๐ Lecture Summary
Weighted Moving Average
The weighted moving average assigns different weights to past data points, with more recent periods typically receiving higher weights. The formula accounts for varying importance of historical data.
๐ Definition โ Weighted Moving Average: A forecasting method where each historical data point is multiplied by a specific weight, with weights summing to 1, giving more importance to recent observations.
๐ Formula: Ft = w1At-1 + w2At-2 + w3At-3 + ... + wnAt-n / n where โwi = 1 โ The forecast equals the sum of each weight multiplied by its corresponding past actual value, divided by the number of periods.
๐ Example: Given weekly demands of 650, 678, and 720 for weeks 1-3 with weights t-1=0.5, t-2=0.3, t-3=0.2: F4 = 0.5(720) + 0.3(678) + 0.2(650) = 360 + 203.4 + 130 = 693.4 Note: More weightage is given to recent most values.
๐ Example 2: Given demands 820, 775, 680, 655 for weeks 1-4 with weights t-1=0.7, t-2=0.2, t-3=0.1: F5 = (0.1)(775) + (0.2)(680) + (0.7)(655) = 77.5 + 136 + 458.5 = 672 Note: More weightage is given to recent most values.
๐ก Why this matters: Weighted moving averages allow forecasters to emphasize recent trends while still considering historical patterns, making them more responsive to recent changes than simple moving averages.
Exponential Smoothing Model
Exponential smoothing is a forecasting technique that uses a smoothing constant alpha (ฮฑ) to weight the most recent forecast error. The model updates forecasts by adding a proportion of the previous error.
๐ Definition โ Exponential Smoothing: A time series forecasting method that uses a weighted average of past observations, with weights decaying exponentially as observations get older.
๐ Formula: Ft = Ft-1 + ฮฑ(At-1 - Ft-1) Where:
- Ft = Forecast value for the coming time period
- Ft-1 = Forecast value in 1 past time period
- At-1 = Actual occurrence in the 1 past time period
- ฮฑ = Alpha smoothing constant
๐ Example 1: Weekly demand data with ฮฑ=0.10 and ฮฑ=0.60, assuming F1=D1=820:
| Week | Demand | ฮฑ=0.1 Forecast | ฮฑ=0.6 Forecast |
|---|---|---|---|
| 1 | 820 | 820.00 | 820.00 |
| 2 | 775 | 820.00 | 820.00 |
| 3 | 680 | 815.50 | 793.00 |
| 4 | 655 | 801.95 | 725.20 |
| 5 | 750 | 787.26 | 683.08 |
| 6 | 802 | 783.53 | 723.23 |
| 7 | 798 | 785.38 | 770.49 |
| 8 | 689 | 786.64 | 786.99 |
| 9 | 775 | 776.88 | 728.20 |
| 10 | 776.69 | 756.28 |
๐ Example 2: Calculating exponential smoothing with ฮฑ=0.5, F1=D1=820: F2 = 820 + 0.5(820 - 820) = 820 F3 = 820 + 0.5(775 - 820) = 797.75
๐ Example 3: Demonstrating different alpha values:
| Period | Actual | ฮฑ=0.1 Forecast | Error | ฮฑ=0.4 Forecast | Error |
|---|---|---|---|---|---|
| 1 | 42 | ||||
| 2 | 40 | 42 | -2.00 | 42 | -2 |
| 3 | 43 | 41.8 | 1.20 | 41.2 | 1.8 |
| 4 | 40 | 41.92 | -1.92 | 41.92 | -1.92 |
| 5 | 41 | 41.73 | -0.73 | 41.15 | -0.15 |
| 6 | 39 | 41.66 | -2.66 | 41.09 | -2.09 |
| 7 | 46 | 41.39 | 4.61 | 40.25 | 5.75 |
| 8 | 44 | 41.85 | 2.15 | 42.55 | 1.45 |
| 9 | 45 | 42.07 | 2.93 | 43.13 | 1.87 |
| 10 | 38 | 42.36 | -4.36 | 43.88 | -5.88 |
| 11 | 40 | 41.92 | -1.92 | 41.53 | -1.53 |
| 12 | 41.73 | 40.92 |
Common Nonlinear Trends
Nonlinear trends include parabolic (concaved upwards and downwards with widening arms, representing a quadratic function), exponential, and growth patterns. These trends cannot be adequately captured by simple linear models.
Linear Trend Equation
The linear trend equation uses time as the independent variable to forecast future values with a straight-line pattern.
๐ Definition โ Linear Trend Equation: Ft = a + bt Where:
- Ft = Forecast for period t
- t = Specified number of time periods
- a = Value of Ft at t = 0
- b = Slope of the line
๐ Formula for calculating b: b = [nโ(ty) - โtโy] / [nโtยฒ - (โt)ยฒ]
๐ Formula for calculating a: a = (โy - bโt) / n
๐ Example: Linear trend calculation with 5 weeks of sales data: b = [5(2499) - 15(812)] / [5(55) - 225] b = (12495 - 12180) / (275 - 225) = 315 / 50 = 6.3
a = [812 - 6.3(15)] / 5 = (812 - 94.5) / 5 = 717.5 / 5 = 143.5
Result: y = 143.5 + 6.3t
Associative Forecasting
Associative forecasting uses predictor variables to predict values of the variable interest. It employs regression as a technique for fitting a line to a set of points. The least squares line minimizes the sum of squared deviations around the line.
Forecast Accuracy
Forecast accuracy is measured using:
- Error: Difference between actual value and predicted value
- Mean Absolute Deviation (MAD): Average absolute error
- Mean Squared Error (MSE): Average of squared error
- Mean Absolute Percent Error (MAPE): Average absolute percent error
Simple Linear Regression Formulas
๐ Formulas for calculating "a" and "b" in simple linear regression:
- a = yฬ - bxฬ
- b = [โxy - n(yฬ)(xฬ)] / [โxยฒ - n(xฬ)ยฒ]
๐ Problem Data: Predicting sales in future weeks:
| Week | Sales |
|---|---|
| 1 | 150 |
| 2 | 157 |
| 3 | 162 |
| 4 | 166 |
| 5 | 177 |
Calculation table:
| Week (x) | xยฒ | Sales (y) | xy |
|---|---|---|---|
| 1 | 1 | 150 | 150 |
| 2 | 4 | 157 | 314 |
| 3 | 9 | 162 | 486 |
| 4 | 16 | 166 | 664 |
| 5 | 25 | 177 | 885 |
| Sum: 15 | 55 | Avg: 162.4 | 2499 |
b = [2499 - 5(162.4)(3)] / [55 - 5(9)] = 63 / 10 = 6.3 a = 162.4 - (6.3)(3) = 143.5
The resulting regression model is: Yt = 143.5 + 6.3x
โญ Key Takeaways
Weighted moving averages allow differential emphasis on historical data by assigning weights that sum to one, with recent periods typically receiving higher weights. Exponential smoothing uses an alpha constant to balance responsiveness and stability, where lower alpha values produce smoother forecasts and higher values react more quickly to changes. The linear trend equation (Ft = a + bt) provides a straightforward method for forecasting when data follows a linear pattern, while nonlinear trends require more complex modeling approaches. Associative forecasting through simple linear regression uses predictor variables and least squares methodology to establish cause-and-effect relationships. Forecast accuracy must be evaluated using MAD, MSE, and MAPE to ensure reliable predictions for production planning decisions.
๐ง Quick Revision Questions
-
Calculate the weighted moving average forecast for week 5 using demands of 820, 775, 680, 655 with weights 0.7, 0.2, and 0.1 respectively.
-
What is the exponential smoothing forecast for period 4 with ฮฑ=0.6 if F1=820 and demands are 820, 775, 680 for periods 1-3?
-
Using the linear trend equation y = 143.5 + 6.3t, what is the forecast for week 6?
-
How does changing the alpha value from 0.1 to 0.6 affect the exponential smoothing forecast's responsiveness to actual demand changes?
-
What are the three main measures of forecast accuracy discussed in this lecture, and how do they differ in their calculation?
๐ Lecture 11 โ PRODUCT & SERVICE DESIGN
๐ Overview: This lecture initiates the study of Design of Productive Systems, focusing on the critical role of product and service design in operations management. It explains how products and services are inseparable and must be designed together to achieve organizational goals, customer satisfaction, and competitive advantage.
๐๏ธ Topics Covered
The lecture covers the importance of product/service design and its strategic role, major factors in design strategy (cost, quality, time-to-market, customer satisfaction, competitive advantage), and the specific design activities organizations must follow. It then explores reasons for design (economic, social, legal, competitive, technological), objectives of design, and the seven steps in the design process including motivation, customers, R&D, competitors, demand forecasting, manufacturability, and general considerations. Finally, it addresses legal, ethical, and environmental issues, product liability, and guidelines designers must adhere to for successful design.
๐ Lecture Summary
Introduction
After completing lectures on product and service design, we will understand its importance and grasp the various important aspects of the design process in detail. We will cover the concept of standardization and its advantages/disadvantages. We should appreciate the contribution of R&D to product/service design. Finally, we will focus on the concept of Reliability to learn how we can aid our organization in improving its product or serviceโs reliability.
Importance of Product/Service Design
Product/Service design plays a strategic role in helping an organization achieve its goals. A good product/service design can ensure customer satisfaction, quality, and production costs. On the other hand, if an organization offers a poor product or service, customer feedback in the form of lack of interest will result in poor sales. Also, quality and production costs are affected by poor design. The importance is often overlooked, as Pakistani organizations have not yet learned to pay attention to safe operations of their products or services. A poor product or service can endanger customersโ lives. As Operations Managers, we must question the safe operations of our organizationโs offerings and safeguard our organization from product or service liability.
Major factors in design strategy
When we design a product or service, we need to consider the following facts in our design strategy:
- Cost
- Quality
- Time-to-market
- Customer satisfaction
- Competitive advantage
A good product or service can be produced or delivered at an economical cost with increased quality, with less time to market, provided the organization is willing to aim for customer satisfaction. This most of the time results in competitive advantage as well as an increase in revenues.
๐ก Why this matters: These five factors form the foundation of any design decision โ trade-offs between them directly impact business success.
Product or Service Design Activities
When an organization decides to design a new product/service or refine an existing one, it must follow these activities religiously and diligently:
- Translate customer wants and needs into product and service requirements
- Refine existing products and services
- Develop new products and services
- Formulate quality goals
- Formulate cost targets
- Construct and test prototypes
- Document specifications
An organization can initiate design if it understands what the customer actually wants. For example, a customer wants a fuel efficient car; if the automobile manufacturer refines its existing product to improve quality and reduce costs, it can gain competitive advantage and profits. This requires constructing a prototype, evaluating performance for robustness, and documenting specifications in detail so the product can fulfill its intended use throughout the country (e.g., a CNG fitted car should function effectively in Karachi, Lahore, Islamabad, and hilly northern areas).
Reasons for Product or Service Design
An organization takes into account both external and internal reasons to design a new product/service or redesign an existing one:
- Economic
- Social and demographic
- Political, liability, or legal
- Competitive
- Technological
What is important: whether itโs a single reason or multiple reasons, the end result should always be an improved, safe, and reliable product that brings revenue and competitive advantage.
Objectives of Product and Service Design
The primary focus is Customer satisfaction, with secondary focus being:
- Improved function of product/service
- Increase in revenues/profits
- Quality along with reduction in costs
The current trend is to pay special attention to the product or serviceโs visual appearance, ease of production/assembly, and ease of maintenance/service. However, the design department must take into account the capabilities of the organization in designing goods and services.
Steps in the Design Process
Most organizations follow these steps (not necessarily in the same order):
-
Motivation: Refers to achieving organizational goals. For mature organizations, motivation also includes government regulations (new incentives, tax-free zones), competitive pressure, customer needs, and appearance of new technologies with product/service applications.
-
Customers: The design process would never be complete without valuable customer inputs. Any organization that fails to satisfy customer requirements loses ground to competitors.
-
R&D: Refers to Research and Development departments/divisions that generate new ideas for existing products/services or new ideas for new products/services. Activities are ITERATIVE and employ feedback from customers as well as operations.
-
Competitors: The design process often compels a company to dismantle and inspect a competitorโs product โ this is called REVERSE ENGINEERING. This helps the organization improve its own product. Companies often get blamed for incrementally improving competitorsโ product designs or features to win competition.
-
Forecast Demand: Refers to the demand for the company's new product or service.
-
Manufacturability: Means the ease of fabrication or assembly of a product, as it directly affects cost, quality, and productivity.
-
General considerations: Requires design, production/operations, and marketing departments to work closely together โ sharing customer feedback, quality issues, and operations bottlenecks. Legal/regulatory issues and Product Life Cycle issues must also be addressed.
Legal, Ethical, and Environmental Issues
Organizations must operate within a three-dimensional framework of legal, ethical, and environmental boundaries:
-
Legal: Operations Managers must understand the legal environment โ governmental regulations (federal, provincial, district) and industrial/service sector obligations. These guidelines must be followed.
- FDA, OSHA, CRS: Legal issues where even the CEO can be implicated for violations regarding pollution. FDA = Federal Drug Agency, OSHA = Occupational Safety Hygiene Administration, CBR = Center Board of Revenue (monitors taxable income).
- Product liability: A manufacturer is liable in case of injury or damages caused by a faulty product.
- Uniform commercial code: Products carry an implication of merchantability and fitness โ a product must be usable for its intended purpose. For example, a manufacturer of electricity cable must produce a uniform product; otherwise it can lead to electric shock to the end user.
-
Ethical: Operations Managers are under contractual agreement not to exhibit unethical behavior. Releasing products with defects should be informed to customers. This is a golden practice amongst Muslims from the days of Holy Prophet (PBUH), and it's heartening to see it employed in International Business.
-
Environmental: Operations Managers must work within the same environmental laws as their organization. EPA (Environmental Protection Agency) is active in all countries including Pakistan โ even a CEO can be jailed for failure to comply. It is the design sideโs responsibility to ensure no design is finalized that can seriously jeopardize the organizationโs standing towards the environment.
Designers of Product/Service should adhere to Guidelines
The design side must adhere to guidelines ensuring the organization achieves its strategy:
-
Produce designs consistent with company goals: An economical upscale model automobile design replaced with a luxurious model can invite a small number of customers and may lose the existing stronger customer base.
-
Give customers the value they expect: Reliability, safety, endurance, aesthetic, and quality dimensions are what customers are looking for.
-
Make health and safety a primary concern: Green Rickshaws seen functioning on the roads these days are a result of taking care of health and safety of users and operators.
-
Consider potential harm to the environment: A new product should be better than the existing one and aid in environmental protection. Many automobile manufacturers use hybrid models, and steam-operated cars may be available in 5 years.
โญ Key Takeaways
Product and service design is a strategic activity that directly impacts customer satisfaction, quality, costs, and competitive advantage. Organizations must follow a systematic design process involving customer input, R&D, competitor analysis, and demand forecasting, while ensuring manufacturability. Legal, ethical, and environmental responsibilities are non-negotiable โ product liability, uniform commercial codes, and EPA regulations can hold CEOs personally accountable. Designers must ensure consistency with company goals, deliver expected value (reliability, safety, quality), prioritize health and safety, and minimize environmental harm. The key challenge is balancing cost, quality, time-to-market, and customer satisfaction to achieve sustainable competitive advantage.
๐ง Quick Revision Questions
- What are the seven specific activities an organization must follow when designing a new product or service?
- Explain the concept of "product liability" and how it relates to the uniform commercial code.
- What is reverse engineering and how does it help organizations in the design process?
- List and briefly explain the five major factors in a design strategy.
- Why is it important for design, production/operations, and marketing departments to work closely together during the design process?
๐ Lecture 12 โ Product/Service Design (Contd.)
๐ Overview: This lecture continues the discussion on product and service design by exploring critical issues that organizations must address. It covers the strategic decisions around standardization, mass customization, product/service reliability, and the life cycles of products or services, explaining how these factors impact design, manufacturing, and competitive advantage.
๐๏ธ Topics Covered
This lecture examines critical issues in product and service design, beginning with standardization and its advantages and disadvantages. It then introduces mass customization as a strategy combining standardization with customization, followed by an explanation of product/service reliability and related definitions. Finally, the lecture details the stages of product/service life cycles and their implications for operations management.
๐ Lecture Summary
Critical Issues in Product and Service Design
An organization must decide on several critical issues when developing its product and service design. These include the degree of standardization to adopt, the required product/service reliability, the intended range of operating conditions, and the expected product/service life cycles. These decisions fundamentally shape the design process and the resulting product or service.
Standardization
Standardization is the extent to which there is an absence of variety in a product, service, or process. Standardized products are immediately available to customers. For example, when you request a charger for your cellular phone at a shop, the shopkeeper asks for the model and make, then delivers a standardized compatible product made by the phone company or an independent manufacturer.
Advantages of Standardization
- Fewer parts to deal with in inventory and manufacturing. The trend is to use the same components for different product models; similarly, in services, customer data taken once can be utilized for other services.
- Design costs are generally lower because the standardized product has a proven track record, eliminating the need to check safety and reliability features from scratch.
- Reduced training costs and time, which can improve PRODUCTIVITY.
- More routine purchasing, handling, and inspection procedures, leading to decreased cost and improved reliability.
- Orders can be filled from inventory with no need for extra safety stock, as compatible components can be reused in other products.
- Opportunities for long production runs and automation, enabled by an uninterrupted stock of components.
- The need for fewer parts justifies increased expenditures on perfecting designs and improving quality control procedures.
Disadvantages of Standardization
- Designs may be frozen (standardized) with too many imperfections remaining, potentially leading to product or component failure.
- High cost of design changes increases resistance to improvements, due to a lack of confidence in design.
- Reduction in variety leads to decreased consumer appeal, sometimes allowing competitors to produce better or more varied products.
๐ Definition โ Standardization: The extent to which there is an absence of variety in a product, service, or process.
๐ Definition โ Mass Customization: A strategy of producing standardized goods or services, but incorporating some degree of customization through delayed differentiation and modular design.
๐ Definition โ Delayed Differentiation: A postponement tactic where a product or service is produced but not quite completed until customer preferences or specifications are known. A PC manufacturer employed this technology and improved its time of delivery.
Product/Service Reliability
Reliability is the ability of a product, part, or system to perform its intended function under a prescribed set of conditions.
๐ Definition โ Reliability: The ability of a product, part, or system to perform its intended function under a prescribed set of conditions.
๐ Definition โ Failure: A situation in which a product, part, or system does not perform as intended.
๐ Definition โ Normal operating conditions: The set of conditions under which an itemโs reliability is specified. For example, an automobile designed for operation in Europe may not fulfill its intended service in Pakistan, so it would fail and be less reliable.
๐ก Why this matters: Understanding product reliability ensures that designs are appropriate for their intended environment, preventing costly failures and customer dissatisfaction.
Life Cycles of Products or Services
Product lives are governed by the technological rate of change, meaning the need and utility of a product can be severely reduced over time. For example, the VCR no longer enjoys the source of entertainment it had in the 1970s to 1990s. Most products exhibit product life cycles, except for items like wooden pencils, paper clips, nails, and knives.
Life Cycles of Products or Services normally entail the following phases:
- INTRODUCTION PHASE: When items are first introduced, they are received with curiosity. Demand is low in the beginning, then increases as buyers become familiar with the product and see it as reliable and a good buy.
- GROWTH PHASE: With the passage of time, production and design improvements lead to a decrease in cost, making price an attractive feature along with increased reliability.
- MATURITY PHASE: When the product reaches maturity, its demand can only increase if the design is refined or changed and some differentiation feature is added. This may temporarily increase demand, but it eventually declines.
- SATURATION PHASE: In this phase, product demand declines, and the market is saturated with either a compatible product or substitutes.
- DECLINE: In this phase, most organizations adopt a defensive design R&D strategy in an attempt to prolong the life of the product by employing new packaging, redesigning it, or improving its reliability.
๐ Example: Students of Operations Management may be asked to suggest the Product Life Cycle for the Telecom Industry, placing cell phones, wireless phones, landline phones, or satellite/cable-based telephones within the life cycle stages, considering both Pakistan and other developed countries.
โญ Key Takeaways
The most critical issues in product and service design include decisions on standardization, reliability, operating conditions, and life cycles. Standardization offers advantages like lower costs and fewer parts but can reduce variety and consumer appeal. Mass customization combines standardization with customization through delayed differentiation. Product reliability is defined as performing under prescribed conditions, with failure occurring when it does not. All products and services have life cycles with distinct phasesโintroduction, growth, maturity, saturation, and declineโthat operations managers must understand to make strategic design decisions.
๐ง Quick Revision Questions
- What are the five advantages of standardization in product and service design?
- How does mass customization differ from pure standardization, and what is the role of delayed differentiation?
- Define reliability, failure, and normal operating conditions as they relate to product design.
- List the five phases of a typical product or service life cycle.
- Provide an example of a product that exhibits a life cycle and one that does not, as mentioned in the lecture.
๐ Lecture 13 โ Product & Service Design Strategies
๐ Overview: This lecture explores the strategic approaches to designing both products and services in an operations management context. It explains the critical differences between goods and services, introduces various design strategies like DFM and DFA, and covers concepts such as robust design, the Taguchi approach, concurrent engineering, and service blueprinting. Understanding these strategies is essential for an operations manager to align design with manufacturing capabilities, customer satisfaction, and cost-effective quality.
๐๏ธ Topics Covered
The lecture covers a wide range of design strategies including Design for Manufacturing, Assembly, Disassembly, Recycling, and Remanufacturing. It then explains the concept of Robust Design and the Taguchi Approach to reducing variability. The phases of the product development process, concurrent engineering, computer-aided design, and modular design are detailed. Finally, it differentiates between product and service design, explains service blueprinting, characteristics of well-designed service systems, and introduces the House of Quality tool.
๐ Lecture Summary
Design Strategies
Design strategies aim to achieve customer satisfaction and reasonable profit within an organizationโs manufacturing abilities. A common characteristic is avoiding designs that exceed the firm's infrastructure, for example, a car company designing a truck it cannot manufacture.
Some common design strategies are:
- Design for Manufacturing (DFM): The designersโ consideration of the organizationโs manufacturing capabilities when designing a product. A more general term, design for operations, encompasses services as well as manufacturing. Manufacturability is the ease of fabrication and/or assembly, which is important for cost, productivity, and quality.
- Design for Assembly (DFA): Design focuses on reducing the number of parts in a product and on assembly methods and sequence.
- Design for Disassembly (DFD): Design focuses on facilitating the disassembly in a logical and exact reverse sequential manner to the assembly methods and sequence.
- Design for Recycling (DFR): Design allows and facilitates the recovery of materials and components from used products for reuse.
- Design for Remanufacturing: Using some components of old products in the manufacture of new products. Remanufactured products are sold at 30 to 50% of the price of a new product, e.g., Printers, copiers, cameras, PCs, and Cell/Telephones. This can be done by the original equipment manufacturer, a competitor, or an end user (in the latter case, it is called cannibalization).
Recycling is recovering materials for future use. Common reasons include cost savings, environmental concerns, and environmental regulations. Design for recycling is a design strategy that facilitates the recovery of materials and components of old products in the manufacture/assembly of new products, focusing on disassembly and reuse or cannibalization.
Robust Design
Robust Design results in products or services that can function over a broad range of conditions. The idea is to have consistent, safe, and reliable operations with no excuse for environmental characteristics. For example, automobiles produced for European conditions may not perform well in Pakistan because of different environmental conditions. Similarly, a non-OSHA compliant safety boot can probably cause more harm resulting in foot amputation.
Taguchi Approach To Robust Design
Genichi Taguchi, a Japanese Manufacturing Engineer, pioneered the concept of reducing the variability factor in manufacturing processes. This approach helped manufacturing organizations isolate and eliminate waste, resulting in quality improvement and cost reduction. With the aid of the Taguchi Approach, we can determine the factors that are controllable and those not controllable, along with their optimal levels relative to major product advances.
The defining characteristics for the Taguchi approach include:
- Design a robust product
- Insensitive to environmental factors either in manufacturing or in use
- Central feature is Parameter Design
An added concept is the Degree of Newness, which is an incremental enhancement of certain quality-based performance features for a product. Ways to achieve this include:
- Modification of an existing product/service
- Expansion of an existing product/service
- Clone of a competitorโs product/service
- New product/service
- Degree of Design Change
Phases in Product Development Process
A manufacturing organization goes through the following phases when designing a product:
- Idea generation
- Feasibility analysis
- Product specifications
- Process specifications
- Prototype development
- Design review
- Market test
- Product introduction
- Follow-up evaluation
Idea generation often captures reverse engineering, which is the dismantling and inspecting of a competitorโs product to discover product improvements. Research & Development (R&D) is the organized efforts to increase scientific knowledge or product innovation and may involve:
- Basic Research: Advances knowledge about a subject without near-term expectations of commercial applications.
- Applied Research: Achieves commercial applications.
- Development: Converts results of applied research into commercial applications.
Concurrent Engineering
Concurrent engineering is the bringing together of engineering design and manufacturing personnel early in the design phase.
Concurrent Engineering Advantages:
- Manufacturing personnel can identify production capabilities and capacities, informing the design group about the suitability of materials and aiding in cost reduction and quality improvement.
- Early opportunities for design or procurement of critical tooling, which can result in a major shortening of the product development process.
- Early consideration of the technical feasibility of a design, avoiding serious problems during production.
Concurrent Engineering Disadvantages:
- Long-standing boundaries between design and manufacturing can be difficult to overcome.
- Extra communication and flexibility are required, which can be difficult to achieve.
Computer-Aided Design
Computer-Aided Design (CAD) is product design using computer graphics. It:
- Increases productivity of designers by 3 to 10 times.
- Creates a database for manufacturing information on product specifications.
- Provides the possibility of engineering and cost analysis on proposed designs.
Modular Design
Modular design is a form of standardization in which component parts are subdivided into modules that are easily replaced or interchanged. It allows:
- Easier diagnosis and remedy of failures.
- Easier repair and replacement.
- Simplification of manufacturing and assembly.
- A concept idolized in the IT industry for software development.
Service Design
Service is an act, and the service delivery system focuses on facilities, processes, and skills. Many services are bundled with products. A good service design involves:
- The physical resources needed (somewhat Explicit Services).
- The goods purchased or consumed by the customer (Implicit Services).
An operations manager should know the product bundle (the combination of goods and services provided to a customer) and the service package (the physical resources needed to perform the service).
Good Service Spectrum
The spectrum helps understand how a purely manufacturing organization handles a service assignment. For example, Steel Production and Automobile Manufacturing have high goods control, while Teaching has high service content. Increasing goods control means decreasing service content, and vice-versa.
Difference between Product and Service Design
- Products are tangible; services are intangible.
- Services are created and delivered simultaneously (e.g., haircut, car wash).
- Services are highly visible to customers and must be designed with that in mind.
- Services cannot be inventoried, placing restrictions on flexibility and increasing the importance of capacity design.
- Location is important to service design.
- Services have low barriers to entry, placing pressure on being innovative and cost-effective.
Phases in Service Design
- Conceptualize
- Identify service package components
- Determine performance specifications
- Translate performance specifications into design specifications
- Translate design specifications into delivery specifications
Service Blueprinting
Service blueprinting is a method used in service design to describe and analyze a proposed service. It is a useful tool for conceptualizing a service delivery system.
Major Steps in Service Blueprinting:
- Establish boundaries and decide on the level of detail needed.
- Identify steps involved and describe them.
- Prepare a flowchart of major process steps.
- Identify potential failure points and incorporate features to minimize them.
- Establish a time frame for service execution and an estimate of variability in processing time requirements.
- Analyze profitability, as waiting time leads to negative profitability.
Characteristics of Well Designed Service Systems
A well-designed service system should be consistent with the organizationโs vision and mission. It should be user-friendly, robust, easy to sustain, cost-effective, and bring value to customers. It should create an effective linkage between back operations and front operations, have a single unifying theme, and ensure reliability and high quality.
Reasons for a poor service design include variable requirements, difficult-to-describe requirements, and a high volume of customer contact. These challenges can be overcome by defining standardized requirements, making simpler requirements, and handling limited numbers of customers at each service station.
The House of Quality
Quality Function Deployment (QFD) is the voice of the customer and is often in the form of a House of Quality. This tool translates customer requirements into design requirements, using a correlation matrix and a relationship matrix to link them, and includes a competitive assessment section.
๐ก Why this matters: The House of Quality ensures that the final product or service design directly addresses what the customer wants, making it a powerful tool for aligning design with market needs.
โญ Key Takeaways
A student must remember that design strategies like DFM, DFA, DFD, DFR, and Design for Remanufacturing are all aimed at optimizing the manufacturing process, cost, and quality. The Taguchi Approach is critical for reducing variability to create robust products. The key difference between product and service design lies in intangibility, simultaneity, and the inability to inventory services. Service blueprinting is a vital tool for visualizing and improving service delivery. Finally, Quality Function Deployment and the House of Quality bridge customer needs with technical design specifications.
๐ง Quick Revision Questions
- What is the primary goal of "Design for Remanufacturing," and what is a typical price range for a remanufactured product?
- Explain the core concept of Genichi Taguchiโs approach to robust design and its primary benefit.
- List three key differences between product design and service design as discussed in the lecture.
- What is the purpose of "Service Blueprinting," and why is establishing a time frame for service execution a critical step in the process?
- How does "Concurrent Engineering" improve the product development process, and what is one of its potential disadvantages?
๐ Lecture 14 โ RELIABILITY
๐ Overview: This lecture defines reliability in operations and product/service contexts, distinguishes it from safety, and explains how to measure reliability using probability and time-based models. Understanding reliability is critical for ensuring product quality, customer satisfaction, and competitive advantage.
๐๏ธ Topics Covered
The lecture covers the definition of reliability, failure, and normal operating conditions; measuring reliability using probability concepts (Rules 1, 2, and 3 for independent events and redundancy); time-based reliability using failure rate and the bathtub curve (infant mortality, random failures, wear-out); exponential and normal distributions for calculating reliability; availability; and ways to improve reliability through design, testing, redundancy, preventive maintenance, user education, and R&D.
๐ Lecture Summary
Reliability
We often confuse reliability with safety, but safety is only one small aspect of reliability. Reliability must be understood in terms of failure and normal operating conditions.
๐ Definition โ Reliability: The ability of a product, part, or system to perform its intended function under a prescribed set of conditions.
๐ Definition โ Failure: Situation in which a product, part, or system does not perform as intended.
๐ Definition โ Normal operating conditions: The set of conditions under which an itemโs reliability is specified. For example, an automobile designed for operation in Europe may not fulfill its intended useful service in Pakistan โ it has the potential to fail and be less reliable. "Potential" refers to something hidden or attached to performance or operations. A bank failing to provide reliable normal operating service can lead to disastrous financial consequences; a pharmacy dispensing expired medicines can cause serious health hazards. The characteristic that avoids something aberrant happening is reliability.
Measuring Reliability
Reliability can be measured effectively using the concept of chance or probability โ we can quantify reliability in terms of statistical probability. Products are often made more reliable by increasing the presence of critical elements. For example, a server computer may have two or more uninterrupted power supply units ensuring safe operations. Building code requirements in the past followed a more stringent factor of safety, often leading to redundancy โ subassemblies, components, or elements never used in normal routine operations. The Taguchi method reminds us that a product should provide what it promises under a well-defined range of operating conditions. A car manufactured in Lahore should provide the same service in northern areas or coastal belt with the same reliability and robustness.
๐ Definition โ Redundancy: The use of backup components to increase reliability.
๐ Example: If a component has a reliability of 0.9, it means it has a 90% probability of functioning as intended. The probability it will fail is 1 - 0.9 = 0.1 (10%).
We can use probability in two functions:
- The probability that the product or system will function when activated.
- The probability that the product or system will function for a given length of time.
Reliability and Probability Basics
Probability explains reliability by considering that a product or system will either function when activated or function for a given length of time. This requires knowledge of independent events and redundancy.
๐ Definition โ Independent events: Events whose occurrence or nonoccurrence do not influence each other.
RULE 1 If two or more events are independent and success is defined as the probability that all of the events occur, then the probability of success is equal to the product of probabilities.
๐ Example: Two lamps must both light up to ensure visibility. Lamp 1 reliability = 0.90, Lamp 2 reliability = 0.80. Reliability of the System = (Reliability of component 1) ร (Reliability of Component 2) = 0.90 ร 0.80 = 0.72
RULE 2 If two events are independent and "success" is defined as the probability that at least one of the events will occur, then the probability is: Probability of first event + (1.00 - Probability of first event) ร Probability of second event.
๐ Example: Lamp 2 is a backup (redundancy) for Lamp 1. Lamp 1 = 0.90, Lamp 2 (backup) = 0.80. Reliability = 0.90 + (1 - 0.90) ร 0.80 = 0.90 + 0.10 ร 0.80 = 0.90 + 0.08 = 0.98 ๐ก Why this matters: Redundancy increases system reliability from 0.90 to 0.98.
RULE 3 If three events are involved and success is defined as the probability that at least one of them occurs, the probability of success is: P(first) + (1-P(first))รP(second) + (1-P(first))ร(1-P(second))รP(third). This can also be calculated as 1 - P(all fail).
๐ Example: Three lamps. Lamp 1 = 0.90, Lamp 2 = 0.80, Lamp 3 = 0.70. Reliability = 1 - P(all fail) = 1 - [(1-0.90)ร(1-0.80)ร(1-0.70)] = 1 - [0.10ร0.20ร0.30] = 1 - 0.006 = 0.994
Example S-1 Reliability Determine the reliability of the system shown: Components: 0.98 โ 0.90 (with 0.90 backup) โ 0.95 (with 0.92 backup)
Example S-1 Solution The system can be reduced to a series of three components:
- First component: 0.98
- Second component (with backup): 0.90 + 0.90ร(1-0.90) = 0.90 + 0.90ร0.10 = 0.90 + 0.09 = 0.99
- Third component (with backup): 0.95 + 0.92ร(1-0.95) = 0.95 + 0.92ร0.05 = 0.95 + 0.046 = 0.996 System reliability = 0.98 ร 0.99 ร 0.996 = 0.966
2. Time based Reliability โFailure Rateโ
The second measurement of reliability is carried out in terms of time. Components, products, or services have limited lives. A product or serviceโs working life when exhausted or ending prematurely is referred to as failure rate.
๐ Example: If 1000 bulbs are manufactured, they undergo stringent testing. Some bulbs fail in testing and are not shipped. The testing results can be plotted to show the bathtub curve.
The bathtub curve has three phases:
- Phase I (Infant Mortality): Near the origin. Quite a few products fail shortly after being put into service โ not because they wear out, but because they are defective to begin with.
- Phase II (Random Failures): The failure rate decreases rapidly once truly defective items are weeded out (eliminating inferior products/services). This is the longest period, with fewer failures.
- Phase III (Wear-out): Failure occurs because products have completed their normal service life and worn out. The graph steepens upward, indicating an increase in failure rate.
Exponential Distribution FOR INFANT MORTALITY STAGE
Equipment and product failures may occur in an exponential distribution pattern.
๐ Formula: Reliability = e^(-T/MTBF) where MTBF = Mean Time Between Failures. The probability of failure before time T = 1 - e^(-T/MTBF).
๐ Definition โ Mean Time Between Failures (MTBF): The distribution mean used by reliability engineers to describe the exponential distribution.
๐ Example: An exponential distribution is completely described using MTBF. Using T to represent the length of service, we calculate P(No failure before T) = e^(-T/MTBF).
NORMAL DISTRIBUTION
Product failure due to wear-out can be determined using the normal distribution.
๐ Formula: z = (T - Mean wear-out time) / (Standard Deviation of wear-out time)
To obtain the probability that service life will not exceed some value T, compute z and refer to the statistical table. To find reliability for some T, subtract this probability from 100 percent. To obtain the value of T that will provide a given probability, locate the nearest probability under the curve to the left in the statistical table, then use the corresponding z in the formula to determine T.
Example The mean life of a certain steam turbine can be modeled using a normal distribution with a mean life of six years and a standard deviation of one year.
-
(a) Probability that a steam turbine will wear out before seven years of service: z = (7 - 6) / 1 = +1.00 From statistical table: P(T < 7) = 0.8413
-
(b) Probability that a steam turbine will wear out after seven years of service (reliability): Reliability = 1.00 - 0.8413 = 0.1587
-
(c) Service life that will provide a wear-out probability of 10 percent: From normal table: z = -1.28 (corresponding to 10% area under the curve to the left) -1.28 = (T - 6) / 1 T = 6 - 1.28 = 4.72 years
AVAILABILITY
๐ Definition โ Availability: The fraction of time a piece of equipment is expected to be available for operation.
๐ Formula: Availability = MTBF / (MTBF + MTR) where MTR = Mean Time to Repair.
Improving Reliability
Reliability can be improved through:
- Component design: Parts of a car
- Production/assembly techniques: No reworks, fool-proof assembly
- Testing: For trouble-free final product
- Redundancy/backups: Common remedy, though not always possible
- Preventive maintenance procedures
- User education: Operating manuals
- System design: Senior management issue; reliability is always considered important
- Research & Development (R&D): Organized efforts to increase scientific knowledge or product innovation, including:
- Basic Research: Advances knowledge without near-term commercial expectations
- Applied Research: Achieves commercial applications
- Development: Converts results of applied research into commercial applications
CONCLUSION
It is important to understand reliability in terms of normal operating conditions and safe operations. Products and services are designed to provide this opportunity to the fullest. It is recommended to invest more in R&D to increase reliability. Quality checks should be incorporated at suitable places. Emphasis should shift from short-term performance to both short and long-term performance improvement. Operations managers should work toward continual and gradual improvements instead of a big-bang approach. They should work to shorten the product life cycle (not the product's life) as it increases product safety and reliability. Operations should be encouraged to adopt component commonality, continual improvement, and shorten time to market.
โญ Key Takeaways
Reliability is the ability of a product or system to perform its intended function under prescribed conditions, and it must be distinguished from safety. Measuring reliability uses probability: for all components working (Rule 1: multiply probabilities), for at least one working with redundancy (Rule 2 and 3: 1 minus product of failure probabilities). Time-based reliability uses the bathtub curve (infant mortality, random failures, wear-out), with exponential distribution for early failures and normal distribution for wear-out failures, using MTBF and z-scores. Availability is calculated as MTBF divided by the sum of MTBF and Mean Time to Repair. Improving reliability requires component design, testing, redundancy, preventive maintenance, user education, system design, and R&D investment in basic and applied research.
๐ง Quick Revision Questions
- What is the definition of reliability, and how does it differ from safety?
- Calculate the reliability of a system with two components in series (R1 = 0.85, R2 = 0.92) and the reliability of the same system if the second component has a backup with reliability 0.80.
- What are the three phases of the bathtub curve, and what causes failures in each phase?
- A component has a mean wear-out life of 5 years and a standard deviation of 0.5 years. What is the probability it will fail before 4 years of service? (Assume normal distribution)
- If a machine has an MTBF of 200 hours and an MTR of 5 hours, what is its availability?