margins or return on investment, companies set benchmarks for themselves (e.g., "we have to have 20% margin"). Such pricing is not a reflection of the reality of the market; it is a benchmark that indicates that at the established price, the company will remain a viable concern by achieving its basic goals. It should be avoided.
Cost-plus pricing: This is what is generally referred to as cost-based pricing. It is essentially mark-up based. A mark-up is added at every stage of the cost. The channel works on this basis, and the final price is the consumer price. What is important for businesses is to increase their volumes and lower their costs at the manufacturing end. Reduced costs mean higher margins. However, the margins to other members of the channel should stay the same.
Penetration pricing: This model is applicable in situations of growth. You want to increase your volume, and in a bid to do that, you lower the price. High volumes bring costs down. This model is workable in markets with minimal differentiation, price sensitivities, a large number of manufacturers, a large number of substitutes, and easy entry. The one with the highest volume and share is in a position to cause a shake out and discourage new entrants from coming in.
Harvest pricing: This model applies to products at the decline stage when volumes are falling. You increase the price and try to reap higher margins on costs. When volumes further slide, margins compensate for that until the product fades away and makes way for another one.
We have seen that market-based pricing starts with the market, competitive situation, and product positioning, and from there it works backward to arrive at margins. Cost-based pricing starts from the company and reaches its final stage by adding mark-ups at every stage of the chain. It is wonderful to command a premium price and make more margins, but volumes may not be that high. Conversely, it is prudent to follow a conservative approach that generates benchmarks for the company to charge prices almost bare minimum. But then, you may be grossly under-pricing and denying yourselves the opportunity of charging the right price.
There is no one answer to a variety of situations. However, following are a few guidelines:
Differentiation: Level of differentiation does offer guidance. Market-based model for differentiated products and cost-based model for those with minimum differentiation seems to be one guideline.
Touch both the bases: Within the generalized guidelines, you should look into the positive aspects relating to both bases while pricing your brands.
Don’t forget contribution: One important factor is that of total contribution. You have to arrive at a combination of volume and margin that increases the business’s total contribution.
High volume and low price affect contribution negatively: Going for high market share and high volumes at the cost of price may not be a good strategy, for it affects contribution negatively. However, if there is a pressing argument for doing so, then consensus among marketing and other colleagues must be achieved.
Assess the perceived value: The perceived value your brand offers must neither be over-estimated nor under-estimated.
Stay within the mainstream price: Customers will never pay a price they think is beyond what they assess as the added-value your brand carries. Staying within the mainstream price is the answer. Try to see how close or far off that is from both models and what kind of contribution that offers.
Summary
Both models have their attractions and distractions. The objective should be to come up with the optimal level of pricing that offers the brand value and the company decent profitability. Based on your brand vision, you must come up with the model most compatible with it.
⭐ Key Takeaways
- There are two fundamental pricing bases: market-based pricing (starting with the customer/competition) and cost-based pricing (starting with internal costs and adding mark-ups). The choice of model depends heavily on the level of product differentiation and the market context.
- Market-based strategies include skim pricing (for highly differentiated products), value-in-use pricing (for durables), segment pricing, strategic account pricing, and plus-one pricing (for mature markets). Cost-based strategies include floor pricing, cost-plus pricing, penetration pricing (for growth), and harvest pricing (for decline).
- The critical metric to manage is total contribution, which is a combination of volume and margin. A pricing decision that grows volume by lowering price may not always increase contribution; the trade-off must be evaluated carefully.
- Perceived value must be assessed accurately—neither over-estimated nor under-estimated. Customers will only pay a price they believe reflects the added-value the brand provides, so staying within the mainstream price range is a sensible guideline.
- There is no single "right" answer. The optimal pricing decision should balance brand vision, market reality, and financial objectives, and it often requires consensus across marketing and other functions.
🧠 Quick Revision Questions
- What is the fundamental difference between market-based pricing and cost-based pricing in terms of where the pricing process begins?
- Under what specific market conditions is a penetration pricing strategy most effective, and what is its primary goal?
- Explain how the "plus-one pricing" model works and give two examples of brands that employ this strategy.
- Why is "floor pricing" generally discouraged, and what is its main limitation?
- According to the lecture's guidelines, what is the most important financial factor to consider when combining volume and margin in a pricing decision?
📘 Lecture 39 — Return on Brand Investment – ROBI
📖 Overview: This lecture introduces the concept of Return on Brand Investment (ROBI) as a framework for measuring brand performance beyond traditional financial metrics. It explains the strategic importance of tracking brand health through the Young & Rubicam brand dynamics model and its four key dimensions, along with specific performance measures to ensure brand strategies are delivering value.
🗂️ Topics Covered
The lecture begins by defining ROBI and explaining why measuring brand performance is essential alongside financial measures. It introduces the Y&R Brand Dynamics Model with its four factors: Differentiation, Relevance, Esteem, and Knowledge, showing how they combine into Brand Strength and Brand Stature constructs. It then details specific performance measures under Differentiation (awareness/recognition, persona recognition, contract fulfillment), Relevance (market share, purchase frequency, customer satisfaction, brand-driven penetration, quality perception, brand-driven customer acquisition), and briefly touches on Esteem and Knowledge variants.
📝 Lecture Summary
Introduction
All strategic moves—from brand picture to positioning to channels to communication—require investment. If these formulations are put right, the result is brand value and profitability. To what extent the strategies in place are giving return on brand investment should be measured so adjustments can be made whenever and wherever required.
Return on Brand Investment – ROBI
The basic idea of ROBI is to measure brand’s performance. To manage your brand well, you must measure its movement in terms of changing preferences and loyalties. The most important challenge is to see that loyalty to the brand does not erode, for it is one basic measure of keeping your customers, bringing in new ones, and keeping them loyal.
Different measures are employed to gauge strategic movement and growth, offering insights into:
- Whether overall strategic movement is according to strategic plans
- Any changes required in adjusting or strengthening brand position
- Adjusting or reinforcing communication plans for consistent focus
- Provision of resources in a more effective way
- Identifying brand strength and potential growth areas within and across categories (line or brand stretch)
Why measure performance?
It can be argued that in the presence of accounting measures like revenues, margins, and returns, why measure brand’s performance? Beneath the surface of accounting and other statistical figures are strategic factors that cause subtle changes to brand’s movement over time. It becomes important to track such changes to make right decisions and adjust tactical moves. In other words, we measure financial results on one hand, and strategic factors that cause those results on the other.
💡 Why this matters: Financial measures tell you what happened; strategic measures tell you why it happened and what to do next.
Brand Dynamics
There is a cause-and-effect relationship between strategic factors and financial measures. The strategic factors according to the Young & Rubicam (Y&R) brand equity model are:
- Differentiation
- Relevance
- Esteem
- Knowledge
According to this model, brands are built sequentially according to these four factors.
Differentiation comes first—no brand with ambitions can become strong unless it has a point of real differentiation. It is the bottom-line characteristic of any brand that seeks to acquire price premium or a decent price with good margins.
Relevance means a brand must have clear meaning for its users. Unless it is relevant for the target market, it will not be bought, despite being much differentiated.
🔑 Definition — Brand Strength: A function of differentiation multiplied by relevance.
If a brand has differentiation and is highly relevant for a big market, it becomes a big seller and very strong.
Esteem refers to perceived quality and a rise or decline in popularity. Customers loyal to their brands hold them in high esteem owing to quality perceptions. Esteem has a direct relationship with loyalty.
Knowledge illustrates that customers are not only aware of the brand and its product, but also understand the reason for this product’s existence. They are aware of its positioning and have a true understanding of the brand—the height of the brand building process.
The four dimensions form two constructs:
- Construct 1 (Brand Strength): Differentiation × Relevance
- Construct 2 (Brand Stature): Esteem × Knowledge
The four dimensions have further variants. Performance and subtle changes caused over time stem from these dimensions. Starting with awareness, recognition, and recall, these dimensions end with referral index. These measures are carried out alongside routine financial results to complete a balanced brand-building process. They require researching across a representative sample of customers.
On the Differentiation Dimension
Awareness and recognition: Customer’s ability to recall and recognize the brand as a distinct identity reflects brand’s strength. The more differentiated a brand is, the easier the recall and recognition. Awareness and recognition play a dominant role in building brand equity. Recall and recognition should go beyond just measuring the level of recall—it must provide relevant data that can be related with other variables to gauge strategic implications. Importance should also be given to symbols and imagery, as they cannot be separated from the brand name when evoking recall.
Persona recognition: This measures the extent to which your brand is consistent with its persona. It tells whether the brand persona developed by you is being received at the customer end the way it was intended! It should be judged by the degree to which customers perceive receiving the benefits and developing emotional associations with your brand. You must devise a questionnaire intended to evoke correct and objective responses, then compare results with your original persona. Any variations detected must be taken care of. If you intended to create a persona of a dependable, friendly, informal brand and results are contrary, adjustments must be made in quality, packaging, visual parts, symbols, or communication.
Contract fulfillment: This measures the extent to which the brand upholds the contract—are all promises being delivered? It gives a straightforward report on how much your brand is keeping all promises made with customers. If customers are satisfied that whatever they think should be delivered is being delivered, you are keeping the contract. Any breaches dictate that you must repair the contract and win over customers' confidence. Unavailability or erratic availability reflects flaws in distribution or logistics. Not being able to supply through direct marketing or compromising quality are also breaches. Conversely, fulfillment builds trust, which creates loyalty and starts a process of gaining new customers continuously.
On the Relevance Dimension
Market share: This measure gives a clear picture of the number of customers or usage of your brand in comparison with competition.
Purchase frequency: This measure gives the number of times your customers buy your brand. Your objective becomes, "how can I have these customers buy more every time they buy?"
Customer satisfaction: This provides a rating on the degree of satisfaction with your brand and shows how willing customers are to stick to your brand.
Brand-driven penetration: This measure is used on line and brand extensions. It tells how many existing customers have chosen to buy products and services that are an extension of your existing brand. It confirms or does not confirm the extendibility of your brand by giving proof of how willing customers are to go with you on extensions—a measure of how rational you are in devising product strategies.
Quality perception: A measure of satisfaction with your brand showing quality comparisons with competitors on scales such as:
- High quality vs. shoddy quality
- Best in the category
- Consistent quality
Brand-driven customer acquisition: This reflects the number of new customers gained compared with a preceding period (e.g., one year). For consumer durables like TVs, it is straightforward. For consumables in big quantities, you can draw bases of consumption in relation to population served (e.g., per person, per family). The challenging part is to determine, through questions to respondents, what drives them to make buying decisions, what is making them leave your brand, and for what reasons.
⭐ Key Takeaways
The most critical concept is that ROBI measures brand performance through strategic factors that cause financial results, not just the results themselves. The Y&R Brand Dynamics Model provides a sequential framework: Differentiation builds Relevance, which together create Brand Strength; Esteem builds Knowledge, which together create Brand Stature. Specific measures under each dimension—such as awareness/recognition, persona recognition, contract fulfillment (for differentiation), and market share, purchase frequency, customer satisfaction, penetration, quality perception, and customer acquisition (for relevance)—allow managers to track brand health and make adjustments. Ultimately, these strategic measures must be researched through representative customer samples and used alongside financial data for a balanced, complete view of brand performance.
🧠 Quick Revision Questions
- What are the four dimensions of the Y&R Brand Dynamics Model, and in what sequential order are brands built according to this model?
- How is Brand Strength defined, and which two dimensions form its construct?
- What is the difference between Awareness/Recognition and Persona Recognition as measures of performance?
- List at least four measures under the Relevance dimension and explain what each measures.
- Why is it important to measure brand performance through strategic factors in addition to financial accounting measures?
📘 Lecture 40 — Brand Dynamics
📖 Overview: This lecture completes the discussion of the four dimensions of brand strength by focusing on measures for esteem and knowledge. It explains how to evaluate customer loyalty, price premium, and positioning understanding, and emphasizes the importance of using strategic measures alongside financial metrics to manage a brand effectively.
🗂️ Topics Covered
The lecture covers measures on the dimension of esteem, including customer loyalty, price premium/financial brand value, and lifetime value of a customer. It then addresses measures on the dimension of knowledge, specifically positioning understanding and referral index. Finally, it discusses the importance of these measures in adversity and normal conditions, and how they create a balanced method for measuring brand performance.
📝 Lecture Summary
Introduction
This lecture continues the discussion on measures of variants of the remaining two dimensions, esteem and knowledge, building on the understanding of differentiation and relevance from previous lectures.
On the dimension of esteem
Customer loyalty: This measure shows how consistent customers are in buying your brand, how long they have been buying, and how long they may continue to buy. This measure should tell you the number of customers that you would have lost had you not had the branding strategies. It also tells you that the customers who did not leave your brand are loyal customers.
You ask your customers what other brands they considered before finally deciding to stick to your brand. You can find out the competitive brands that entered your customers’ decision-set. The next question should clarify why they stuck to your brand after considering competition and then discarding it. You will get yet another testimony to your product’s quality and branding strategies.
🔑 Definition — Customer loyalty: The degree to which customers consistently purchase your brand over time, often measured by retention and resistance to switching.
Price premium/Financial brand value: This shows you why your customers are willing to pay you a premium over your competitors or a price that offers you a good, attractive margin. This also is an important measure in determining the right price premium for your brand.
You compare the price of your brand with your immediate competition and determine to what extent you can further go up in price, thus following the market-based pricing mechanism.
The measure gives you insights into:
- Going for the right premium
- Adjusting your pricing upwards, even if you do not charge a premium, to ensure you have the right margins
- Cutting your costs wherever you can to improve your margins
🔑 Definition — Price premium: The extra amount customers are willing to pay for a brand compared to its competitors, reflecting perceived brand value.
Lifetime value of a customer: It lets you have your loyal customer’s lifetime worth in terms of your brand’s purchasing.
🔑 Definition — Lifetime value of a customer: The total net profit a brand can expect to earn from a customer over the entire duration of their relationship.
On the dimension of knowledge
Positioning understanding: This measure tells you to what extent customers understand the way you have positioned your brand. Any gaps between your message and understanding of the target market will raise questions for correction.
A similarity of message and reception of it by the market is a testimony to the right positioning and, hence, leveraging of the brand. It is one of the most important measures for the simple reason that differentiation and segmentation come to life if a position is rightly occupied in the minds of your consumers. To what extent customers understand your positioning and own it tells you the level of success that you have achieved from your branding effort.
If you positioned your brand from the taste and quality platform, then it has to be perceived so in the market. Conversely, if it is perceived more as a price-friendly brand, then the perception needs to be changed. This perception may hinder your efforts to go for a price increase, for customers may take it for granted that your price will never be out of their perception range. That will be a big constraint for you. If, however, the right positioning is taking hold, then you will be free of that constraint and can charge a premium or a price that offers a high level of margin.
There is a straight line relationship between quality perception and premium pricing. Perception of high quality and taste will also enable you to make your customers stick to your brand and attract new customers through referrals. In short, a complete understanding on part of the customers about your brand’s inner core and character testifies that your position is well understood by them.
🔑 Definition — Positioning understanding: The degree to which the target market perceives the brand exactly as intended by the brand’s positioning strategy.
📌 Example: If a brand is positioned on taste and quality, but the market perceives it as price-friendly, this gap requires corrective action. A price-friendly perception may prevent the brand from raising prices, while correct quality perception enables premium pricing and customer loyalty.
Referral index: It pinpoints the potential to create new business/customers owing to referrals by satisfied and loyal customers on the basis of their knowledge of the brand.
🔑 Definition — Referral index: A measure of a brand’s ability to generate new customers through referrals from existing satisfied and loyal customers.
The importance of measures
The importance of such measures comes to the surface under two sets of circumstances:
- In adversity, when sales start slipping, market share eroding, and management having no choice but making desperate decisions as quick fixes.
- In less difficult conditions, where the brand’s potential is not being fully harnessed, leaving much to be desired. You realize this mostly in hindsight.
According to experts, these measures along with financial measures create a balanced method of measuring a brand’s performance. The challenge therefore is to use these measures to supplement the financial measures. However, it is not important to go for all the measures that are discussed. You can pick a few that are relevant to your strategic situation and then see with confidence that your brand is moving the way it was planned. If not, then make relevant changes before damage is done.
Such an approach ensures that brand building efforts are not compromised and you can:
- Maintain your brand position – an extremely important dimension that drives all marketing strategies.
- Preempt most of the damages that could be caused by not addressing the strategic factors.
- Further consolidate your brand position by ensuring that all brand strategies are taking hold.
- Stay focused in maintaining your brand picture. It helps you eliminate any gaps between the picture you have created and the actual image.
- Determine the impact of your strategies on retaining loyal customers. Loyal customers give referrals of your brand to others and create more customers.
- Use the result of your branding efforts toward creating new customers, creating new extensions.
- Achieve an overall picture of the qualitative returns you are getting on the money you are investing into brand-building.
💡 Why this matters: Measuring strategic dimensions alongside financial results ensures early detection of problems and prevents the need for desperate quick fixes when sales or market share decline.
Summary
Measuring performance of your brand means you are managing your brand right. Measurement comes in the form of your monthly, quarterly, and annual returns on investments and revenues, but it has to be supplemented with measurements of your strategies.
Strategies cause financial results and therefore must be measured to see if there are any changes required toward tactical adjustments. The need for tactical adjustments keeps you alert and timely action ensures that the financial results that you are posting continue improving.
A time may come when financial results take a turn for the negative if strategies are left to chance and you lose control of their implications. The strategic implications are demonstrated in four different macro dimensions: differentiation, relevance, esteem, and knowledge.
These dimensions translate themselves into so many different variants that allow us an opportunity to measure them and see whether or not we are on the right path. If we are not, then we make adjustments and the process goes on.
There could be so many different measures. You should not always follow a rigid checklist of measures. Be sensitive to variables that affect your results and strategies under a particular set of circumstances. Relating those variables with your circumstances, you should decide which measures to go for – market share, loyalty, pricing, brand image recognition, positioning, or any other.
⭐ Key Takeaways
Measuring brand performance requires supplementing financial metrics with strategic measures from the four dimensions of brand strength: differentiation, relevance, esteem, and knowledge. On the esteem dimension, customer loyalty reveals retention, price premium indicates willingness to pay more, and lifetime value captures long-term customer worth. On the knowledge dimension, positioning understanding checks alignment between intended and perceived brand image, while the referral index measures word-of-mouth potential. Managers should select only those measures relevant to their strategic situation rather than using a rigid checklist, ensuring they can detect and correct problems before financial results decline. Ultimately, these strategic measures protect brand position, preempt damage, consolidate strategies, and provide a qualitative picture of returns on brand-building investment.
🧠 Quick Revision Questions
- What two sets of circumstances highlight the importance of strategic measures for brand performance?
- How does the "positioning understanding" measure help a brand, and what is the relationship between quality perception and premium pricing?
- What three insights does the "price premium/financial brand value" measure provide to a brand manager?
- According to the lecture, what is the key challenge in using strategic measures alongside financial measures?
- What does the "referral index" measure, and how is it related to customer loyalty and brand knowledge?