π Lecture 23 β Introduction
π Overview: This lecture addresses the crucial strategic area of service recovery β the effort to fix service failures. It explains that even the best companies experience failures, making a well-designed recovery system essential. The lecture explores different types of complainers, their expectations for fair treatment, and outlines several powerful recovery strategies that can turn dissatisfied customers into loyal ones.
ποΈ Topics Covered
The lecture begins by defining service recovery and its benefits, including increased customer satisfaction and a path toward operational perfection. It then categorizes different types of complainers (Passives, Voicers, Irates, Activists) and explains their expectations regarding outcome, procedural, and interactional fairness. The core of the lecture is dedicated to detailing recovery strategies: doing it right the first time (Fail Safe), encouraging complaints, acting quickly, treating customers fairly, and learning from failures. It concludes by examining the major causes of customer defection.
π Lecture Summary
Introduction
Service recovery is a strategic effort to fix a service failure. Even the best companies with the best intentions can experience failures, making a well-designed system for coping with these situations necessary.
Benefits of recovery
- More satisfaction: Good recoveries can make customers more loyal than they would have been if no failure had occurred. The impact can turn dissatisfied customers into satisfied, loyal ones who are more likely to return.
- Brings in perfection: Effective recovery strategies drive providers toward doing things right the very first time, forming the basis for a continuous improvement program.
Types of complainers
Different customers respond to complaints in different ways; some do not complain at all.
- "Passive" customers: They feel negative emotions (anger, disappointment) but do not complain, viewing it as against their values or not worth the effort. They are a real threat because they do not give the company a chance to fix the problem, do not spread negative word-of-mouth, but simply switch suppliers.
- "Voicers": They complain directly to the provider. They do not complain to third parties or spread negative word-of-mouth, believing complaining is their right and a social benefit.
- "Irates": They are more likely to spread negative word-of-mouth and switch suppliers. They are more harmful than Passives or Voicers as they damage the company on two fronts.
- "Activists": They have the most stubborn stance, complaining to everyone (provider, associations), spreading negative word-of-mouth, and switching suppliers. They may also file a lawsuit.
Expectations of complainers
Complainers expect fair treatment, which is divided into three themes: Outcome fairness, Procedural fairness, and Interaction fairness.
- Outcome fairness: This is the amount of compensation (e.g., free service, discount, replacement) that customers believe is equal to their suffering. They demand equity. Example: A hotel staff must offer a better room or discount if a guest had to wait for an unready room. A waitress must replace foul-smelling or stale food.
- Procedural fairness: Customers expect complaint procedures to be straightforward, easy, and customer-friendly. Complicated procedures add to their misery and discourage complaints. Customers expect providers to be adaptable and spontaneous to their individual complaints.
- Interaction fairness: This is about how customers are treated when lodging a complaint. They want to be treated in an extra-nice manner. This requires a balance between adaptability and empowerment. An untrained employee with no power to take responsibility will create a scene. Employees must be knowledgeable, courteous, and considerate.
Recovery Strategies
Fail Safe β Do it right the first time
This is the best strategy: avoiding giving customers a cause for complaint. While difficult to implement perfectly, it offers serious companies the goal of "zero defections". To achieve this:
- Employees must understand the lifetime value of a customer (Amount spent Γ No. of orders Γ Lifetime).
- Employees must understand the loss of revenue from defections and the cost of acquiring new customers.
- Employees must be educated to detect defectors by sensing declining sales and signs of dissatisfaction.
- Employees must be given incentives and bonuses to control defections.
π Definition β Lifetime Value of a Customer: The total amount a customer is projected to spend over their entire relationship with a company. π Formula: Lifetime Value = Amount spent per order Γ Number of orders per time frame Γ Customer lifetime π Example: If a customer spends $100 per order, makes 4 orders per year, and is projected to stay with the company for 12 years, their lifetime value is $4,800.
Encourage complaints
Companies must proactively seek complaints.
- Complaint solicitation: Ask customers about their perceptions of service. This can be done through research methods like "Complaint Solicitation," "Critical Incident Technique," or "Lost Customer Research."
- Angry customers are friends: Angry customers who complain give the company a chance to make things right and bring them back.
- Passive are dangerous: Passives switch suppliers without the company knowing, making complaint solicitation critical.
- Improved processes: Complaints help companies identify and correct flawed processes. Companies should install toll-free numbers and internet support to make registering complaints easy. Executive listening is a strategy for this purpose.
Act Quickly
Quick action on a complaint demonstrates the company's commitment to resolution.
- Recovery skills: Staff must be trained to identify the root cause of a problem, find a solution, and take initiative for its resolution.
- Runaround: Routing customers through different personnel to lodge a complaint is frustrating and a sure way to lose the customer.
- The first one takes the complaint: Any staff member in contact with the customer can take the complaint and responsibility for its resolution. This requires empowerment and a clear "customer-first" objective.
- Empowerment with tools and resources: Empowered employees must be given the tools and resources needed to fix the problem.
- Empowerment with incentives: Empowerment should be coupled with incentives for staff to quickly resolve customer problems. A database of dissatisfied customers is an excellent tool for maintaining contact, improving processes, and bringing about future changes.
Treat Customers Fairly
Companies should strategically follow the three elements of fair treatment:
- Fair outcome
- Fair processes with no complications
- Fair treatment when customers come with complaints
Learn from recovery and lost customers
Recovery is an opportunity to record information about complaining customers and become the basis for improving processes. "Lost Customer Research" must be employed to trace the reasons for defections, especially in B2B situations where the loss of a single profitable customer can be a significant dent in revenue.
Causes of defection
According to research, there are eight major causes of defection, bracketed into three areas:
-
Company prompted:
- Pricing (high price, frequent increases, unfair/deceptive pricing)
- Inconvenience (poor location, unsuitable hours, waiting)
- Core service failure (service mistakes, billing errors)
-
Strategy prompted:
- Encounter failures (impolite, unresponsive, unknowledgeable staff)
- Response to service failure (negative response, no response, no positive outcome, complicated procedures)
- Ethical problems (cheating, unsafe conditions, conflict of interest)
-
Market prompted:
- Competition (competitor performs better, offers better attractions)
- Involuntary switching (provider moved or closed down)
π‘ Why this matters: Understanding these defection categories allows a company to be self-critical and systemically address the root causes of customer loss, moving from reactive recovery to proactive retention.
Summary
Lapses occur, so every company must be prepared to recover from service failures. Effective recovery can convert disgruntled customers into loyal ones. Companies must stage recovery quickly, with simple procedures and fair treatment. Finally, companies must learn from their mistakes and understand the factors responsible for defections to do things right the first time.
β Key Takeaways
The single most critical takeaway is that effective service recovery can turn a dissatisfied customer into an even more loyal one, making it a vital strategic tool. To achieve this, managers must understand the four types of complainers (Passives, Voicers, Irates, Activists) and the three dimensions of fairness (Outcome, Procedural, Interactional) they expect. The "Fail Safe" strategy of doing it right the first time is the ultimate goal, but for inevitable failures, a company must have a system to encourage complaints, act quickly, and treat customers fairly. A recovery system is incomplete without a process to learn from failures and lost customers by analyzing the company, strategy, and market-prompted causes of defection to improve future operations.
π§ Quick Revision Questions
- What are the three core benefits of effective service recovery for a company?
- Explain the difference between a "Passive" complainer and an "Irate" complainer. Which one poses a greater threat and why?
- What are the three types of fairness (procedural, outcome, interaction) that complaining customers expect? Give a brief example for each.
- Describe the "Fail Safe" recovery strategy. What is its ultimate goal, and what concept (formula) must employees understand to support it?
- List the eight major causes of customer defection as identified by the American Marketing Association research, categorized under "Company prompted," "Strategy prompted," and "Market prompted."
π Lecture 24 β Service Guarantees and Service Design
π Overview: This lecture explores two critical areas in services marketing: the strategic use of service guarantees and the importance of service design. Understanding guarantees helps providers reduce customer risk and build confidence, while proper service design is essential for closing the gap between management perceptions and actual service standards.
ποΈ Topics Covered
The lecture begins by examining service guarantees, including their definition, benefits, types (satisfaction and attribute guarantees), and characteristics of effective guarantees. It then discusses situations for and against offering guarantees. The second half shifts to service design, explaining its significance in closing Gap 2, the incompatibility of design with customer expectations, and the role of physical evidence in supporting service standards.
π Lecture Summary
Service guarantees
A guarantee is an assurance of quality or length of use of a product, often with a promise of reimbursement. Once popular among manufactured goods, they are now gaining ground among service products as effective tools of marketing and product quality and authenticity. Effective guarantees complement a companyβs recovery strategies and go a long way in repairing the damage that otherwise could be caused.
π Definition β Guarantee: An assurance of quality or length of use of a product, often with a promise of reimbursement.
Benefits of guarantees
Focus on customers: A guarantee lets a company maintain focus, since it is committed to deliver those aspects of service that are guaranteed. Companies should be very specific about the aspects that are to be guaranteed. It is obvious that the guaranteed aspects should be the ones that concern the customers most. Some companies give an overall guarantee of total satisfaction; it may not serve the purpose under all circumstances, for it falls short of defining what is reimbursable. However, if a company is confident of the totality of features and delivery of its service as of extremely high quality with a proven record of customer acceptance, then this guarantee may work.
It sets clear standards for the organization: Due to the focus on customer for reimbursement and the commitment to deliver, it brings the staff under pressure of delivering a service exactly the way it is designed for delivery.
It improves employeesβ behavior: It binds them to the standards that must be met. The promises made with the customer come under a renewed focus and employees take that as a challenge.
It generates quick and relevant feedback from the customers: It makes customers less withdrawn and shy in lodging complaints, for it spells out the attributes on which they can lodge complaints. It therefore becomes the basis of specific complaints and lets the company generate information relating to those aspects that really matter to customers.
It offers a quick opportunity for the company to recover a failed service: As a result, it becomes the basis of continuous improvements in the system.
It elevates morale of the employees: Quality service and efficient delivery keep invocation of guarantees away. When there are fewer instances of invocation, employees feel proud of the service they are rendering. It makes them more enthusiastic and committed to the delivery of good service. What really becomes the basis of this high morale and confidence is the fewer incidences of complaints and recoveries that lessen the costs involved.
It makes customers more confident of the service: Customers who are always uncertain during the pre-purchase phase become confident, owing to the companyβs confidence in its service product. It lessens the risk factor and leads to positive evaluation on the part of the customer.
π‘ Why this matters: All in all, guarantees become a good source of confidence for the customer, employees, and lead to better financial results for the company.
Types of guarantees
There are different types of guarantees, and it is the responsibility of management to offer a guarantee that is the most appropriate under the circumstances the company is operating.
Satisfaction guarantees: These are very global in nature, and the provider is supposed to reimburse due to any aspect of service or dimension of the accompanying product not falling on the customerβs merit. Such guarantees are either given by extremely successful corporations or end up in confusion.
Attribute guarantees: These guarantees center upon those aspects and dimensions that really matter to the customers, meaning the ones prioritized by customers as important. A better form of a guarantee is assurance on overall satisfaction along with specifying the attributes that are subject to reimbursement.
π Definition β Attribute Guarantee: A guarantee that focuses on specific aspects or dimensions of service that customers prioritize as important.
Characteristics of effective guarantees
Unconditional: The guarantee has to be without any strings attached. It must be reimbursed without any conditions if a provider wants customers to have confidence in the service. Some guarantees are prepared with the intention of making them look like a legal document that must make it difficult for customers to invoke the guarantee. Smartness lies not in keeping customers from invoking it; it rather lies in winning them over.
Meaningful: The guarantee must carry those elements that matter to customers, and reimbursement must be made on them to cover dissatisfaction.
Easy to understand: It should be stated in a very simple, lucid manner so it can be understood equally well by the customers as well as the employees.
Easy to invoke and collect: The customer should not be put into a test situation by having to go through a red tape of procedures to collect the guaranteed amount. It becomes self-defeating, giving the customer the impression that the company is not willing to reimburse and hence is not sincere. This might look too customer-friendly at the cost of the service sellerβs interests.
Against the guarantee - A guarantee must not be extended when:
- When the existing quality is poor. Guarantee works best when providers are absolutely sure of the core quality and it is invoked in isolated incidences.
- When it costs more than it benefits if there are quality problems with the core of the service.
- It is at odds with company image. When the provider already has a poor quality image, the presence of a guarantee might become counter-productive. Customers start questioning the rationale behind the guarantee.
For the guarantee β It should be extended when:
- Customers perceive little risk in buying the service. When the service is inexpensive, a guarantee may work as a promotional tool.
- There is great variability in service quality from different providers, and your company happens to be the first one to offer a guarantee on a quality service.
π Example: A restaurant offering an "attribute guarantee" might specifically guarantee that food will be served within 20 minutes or it is free, rather than offering a vague "satisfaction guarantee" on the entire dining experience.
Closing of Gap 1
With the understanding of marketing research, segmentation, relationship marketing, and recovery, we are now in a position to minimize gap 1. Marketing research provides us with excellent tools to reveal certain important facts about our service on a continual basis for corrective actions and improvements. A critical understanding of segmentation is important for insight into not just different segments, but also subtle variations within an overall segment. Due to the factor of heterogeneity, sellers must be sensitive to development of relationships with the right segments of their customers. A careful consideration of recovery strategies brings sellers to a point where they have an excellent chance to compensate for their mistakes and win the customers back over in their favor. All these areas lay an effective ground for understanding what really is expected by the customer, leaving sellersβ assumptions about what customers should expect to rest.
Gap 2
Our understanding of the above takes us forward into the significance of service design, an area the study of which will help us look into strategies for closing gap 2 β the gap between management perceptions and specifications/standards.
The significance of design
The right design of a service product is vital toward developing the right specifications and standards, in the absence of which we may not be able to close gap 2. Service design lays the ground for standards and specifications and therefore is the foundation stone of the strategic effort toward minimizing this gap. Everything in this phase starts with an accurate design for the service product. For not being tangible, service products are a little more difficult to design as compared with manufactured goods. They cannot be drawn on drawing boards and produced as prototypes for customersβ reaction.
Incompatibility of design with expectations
For the reason that providers generally have a tendency to view services with a sense of oversimplification, incompleteness, subjectivity, and biased interpretation, they tend either not to come up with the required design standards or establish the ones that are insufficient and parsimonious. This behavior stems from the fundamental characteristics of services. If sellers were dealing with tangibles, they would be forced to come up with a prototype model or make a competitive product as the benchmark. Services being invisible and highly variable from sale to sale, providers think such standards are not required. Even if they are convinced of their requirement, they think their staff is accustomed to delivering the service in a certain established way and hence it will be impossible to change their behavior and install the required standards.
Lack of good quality standards is interpreted as a lack of high commitment to service by the management. The front staff therefore delivers something that is below customersβ standards and hence causes a gap. The need is not just to have good standards, but the ones defined by the customers β meaning a reflection of customersβ expectations and not the ones defined by the company to achieve high efficiency and productivity.
None of the assumptions can be offered as a defense against the traditional behavior; the providers of services have to come up with a design that reflects customersβ expectations. They can have tools at their disposal to come up with the right design that is a reflection of customersβ expectations.
The physical evidence
To support the right design accompanied by the right standards, providers need to have the right physical evidence that includes business cards, stationery, the office dΓ©cor, uniforms, and signage, etc. Our understanding of the three factors of the right design, the right standards, and the right physical evidence will let us minimize gap 2.
π Definition β Physical Evidence: The tangible cues that support service design and standards, including business cards, stationery, office dΓ©cor, uniforms, and signage.
β Key Takeaways
Service guarantees are powerful marketing tools that reduce customer risk and build confidence when they are unconditional, meaningful, easy to understand, and easy to invoke. They benefit the company by focusing on customers, setting clear standards, improving employee behavior, generating feedback, enabling recovery, elevating morale, and building customer confidence. However, guarantees should not be offered when quality is poor, when costs outweigh benefits, or when the company has a poor image. The second critical area is service design, which must accurately reflect customer expectations to close Gap 2 (between management perceptions and service specifications). Effective design requires overcoming the tendency toward oversimplification and must be supported by appropriate physical evidence such as dΓ©cor, uniforms, and signage.
π§ Quick Revision Questions
- What are the seven benefits of offering a service guarantee?
- What is the difference between a satisfaction guarantee and an attribute guarantee?
- Name the four characteristics that make a service guarantee effective.
- In what three situations should a guarantee NOT be extended?
- Why is service design more difficult for services than for manufactured goods, and what problem does poor design cause?
π Lecture 25 β Introduction
π Overview: This lecture addresses the critical challenge of developing proper service design and standards by overcoming assumptions and variability. It emphasizes a systematic, objective approach to new service development, outlines a growth strategy matrix, and details a structured planning process to ensure service design meets customer expectations.
ποΈ Topics Covered
The lecture covers the challenges of oversimplification, incompleteness, subjectivity, and biased interpretation in service design. It explains the characteristics and benefits of a systematic new service development program, the necessity of involving both employees and customers, the stages in new service design including business strategy and growth strategies using a product-customer matrix, and the front-end planning process of idea generation and service concept development.
π Lecture Summary
Introduction
Based on the understanding that development of standards is often neglected, this lecture teaches how to proceed with the right design of a service to ensure correct standards. The characteristic of variability and certain assumptions by service providers prevent proper service design and standards. Providers experience a set of symptoms and disorders offering challenges like oversimplification, incompleteness, subjectivity, and biased interpretation. Many required steps for design and standards are left undefined, with the assumption everyone understands them. The development process must be systematic, leaving no dimensions unattended.
The new service development
Characteristics
The development program must be well-planned and successful. The four characteristics of this process are:
- It must be objective and not subjective
- It must be precise and not vague
- It must be fact-based and not opinion-based
- It must be methodological and not philosophical
Benefits
Achieving these characteristics results in superior strategic effort (human resources, R&D), superior process operations (pre-launch, technological support), the right choice of market segments, and a service product that meets customer needs with technological sophistication and a competitive advantage.
Involvement of both employees and customers
The development program requires involving both employees and customers. Front-end employees, being psychologically and physically close to customers, can better illuminate customer expectations and real standards. They can discuss issues and provide valuable input. Customers, as part of the production process, should also be asked how they feel about the serviceβs features and delivery. Qualitative research is important here for defining product development issues.
Stages in New Service Design
This strategic area comprises steps also applicable to tangible goods, similar in concept and sequence but different in implementation. It starts with the vision and mission for the business strategy, leading to service strategy development, which grounds the development of the right service product and operational position. The vision is the destination, while the mission is the things at hand to reach it. The new service strategy is developed by defining the scope of the new service portfolio, classifying services to determine the nature of the service product, and defining/reviewing organizational structure and cross-functional relationships for ownership across the organization.
The new service(s) is developed in view of goals for revenues, market segmentation, market size/growth, and profitability. These goals help generate ideas about growth patterns from focusing on existing services (improvements) or introducing new services, and on existing customers or new customers. This is explained with a matrix (Figure 41):
- Existing Products-Existing Customers: Build market share by increasing existing consumption or attracting more segments. ServQual can pinpoint the need to add segments.
- Existing Products-New Customers: Focus on developing markets with better outreach and distribution.
- New Product-Existing Customers: Offer new products/features for a wider portfolio, starting with "Platinum" customers and having appeal for "Gold" ones. Start by approaching apostles followed by indifferent customers.
- New Products-New Customers: A greater strategic challenge, met after attracting existing customers who can bring in new customers. Use the reputation and brand power of the service brand. π‘ Why this matters: This matrix helps companies choose a growth path based on their resources, existing customer base, and product capabilities.
Which way to go?
The growth strategy offers different scenarios (Figure 42). Based on company resources and market needs, the company decides which way to go. Facts from marketing research should form the basis of the strategic direction.
Planning process
The strategic direction leads to the new service strategy, which then guides a step-wise planning process (Figure 43), divided into two parts: front-end planning and implementation.
Front-end Planning
- Idea Generation: Screening ideas from a collection. Techniques include idea solicitation from customers/employees, research (lead and market scanning), and competitive offerings. A department should be created for this purpose, responsible for generating ideas, assembling teams for screening, and ensuring the idea aligns with market needs and the companyβs resource limitations and capabilities.
- Service Concept Development and Evaluation: A description of the need and its fulfillment dimension in relation to the service. Companies develop the concept of what need the service will fulfill and how. The stark difference due to intangibility means no drawing board or pictorial exists; the concept must be developed through consensus of all who matter in the company, with opinions converging on the same point. After the concept, a clear definition of what the service will do, the need it addresses, complete documentation of the process, and its features is discussed for consensus and evaluation. The roles of employees and customers are discussed before presenting to them to see if they understand the serviceβs aim.
Summary
Companies should carefully choose their growth path by considering existing products, their capability to introduce new products relative to resources, their current customer base, and the one they envisage. After gaining clarity on the growth path, they should systematically follow the service development process, leaving nothing to assumptions.
β Key Takeaways
- Service design fails when it is oversimplified, incomplete, subjective, or based on biased interpretation; a systematic, objective, precise, fact-based, and methodological development process is essential.
- Both front-end employees and customers must be actively involved in the development process to ensure the service meets real expectations and standards.
- Growth strategies can be planned using a four-quadrant matrix based on focusing on existing or new products in combination with existing or new customers, with the choice guided by marketing research.
- The new service development process involves a structured front-end planning phase that begins with systematic idea generation and is followed by rigorous service concept development and evaluation.
- The concept for a service, unlike a tangible product, cannot be drawn; it must be developed through consensus across the organization, with complete documentation of its need, features, and process.
π§ Quick Revision Questions
- What are the four common challenges (symptoms) that undermine service design and standards?
- List the four key characteristics that a new service development program must possess.
- Explain the four-quadrant matrix for growth strategies based on existing/new products and customers.
- What are the two main stages of the front-end planning process in new service design?
- Why is it difficult to develop a "service concept" compared to a product concept for a tangible good?
π Lecture 26 β Services Marketing: Service Design and Blueprinting
π Overview: This lecture continues the planning process for designing a service of right standards and specifications. It covers the front-end planning and implementation stages of new service development, followed by the detailed process of blueprinting. Understanding these concepts is crucial for ensuring service quality, operational efficiency, and customer satisfaction through systematic design.
ποΈ Topics Covered
The lecture first covers the front-end planning stage of business analysis, then moves into implementation stages including service development and testing, market testing, commercialization, and post-introduction evaluation. The latter half of the lecture introduces the concept of service blueprinting, its four components (customer actions, onstage employee actions, backstage employee actions, and processes), how to read a blueprint, and a checklist for preparing one.
π Lecture Summary
Introduction
This lecture is a continuation of the planning process followed for designing a service of right standards and specifications.
Front-end planning
Business Analysis: As the term suggests, this step takes us into sales projections and complete feasibility of the service including things like pricing, costs, margins and all related financials. The strategic implications of HR measures in terms of new staff hiring, training, and any displacements and relocation of staff are also considered.
Implementation
Service Development and Testing: As against service concept that outlines the strategic aspects of the service along with features, this stage deals with all the details of itemized points. For example, if a restaurant talked about the need to start offering a direct delivery service as an enhanced feature in the concept stage, the management has got to pinpoint all the points of interaction and the details of delivery from taking the order to communicating the same to the kitchen to preparation to handling of delivery.
The documentation of all points of sales, operations, supply chain, and administrative matters should be done comprehensively for the sake of clarity, completeness, and objectivity. The objective here is to see to it that challenges of service design are met. To seek consensus, the management needs to place the complete documentation before all concerned, who are representatives of all departments. Consensus becomes the basis of implementation plan that should be put in place for all activities. Once in place, the plan should be implemented by involving employees and customers for staging exercises of order taking and execution of the service. This step is extremely significant for the reason that service development, design, and delivery are much intertwined.
Market Testing: This is again a challenging situation in services. Because of the fact that services are inseparable, there is no way to test a service in isolation. For the fact that delivery takes place at the time of production, we cannot make a service, store it and then test run it in a market of your choice. Also for the fact that distribution points are not too many in most of the services, a new or a redesigned service has to be tested along with the services that are being sold from the existing point(s). To meet this challenge, providers have one choice available to them to keep the test limited by selling the service to employees and their families.
π Example: Banks get into such an exercise. A foreign bank in the country (HSBC in 2008) test marketed its credit card by first launching it among its employees and their families to look into the operational smoothness or the lack of it during the test stage.
Commercialization: At this stage the service hits the target market intended for sale. Once on sale, there are two important objectives to achieve:
- Making sure that it has the support and enthusiasm of the staff that is selling it. Assessing any lapses of internal marketing that may need to be fixed to have everyone on the same page is part of the objective.
- Tracking sales and maintaining complete records of customers to follow developments during encounters.
Post-introduction Evaluation: A vigorous follow-up is needed to track developments in this phase. This is the stage that moulds future behavior of customers. Management brings about any adjustments to improve delivery, costs, and operating efficiencies. At the same time, managers assess the need to cause any changes required to the variables of marketing mix. The review process must be institutionalized for the reason that it helps in enhancing the service quality and its delivery.
π‘ Why this matters: Post-introduction evaluation is critical because it directly shapes customer retention and loyalty by allowing continuous improvement.
Blueprinting
Just like in manufacturing a product is produced after a deliberate process of planning and designing with detailed specifications, services should also be designed in a likewise way to ensure nothing remains short of consideration and deliberation.
Blueprinting is a process that highlights by way of a process flow diagram the service system so that the people who are to execute the service can understand their roles. Also, the company can ensure that no roles are omitted. The systematic process is portrayed in a way that the roles of customers, employees, and the processes that support those roles are spelled out to explicitly define each and every step of the service delivery.
Components of a blueprint
Since the blueprint shows the whole process, we must understand the components that it highlights and how those are depicted on it in a way that a service delivery can be understood with clarity on the paper. There are four components to it:
- Customer actions
- Onstage actions of the employees
- Backstage actions of the employees
- Processes
Customer actions: These are the steps, actions, and the interactions performed by customers during purchasing, consumption, and evaluation. A customer walking into a courier service hands over his parcel with certain requests; a customer seeking a medical test requests first an appointment, visits the facility, goes through certain pre-consulting tests administered by the support staff of the doctor, meets with the doctor, gets back to the staff to get reports and interacts for further appointments. Only when we are blueprinting all the steps involved in the process, do we realize how comprehensive could be the execution, interactions at various points, and the need to have the right staff.
Onstage employee actions: These are all those actions by the employees that are taken during interaction with the customers. In the above example of courier, employeesβ actions will be inputting of the relevant information into the system in relation to destination and sorting, weighing the package, giving the receipt to the customers etc.
Backstage employee actions: These are all those actions taken by employees not visible to the customers. This could be interactions at various points between employees toward performance of the system. Actual sorting of packages for transportation to a centralized collection point for onward delivery could be just one.
Processes: These are the activities and tasks, internal interactions and relevant steps performed in support of the service delivery. In the above examples, it would be all those tasks mentioned in relation to backstage activities. In case of the medical examination all the test reports preparation and diagnostics are processes that support the service delivery.
The components discussed above are depicted in figure 44 as a blueprint. Each component is a different level. The top level is portrayed by the line of interaction, signifying that all customer actions take place above this line owing to the interaction with the employees. Another feature of this print is that we can see an interaction take place the moment a vertical line crosses the horizontal line.
The next horizontal line is the line of visibility that separates visible (onstage) activities from those of backstage. This is the evidence of service to customer and is created in light of the nature of the service and the appeal it may have for the customer. This is exemplified by some of the fast food restaurants and coffee shops. Such setups have their show kitchens operating very much in visibility of the customer.
The area below the line of visibility is that of processes, which support the service delivery and are performed by the support staff that may or may not be visible to customers. This area is represented by interactions between employees of the company. Vertical lines here as well represent internal encounters.
The above explains the basic flow that may characterize a blueprint. With complete explosion of all activities, we can see in even more detail the interactions and the tasks involved therein. It will show us where and how much customers are involved; who helps the customer; how many people we need to help him; what kind of relationships are defined among the staff that support each other to deliver the service; and, how many staff members we need to do different tasks etc.
π Definition β Line of Interaction: The horizontal line in a service blueprint that separates customer actions (above) from all employee actions and processes (below). Every time a vertical line crosses this horizontal line, it signifies a moment of interaction between the customer and the service provider.
π Definition β Line of Visibility: The horizontal line in a service blueprint that separates onstage (customer-visible) employee actions from backstage (non-visible) employee actions and support processes. Everything above this line is visible to the customer and represents the "evidence of service."
π Blueprint Structure: [Top β Line of Interaction β Customer Actions / Onstage Employee Actions / Line of Visibility β Backstage Employee Actions / Support Processes] β This structure allows a company to map all touchpoints, interactions, and internal tasks required for flawless service delivery.
π Example: In a fast-food restaurant blueprint β Above the line of interaction: customer places order at counter (customer action). Crossing the line of interaction: order is taken by cashier. Above the line of visibility: cashier enters order into POS system and cooks assemble burgers in open kitchen (onstage). Below the line of visibility: kitchen staff prepare fresh patties and sauces (backstage), and managers schedule inventory reorders (support process).
Reading a blueprint
Horizontal reading shows us customer actions and support to those by the staff; vertical actions represent interaction among staff to deliver the service. The overall reading offers an integrated view of the service.
The checklist of blueprint preparation
Following are some of the important points that we must consider while coming up with a blueprint:
- Identify the process.
- Identify the customer and the segment you are dealing in.
- Map all actions starting with customerβs initiation of the purchase process β keep focus on the customer.
- Map contact employee actions above the line of visibility, onstage as well as backstage and the processes.
- Link contact activities and define the support function.
- Add evidence of service at every step β documents etc.
Service blueprinting is an excellent exercise in portraying all the tasks involved in a process and then dividing them according to the components of the blueprint. The components let us understand with more clarity not just the comprehensiveness of the process, but also the relationships between employees whose collective effort it is to deliver the service. It goes further into determining the load of work on each one of the component and helps management decide the strength of people for various tasks thereby indicating the human resource requirement.
The foregoing provides a good basis to ensure that we generate all the relevant information and identify activities and tasks to be performed. This in turn leads us into devising the right structure for the departments concerned. A collection of all the processes becomes the overall pool of process flows with relevant documentation. Needless to say, the overall structure of the organization is a reflection of all the company processes.
π‘ Why this matters: Blueprinting transforms abstract service concepts into concrete, visual workflows. This ensures no step is missed, roles are clearly defined, and resource allocation is optimized, directly impacting service quality and operational efficiency.
Summary
The design of a service has to be a systematic effort. While we go through the stages of front-end planning and implementation, we cannot escape development of the relevant processes. Processes should be developed with the help of blueprinting, which again is a systematic exercise to ensure optimal efficiency of procedures. Efficient procedures not only save costs for the companies, but also are customer-friendly.
β Key Takeaways
- Service development follows a structured process from front-end planning (business analysis) through implementation stages (development, market testing, commercialization, and post-introduction evaluation) to ensure feasibility, operational readiness, and continuous improvement. 2. Market testing in services is uniquely challenging due to inseparability, so providers often use employees and their families as a test market to assess operational smoothness before full launch. 3. Service blueprinting is a critical design tool that visually maps all four components of service delivery: customer actions, onstage employee actions, backstage employee actions, and support processes, separated by the line of interaction and line of visibility. 4. The line of interaction separates customer actions from employee actions, while the line of visibility separates what customers see (onstage) from what they do not see (backstage and processes). 5. A complete blueprint reveals customer involvement, staff relationships, workload distribution, and human resource requirements, ultimately guiding the design of departmental structures and ensuring efficient, customer-friendly processes.
π§ Quick Revision Questions
- What are the four main stages of implementation in the service development process, and what is the key challenge of market testing for services?
- What are the four components of a service blueprint, and which horizontal line separates onstage actions from backstage actions?
- How do you read a service blueprint both horizontally and vertically, and what does each reading reveal?
- List the six steps in the checklist for preparing a service blueprint.
- Why is post-introduction evaluation considered critical for shaping future customer behavior and service quality?