π Lecture 35 β Money Multiplier
π Overview: This lecture explains how the money multiplier expands the monetary base into the total money supply through the banking system. It examines the relationships between reserves, deposits, and currency while introducing key ratios that determine the money multiplier's size. Understanding this concept is crucial for comprehending how central bank actions affect the overall money supply.
ποΈ Topics Covered
The lecture begins with the simple deposit expansion multiplier and the relationship between reserves and deposits. It then introduces the money multiplier formula and shows how the quantity of money relates to the monetary base. The lecture examines the excess reserve ratio and currency ratio, showing how these affect the multiplier. It concludes with the central bank's monetary policy toolbox, focusing on the target federal funds rate, discount rate, and open market operations.
π Lecture Summary
Money Multiplier
Assuming no excess reserves are held and there are no changes in the amount of currency held by the public, the change in deposits will be the inverse of the required deposit reserve ratio (r_D) times the change in required reserves, or βD = (1/r_D) βRR. Alternatively, RR = r_D D or βRR = r_D βD. For every dollar increase in reserves, deposits increase by 1/r_D. The term (1/r_D) represents the simple deposit expansion multiplier. A decrease in reserves will generate a deposit contraction in a multiple amount too.
The money multiplier shows how the quantity of money (checking account plus currency) is related to the monetary base (reserves in the banking system plus currency held by the Nonbank public). Taking m for money multiplier and MB for monetary base, the Quantity of Money, M is:
- M = m x MB (This is why the MB is called High Powered Money)
π Definition β Simple Deposit Expansion Multiplier (1/r_D): The multiple by which deposits increase for every dollar increase in reserves, assuming no excess reserves and no currency holdings by the public. π Formula: βD = (1/r_D) βRR β The change in deposits equals the reciprocal of the reserve requirement times the change in required reserves.
Consider the following relationships:
- Money = Currency + Checkable deposits: M = C + D
- Monetary Base = Currency + Reserves: MB = C + R
- Reserves = Required Reserves + Excess Reserves: R = RR + ER
The amount of excess reserves a bank holds depends on the costs and benefits of holding them. The cost is the interest foregone. The benefit is the safety from having the reserves in case there is an increase in withdrawals. The higher the interest rate, the lower banks' excess reserves will be; the greater the concern over possible deposit withdrawals, the higher the excess reserves will be.
π‘ Why this matters: The money multiplier explains how initial injections of reserves by the central bank can create much larger increases in the total money supply through the banking system.
Introducing Excess Reserve Ratio {ER/D}
R = RR + ER = r_D D + {ER/D} D = (r_D + {ER/D}) D
The decision of how much currency to hold depends on the costs and benefits, where the cost is the interest foregone and the benefit is the lower risk and greater liquidity of currency. As interest rates rise cash becomes less desirable, but if the riskiness of alternative holdings rises or liquidity falls, then it becomes more desirable.
Now taking Currency Ratio as {C/D}: MB = C + R = {C/D} D + (r_D + {ER/D}) D = ({C/D} + r_D + {ER/D}) D
This shows that the monetary base has three uses: Required reserves, Excessive reserves, and Cash in the hands of nonbank public.
π Definition β Excess Reserve Ratio ({ER/D}): The ratio of excess reserves held by banks to their checkable deposits. π Definition β Currency Ratio ({C/D}): The ratio of currency held by the nonbank public to checkable deposits.
Deposit Expansion with Excess Reserves and Cash Withdraws
D = [1 / ({C/D} + r_D + {ER/D})] x MB
M = [{C/D} + 1 / ({C/D} + r_D + {ER/D})] x MB
The Quantity of Money (M) Depends on:
- The Monetary base (MB), Controlled by the central bank
- Reserve Requirements
- Bank's desired to hold excess reserves
- The public's demand for currency
The quantity of money changes directly with the base, and for a given amount of the base, an increase in either the reserve requirement or the holdings of excess reserves will decrease the quantity of money. But currency holdings affect both the numerator and the denominator of the multiplier, so the effect is not immediately obvious. Logic tells us that an increase in currency decreases reserves and so decreases the money supply.
π Formula (Money Multiplier): m = [{C/D} + 1] / [{C/D} + r_D + {ER/D}] β Shows how each factor affects the expansion of the monetary base into total money supply.
Table: Factors Affecting the Quantity of Money
| Factor | Who controls it | Change | Impact on M |
|---|---|---|---|
| Monetary Base | Central bank | Increase | Increase |
| Required reserve-to-deposit ratio | Bank regulators | Increase | Decrease |
| Excess reserve-to-deposit ratio | Commercial banks | Increase | Decrease |
| Currency-to-deposit ratio | Nonbank public | Increase | Decrease |
The Central Bank's Monetary Policy Toolbox
The Central bank controls the quantity of reserves that commercial banks hold. Besides the quantity of reserves, the central bank can control either the size of the monetary base or the price of its components. The two prices it concentrates on are:
- Interest rate at which banks borrow and lend reserves overnight (the federal funds rate)
- Interest rate at which banks can borrow reserves from the central bank (the discount rate)
The central bank has three monetary policy tools, or instruments:
- The target federal funds rate
- The discount rate
- The reserve requirement
π Definition β Federal Funds Rate: The interest rate at which banks borrow and lend reserves to each other overnight. π Definition β Discount Rate: The interest rate at which banks can borrow reserves directly from the central bank.
The Target Federal Funds Rate and Open Market Operations
The target federal funds rate is the central bank's primary policy instrument. The federal funds rate is determined in the market, rather than being controlled by the central bank. The name "federal funds" comes from the fact that the funds banks trade are their deposit balances at the federal reserves or central bank.
The central bank holds the capacity to force the market federal funds rate to equal the target rate all the time by participating directly in the market for overnight reserves, both as a borrower and as a lender. As a lender, the central bank would need to make unsecured loans to commercial banks, and as a borrower, the central bank would in effect be paying interest on excess reserves. The central bank chooses to control the federal funds rate by manipulating the quantity of reserves through open market operations: the central bank buys or sells securities to add or drain reserves as required.
π‘ Why this matters: Open market operations allow the central bank to finely tune the level of reserves in the banking system to achieve its desired federal funds rate target.
β Key Takeaways
The money multiplier (m) transforms the monetary base (MB) into the total money supply (M = m Γ MB), and its size depends on three key ratios: the required reserve ratio, the excess reserve ratio, and the currency ratio. An increase in any of these ratios reduces the money multiplier and therefore the money supply for a given monetary base. The central bank controls the monetary base through open market operations and can influence the federal funds rate by adding or draining reserves from the banking system. The three main policy tools available to the central bank are the target federal funds rate, the discount rate, and the reserve requirement. Understanding that currency holdings, excess reserves, and required reserves each absorb a portion of the monetary base is essential for predicting how changes in behavior by banks or the public affect the money supply.
π§ Quick Revision Questions
- What is the formula for the money multiplier when both currency holdings and excess reserves are present?
- If the required reserve ratio is 10%, the currency ratio is 20%, and the excess reserve ratio is 5%, what is the money multiplier?
- How does an increase in the public's demand for currency affect the money supply, holding the monetary base constant?
- What are the three monetary policy tools available to the central bank, and which one is considered the primary instrument?
- Through what mechanism does the central bank ensure the market federal funds rate equals its target rate?
π Lecture 36 β Target Federal Funds Rate and Open Market Operation
π Overview: This lecture explores how central banks use the target federal funds rate and open market operations to implement monetary policy. It explains the tools available to central banks, including discount lending, reserve requirements, and the federal funds rate, and how these tools are linked to broader economic objectives like low inflation and high growth.
ποΈ Topics Covered
The lecture covers the market for bank reserves and how the central bank targets the federal funds rate through open market operations. It then examines discount lending, the lender of last resort function, and crisis management, including the three types of credit. Reserve requirements and their limitations are discussed, followed by a summary of the central bank's monetary policy toolbox. Finally, the lecture links tools to objectives by explaining desirable features of policy instruments, targets, operating instruments, and intermediate targets.
π Lecture Summary
Target Federal Funds Rate and Open Market Operation
The central bank chooses to control the federal funds rate by manipulating the quantity of reserves through open market operations: the central bank buys or sells securities to add or drain reserves as required. The target rate is set, and the reserve supply is adjusted so that the market federal funds rate meets the target. A diagram shows that the intersection of reserve supply and reserve demand determines the equilibrium market federal funds rate.
Discount Lending, the Lender of Last Resort and Crisis Management
Lending to commercial banks is not an important part of the central bankβs day-to-day monetary policy. However, such lending is the central bankβs primary tool for ensuring short-term financial stability, eliminating bank panics, and preventing the sudden collapse of institutions experiencing financial difficulties. The central bank is the lender of last resort, making loans to banks when no one else can or will, but a bank must show that it is sound to get a loan in a crisis. The current discount lending procedures also help the central bank meet its interest-rate stability objective.
The central bank makes three types of loans: primary credit, secondary credit, and seasonal credit. Primary credit is extended on a very short-term basis, usually overnight, to sound institutions. It is designed to provide additional reserves at times when the dayβs reserve supply falls short of the banking systemβs demand. The system provides liquidity in times of crisis, ensures financial stability, and restricts the range over which the market federal funds rate can move (helping to maintain interest-rate stability). Secondary credit is available to institutions that are not sufficiently sound to qualify for primary credit. Banks may seek secondary credit due to a temporary shortfall in reserves or because they have longer-term problems that they need to work out. Seasonal credit is used primarily by small agricultural banks to help in managing the cyclical nature of farmersβ loans and deposits.
Reserve Requirements
By adjusting the reserve requirement, the central bank can influence economic activity because changes in the requirement affect deposit expansion. Unfortunately, the reserve requirement turns out not to be very useful because small changes have large (really too large) impacts on the level of deposits. Today, the reserve requirement exists primarily to stabilize the demand for reserves and help the central bank to maintain the market federal funds rate close to target; it is not used as a direct tool of monetary policy.
The central bankβs Monetary Policy Toolbox
The lecture provides a table summarizing the tools of monetary policy:
- Target Federal Funds Rate: The interest rate charged on overnight loans between banks. It is controlled by adjusting the supply of reserves through open market operations to meet expected demand at the target rate. Its impact is to change interest rates throughout the economy.
- Discount rate: The interest rate charged by the central bank on loans to commercial banks. It is set as a premium over the target federal funds rate. Its impact is to provide short-term liquidity to banks in times of crisis and aid in controlling the federal funds rate.
- Reserve requirement: The fraction of deposits that banks must keep either on deposit at the central bank or as cash in their vaults. It is set by the central bank within a liquidity-imposed range. Its impact is to stabilize the demand for reserves.
Linking Tools to Objectives
Desirable features of a policy instrument include: easily observable by everyone, controllable and quickly changed, and tightly linked to the policymakersβ objectives. These requirements leave policymakers with few choices, and over the years central banks have switched between controlling the quantity and controlling the prices.
Targets and Instruments
Operating instruments refer to actual tools of policy, instruments that the central bank controls directly. When the central bank targets the quantity of reserves, a shift in reserve demand causes the market federal funds rate to move. An increase in reserve demand forces the interest rate up, while a fall in reserve demand forces the interest rate down.
Intermediate targets refer to instruments that are not directly under the control of the central bank but that lie between their policymaking tools and their objectives (e.g., growth in monetary aggregates). Over the last two centuries, central bankers largely abandoned intermediate targets, having realized that they didnβt make much sense. Instead, policymakers focus on how their actions directly affect their target objectives (e.g., low inflation, high growth), using operating instruments (e.g., interest rates, monetary base) directly.
β Key Takeaways
The central bankβs primary monetary policy tool is the target federal funds rate, which it controls by adjusting the supply of reserves through open market operations. Discount lending, while not a daily tool, is crucial for the central bankβs role as a lender of last resort to ensure financial stability during crises. Reserve requirements are too blunt to be used as an active tool and now mainly stabilize reserve demand. The central bankβs toolbox includes the target federal funds rate, the discount rate, and the reserve requirement, each with a specific purpose and mechanism. Finally, a good policy instrument must be observable, controllable, and tightly linked to final objectives, leading central banks to focus directly on operating instruments rather than intermediate targets.
π§ Quick Revision Questions
- What is the primary mechanism by which the central bank controls the federal funds rate?
- What are the three types of discount loans offered by the central bank, and what is the purpose of each?
- Why is the reserve requirement no longer used as a direct tool of monetary policy?
- What are the three desirable features of a policy instrument?
- What is the difference between an operating instrument and an intermediate target?
π Lecture 37 β Why Do We Care About Monetary Aggregates?
π Overview: This lecture explains the critical relationship between money growth and inflation, demonstrating why central banks must monitor monetary aggregates. It introduces the equation of exchange and quantity theory of money to show how changes in the money supply affect prices and economic activity.
ποΈ Topics Covered
The lecture covers why high inflation is always accompanied by high money growth, introduces the velocity of money and the equation of exchange (MV=PY), explains the quantity theory of money developed by Irving Fisher, shows how money demand is derived from velocity, and discusses the implications for central bank policy including Milton Friedman's constant money growth rule.
π Lecture Summary
Why Do We Care About Monetary Aggregates?
Every country experiencing high inflation has high money growth. To avoid sustained episodes of high inflation, a central bank must be concerned with money growth. The lecture shows a graph plotting average annual money growth against average annual inflation for moderate-inflation countries from 1981-2003, demonstrating a clear positive relationship where countries with higher money growth experience higher inflation.
It is impossible to have high, sustained inflation without monetary accommodation. When currency that people are holding loses value rapidly, they will work to spend what they have as quickly as possible. This has the same effect on inflation as an increase in money growth. However, something beyond just differences in money growth accounts for the differences in inflation across countries.
Velocity and the Equation of Exchange
To understand the relationship between inflation and money growth we need to focus on money as a means of payment.
π Example: Consider four students:
- Ali has Rs. 100 in cash
- Bilal has a Rs. 100 calculator
- Chohan has 2 tickets worth Rs. 50 each for a cricket match
- Dilawer has a set of 25 drawing pencils worth Rs. 4 each
Transactions: Ali buys calculator from Bilal (Rs. 100). Bilal buys tickets from Chohan (Rs. 100). Chohan buys pencils from Dilawer (Rs. 100).
Total Value of transactions = (Rs. 100 Γ 1) + (Rs. 50 Γ 2) + (Rs. 4 Γ 25) = Rs. 300
Generally: No. of Rupees Γ No. of times each Re is used = Rs. Value of Transactions
The number of times each rupee is used (per unit of time) in making payments is called the velocity of money; the more frequently each rupee is used, the higher the velocity of money.
Applying to economy-wide transactions: Quantity of Money Γ Velocity of Money = Nominal GDP
Using data on the quantity of money and nominal GDP we can compute the velocity of money; each monetary aggregate has its own velocity.
π Equation of Exchange: If we represent Money with M, Velocity with V, Price level with P, and Real GDP with Y:
- Nominal GDP = P Γ Y
- Therefore: M Γ V = P Γ Y
π Formula: MV = PY β The equation of exchange provides the link between money and prices.
Rewriting in terms of percentage changes: %ΞM + %ΞV = %ΞP + %ΞY or Money Growth + Velocity Growth = Inflation + Output Growth
The Quantity Theory and the Velocity of Money
In the early 20th century, Irving Fisher wrote down the equation of exchange and derived the implication that money growth + velocity growth = inflation + real growth.
Assumptions:
- No important changes occur in payment methods or the cost of holding money
- Real output is determined solely by economic resources and production technology
Under these assumptions, changes in the aggregate price level are caused solely by changes in the quantity of money.
In other words, assume that %ΞV = 0 and %ΞY = 0. Then doubling the quantity of money doubles the price level.
π‘ Why this matters: This led Milton Friedman to conclude that "Inflation is a monetary phenomenon."
From the four-student example: Number of rupees needed equaled total rupee value of the transaction divided by number of times each rupee was used.
Money Demand = Total Value of Transactions / Velocity of Money
For the economy as a whole: Money Demand = Nominal GDP / Velocity
π Formula: Mα΅ = (1/V) Γ PY β Money demand is inversely related to velocity.
Money Supply (MΛ’) is determined by the central bank and the behavior of the banking system.
Equilibrium means Mα΅ = MΛ’ = M. Rearranging the money demand function gives MV = PY.
The quantity theory of money tells us why high inflation and high money growth go together, and explains why countries can have money growth that is higher than inflation (because they are experiencing real growth).
The Facts about Velocity
Fisher's logic led Milton Friedman to conclude that central banks should simply set money growth at a constant rate. Policymakers should strive to ensure that the monetary aggregates grow at a rate equal to the rate of real growth plus the desired level of inflation.
β Key Takeaways
The critical relationship between money growth and inflation is that every country with high inflation has high money growth, making it impossible to have sustained high inflation without monetary accommodation. The equation of exchange (MV=PY) formally links money, velocity, prices, and output, while the quantity theory of money shows that under normal assumptions, inflation is fundamentally a monetary phenomenon. Velocity measures how frequently money changes hands, and money demand equals nominal GDP divided by velocity. For policymakers, this implies that controlling money growth is essential for controlling inflation, leading Friedman to advocate for constant money growth rules.
π§ Quick Revision Questions
- What is the equation of exchange and what do each of its variables represent?
- According to the quantity theory of money, what happens to the price level if the money supply doubles (assuming constant velocity and output)?
- How is the velocity of money calculated and what does it measure?
- Why did Milton Friedman conclude that central banks should set money growth at a constant rate?
- Using the four-student example, explain how the total value of transactions relates to the quantity of money and its velocity.
π Lecture 38 β The Facts About Velocity
π Overview: This lecture examines the velocity of money, its stability over time, and the critical implications for monetary policy. It explains why Milton Friedman advocated for constant money growth rules and explores the theoretical foundations of money demand, including both the transactions demand and portfolio demand for money.
ποΈ Topics Covered
The lecture covers the relationship between money growth, velocity, inflation, and real growth through the equation of exchange. It discusses why velocity fluctuations complicate monetary policy, presents historical data on M1 and M2 velocity, and explains the transactions demand for money using a cash management example. The lecture also covers the portfolio demand for money and how expectations affect money holdings.
π Lecture Summary
THE FACTS ABOUT VELOCITY
Fisher's logic led Milton Friedman to conclude that central banks should set money growth at a constant rate. Policymakers should ensure monetary aggregates grow at a rate equal to real growth plus desired inflation. Friedman suggested regulatory changes to limit banks' discretion in creating money and tighten the relationship between monetary aggregates and the monetary base. However, even with these recommendations, the central bank could stabilize inflation by keeping money growth constant only if velocity were constant.
In the long run, the velocity of money is stable, though there can be significant short-run variations. From a policymaker's perspective, these fluctuations in velocity are enormous, even assuming the central bank can accurately control the growth rate of M2 and forecast real growth.
The equation of exchange states:
π Formula: Money Growth + Velocity Growth = Inflation + Real Growth
With an inflation objective of 2% and real growth forecast of 3.5%, the equation tells us policymakers should set money growth at 5.5% minus the growth rate of velocity. If velocity increases by 3%, then money growth needs to be 2.5%. If velocity falls by 3%, then money growth needs to be 8.5%.
π‘ Why this matters: When inflation is low, short-run velocity growth can be several times the policymakers' inflation objectives. So to use money growth targets to stabilize inflation, policymakers must understand how velocity changes. Fluctuations in velocity are tied to changes in people's desire to hold money, so policymakers must understand the demand for money.
π Example: Historical data shows M1 and M2 velocity behaved differently from 1959-2003. M1 velocity rose steadily from about 4 to nearly 9, while M2 velocity fluctuated between roughly 1.6 and 2.2 over the same period. Short-run velocity of M2 showed fluctuations of plus or minus 6-8 percentage points in some quarters.
The Transactions Demand for Money
The quantity of money people hold for transactions purposes depends on their nominal income, the cost of holding money, and the availability of substitutes. Nominal money demand rises with nominal income, as more income means more spending requiring more money. Holding money allows people to make payments but has the cost of interest foregone. There may also be costs in switching between interest-bearing assets and money.
π Example: If your monthly earning is Rs.30,000 deposited in your bank each month, and you spend Rs.1,000 each day, after 15 days your checking account balance will decline to Rs.15,000 and to zero on the 30th day. Your bank offers a choice: leave the entire Rs.30,000 in the account or shift funds between checking and a bond fund that pays interest but charges Rs.20 for each withdrawal.
π Definition β Strategy 1 (No shifting): Leave the entire Rs.30,000 in checking. Your bond fund balance is zero throughout the month. Average money holding is Rs.15,000.
π Definition β Strategy 2 (One shift): Transfer half to bond fund at the start, then transfer back at mid-month. You have Rs.15,000 in the bond fund during the first half and Rs.0 during the second half, so your average bond fund balance is Rs.7,500. Making the shift costs Rs.20. If the interest on Rs.7,500 is greater than Rs.20, you should make the shift.
π Formula: Break-even monthly interest rate = Service charge / Average bond fund balance = Rs.20 / Rs.7,500 = 0.0027 (0.27%)
If the bond fund offers a higher rate than 0.27%, you should make the shift. As the nominal interest rate rises, people reduce their checking account balances, allowing us to predict that velocity will change with the interest rate. The higher the nominal interest rate, the less money individuals will hold for a given level of transactions, and the higher the velocity of money.
The transactions demand for money is also affected by technology and financial innovation, which allow people to limit the amount of money they hold. The lower the cost of shifting money between accounts, the lower the money holdings and the higher the velocity.
π Example (Automatic transfer account): Suppose your bank offers free automatic transfer. With take-home pay of Rs.30,000, each time you make a purchase, the bank automatically shifts the purchase amount from your bond fund to your checking account. Spending Rs.30,000 in 30 days, your average money holding will be Rs.1,000βfar below the Rs.15,000 you would hold if you simply left the money in checking. So the lower the cost of shifting funds, the lower your money holdings and the higher the velocity.
An increase in the liquidity of stocks, bonds, or any other asset reduces the transactions demand for money. People also hold money to ensure against unexpected expenses; this is the precautionary demand for money and can be included with the transactions demand. The higher the level of uncertainty about the future, the higher the demand for money and the lower the velocity of money.
The Portfolio Demand for Money
Money is just one of many financial instruments that we can hold in our investment portfolios. Expectations that interest rates will change in the future are related to the expected return on a bond and also affect the demand for money.
β Key Takeaways
The velocity of money is stable in the long run but shows significant short-run fluctuations that complicate monetary policy, making it difficult to use money growth targets for inflation stabilization. The equation of exchange (Money Growth + Velocity Growth = Inflation + Real Growth) shows that policymakers must account for velocity changes when setting money growth targets. The transactions demand for money depends on nominal income, the interest rate (the opportunity cost of holding money), and technology that affects switching costs. The precautionary demand for money increases with uncertainty, reducing velocity. Understanding the demand for money is essential for predicting changes in velocity and conducting effective monetary policy.
π§ Quick Revision Questions
- What is the equation of exchange, and how does it relate money growth, velocity, inflation, and real growth?
- If the inflation target is 2%, real growth is 3.5%, and velocity is expected to fall by 3%, what should the money growth rate be?
- In the cash management example with Rs.30,000 monthly income, what is the break-even monthly interest rate for switching half the funds to a bond fund with a Rs.20 service charge?
- How does financial innovation, such as automatic transfer accounts, affect the transactions demand for money and velocity?
- What is the precautionary demand for money, and how does uncertainty about the future affect velocity?
π Lecture 39 β The Portfolio Demand for Money
π Overview: This lecture examines money as a financial asset within investment portfolios and explores the determinants of money demand, including both transactions and portfolio motives. It also connects money growth to inflation in both high and low-inflation environments, explaining how central banks use money growth targets to influence long-run inflation and aggregate demand.
ποΈ Topics Covered
The lecture covers the portfolio demand for money and its determinants including wealth, return relative to alternatives, expected future interest rates, risk, and liquidity. It then discusses targeting money growth in a low-inflation environment, output and inflation in the long run (potential output and long-run inflation), and finally the relationship between money growth, inflation, and aggregate demand through the equation of exchange.
π Lecture Summary
The Portfolio Demand for Money
Money is just one of many financial instruments that can be held in investment portfolios. Expectations that interest rates will change in the future are related to the expected return on a bond and also affect the demand for money. When interest rates are expected to rise, money demand goes up as people switch from holding bonds into holding money. The demand for money will also be affected by changes in the riskiness of other assets; as their risk increases so does the demand for money. Money demand will increase if other assets become less liquid.
π‘ Why this matters: Understanding portfolio demand helps explain why people choose to hold money even when other assets offer higher returns β it's about managing risk and liquidity.
Determinants of Money Demand: Factors that cause individuals to hold more money
Transactions Demand for Money
National Income β The higher nominal income, the higher the demand for money. Interest rates β The lower interest rates, the higher the demand for money. Availability of alternative means of payment β The less available alternative means of payment, the higher the demand for money.
π Definition β Transactions Demand for Money: The demand for money as a medium of exchange to facilitate everyday purchases and payments.
Portfolio Demand for Money
Wealth β As wealth rises, the demand for money goes up. Return relative to alternatives β As the return on alternatives falls, the demand for money goes up. Expected future interest rates β As expected future interest rates rise, the demand for money goes up. Risk relative to alternatives β As the riskiness of alternatives rises, the demand for money goes up. Liquidity relative to alternatives β As the liquidity of alternatives falls, the demand for money goes up.
π Definition β Portfolio Demand for Money: The demand for money as a store of value within an investment portfolio, influenced by wealth, returns, risk, liquidity, and interest rate expectations.
π Example: If an investor expects interest rates to rise significantly next month, bond prices will fall. The expected return on bonds becomes negative. The investor sells bonds now and holds money instead, increasing money demand.
Targeting Money Growth in a Low-Inflation Environment
In the long run, inflation is tied to money growth. In a high-inflation environment, moderate variations in the growth of velocity are a mere annoyance. The only solution to inflation in a high inflation environment is to reduce money growth. In a low-inflation environment, the ability to use money growth as a policy guide depends on the stability of the velocity of money.
Two criteria for the use of money growth as a direct monetary policy target:
- A stable link between the monetary base and the quantity of money
- A predictable relationship between the quantity of money and inflation
These allow policymakers to predict the impact of changes in the central bankβs balance sheet on the quantity of money and translate changes in money growth into changes in inflation.
π Definition β Velocity of Money: The rate at which money circulates through the economy, measuring how many times a unit of money is used to purchase goods and services in a given period.
π‘ Why this matters: In low-inflation environments, small changes in velocity can obscure the relationship between money growth and inflation, making monetary policy targeting more difficult.
Output and Inflation in the Long Run
Potential Output
Potential output is what the economy is capable of producing when its resources are used at normal rates. Potential output is not a fixed level, because the amount of labor and capital in an economy can grow, and improved technology can increase the efficiency of the production process. Unexpected events can push current output away from potential output, creating an output gap. In the long run, current output equals potential output.
π Definition β Output Gap: The difference between actual current output and potential output; a positive gap indicates an economy operating above normal capacity, and a negative gap indicates underutilized resources.
Long-Run Inflation
In the long run, since current output equals potential output, real growth must equal growth in potential output. Ignoring changes in velocity, in the long run, inflation equals money growth minus growth in potential output.
Though central banks focus on controlling short term nominal interest rates, they keep an eye on money growth. When they try to adjust the level of reserves in the banking system to maintain the interest rate, it affects money growth, which in turn determines inflation.
π Formula: Inflation = Money Growth β Growth in Potential Output β The faster money supply grows relative to the economy's productive capacity, the higher inflation will be.
Money Growth, Inflation, and Aggregate Demand
Aggregate demand tells us how spending (demand) by households, firms, the government, and foreigners changes as inflation goes up and down. The level of aggregate demand is tied to monetary policy through the equation of exchange (MV=PY) because the amount of money in the economy limits the ability to make payments.
Rearranging the equation of exchange:
π Formula: P = MV / Y_ad (or Y_ad = MV / P)
Where:
- Y_ad = aggregate demand
- M = the quantity of money
- V = the velocity of money
- P = the price level
From this expression it is clear that an increase in the price level reduces the purchasing power of money, which means fewer purchases are made, pushing down aggregate demand.
π Definition β Aggregate Demand: The total spending on goods and services in an economy by households, firms, the government, and foreigners at various price levels.
π Example: If the money supply (M) is $100 billion, velocity (V) is 5 (each dollar is spent 5 times per year), and the price level (P) is 1.25, then aggregate demand Y_ad = ($100 billion Γ 5) / 1.25 = $400 billion. If the price level rises to 1.50 while M and V remain unchanged, aggregate demand falls to ($100 billion Γ 5) / 1.50 = $333.3 billion.
π‘ Why this matters: This inverse relationship between price level and aggregate demand explains why high inflation can reduce real economic activity by eroding purchasing power.
β Key Takeaways
The portfolio demand for money is influenced by wealth, expected future interest rates, the return on alternative assets, their risk, and their liquidity β when alternative assets become riskier or less liquid, money demand increases. In low-inflation environments, using money growth as a policy target requires both a stable link between the monetary base and the money supply and a predictable relationship between money growth and inflation. In the long run, current output equals potential output, and inflation is determined by the difference between money growth and potential output growth. Through the equation of exchange (MV=PY), an increase in the price level reduces the purchasing power of money, decreasing aggregate demand. Central banks must carefully balance interest rate targets with money growth because the latter ultimately determines long-run inflation.
π§ Quick Revision Questions
- What happens to money demand when expected future interest rates rise, and why?
- List the five determinants of portfolio demand for money and explain how each affects money demand.
- In the long run, what is the relationship between money growth, potential output growth, and inflation?
- What two criteria must be satisfied for money growth to serve as a direct monetary policy target in a low-inflation environment?
- Using the equation of exchange, explain why an increase in the price level reduces aggregate demand when money supply and velocity are held constant.
π Lecture 40 β Money Growth, Inflation, and Aggregate Demand
π Overview: This lecture explains how inflation and money growth interact to shape aggregate demand, and how central banks influence the real economy through the real interest rate. Understanding these relationships is critical for grasping how monetary policy affects output, prices, and economic stability.
ποΈ Topics Covered
The lecture covers the downward-sloping aggregate demand curve due to real money balance effects; monetary policy's influence on the real interest rate; the four components of aggregate demand and their sensitivity to interest rates; the long-run real interest rate that equilibrates aggregate demand with potential output; and the monetary policy reaction curve linking inflation to interest rate targets.
π Lecture Summary
Money Growth, Inflation, and Aggregate Demand
To shift focus to inflation, we examine changes in the price level. If inflation exceeds money growth (with velocity held constant), real money balances fall, causing aggregate demand to decrease. Because real money balances fall at higher levels of inflation, resulting in a lower level of aggregate demand, the aggregate demand curve is downward sloping. Changes in the interest rate also provide a mechanism for aggregate demand to slope downward.
π‘ Why this matters: This inverse relationship between inflation and aggregate demand is fundamental to understanding how price stability affects economic activity.
Monetary Policy and the Real Interest Rate
Central bankers control short-term nominal interest rates by controlling the market for reserves. However, the economic decisions of households and firms depend on the real interest rate. To alter the course of the economy, central banks must influence the real interest rate as well. In the short run, because inflation is slow to respond, when monetary policymakers change the nominal interest rate, they change the real interest rate. The real interest rate, then, is the lever through which monetary policymakers influence the real economy. In changing real interest rates, they influence aggregate demand.
π Definition β Real Interest Rate: The nominal interest rate adjusted for inflation; the true cost of borrowing or return on saving. π Formula: Real Interest Rate β Nominal Interest Rate β Inflation Rate β The real rate reflects actual purchasing power changes.
Aggregate Demand and the Real Interest Rate
Aggregate demand is divided into four components: Consumption (C), Investment (I), Government purchases (G), and Net exports (NX). The aggregate demand equation is: Yad = C + I + G + NX. It is helpful to think of aggregate demand as having two parts: one that is sensitive to real interest rate changes and one that is not. Investment is the most important of the components sensitive to changes in the real interest rate. An investment can be profitable only if its internal rate of return exceeds the cost of borrowing.
π Definition β Aggregate Demand Curve: A curve showing the relationship between the price level (or inflation) and the quantity of output demanded; it slopes downward because higher inflation reduces real money balances and thus demand.
Impact of a Rise in the Real Interest Rate on Components of Aggregate Demand
Consumption and net exports also respond to the real interest rate. Consumption decisions often rely on borrowing, and the alternative to consumption is saving (higher rates mean more saving). As for net exports, when the real interest rate in a country rises, her financial assets become attractive to foreigners, causing local currency to appreciate, which in turn means more imports and fewer exports (lower net exports). While changes in the real interest rate may have an impact on the government's budget by raising the cost of borrowing, the effect is likely to be small and ignorable. Thus, considering consumption, investment, and net exports, an increase in the real interest rate reduces aggregate demand (the effect on government spending is small enough to be ignored).
π Example: When the real interest rate rises:
- Consumption (C): Reward to saving rises β Consumption falls
- Investment (I): Cost of financing rises β Investment falls
- Net Exports (NX): Demand for domestic assets rises, causing currency appreciation, raising export prices and reducing import costs β Exports fall; imports rise; net exports fall
- Aggregate Demand (Yad): C, I, and NX all fall β Aggregate demand falls
The Long-Run Real Interest Rate
There must be some level of the real interest rate at which aggregate demand equals potential output; this is the long-run real interest rate. The long-run real interest rate equates aggregate demand with potential output. The rate will change if a component of aggregate demand that is not sensitive to the real interest rate goes up (or down) or if potential output changes. For example, an increase in government purchases (all else held constant) will raise aggregate demand at every level of the real interest rate. To remain in equilibrium, one of the interest-sensitive components of aggregate demand must fall, and for that to happen, the long-run real interest rate must rise. The same would be true for increases in other components of aggregate demand that are not interest sensitive. A change in potential output has an inverse effect on the long-run real interest rate; when potential output rises, aggregate demand must rise with it, which requires a decrease in the real interest rate.
π Definition β Long-Run Real Interest Rate: The real interest rate at which aggregate demand exactly equals potential output, ensuring macroeconomic equilibrium.
Inflation, the Real Interest Rate, and the Monetary Policy Reaction Curve
Policymakers set their short-run nominal interest rate targets in response to economic conditions in general and inflation in particular. When current inflation is high or current output is running above potential output, central bankers will raise nominal interest rates; when current inflation is low or current output is well below potential, they will lower interest rates. While they state their policies in terms of nominal rates, they do so knowing that changes in the nominal interest rate will eventually translate into changes in the real interest rate, and it is those changes that influence the economic decisions of firms and households. Experts agree that any (coherent) monetary policy can be written as an inflation target plus a response to supply shocks.
π Definition β Monetary Policy Reaction Curve: A rule or pattern describing how a central bank adjusts its nominal interest rate target in response to changes in inflation and output relative to potential.
π Example: If inflation rises above target, the central bank raises the nominal interest rate. Since inflation is slow to adjust in the short run, the real interest rate also rises, reducing investment and consumption, which lowers aggregate demand and eventually brings inflation back down.
β Key Takeaways
The aggregate demand curve slopes downward because higher inflation reduces real money balances, lowering demand. Central banks influence the economy by changing the real interest rate, which affects consumption, investment, and net exports. The long-run real interest rate is the level that equates aggregate demand with potential output, and it changes when non-interest-sensitive components shift or potential output changes. Monetary policy can be summarized by a reaction curve where central banks raise nominal rates when inflation or output is above target. Understanding these linkages is essential for analyzing how monetary policy transmits to the real economy.
π§ Quick Revision Questions
- Why does the aggregate demand curve slope downward in the money growth/inflation framework?
- How do central banks influence the real interest rate given that they control only nominal rates?
- What are the four components of aggregate demand, and which three are sensitive to the real interest rate?
- What is the long-run real interest rate, and what happens to it if government purchases increase?
- What does the monetary policy reaction curve describe, and how does it relate to inflation targeting?