๐ Lecture 29 โ The Government Safety Net
๐ Overview: This lecture examines why and how governments intervene in financial systems to protect investors, prevent monopolistic exploitation, and ensure stability. It focuses on depository institutions, the lender of last resort function, the moral hazard problems created by safety nets, and the regulatory and supervisory mechanisms used to contain those risks.
๐๏ธ Topics Covered
The lecture covers three reasons for government involvement in the financial system: investor protection, protection from monopolistic exploitation, and stability of the financial system. It then discusses the unique role of depository institutions, the government as lender of last resort, problems created by the government safety net including moral hazard and too-big-to-fail, regulation and supervision of the financial system, asset holding restrictions and minimum capital requirements, and the supervision and examination process using the CAMELS framework.
๐ Lecture Summary
The Government Safety Net
There are three reasons for the government to get involved in the financial system: to protect investors, to protect bank customers from monopolistic exploitation, and to ensure the stability of the financial system.
Investor Protection โ Small investors are unable to judge the soundness of financial institutions. In practice, only the force of law ensures the bank's integrity, thus investors rely on government to protect them from mismanagement and malfeasance.
Protection from monopolistic exploitation โ Monopolists exploit their customers by raising prices to earn unwarranted profits. Government intervenes to prevent firms in an industry from becoming too large. The same may apply to banks as well.
Stability of financial system โ Liquidity risk and information asymmetry indicate the instability of the financial system. Financial institutions can create and destroy the value of their assets in a very short period, and a single firm's failure can bring down the whole system. Government officials employ a combination of strategies to protect investors and ensure the stability of the financial system: they provide the safety net to insure small depositors, and they operate as the lender of last resort.
The Unique Role of Depository Institutions
Depository institutions receive a disproportionate amount of attention from government regulators because they play a central role in the economy and they face a unique set of problems. We all rely heavily on banks for access to the payments system. Banks are also prone to runs, as they hold illiquid assets to back their liquid liabilities, promising full and constant value to the depositors based on assets of uncertain value. They are linked to each other both on their balance sheets and in their customers' minds; this interconnectedness of banks is almost unique to the financial industry.
The Government as Lender of Last Resort
The best way to stop a bank failure from turning into a panic is to make sure solvent institutions can meet their depositors' withdrawal demands. The existence of a lender of last resort significantly reduces, but does not eliminate, contagion. For the system to work, central bank officials who approve the loan applications must be able to distinguish an illiquid from an insolvent institution. It is important for a lender of last resort to operate in a manner that minimizes the tendency for bankers to take too much risk in their operations.
Problems Created by the Government Safety Net
Protected depositors have no incentive to monitor their banks' behavior, and knowing this, banks take on more risk than they would normally. In protecting depositors the government creates moral hazard. Some banks are too big to fail, meaning that their failure would cause havoc in the financial system. The managers of such institutions know that if they begin to founder the government will have to bail them out. The too-big-to-fail policy limits the extent of the market discipline that depositors can impose on banks and compounds the moral hazard problem.
Regulation and Supervision of the Financial System
Government officials employ three strategies to ensure that the risks created by the safety net are contained: Regulation establishes rules for bank managers to follow, Supervision provides general oversight of financial institutions, and Examination provides detailed information on the firms' operations. Regulatory requirements are designed to minimize the cost of failures to the tax-paying public. One example of regulation is the requirement that banks obtain a charter in order to operate; this provides screening to make sure that the people who own and run banks will not be criminals. Once a bank is operating, other regulations control the assets, the amount of capital, and makes information about the bank's balance sheet public. Government supervisors enforce the regulations; they monitor, inspect, and examine banks to make sure that their business practices conform to regulatory requirements. The State Bank of Pakistan (SBP) is the supreme regulatory authority for the banking sector in Pakistan (www.sbp.org.pk).
Asset Holding Restrictions and Minimum Capital Requirements
The simplest way to prevent bankers from exploiting their safety net is to restrict banks' balance sheets. This can be through restrictions on the kinds of assets banks can hold and requirements that they maintain minimum levels of capital. The size of the loans a bank can make to particular borrowers is also limited. Minimum capital requirements complement these limitations on bank assets. Capital serves as a cushion against declines in the value of the bank's assets, lowering the likelihood of the bank's failure, and is a way to reduce the problem of moral hazard. Capital requirements take two basic forms: The first requires banks to keep their ratio of capital to assets above some minimum level regardless of the structure of their balance sheets; the second requires banks to hold capital in proportion to the riskiness of their operations. Banks must provide information to the financial markets about their balance sheets.
Supervision and Examination
The government enforces banking rules and regulations through an elaborate oversight process called supervision, which relies on a combination of monitoring and inspection. Supervision is done remotely, through an examination of the detailed reports banks must submit, as well as through on-site examination. At the largest institutions, examiners are on site all the time; this is called continuous examination. The most important part of a bank examination is the evaluation of past-due loans, to see if they should be declared in default. Supervisors use the acronym CAMELS to describe the criteria used to evaluate the health of the bank: Capital adequacy, Asset quality, Management, Earnings, Liquidity, Sensitivity to risk. Current practice is for examiners to act as consultants to banks, advising them on how to get the highest return possible while keeping risk at an acceptable level that ensures the bank will stay in business.
๐ก Why this matters: The CAMELS rating system is the standard framework used by regulators worldwide to assess bank health, and understanding it is critical for grasping how bank examinations work in practice.
โญ Key Takeaways
The government provides a safety net to protect investors and ensure financial stability, but this creates moral hazard because protected depositors have no incentive to monitor banks, leading banks to take excessive risks. The "too-big-to-fail" policy compounds this problem by removing market discipline. To contain these risks, regulators use three strategies: regulation (setting rules), supervision (general oversight), and examination (detailed inspection). Key regulatory tools include asset restrictions, minimum capital requirements (both as a simple ratio and risk-based), and chartering. Bank health is evaluated using the CAMELS framework (Capital adequacy, Asset quality, Management, Earnings, Liquidity, Sensitivity to risk), and examiners now act as consultants to help banks manage risk while staying profitable.
๐ง Quick Revision Questions
- What are the three reasons for government involvement in the financial system, and what specific strategies do officials use to ensure stability?
- Why do depository institutions receive disproportionate regulatory attention compared to other financial firms?
- What is moral hazard in the context of the government safety net, and how does the "too-big-to-fail" policy worsen it?
- What are the two basic forms of minimum capital requirements, and how does capital reduce moral hazard?
- What does the acronym CAMELS stand for, and why is the evaluation of past-due loans the most important part of a bank examination?
๐ Lecture 30 โ The Government's Bank
๐ Overview: This lecture explores the role and functions of central banks, beginning with their historical origins as the government's bank. It explains why central banks are critical for economic stability, detailing their unique position in controlling currency, conducting monetary policy, and serving as the bankers' bank to ensure a stable financial system.
๐๏ธ Topics Covered
The lecture covers the central bank's origins as the government's bank and its monopoly on currency issuance, its role as the bankers' bank including lender of last resort functions and payments system management, and the primary objective of all central banks: stability. It specifically examines five objectives for stability, with a deep focus on low, stable inflation, including the rationale for price stability and the risks of both zero inflation and deflation.
๐ Lecture Summary
The Government's Bank
The central bank started out as the governmentโs bank, originally created by rulers to finance wars. However, the early examples are really the exceptions, as central banking is largely a 20th century phenomenon. The central bank occupies a privileged position: it has a monopoly on the issuance of currency. The central bank creates money and thereby controls the availability of money and credit in a countryโs economy. Most central banks go about this by adjusting short-term interest rates, an activity called monetary policy.
In todayโs world, central banks use monetary policy to stabilize economic growth and inflation. An expansionary or accommodative policy (lower interest rates) raises growth and inflation; tighter or restrictive policy reduces them. Governments want to control the printing of money because it is a very profitable business; also, losing control of the amount of currency means losing control of inflation.
๐ก Why this matters: The central bank's control over currency and interest rates gives it the power to influence the entire economy, making its decisions crucial for growth and price stability.
The Bankers' Bank
The most important day-to-day jobs of the central bank are to: provide loans during times of financial stress (the lender of last resort), manage the payments system (settles interbank payments), and oversee commercial banks and the financial system (handles the sensitive information about institutions without conflicts of interest). By ensuring that sound banks and financial intermediaries can continue to operate, the central bank makes the whole financial system more stable.
Central banks are the biggest and most powerful players in a countryโs financial and economic system and are supposed to use this power to stabilize the economy, making us all better off. However, central banks that are under extreme political pressure, or that are simply incompetent, can wreak havoc on the economic and financial systems. A central bank does not control securities markets or the governmentโs budget. The common arrangement today is for the central bank to serve the government in the same way that a commercial bank serves a business or an individual.
๐ Definition โ Lender of last resort: The central bank's role in providing loans to sound banks during times of financial stress to prevent system-wide collapse. ๐ Definition โ Payments system: The system for settling interbank payments, which is managed by the central bank to ensure smooth financial transactions.
Stability: The Primary Objective of All Central Banks
When economic and financial systems are left on their own they are prone to episodes of extreme volatility; central bankers work to reduce that volatility. Central bankers pursue five specific objectives: low and stable inflation, high and stable real growth together with high employment, stable financial markets, stable interest rates, and a stable exchange rate. Instability in any of those would pose an economy-wide economic risk that diversification could not mitigate. Thus the job of the central bank is to improve general economic welfare by managing and reducing systematic risk. It is probably impossible to achieve all five of these objectives simultaneously, and so tradeoffs must be made.
๐ Definition โ Systematic risk: Economy-wide risk that cannot be mitigated by diversification, which central banks aim to manage and reduce through their stability objectives.
Low, Stable Inflation
Many central banks take as their primary job the maintenance of price stability; they strive to eliminate inflation. The rationale for keeping the economy inflation-free is that moneyโs usefulness as a unit of account and as a store of value is enhanced when its purchasing power is maintained. Inflation degrades the information content of prices and impedes the marketโs function of allocating resources to their best uses. The higher the inflation is, the less predictable it is, and the more systematic risk it creates. Also, high inflation is bad for growth.
While there is agreement that low inflation should be the primary objective of monetary policy, there is no agreement on how low inflation should be. Zero inflation is too low, because it brings the risk of deflation (a drop in prices) which in turn results in increased defaults on loans and a threat to the health of banks. Furthermore, if inflation were zero, an employer wishing to cut labor costs would need to cut nominal wages, which is difficult to do. A small amount of inflation may actually make labor markets work better, at least from the employerโs point of view.
๐ Definition โ Deflation: A drop in prices that creates risks such as increased defaults on loans and threats to bank health. ๐ก Why this matters: Central banks must carefully balance the goal of low inflation against the risks of deflation and the difficulty of adjusting nominal wages in a zero-inflation environment.
โญ Key Takeaways
The central bank is the government's bank with a monopoly on currency issuance, using monetary policy (adjusting short-term interest rates) to stabilize growth and inflation. As the bankers' bank, it acts as lender of last resort, manages the payments system, and oversees financial institutions to ensure stability. The primary objective of all central banks is stability, pursued through five goals: low stable inflation, high stable growth and employment, stable financial markets, stable interest rates, and a stable exchange rate. While low stable inflation is often the primary goal, zero inflation is too risky because it can cause deflation and make labor market adjustments difficult. Central banks must make tradeoffs among these objectives since achieving all five simultaneously is likely impossible.
๐ง Quick Revision Questions
- What is the historical origin of central banks, and what privileged position do they occupy today?
- List the three most important day-to-day jobs of the central bank as the bankers' bank.
- What are the five specific stability objectives pursued by central bankers?
- Why is zero inflation considered too low, and what risks does it introduce?
- How does inflation affect money's usefulness as a unit of account and store of value?
๐ Lecture 31 โ Low, Stable Inflation
๐ Overview: This lecture examines the primary objectives of modern central banks, with a particular focus on maintaining price stability. It explains why low, stable inflation is preferred over zero inflation, explores other key goals like stable growth, financial system stability, and interest/exchange rate stability, and concludes by outlining the necessary design features of a successful central bank.
๐๏ธ Topics Covered
The lecture covers the rationale for central banks pursuing low, stable inflation, the dangers of deflation and zero inflation, the objective of high and stable real growth, financial system stability, interest rate and exchange rate stability, and the key institutional characteristics needed to create a successful central bank: independence, accountability, transparency, and clear communication.
๐ Lecture Summary
Low, Stable Inflation
Many central banks take price stability as their primary job, striving to eliminate inflation. The rationale is that moneyโs usefulness as a unit of account and as a store of value is enhanced when its purchasing power is maintained. Inflation degrades the information content of prices and impedes the marketโs function of allocating resources to their best uses. The higher the inflation is, the less predictable it is, and the more systematic risk it creates. Also, high inflation is bad for growth. While there is agreement that low inflation should be the primary objective, there is no agreement on how low inflation should be. Zero inflation is considered too low because it brings the risk of deflation (a drop in prices), which results in increased defaults on loans and a threat to the health of banks. Furthermore, if inflation were zero, an employer wishing to cut labor costs would need to cut nominal wages, which is difficult to do. A small amount of inflation may actually make labor markets work better, at least from the employerโs point of view.
๐ก Why this matters: This section explains the central trade-off: while inflation is harmful, targeting zero inflation is dangerous, and a small, stable amount of inflation is actually beneficial for the economy and labor markets.
๐ Definition โ Deflation: A drop in prices, which results in increased defaults on loans and a threat to the health of banks.
High, Stable Real Growth
Central bankers work to dampen the fluctuations of the business cycle; booms are popular but recessions are not. They moderate these cycles and stabilize growth and employment by adjusting interest rates. Monetary policymakers can moderate recessions by lowering interest rates and can moderate booms by raising them (to keep growth at a sustainable level). Along with growth and employment, stability is also important because fluctuations in general business conditions are the primary source of systematic risk.
๐ Formula: Lower interest rates โ moderate recessions; Higher interest rates โ moderate booms.
Financial System Stability
Financial system stability is an integral part of every modern central bankerโs job. The possibility of a severe disruption in the financial markets is a type of systematic risk that central banks must control.
Interest Rate and Exchange Rate Stability
Interest rate stability and exchange rate stability are a means for achieving the ultimate goal of stabilizing the economy; they are not ends unto themselves. Interest rate volatility is a problem because it makes output unstable as borrowing and expenditure fluctuate with changing rates, and it means higher risk, a higher risk premium, and makes financial decisions more difficult. Even though the exchange rate affects the prices of imports and exports, stabilizing exchange rates is the last item on the list of central bank objectives. Different countries have different priorities; stable exchange rates are more important in developing countries because imports and exports are central to their economies.
๐ก Why this matters: This ordering explains why central banks prioritize interest rate stability over exchange rate stability, though the priority varies by country.
The objectives of a Modern Central Bank (Table Summary)
- Low Stable Inflation: Inflation creates confusion and makes planning difficult. When inflation is high, growth is low.
- High Stable growth: Stable predictable growth is higher than unstable, unpredictable growth.
- Financial System Stability: A stable financial system is a necessity for an economy to operate efficiently.
- Stable Interest Rates: Interest rate volatility creates risk for both lenders and borrowers.
- Stable Exchange Rates: Variable exchange rates make the revenues from foreign sales and the cost of purchasing imported goods hard to predict.
Meeting the Challenge: Creating a Successful Central Bank
The boom in the past decade with its associated decrease in volatility may have happened because technology sparked a boom just as central banks became better at their jobs. Policymakers realized that sustainable growth had gone up, so interest rates could be kept low without worrying about inflation, and central banks were redesigned. Today there is a clear consensus about the best way to design a central bank and what to tell policymakers to do. A central bank must be:
- Independent of political pressure,
- Accountable to the public,
- Transparent in its policy actions,
- Clear in its communications with financial markets and the public.
โญ Key Takeaways
A modern central bankโs primary objective is low, stable inflation, but zero inflation is too risky because it can lead to deflation, loan defaults, and difficulty cutting nominal wages. The other key objectives are high, stable real growth, financial system stability, stable interest rates, and stable exchange rates, with exchange rate stability being the lowest priority, especially in developed economies. To be successful, a central bank must be independent, accountable, transparent, and clear in its communications. Understanding this hierarchy of goals and the design features of a central bank is critical for analyzing how monetary policy is conducted in practice.
๐ง Quick Revision Questions
- Why is zero inflation considered too low for a central bankโs target?
- What is the difference between a central bankโs ultimate goals and its intermediate targets (like interest rate stability)?
- Why is financial system stability considered a systematic risk that central banks must control?
- For which type of country is exchange rate stability more important, and why?
- What are the four key design features of a successful central bank?
๐ Lecture 32 โ Meeting the Challenge: Creating a Successful Central Bank
๐ Overview: This lecture outlines the modern consensus on how to design a successful central bank, emphasizing independence, accountability, transparency, and decision-making by committee. It also examines how central banks interact with fiscal policy and reviews the central bank's balance sheet, showing how assets and liabilities enable monetary control.
๐๏ธ Topics Covered
This lecture covers the need for central bank independence from political pressure, the benefits of decision-making by committee, the requirements for accountability and transparency, and the importance of a clear policy framework. It also discusses the relationship between central banks and fiscal policy, the inherent conflicts between them, and provides a detailed breakdown of the central bank's balance sheetโits assets (securities, foreign exchange reserves, loans) and liabilities (currency, government accounts, commercial bank reserves).
๐ Lecture Summary
The need for independence
The idea that central banks should be free from political pressure is relatively new, as they originally functioned as the government's bank. Independence has two key components: monetary policymakers must control their own budgets, and the bank's policies must not be reversible by outside parties. Successful monetary policy requires a long time horizon, which conflicts with politicians' focus on short-term goals. Politicians often favor accommodative policies (low interest rates, high money growth) to boost output and employment now, even if it causes inflation later. To insulate policymakers, governments give central banks budget control, irreversible decision-making authority, and long-term appointments.
๐ Definition โ Central Bank Independence: A central bank operating free from political pressure, with control over its own budget and policies that cannot be reversed by external political actors.
Decision-Making by Committee
For normal operations, relying on a committee rather than an individual is superior. This pools knowledge, experience, and opinions, reducing the risk that policy reflects one person's quirks. In a democracy, vesting so much power in one individual also poses a legitimacy problem.
๐ก Why this matters: Committee decisions reduce policy volatility and idiosyncratic errors, enhancing the credibility and stability of monetary policy.
The Need for Accountability and Transparency
Central bank independence creates a tension with representative democracy. To resolve this, politicians establish explicit goals and require policymakers to report progress. Explicit goals foster accountability; disclosure requirements create transparency. The means vary across countriesโsome set numerical inflation targets, others let the central bank define them. Today, it is understood that secrecy damages both policymakers and the economy; policymakers must be clear about what they aim to achieve and how.
๐ Definition โ Accountability: The requirement that central bankers be held responsible to the public and their elected representatives for achieving stated goals. ๐ Definition โ Transparency: The practice of openly communicating the central bank's objectives, methods, and decisions to financial markets and the public.
The Policy Framework, Policy Trade-offs, and Credibility
The monetary policy framework comprises the central bank's objectives and the requirements for independence, accountability, and communication. This framework resolves ambiguities and clarifies responses when goals conflictโsuch as the daily tradeoff between inflation and growth. Central bankers must make their priorities clear, and a well-designed framework helps establish credibility.
๐ Definition โ Credibility: The degree to which the public and financial markets believe that the central bank will follow through on its stated policy intentions.
The Principles of Central Bank Design
This section summarizes the core design principles in a table format:
| Principle | Description |
|---|---|
| Independence | To keep inflation low, monetary decisions must be made free of political influence. |
| Decision making by committee | Pooling the knowledge of a number of people yields better decisions than decision making by an individual. |
| Accountability and transparency | Policy makers must be held accountable to the public they serve and clearly communicate their objectives, decisions and methods. |
| Policy framework | Politicians must clearly state their policy goals and the tradeoffs among them. |
Figure: Inflation and Central Bank Independence 1973-1988 shows a clear negative relationship: countries with higher central bank independence (e.g., Germany, Switzerland) had lower average inflation, while those with lower independence (e.g., Spain, Italy, New Zealand) had higher inflation.
Fitting Everything Together: Central Banks and Fiscal Policy
The central bank does not control the government's budget; fiscal policy (taxes and spending) is set by elected officials. While both share the ultimate goal of improving well-being, conflicts arise. Funding needs create a natural conflict: politicians often borrow rather than raise taxes, but debt capacity is limited. Inflation becomes a temptation for shortsighted fiscal policymakers because it lets them gain money and effectively default on a portion of the debt. Therefore, responsible fiscal policy is essential for successful monetary policy.
The Central Bankโs Balance Sheet
Central banks publish their balance sheets regularly as part of transparency. The balance sheet has three major assets and three major liabilities.
Assets:
- Securities (Treasury securities) are the primary assets of most central banks; independent central banks determine how many securities they purchase.
- Foreign exchange reserves are foreign-currency bonds used for foreign exchange market interventions.
- Loans to commercial banks, which include discount loans (short-term cash for banks) and float (created when the central bank credits a receiving bank's account before debiting the paying bank's account during check clearing). Through its Treasury securities holdings, the central bank controls the discount rate and the availability of money and credit. Gold reserves are now virtually irrelevant.
Liabilities:
- Currency (cash) accounts for over 90% of central bank liabilities; central banks have a monopoly on currency issuance.
- Governmentโs account is where the government deposits tax revenues and from which it writes checks.
- Reserves (commercial bank deposits) consist of cash in bank vaults and deposits at the central bank, functioning like a checking account. Central banks run monetary policy operations through changes in these reserves.
๐ Definition โ Discount loans: Loans the central bank makes to commercial banks that need short-term cash. ๐ Definition โ Reserves: Commercial bank assets consisting of vault cash and deposits at the central bank; the primary tool for central bank monetary policy operations.
โญ Key Takeaways
The most critical lesson is that for a central bank to maintain low inflation, it must be independent from political pressure while simultaneously being accountable and transparent to the public. Committee-based decision-making reduces risk and enhances legitimacy. A clear monetary policy framework is essential to resolve conflicts between inflation and growth and to build credibility. Finally, fiscal policy and monetary policy are tightly linkedโirresponsible fiscal behavior (excessive borrowing, using inflation to default) undermines monetary policy, and the central bank's balance sheet (especially securities holdings and reserves) is the operational tool through which it implements its policies.
๐ง Quick Revision Questions
- What are the two components of central bank independence, and why is a long time horizon important?
- Why is decision-making by committee preferred over decision-making by an individual for a central bank?
- How does a central bank resolve the conflict between its independence and the principles of representative democracy?
- What is the "monetary policy framework," and how does it help central bankers manage trade-offs between inflation and growth?
- What are the three main assets and three main liabilities on a central bank's balance sheet, and which liability accounts for over 90% of the total?
๐ Lecture 33 โ The Monetary Base
๐ Overview: This lecture defines the monetary base (high-powered money) and explains how central bank transactions affect its size and composition. Understanding these mechanisms is crucial for grasping how central banks control the money supply through their balance sheet operations.
๐๏ธ Topics Covered
The lecture covers the two components of the monetary base (currency in circulation and bank reserves), and examines four specific transactions that affect central bank and banking system balance sheets: open market operations, foreign exchange interventions, discount loans, and cash withdrawals. For each transaction, the impact on asset-liability composition and the monetary base is detailed.
๐ Lecture Summary
The Monetary Base
Currency in the hands of the public and the reserves of the banking system are the two components of the monetary base, also called high-powered money. Bank Reserves = Vault Cash plus Deposits at the central bank. The central bank can control the size of the monetary base and therefore the quantity of money.
Changing the Size and Composition of the Balance Sheet
The central bank controls the size of its balance sheet. Policymakers can enlarge or reduce their assets and liabilities at will. The central bank can buy things, like a bond, and create liabilities to pay for them. It can increase the size of its balance sheet as much as it wants.
There are four specific types of transactions which can affect the balance sheets of both the central bank and the banking system:
- An open market operation, in which the central bank buys or sells a security;
- A foreign exchange intervention, in which the central bank buys or sells foreign currency reserves;
- The central bank's extension of a discount loan to a commercial bank;
- The decision by an individual to withdraw cash from a bank.
Open market operations, foreign exchange interventions, and discount loans all affect the size of the central bank's balance sheet. They change the size of the monetary base. Cash withdrawals by the public create shifts among the different components of the monetary base, changing the composition of the central bank's balance sheet but leaving its size unaffected.
One simple rule helps in understanding the impact of each of these four transactions on the central bank's balance sheet: When the value of an asset on the balance sheet increases, either the value of another asset decreases (so that the net change is zero) or the value of a liability rises by the same amount (and similarly for an increase in liabilities).
Open Market Operations
OMO (Open Market Operation) is when the central bank buys or sells securities in financial markets. These purchases and sales have a straightforward impact on the central bank's balance sheet: its assets and liabilities increase by the amount of a purchase, and the monetary base increases by the same amount.
Table: Change in the Central Bankโs Balance sheet following purchase of a Treasury Bond
| Assets | Liabilities |
|---|---|
| Securities (Treasury Bond) +$1billion | Reserves +$1billion |
Table: Change in the Banking systemโs balance sheet following the Central Bankโs purchase of a Treasury Bond
| Assets | Liabilities |
|---|---|
| Reserves +$1billion | |
| Securities (U.S. Treasury Bond) -$1billion |
In terms of the banking system's balance sheet, the purchase has no effect on the liabilities, and results in two counterbalancing changes on the asset side, so the net effect there is zero. For an open market sale, the effects would be the same but in the opposite direction.
๐ก Why this matters: Open market operations are the primary tool central banks use to adjust reserve levels and control short-term interest rates.
Foreign Exchange Intervention
The impact of a foreign exchange purchase is almost identical to that of an open market purchase: the central bank's assets and liabilities increase by the same amount, as does the monetary base. If the central bank buys from a commercial bank, the impact again is like the open market purchase, except the assets involved are different.
Table: Change in the Central bankโs Balance sheet following purchase of Euro-denominated German Government Bonds
| Assets | Liabilities |
|---|---|
| Foreign exchange reserves +$1billion (German government bonds in euros) | Reserves +$1billion |
Table: Change in the Banking systemโs Balance sheet following the Central bankโs purchase of Euro-denominated German Government Bonds
| Assets | Liabilities |
|---|---|
| Reserves +$1billion | |
| Securities -$1billion (German government bonds) |
Discount Loans
The central bank does not force commercial banks to borrow money; the banks ask for loans and must provide collateral, usually a Treasury bond. When the central bank makes a loan it creates an asset and a matching increase in its reserve liabilities.
Table: Change in the Central Bankโs Balance sheet following a Discount Loan
| Assets | Liabilities |
|---|---|
| Discount loans +$100million | Reserves +$100million |
Table: Change in the Banking Systemโs Balance Sheet following a Discount Loan
| Assets | Liabilities |
|---|---|
| Reserves +$100million | Discount loans +$100million |
The extension of credit to the banking system raises the level of reserves and expands the monetary base. The banking system balance sheet shows an increase in assets (reserves) and an increase in liabilities (the loan).
๐ Definition โ Discount loan: A loan from the central bank to a commercial bank, extended at the discount rate, requiring collateral (typically Treasury bonds).
Cash Withdrawal
Cash withdrawals affect only the composition, not the size, of the monetary base. When people withdraw cash they force a shift from reserves to currency on the central bank's balance sheet.
Table: Change in the Nonbank Publicโs Balance Sheet following a Cash Withdrawal
| Assets | Liabilities |
|---|---|
| Currency +$100 | |
| Checkable deposits -$100 |
The withdrawal reduces the banking system's reserves, which is a decrease in its assets, and if the funds come from a checking account, there is a matching decrease in liabilities.
Table: Change in the Banking systemโs Balance sheet following a Cash Withdrawal
| Assets | Liabilities |
|---|---|
| Reserves -$100 | Checkable deposits -$100 |
On the central bank's balance sheet both currency and reserves are liabilities, so there is just a change between the two with a net effect of zero.
Table: Change in the Central Bankโs Balance Sheet following a Cash Withdrawal
| Assets | Liabilities |
|---|---|
| Currency +$100 | |
| Reserves -$100 |
Changes in Size and Composition of Central Bankโs Balance Sheet and Monetary Base
| Transaction Initiated by | Typical action | Impact |
|---|---|---|
| Open market operation - Central bank | Purchase of Treasury bond | Increases reserves, the size of central bank's balance sheet and Monetary base |
| Foreign Exchange Intervention - Central bank | Purchase of foreign govt. bonds | Increases reserves, the size of central bank's balance sheet and Monetary base |
| Discount Loans - Commercial bank | Extension of loan to commercial bank | Increases reserves, the size of central bank's balance sheet and Monetary base |
| Cash withdrawals - Nonbank public | Withdrawal of cash from ATM | Decreases reserves and increases currency, leaving size of central bank's balance sheet and Monetary base unchanged |
โญ Key Takeaways
The monetary base consists of currency in circulation and bank reserves, and is also called high-powered money. Three types of central bank transactionsโopen market operations, foreign exchange interventions, and discount loansโincrease both the size of the central bank's balance sheet and the monetary base. In contrast, cash withdrawals by the public only change the composition of the monetary base (shifting from reserves to currency) while leaving its total size unchanged. The central bank can control the monetary base through these transactions, which gives it substantial power over the money supply. Understanding balance sheet mechanics is essential for analyzing how each transaction affects bank reserves and the broader monetary system.
๐ง Quick Revision Questions
- What are the two components of the monetary base?
- How does an open market purchase of Treasury bonds affect the central bank's balance sheet and the monetary base?
- Why do cash withdrawals change the composition but not the size of the monetary base?
- What is a discount loan, and what collateral is typically required?
- Compare the impact of a foreign exchange intervention to an open market operation on the size of the monetary base.
๐ Lecture 34 โ Deposit Creation in a Single Bank
๐ Overview: This lecture explains how a single bank creates deposits when the central bank purchases securities and how this process expands through the banking system. It introduces the deposit expansion multiplier and money multiplier, showing how reserves, excess reserves, and cash withdrawals affect the total money supply.
๐๏ธ Topics Covered
The lecture covers deposit creation in a single bank following a central bank security purchase, the expansion of deposits through a system of banks, types of reserves, the deposit expansion multiplier, the effects of excess reserves and cash withdrawals, and the money multiplier linking the monetary base to the quantity of money.
๐ Lecture Summary
Deposit Creation in a Single Bank
If the central bank buys a security from a bank, the bank gains excess reserves, which it will seek to lend out. The loan replaces the securities as an asset on the bank's balance sheet. When the central bank purchases a $100,000 Treasury bond from First Bank, First Bank's reserves increase by $100,000 and its securities decrease by $100,000.
Once First Bank grants a $100,000 loan to Office Builders Incorporated (OBI), its loans increase by $100,000 and OBI's checking account (a liability) increases by $100,000. When OBI pays its employees and suppliers through checks worth $100,000, those checks clear and reserves become $0, securities remain -$100,000, loans remain +$100,000, and checkable deposits return to $0.
๐ Definition โ Excess Reserves: Reserves held by a bank beyond the amount required by the central bank's reserve requirement ratio.
Deposit Expansion in a System of Banks
The loan First Bank made was spent, and as the checks cleared, reserves were transferred to other banks. The banks that receive the reserves will seek to lend their excess reserves, and the process continues until all of the funds have ended up in required reserves.
Types of Reserves
- Actual Reserves (R) : Total reserves held by a bank
- Required Reserves (RR = rD ร D) : The minimum amount of reserves a bank must hold, where rD is the required reserve ratio and D is deposits
- Excess Reserves (ER) : Reserves held above required reserves (ER = R โ RR)
Assumptions for the simple model: Banks hold no excess reserves, the reserve requirement ratio is 10%, currency holding does not change when deposits and loans change, and when a borrower writes a check, none of the recipients deposit funds back into the bank that initially made the loan.
When OBI uses the $100,000 loan to pay its supplier American Steel Co (ASC) , which deposits it in Second Bank, Second Bank's reserves increase by $100,000 and ASC's checking account increases by $100,000.
With a 10% reserve requirement, Second Bank keeps $10,000 in required reserves and lends out $90,000. When that $90,000 is deposited in Third Bank, Third Bank keeps $9,000 in reserves and lends $81,000. This process continues through multiple banks.
๐ Example: Fourth Bank receives $81,000 in deposits, keeps $8,100 in reserves, and lends $72,900. Fifth Bank receives $72,900, keeps $7,290 in reserves, and lends $65,610. The process continues until the total increase in deposits across the banking system reaches $1,000,000.
Deposit Expansion Multiplier
Assuming no excess reserves are held and no changes in currency held by the public, the change in deposits will be the inverse of the required deposit reserve ratio (rD) times the change in required reserves.
๐ Formula: โD = (1/rD) ร โRR
Where:
- โD = change in total deposits
- rD = required reserve ratio
- โRR = change in required reserves
Alternatively: RR = rD ร D or โRR = rD ร โD
For every dollar increase in reserves, deposits rise by 1/rD. The term (1/rD) represents the simple deposit expansion multiplier.
๐ Example: With rD = 10% (0.10) and โRR = $100,000: โD = (1/0.10) ร $100,000 = 10 ร $100,000 = $1,000,000
A decrease in reserves will generate a deposit contraction by the same multiple amount.
Deposit Expansion with Excess Reserves and Cash Withdrawals
The simple deposit expansion multiplier assumed no excess reserves and no change in currency holdings. When these assumptions are relaxed: 5% withdrawal of cash and excess reserves of 5% of deposits.
Continuing with the example: If ASC removes 5% of its new funds in cash ($5,000), that leaves $95,000 in the checking account and $95,000 in Second Bank's reserve account. If the bank wishes to hold excess reserves of 5% of deposits, it would keep total reserves of 15% of $95,000 (10% required + 5% excess) = $14,250, and make a loan of $80,750.
Table: Change in Second Bank's Balance Sheet
- Assets: Required reserves +$9,500, Excess reserves +$4,750, Loan +$80,750
- Liabilities: American Steel's checking account +$95,000
- Note: American Steel also has $5,000 in cash
๐ก Why this matters: The desire of banks to hold excess reserves and the desire of account holders to withdraw cash both reduce the impact of a given change in reserves on total deposits. The more excess reserves banks desire to hold and the more cash withdrawn, the smaller the impact.
Money Multiplier
The money multiplier shows how the quantity of money (checking accounts plus currency) is related to the monetary base (reserves in the banking system plus currency held by the nonbank public).
๐ Formula: M = m ร MB
Where:
- M = Quantity of money
- m = money multiplier
- MB = monetary base (also called High Powered Money)
Key relationships:
- Money = Currency + Checkable deposits: M = C + D
- Monetary Base = Currency + Reserves: MB = C + R
- Reserves = Required Reserves + Excess Reserves: R = RR + ER
The amount of excess reserves a bank holds depends on:
- Cost: Interest foregone by holding reserves instead of lending
- Benefit: Safety from having reserves in case of increased withdrawals
The higher the interest rate, the lower banks' excess reserves will be. The greater the concern over possible deposit withdrawals, the higher the excess reserves will be.
Introducing the Excess Reserve Ratio (ER/D) : R = RR + ER R = rD ร D + (ER/D) ร D R = (rD + (ER/D)) ร D
โญ Key Takeaways
The simple deposit expansion multiplier (1/rD) shows that a $100,000 increase in reserves can generate up to $1,000,000 in new deposits when the reserve requirement is 10%. However, when banks hold excess reserves and the public withdraws cash, the multiplier effect is reduced. The money multiplier (m) links the monetary base to the total money supply, and it decreases when banks hold more excess reserves or when the public holds more currency relative to deposits. The central bank's open market operations directly affect bank reserves, which then ripple through the banking system through multiple rounds of lending and deposit creation.
๐ง Quick Revision Questions
- What happens to a single bank's balance sheet when the central bank buys a Treasury bond from it, and how does the bank respond to having excess reserves?
- Starting with a $100,000 open market purchase and a 10% reserve requirement, what is the total increase in deposits across the banking system using the simple deposit expansion multiplier?
- How do excess reserves and cash withdrawals by the public change the deposit expansion process?
- Write the formula for the money multiplier and explain the relationship between the monetary base and the quantity of money.
- What factors determine how much excess reserves a bank chooses to hold, and how does this affect the money supply?