π Lecture 15 β Capacity Planning
π Overview: This lecture introduces the concept of capacity planning, which determines the upper limit of output an operating unit can handle. It explores why capacity decisions are critical across all organizational departments, affecting everything from cost and competitiveness to long-term strategic planning. The lecture provides foundational knowledge for defining, measuring, and developing capacity alternatives.
ποΈ Topics Covered
The lecture covers the definition and importance of capacity planning, the key questions operations managers must answer regarding capacity, and the distinction between planning the system versus planning its use. It then examines seven critical impacts of capacity decisions, including effects on future demand satisfaction, operating costs, initial costs, long-term commitment, competitiveness, ease of management, and globalization complexity. Finally, it discusses how to measure capacity using input units rather than monetary or single-product measures.
π Lecture Summary
Capacity Planning
Capacity is defined as the upper limit or ceiling on the load (demand for a product or service) that an operating unit can handle. An operations manager must identify tactics and formulate a strategy to answer three basic questions: 1) What kind of capacity is needed? 2) How much is needed? 3) When is it needed? The lecture illustrates this through the tragic example of the October 8, 2005 earthquake in Pakistan, which exposed severe capacity limitations in food, shelter, medicines, and rescue operations, forcing organizations to plan how to overcome these shortcomings.
The lecture connects capacity planning to earlier discussions on forecasting. Irregular variations are unusual circumstances (severe weather, earthquakes, worker strikes, major changes) that do not reflect true variable behavior and should be removed from data. Forecasts have two uses for operations managers: first, to plan the system (long-term plans about products, facilities, equipment, and location), and second, to plan the use of the system (short-range and intermediate-range planning for inventory, workforce, purchasing, production, budgeting, and scheduling).
Importance of Capacity Decisions
Capacity decisions have seven major impacts on an organization:
-
Impacts ability to meet future demands. Capacity essentially limits the rate of possible output. Having sufficient capacity to satisfy demand allows a company to take advantage of tremendous opportunities. The example given is an international automobile manufacturer that increased production capacity after its quality product received far more demand than anticipated.
-
Affects operating costs. Since forecasted demand differs from actual demand, organizations must balance the costs of overcapacity (wasted resources) versus undercapacity (lost market opportunities). Overcapacity is an overkill of resources, while undercapacity reflects weak management in exploiting available markets.
-
Acts as a major determinant of initial costs. Generally, greater capacity means greater cost, though larger units tend to cost proportionately less than smaller units. The Pakistan Steel Mill at Karachi is cited as an example where higher costs are misunderstood because the mill's capacity is not being fully utilized.
-
Involves long-term commitment. Once resources are committed, reversing the decision is costly. Any capacity increase or decrease involves additional costs.
-
Affects competitiveness. If a firm has excessive capacity or can quickly add capacity, this may serve as a barrier against entry by other firms.
-
Affects ease of management. Capacity decisions require management to consider both operating the organization and changing plant capacity.
-
Globalization adds complexity. Capacity decisions in foreign countries require management to understand political, economic, and cultural issues, impacting long-range planning (decisions extending beyond 18 months).
Organizations often use rupee amounts to show capacity ceiling, but this requires constant updating due to price changes in raw materials and utilities. A simpler approach is measuring capacity in terms of units produced, but this only works for single products and fails with multiple types or designs. The preferred method is identifying capacity in terms of availability of input unitsβfor example, hospitals are measured by number of beds (e.g., 200 beds), workshops by man-hours, and so forth.
β Key Takeaways
Capacity is the maximum output an operating unit can handle, and operations managers must answer what kind, how much, and when capacity is needed. The distinction between planning the system (long-term) and planning the use of the system (short/intermediate-term) is fundamental to capacity decisions. Capacity decisions impact seven critical areas: meeting future demand, operating costs, initial costs, long-term commitment, competitiveness, ease of management, and globalization complexity. Measuring capacity in terms of input units (beds, man-hours) is preferred over monetary or single-product measures because it remains stable and applies across diverse operations. The earthquake example vividly demonstrates how real-world events expose capacity limitations and force organizations to plan for overcoming shortfalls.
π§ Quick Revision Questions
- What are the three basic questions an operations manager must answer regarding capacity?
- How do "irregular variations" from forecasting relate to capacity planning, and what is the earthquake example illustrating?
- List four of the seven ways capacity decisions impact an organization, and explain one in detail.
- Why is measuring capacity in monetary terms (rupees) problematic, and what is the preferred alternative?
- What is the difference between "planning the system" and "planning the use of the system" in the context of capacity?
π Lecture 16 β Capacity Planning (Contd.)
π Overview: This lecture continues the discussion on capacity planning, focusing on how operations managers evaluate and improve organizational capacity. It covers the critical distinction between design capacity and effective capacity, explores the seven determinants of effective capacity, and outlines strategies for developing and evaluating capacity alternatives, including the economic principles of economies and diseconomies of scale.
ποΈ Topics Covered
The lecture begins by clarifying the distinction between organizational-level and operational-level capacity decisions and introduces the concepts of efficiency and utilization with a worked example. It then systematically examines the seven determinants of effective capacityβfacilities, product/service factors, process factors, human factors, operational factors, supply chain factors, and external factors. The discussion moves to strategy formulation for capacity planning, key decisions, and the steps for formulating a capacity planning strategy. The lecture concludes with an in-depth look at developing capacity alternatives, the cost curve analysis, economies and diseconomies of scale, and how to evaluate alternatives across different plant sizes.
π Lecture Summary
Efficiency and Utilization
Operations managers must understand the distinction between Design Capacity and Effective Capacity before they can compute utilization. Design capacity is the maximum output rate or service capacity an operation, process, or facility is designed for. Effective capacity refers to Design capacity minus allowances such as personal time, maintenance, and scrap. Actual output is the rate of output actually achievedβit cannot exceed effective capacity.
π Definition β Efficiency: Actual output as a percentage of effective capacity. π Formula: Efficiency = (Actual Output / Effective Capacity) Γ 100 β Measures how well the operation performs relative to its realistic maximum.
π Definition β Utilization: Actual output as a percentage of design capacity. π Formula: Utilization = (Actual Output / Design Capacity) Γ 100 β Measures how much of the theoretical maximum capacity is being used.
π Example: The following data is given:
- Design capacity = 50 trucks/day
- Effective capacity = 40 trucks/day
- Actual output = 36 units/day
Step 1: Calculate Efficiency Efficiency = Actual Output / Effective Capacity = 36 units/day / 40 units/day = 0.90 = 90%
Step 2: Calculate Utilization Utilization = Actual Output / Design Capacity = 36 units/day / 50 units/day = 0.72 = 72%
This example shows that while the operation is running at 90% of its realistic capacity, it is only using 72% of the facility's theoretical maximum output.
Determinants of Effective Capacity
Operations managers focus on determinants of effective capacity at both macro and micro levels. There are 7 determinants of effective capacity:
-
Facilities β The design of facilities includes size and provision for expansion. Important factors include transportation costs, distance to market, labor supply, energy supply sources, and the ease and smoothness with which work can be performed. Environmental factors such as heating, lighting, and ventilation increase workforce performance and act as sources of motivation and worker loyalty.
-
Product and service factors β These have a tremendous influence on capacity. When items are similar, the ability of the system to produce those items is generally much greater than when successive items are different and unique. More uniformity in the final product/service output results in greater capacity. A PC manufacturer in the USA standardized its products and split assembly lines only where a small differential product feature was required.
-
Process factors β These refer to the quantity and quality requirements of a process. Quantity always refers to capacity. If quality of output does not match standard requirements, it generates inspection and possible reworks.
-
Human factors β These include skill, craftsmanship, training, and qualification to handle any job, as well as motivational factors.
-
Operational factors β These refer to scheduling, late deliveries, acceptability of purchased materials and parts, quality inspection, control procedures, and inventory problems. Scheduling issues arise when an organization has differences in equipment capabilities for developing alternative capacities. Inventory problems have a negative impact on capacity.
-
Supply chain factors β These relate to any shortcomings from suppliers, warehouse processing, operational hiccups, or distribution issues.
-
External factors β These include product standards, safety regulations, unions, and pollution control standards. Organizations have experienced shutdowns of their facilities when they could not comply with government regulations on pollution control.
Strategy Formulation with respect to Capacity Planning
Capacity strategy formulation considers five elements:
- Capacity strategy for long-term demand β Focuses on demand patterns and takes into account growth rate and variability
- Facilities β Focuses on cost of building and operating
- Technological changes β Relates to rate and direction of technology changes
- Behavior of competitors
- Availability of capital and other inputs
Key Decisions of Capacity Planning
To carry out correct capacity planning, operations managers must identify five key decisions:
- Amount of capacity needed
- Timing of changes
- Need to maintain balance
- Extent of flexibility of facilities
Steps for Capacity Planning Strategy
To formulate a capacity planning strategy, eight steps must be followed:
- Estimate future capacity requirements
- Evaluate existing capacity
- Identify alternatives
- Conduct financial analysis
- Assess key qualitative issues
- Select one alternative
- Implement the chosen alternative
- Monitor results
Developing Capacity Alternatives
Organizations develop capacity alternatives using four approaches:
-
Design flexibility into systems β If flexibility alternatives are provided at the time of original design, it saves cost in remodeling and modifications when expansion is carried out later.
-
Take stage of life cycle into account β Operations managers must observe whether the capacity increase alternative is for a new product/service or a mature product/service. Predictability for a new service is riskier compared to an established mature product or service.
-
Take a "big picture" approach to capacity changes β It is necessary to understand the interrelationship of system components. This relates to setting up parking space, housekeeping, and landscaping if an expansion is to be accommodated in a multi-purpose shopping plus apartment complex.
-
Prepare to deal with capacity "chunks" β Capacity increases are normally obtained in big chunks instead of incremental increases. A steel mill's furnace may not provide the exact required increase in capacity. For example, if demand for steel in Sukkhur is 2000 tonnes per annum but the local steel mill has a capacity of 1800 tonnes per annum, the mill can increase production from 1800 to 2200 tonnes per annumβnot exactly to 2000 tonnes per annum.
π‘ Why this matters: Organizations attempt to smooth out capacity requirements, but simply adding capacity by increasing workforce, machines, or facility size does not help. Operations managers must identify the optimal operating levelβthe point where cost per unit is the lowest for that production unit.
Economies of Scale and Diseconomies of Scale
Economies of scale reflects the concept that the average unit cost of a good or service can be reduced by increasing its output rate. Diseconomies of scale reflects the case when the average cost per unit increases as the facility's size increases.
If the output rate is less than the optimal level, increasing output rate results in decreasing average unit costsβthis reflects Economies of Scale. If the output rate is more than the optimal level, increasing the output rate results in increasing average unit costsβthis reflects Diseconomies of Scale.
The cost curve shows that at low levels of output, the costs of facilities and equipment must be absorbed by few units, so the cost per unit is very high. As output increases, there are more units to absorb the fixed cost of utilities, facilities, and equipment, so unit cost decreases. Minimum Cost is recorded at the optimal rate; beyond that, unit cost starts to increase because factors such as worker fatigue, equipment breakdown, loss of flexibility, less margin for error, and increased difficulty in coordinating activities become more important.
Evaluating Alternatives
Minimum cost and optimal operating rate are functions of the size of the production unit. The evaluation of alternatives shows that as the general capacity of the plant increases:
- The optimal output rate increases
- The minimum cost for the optimal rate decreases
- This is the prime reason why larger plants tend to have higher optimal output rates and lower minimum costs than smaller plants
Senior management takes into account the same considerations in addition to availability of financial and capital resources and forecasted demand. The important step is to determine enough points for each size facility to be able to make a comparison among different sizes. In some industries or types of services, facility sizes are given, while in others, facility size is a continuous variable.
Occasionally, management decides on a size that does not have the desired rate of outputβfor example, in pharmaceutical companies, oil fields, and gas fields. An organization needs to examine alternatives for future capacity from different perspectives. Economic conditions set external conditions that influence whether an alternative will be feasible, how much it will cost, how soon it can be obtained, and what operating and maintenance costs will be.
Possible negative opinions may arise from decisions to build a new power plant (nuclear, coal, geothermal), displacement of people if a new hydro plant is to be built, and environmental issues related to a company's new project.
β Key Takeaways
The most critical concepts from this lecture are: first, the distinction between design capacity (theoretical maximum) and effective capacity (realistic maximum after allowances) is essential for calculating efficiency and utilizationβtwo metrics that reveal how well an operation is performing. Second, the seven determinants of effective capacity (facilities, product/service factors, process factors, human factors, operational factors, supply chain factors, and external factors) provide a comprehensive framework for diagnosing capacity constraints at both macro and micro levels. Third, the cost curve analysis demonstrates that every production unit has an optimal operating level where unit cost is minimized; operating below this level yields economies of scale, while operating above it yields diseconomies of scale due to factors like worker fatigue and equipment breakdown. Fourth, capacity planning requires a structured approach with eight steps, and capacity increases often come in "chunks" rather than incremental amounts, making it difficult to match exact demand. Finally, evaluating alternatives across different plant sizes reveals that larger plants typically have higher optimal output rates and lower minimum costs, but managers must also consider economic conditions, qualitative issues, and potential negative public opinion.
π§ Quick Revision Questions
-
If a facility has a design capacity of 100 units per day, an effective capacity of 80 units per day, and an actual output of 60 units per day, what are the efficiency and utilization percentages?
-
Explain how product and service factors (determinant #2) influence effective capacity, using the example of the PC manufacturer mentioned in the lecture.
-
What is the difference between economies of scale and diseconomies of scale? At what point on the cost curve does the shift from one to the other occur?
-
List the eight steps for formulating a capacity planning strategy in the correct order.
-
Why do capacity increases often come in "chunks" rather than incremental amounts? Provide the steel mill example to illustrate your answer.
π Lecture 17 β Capacity Planning (Contd.)
π Overview: This lecture continues the discussion on capacity planning, focusing on evaluating capacity alternatives using cost-volume analysis. It explains how to determine optimal operating rates, compares different plant sizes, and introduces financial analysis tools like break-even analysis and present value to aid capacity decisions. The lecture also addresses unique considerations for service capacity planning.
ποΈ Topics Covered
The lecture covers evaluating capacity alternatives through cost curves and minimum average cost per unit, the relationship between plant size and optimal output rates, planning service capacity (including location, inability to store services, and demand volatility), cost-volume relationships with assumptions and formulas, break-even analysis with step fixed costs, and financial analysis techniques including cash flow and present value. A detailed example calculating break-even points and profit for a cricket bat factory is provided.
π Lecture Summary
Evaluating Alternatives
The cost curve shows that at low levels of output, the cost per unit is very high because fixed costs of facilities and equipment must be absorbed by few units. As output increases, more units absorb these fixed costs, so unit cost decreases. The minimum cost occurs at the optimal rate of output. Beyond this point, unit cost increases due to factors like worker fatigue, equipment breakdown, loss of flexibility, less margin for error, and increased difficulty in coordinating activities.
π Definition β Optimal Operating Rate: The output level at which average cost per unit is minimized.
Evaluating Alternatives β Plant Size Comparison
As the general capacity of the plant increases, the optimal output rate increases and the minimum cost for the optimal rate decreases. This is why larger plants tend to have higher optimal output rates and lower minimum costs than smaller plants. Senior management considers availability of financial resources, capital resources, and forecasted demand when making these decisions.
The important step is to determine enough points for each size facility to make a comparison among different sizes. In some industries, facility sizes are given (fixed), while in others, facility size is a continuous variable. Occasionally, management decides on a size that does not have the desired rate of output (e.g., pharmaceutical companies, oil fields, gas fields).
An organization must examine alternatives from different perspectives. Economic conditions influence whether the alternative will be feasible, how much it will cost, how soon it can be implemented, and what operating and maintenance costs will be. Possible negative opinions may arise from decisions to build new power plants (nuclear, coal, geothermal), displacement of people for hydro plants, or environmental issues related to new projects.
π‘ Why this matters: Understanding the trade-off between plant size and optimal output helps managers balance economies of scale against practical constraints like financing and demand.
Planning Service Capacity
Services are different from manufacturing because services cannot be inventoried, making capacity planning essential. Key considerations include:
- Need to be near customers β Capacity and location are closely tied
- Inability to store services β Capacity must be matched with timing of demand
- Degree of volatility of demand β Demand can vary significantly between peak and low periods
Cost-Volume Relationships
Assumptions of Cost-Volume Analysis:
- One product is involved
- Everything produced can be sold
- Variable cost per unit is the same regardless of volume
- Fixed costs do not change with volume
- Revenue per unit is constant with volume
- Revenue per unit exceeds variable cost per unit
Cost-volume analysis focuses on relationships between costs, revenue, and volume of output. Its primary purpose is to estimate the income of an organization under different operating conditions. It is particularly useful for comparing capacity alternatives.
The application requires identification of all costs related to production. Fixed costs (rental costs, property taxes, equipment costs, heating/cooling, administration costs) remain constant regardless of output volume. Variable costs (materials and labor) vary directly with output volume, and for analysis, variable cost per unit is assumed to remain the same.
Model Construction:
Step I β Total Cost:
TC = FC + VC Γ Q
Where TC = Total Cost, FC = Fixed Cost, VC = Variable Cost per unit, Q = Quantity of Output
Step II β Total Revenue:
TR = R Γ Q
Where TR = Total Revenue, R = Revenue per unit, Q = Quantity of Output
Step III β Profit:
P = TR - TC
P = R Γ Q - (FC + VC Γ Q)
P = Q(R - VC) - FC
Rearranging:
P + FC = Q(R - VC)
Q = (P + FC) / (R - VC)
π Definition β Break-Even Point (QBEP): The quantity of output at which profit equals zero (total revenue equals total cost).
π Formula:
QBEP = FC / (R - VC)
β The break-even quantity equals fixed costs divided by the contribution margin per unit (price minus variable cost per unit).
Cost-Volume Relationships β Step Fixed Costs
Capacity alternatives often involve step costs, which increase in stepwise fashion as potential volume increases. For example, an organization may have the option of purchasing one, two, or three machines, with each additional machine increasing fixed cost in a non-linear way. In such scenarios, fixed costs and potential volume depend on the number of machines purchased or installed.
In break-even problems with step fixed costs, multiple break-even quantities may occur β possibly one for each range. The total revenue line might not intersect the fixed cost line in a particular range, meaning there would be no break-even point in that range. To decide how many machines to purchase, a manager must consider projected annual demand (volume) relative to multiple break-even points and select the most appropriate number of machines.
Example β Cricket Bat Factory
Problem: A sports goods factory in Sialkot is adding a new line of cricket bats.
- Monthly equipment lease: Rs. 60,000 (Fixed Cost)
- Variable Costs: Rs. 200 per bat
- Selling price: Rs. 2,000 per bat
1. Break-even quantity:
QBEP = FC / (R - VC)
= 60,000 / (2,000 - 200)
= 60,000 / 1,800
= 33.33 bats = 33 bats
2. Profit or loss for 100 bats:
P = Q(R - VC) - FC
= 100(2,000 - 200) - 60,000
= 100 Γ 1,800 - 60,000
= 180,000 - 60,000
= Rs. 120,000 (profit)
3. Quantity needed for Rs. 40,000 profit:
Q = (FC + P) / (R - VC)
= (60,000 + 40,000) / (2,000 - 200)
= 100,000 / 1,800
= 55.56 = 56 bats
π Example Summary: The factory needs to sell 33 bats per month just to cover costs. Selling 100 bats yields a profit of Rs. 120,000, and to achieve a target profit of Rs. 40,000, they must sell 56 bats.
Financial Analysis
Mathematical techniques used to evaluate capacity alternatives include:
- Cost Volume Relationships
- Financial Analysis
- Decision Theory
- Waiting Line Analysis
Capacity alternatives are often evaluated with the aid of financial analyses. Operations managers work with managerial accountants to calculate cash flow or present value in terms of rupees available for capacity alternative decisions.
π Definition β Cash Flow: The difference between cash received from sales and other sources, and cash outflow for labor, material, overhead, and taxes.
π Definition β Present Value: The sum, in current value, of all future cash flows of an investment proposal.
Waiting Line Analysis and Decision Theory are also important ways to evaluate capacity alternatives.
Conclusion
Capacity planning helps an organization formulate both its long-term (organizational) strategy and short-term (operational) strategy. Long-term capacity decisions relate to overall level of capacity, while short-term capacity decisions refer to seasonal, random, or irregular variations in demand. Ideally, capacity should match demand, but this rarely happens. Capacity alternative decisions should be taken using the systems approach (the "big picture" approach), as removing a bottleneck at the department level may not improve the organization's overall effectiveness. An effective operations manager uses both qualitative and quantitative analysis to evaluate capacity alternatives.
Capacity decisions are often based on facilities layout, and together they define the very existence of an organizational unit.
β Key Takeaways
The most critical concepts from this lecture are: (1) The cost curve shows that unit cost decreases as output increases (due to spreading fixed costs), reaches a minimum at the optimal operating rate, then increases due to factors like worker fatigue and equipment breakdown. (2) Larger plants tend to have higher optimal output rates and lower minimum costs than smaller plants. (3) The break-even formula (QBEP = FC / (R - VC)) is essential for determining how many units must be sold to cover all costs, and this can be extended to calculate profit at any volume or the volume needed for a target profit. (4) Step fixed costs occur when capacity alternatives involve additional machines or facilities, creating potentially multiple break-even points across different volume ranges. (5) Service capacity requires special attention because services cannot be inventoried, and financial analyses like cash flow and present value are critical tools for evaluating capacity alternatives alongside cost-volume analysis.
π§ Quick Revision Questions
-
What is the break-even quantity (QBEP) for the cricket bat factory example, and what does this number represent in practical terms?
-
Why does the average cost per unit initially decrease and then increase as output rate increases? Name at least two factors that cause the increase.
-
How do step fixed costs differ from regular fixed costs, and why might multiple break-even points occur in such scenarios?
-
What are three key differences between planning capacity for services versus manufacturing?
-
Given a product with fixed costs of Rs. 100,000, variable cost per unit of Rs. 50, and selling price of Rs. 150, calculate the break-even quantity and the number of units needed to achieve a profit of Rs. 50,000.
π Lecture 18 β PROCESS SELECTION
π Overview: This lecture explains the critical role of process selection in designing production and operations management systems. It covers how organizations decide on production methods, whether to make or buy components, and the various types of processing from continuous to intermittent. Understanding process selection helps operations managers align technology, capacity, and flexibility with customer demand.
ποΈ Topics Covered
The lecture introduces process selection as part of overall system design, covering make-or-buy decisions, capital intensity, and process flexibility. It then explains six reasons for making or buying, followed by a detailed classification of operation types including continuous, repetitive, intermittent, batch, and job shop processing. Automation technologies such as CAM, CNC, robots, manufacturing cells, and flexible manufacturing systems are discussed, along with computer integrated manufacturing and operations strategy considerations.
π Lecture Summary
Introduction and Meaning
Process Selection refers to the way an organization chooses to produce its goods or services. It takes into account selection of technology, capacity planning, layout of facilities, and design of work systems. Process selection is a natural extension after selection of new products and services.
An organization's process strategy includes three components:
- Make or Buy Decisions β The extent to which an organization will produce goods or provide services in-house as opposed to relying on an outside organization.
- Capital Intensity β The mix of equipment and labor will be used by the organization.
- Process Flexibility β The degree to which the system can be adjusted to changes in processing requirements due to factors such as changes in product or service design, changes in volume processed, and changes in technology.
Reasons to (Produce in-House or Outsource) Make or Buy
There are six reasons to decide whether to develop a competence in-house or hire an outside organization. The latter requires the outsourcer to be honest, ethical, and competent, and that the outsourcing contract be flexible yet pragmatic with proper service levels.
-
Available Capacity β If an organization has the equipment, necessary skills, and time, it often makes sense to produce an item or perform a service in-house. The additional costs would be relatively small compared with buying or subcontracting.
-
Expertise β If a firm lacks the expertise to do a job satisfactorily, buying might be a reasonable alternative.
-
Quality Considerations β Firms that specialize can usually offer higher quality than an organization can attain itself. Conversely, special quality requirements or the ability to closely monitor quality may cause an organization to perform a job itself.
-
Nature of Demand β When demand for an item is high and steady, the organization is often better off doing the work itself. However, wide fluctuations in demand or small orders are usually better handled by specialists who can combine orders from multiple sources.
-
Cost β Any cost savings achieved from buying or making must be weighed against the preceding factors. Cost savings might come from the item itself or from transportation cost savings. Fixed costs that cannot be reallocated if the item is purchased must be recognized in cost analysis.
-
Risk β Outsourcing or buying services carries risk. Often companies retain flexibility by carrying out certain critical activities in-house and repetitive menial activities through outsourcing.
π‘ Why this matters: The make-or-buy decision directly impacts an organization's cost structure, quality control, and strategic flexibility. Getting this decision wrong can lead to either excessive fixed costs or loss of core competencies.
Types of Operation
The degree of standardization and the volume of output of a product or service influence how production is organized. Output can range from high volume, highly standardized, to low volume, highly customized.
- Continuous Processing
- Repetitive Processing
- Intermittent Processing
- Batch Processing
- Job Shop
- Automation
- Computer Aided Manufacturing
- Numerically Controlled Machines
- Robot
- Manufacturing Cell
- Flexible Manufacturing System
Continuous and Semi Continuous Operations
-
Continuous Processing β A system that produces highly uniform products or continuous services, often performed by machines. Examples: Processing of chemicals, photographic film, newsprint, and oil products.
-
Repetitive Processing β A production system that renders one or a few highly standardized products or services. Examples: Automobiles, televisions, computers, calculators, cameras, and video equipment.
π Definition β Continuous Processing: A production system that operates without interruption to produce highly uniform products or services, typically using automated machinery.
Intermittent Processing
-
Intermittent Processing β A system that produces lower volumes of items or services with a greater variety of processing requirements.
-
Batch Processing β A system used to produce moderate volumes of similar items. Examples: Paint, ice cream, canned vegetables, magazines, newspapers, textbooks, and user manuals.
-
Job Shop β A system that renders unit or small lot production or service with varying specifications according to customer needs.
π Definition β Batch Processing: A production method where goods are produced in groups or batches, with each batch going through the entire production process together before moving to the next stage.
Automation
Automation refers to machinery that has sensing and controlling devices that enables it to operate automatically.
- Computer Aided Manufacturing (CAM) β The use of computers in process control.
- Numerically Controlled (N/C) Machines β Machines that perform operations by following mathematical processing instructions.
- Robot β A machine that consists of a mechanical arm, a power supply, and a controller.
π Definition β Automation: The use of machinery with sensing and controlling devices that enable automatic operation without direct human intervention for each cycle.
Flexible Automation
- Manufacturing Cell β One or a few N/C machines that produce a variety of parts.
- Flexible Manufacturing System (FMS) β A group of machines designed to handle intermittent processing requirements and produce a variety of similar products.
- Designed to handle intermittent processes
- Offers reduced labor costs and consistent quality
- Higher flexibility compared to hard automation
Disadvantages of FMS:
- Requires longer time for planning and development
- Can handle only a narrow range of parts variety
π Definition β Flexible Manufacturing System: A group of machines designed to handle intermittent processing requirements and produce a variety of similar products with reduced labor costs and consistent quality.
Computer Integrated Manufacturing
Computer Integrated Manufacturing (CIM) refers to the full integration of computer systems throughout a manufacturing organization, connecting all aspects of production including design, planning, production, and distribution.
Operations Strategy with respect to Process Selection
Operations strategy can be fine-tuned regarding process selection. The following strategic points are recommended:
-
Hire and Promote Managers who have both Technical and Managerial Skills β As engineers fail in managerial decisions and managers end up relying on engineers who create "WHITE ELEPHANTS" (expensive, underutilized assets).
-
Flexibility as a competitive strategy β To be incorporated at all levels of the organization.
-
Judicious use of Automation β Unnecessary automation causes an increase in cost and a subsequent increase in product and inventory costs.
β Key Takeaways
Process selection is the strategic decision of how goods or services will be produced, encompassing technology, capacity, layout, and work system design. The make-or-buy decision must balance six factors including capacity, expertise, quality, demand nature, cost, and risk. Production systems range from continuous/high-volume standardized processing to intermittent/low-volume customized job shops, with automation technologies like CAM, CNC, and robots bridging these extremes. Flexible manufacturing systems offer a middle ground with reduced labor costs and consistent quality, but require longer planning time. An effective operations strategy requires managers with both technical and managerial skills, flexibility at all levels, and careful avoidance of unnecessary automation that creates white elephants.
π§ Quick Revision Questions
- What are the three components of an organization's process strategy?
- List four of the six reasons for deciding whether to make or buy a product or service.
- What is the difference between continuous processing and intermittent processing?
- What is a Flexible Manufacturing System (FMS) and what are its two main disadvantages?
- What does "judicious use of automation" mean in operations strategy, and what is a "white elephant"?