π Lecture 12 β LIGHT AND AUDIO
π Overview: This lecture examines the critical role of audio in television production, covering types of cameras and recording media, but focusing primarily on the importance of sound quality, microphone technology, and audio production concepts. Understanding audio is essential because despite television being a visual medium, no video is suitable for telecast without good audio.
ποΈ Topics Covered
The lecture covers types of cameras and recording media, the fundamental importance of sound in television, microphone technology including types according to technique, direction, usage, and programme, the basics of television sound including loudness and frequency measurement, listening conditions and room acoustics, detailed examination of different microphone types (dynamic, condenser, ribbon, boundary effect, contact), directional characteristics of microphones, and techniques for using off-camera microphones including booms, hanging, hidden mics, and phase cancellation.
π Lecture Summary
Types of cameras
According to utility there are different types of cameras including Handy camera, ENG camera, Full facility camera, Digital camera, XD camera, and Beta camera. Models currently in use include PD 150, PD 170, D 350, D 390, D 250 P, D 35 P, 16 MM, 35 MM, and 70 MM.
Types of tapes/disks
For Video, the types include VTR, U-matic, Beta, DVC Pro, DV cam, Mini DV, VHS, VCD, and DVD. For Audio, the types include Magnetic tape, CD, and DAT.
Importance of sound in TV
Although TV is a visual medium, there is no video suitable for telecast without good audio. There are dialogues, music, original or wild sound; all make a package for a complete telecast.
Use of microphone
The microphone is a transducer that converts acoustic or sound energy into electric energy. This is the basic function of a microphone. In television, if a microphone is in the shot, it should be presentable but should not call attention to itself. For outdoor productions, a microphone must be resistant to wind sound. When choosing a microphone, you should know four things: what type it is, what its directional characteristics are, what it sounds like, and what it looks like.
Types of microphones
According to technique: Moving coil/dynamic, Ribbon, Capacitor/condenser. According to direction: Omni or Multi-directional (picking sound all around), Bi-directional (front and rear), Uni-directional (from front only). According to usage: Neck microphone, Hand microphone, Cordless neck microphone, Cordless hand microphone, Cable neck microphone, Cable hand microphone, Boom handy (outdoor), Boom on tripod (indoor). According to programme: Drama, Talk show, Music, Magazine show, Documentary.
Television Sound: The Basics
Sound has two basic characteristics that must be controlled: loudness and frequency. With the advent of stereo and 5.1 surround-sound, audiences have much greater expectations for audio quality.
Loudness
Sound loudness is commonly measured in decibels (dBs). The first type is DBSPL (for sound pressure loudness), which is a measure of acoustic power. These are sounds we can directly hear with our ears. These decibels go to and beyond 135, which is considered the threshold of pain and the point at which permanent ear damage can occur. The second type is dBm (for the milliwatt reference level), a unit of electrical power displayed on loudness meters. In audio production, we are primarily interested in dBm.
Two types of VU meters for measuring loudness are in wide use: the digital type and the analog type. Contrary to what logic might dictate, 0dBm (generally just designated 0dB on a VU meter) is not "zero sound" but the maximum desirable sound level. The 0dB point on the meter is just a reference point. If the signal level is too low, noise can be introduced. If the level is too high (significantly above 0 dB or into the red areas), distortion will result.
π Definition β dBSPL: A measure of acoustic power (sound pressure loudness) that we can directly hear with our ears.
π Definition β dBm: A unit of electrical power displayed on VU meters, representing levels of electrical power going through audio equipment.
π Important Sound Pressure Decibel Levels (dBSPL):
- Jet Aircraft Taking Off: 140-150
- Rock Concert / Gunshots: 135-140
- Jackhammer at 15 meters / Subway: 85-90
- Average City Street / Restaurant: 70-75
- Quiet Conversation / Phone Dial Tone: 60-80
- Office Environment: 45
- Whisper at 3 meters: 30
- "Silent" TV Studio: 20
Frequency
Frequency relates to the basic pitch of a sound β how high or low it is. A frequency of 20 Hz would sound like an extremely low-pitched note, almost a rumble. At the other end, 20,000 Hz would be the highest pitched sound that most people can perceive. Frequency is measured in Hertz (Hz) or cycles per second (CPS). A person with exceptionally good hearing will be able to hear sounds from 20-20,000 Hz. The more common range used for television production is from 50 to 15,000 Hz.
The Frequency-Loudness Relationship
Even though sounds of different frequencies may technically be equal in loudness (register the same on a VU meter), human hearing does not perceive them as being of equal strength. Because of reduced sensitivity of the ear to both high and low frequencies, these sounds must be louder to be perceived as being equal to other frequencies.
Listening Conditions
A graphic equalizer allows specific bands of frequencies to be individually adjusted for loudness. It may be necessary to match audio segments recorded under different conditions or to customize audio playback to the acoustics of a specific listening area. The microphone (the initial device that transducers sound waves into electrical energy) and the audio speaker (the device that changes electrical energy back into sound waves) represent the weakest links in audio quality.
Room Acoustics
Two types of soundproofing material are used. A room with a tile floor and hard, parallel walls that reflect sound results in reverberation (a slight echo) that interferes with speech intelligibility. The ideal room for recording or listening to sound has just enough reverberation to sound realistic but not enough to reduce intelligibility.
Dynamic Microphones
The dynamic mic (also called moving-coil microphone) is considered the most rugged professional microphone. It is a good choice for electronic newsgathering (ENG) work. In a dynamic microphone, sound waves hit a diaphragm attached to a coil of fine wire suspended in the magnetic field of a permanent magnet. When sound waves hit the diaphragm, they move the coil within the magnetic field, generating a small electrical current.
Condenser/Capacitor Microphones
Condenser microphones (also called capacitor or electret condenser mics) are capable of top-notch audio quality. They work on the principle that governs an electric condenser or capacitor. An ultra-thin metal diaphragm is stretched tightly above a piece of flat metal or ceramic. Sound waves hitting the diaphragm cause fluctuations in an electrical charge, which must be greatly amplified by a preamplifier (pre-amp). Most condenser mics require a source of power, either from an AC electrical power supply or from batteries. An AC power supply built into an audio mixer is called a phantom power supply. The dual redundancy technique uses two miniature condenser mics together so if one goes out, the other can immediately be switched on.
π Definition β Phantom Power Supply: A power supply for condenser microphones built into an audio mixer or audio board, where the mic cord serves two functions: delivering the signal and carrying power.
Summary of Dynamic and Condenser Mic Pros and Cons:
| Dynamic Mic Advantages | Condenser Mic Advantages |
|---|---|
| Rugged | More Sensitive |
| Lower Cost | Better Audio Quality |
| No Power Required | Can Be Extremely Small |
| Dynamic Mic Disadvantages | Condenser Mic Disadvantages |
|---|---|
| Lower Sensitivity and Power Output | Higher self-noise |
| Larger and Heavier | More Fragile |
| Slower Response Time | More Expensive |
| Not the Best Choice for Maximum Audio Quality | Prone to Weather Problems and RF Interference |
Ribbon Mics
Ribbon mics are seldom used in TV production. Although they can impart a deep, resonant "coloring" to sound, they are fragile and highly sensitive to moving air, which precludes their use outside the studio and on most booms.
Boundary Effect Mics
PZ (also called PZM) stands for sound pressure microphone for standard video work. This mic relies entirely on reflected sound. In specific situations, such as when placed on a tabletop, a PZ mic provides pickup superior to other types.
Contact Mics
Contact mics pick up sound by being in direct physical contact with the sound source. They are generally mounted on musical instruments. Contact mics have the advantage of eliminating interfering external sounds and not being influenced by sound reflections.
Directional Characteristics
Microphones have directional characteristics β the angle of view that they "hear." There are three basic directional categories:
- Omni directional
- Bi-directional
- Unidirectional
Omni directional Mics
Omni directional mics (also called non-directional mics) are equally sensitive to sounds coming from all directions. In video production, it's almost always more desirable to use some form of directional mic to reduce unwanted sounds while maximizing sound from talent.
Bi-directional Mics
In a bi-directional sensitivity pattern (bipolar pattern), the mic is primarily responsive to sounds from two directions. It is commonly used in radio interviews for people sitting across from each other at a table.
Unidirectional Mics
Unidirectional refers to a general classification of mics that are sensitive to sounds coming primarily from one direction. There are four subdivisions: Cardioids, Super cardioids, Hyper cardioids, and Parabolic.
Cardioids
The cardioid pattern is named after a sensitivity pattern that vaguely resembles a heart shape. Mics using a cardioid pattern are sensitive to sounds over a wide range in front of the mic but relatively insensitive to sounds from behind.
Super-cardioids
The super-cardioid is even more directional than the cardioid. Whereas the cardioid has about a 180-degree angle of acceptance, the super-cardioid has about 160-degrees of coverage. Interfering off-axis sounds tend to be rejected.
Hyper-cardioid and Lobar
Hyper-cardioid and lobar patterns have 140-degrees of coverage. Highly directional shotgun mics are included in the hyper-cardioid category. Shotgun mics are one of the most widely used types for on-location video work, providing good pickup at a distance of 2 to 4 meters (7-13 feet) from talent.
Parabolic Mics
Parabolic mics represent the most highly directional type of mic application. The parabolic reflector creates the polar pattern, not the mic itself. The reflector can be from 30 cm to 1 meter (1 to 3 feet) in diameter. Parabolic microphones can pick up sound at distances of more than 60 meters (200 or more feet).
Using Off-Camera Microphones
Examples of when to use an unseen microphone include: when seeing a mic wouldn't be appropriate (dramatic production), when mic cords would restrict movement (dance number), or when there are too many people (choir). Only microphones with a super cardioid or narrower pattern should be used as off-camera mics.
Microphone Booms
Microphone booms range from a small giraffe (fish-pole mounted on a tripod) to a large perambulator boom (weighing several hundred pounds, takes two people to operate). The largest booms have a hydraulically controlled central platform controlling: left/right movement (swing), boom extension (reach), left to right panning, and vertical tilt of the microphone.
Hanging Microphones
A mic can be suspended over a performance area by tying it to a grid pipe or fixture just above the top of the widest camera shot. The disadvantage is that the mic can't be moved during production.
Hidden Microphones
Microphones are sometimes taped to the back of a prop or hidden in a table decoration. When placing mics, keep in mind the proximity effect. Sometimes several mics must be used on a set, in which case each mic not being used should be turned down or switched off.
Phase Cancellation
Phase cancellation results in low-level and hollow-sounding audio when two or more mics pick up sound from the same audio source. Because sounds arrive at the mic at slightly different times, they can cancel each other out. Four things can reduce phase cancellation:
- Place mics as close as possible to sound sources
- Use directional mics
- Turn down mics when not needed
- Carefully check and vary distances between sound sources and multiple mics (a speaker's mic should be placed at one-third or less the distance of the next nearest mic)
π Definition β Phase Cancellation: A phenomenon where two or more mics pick up sound from the same audio source, and because sounds arrive at slightly different times, they end up out of phase and can cancel each other out, resulting in low-level and hollow-sounding audio.
π‘ Why this matters: Understanding phase cancellation is critical for multi-mic setups; ignoring it can ruin an entire production's audio quality regardless of how good the individual microphones are.
β Key Takeaways
The most critical concept is that audio quality is essential for television production β no video is suitable for telecast without good audio. The microphone is a transducer that converts acoustic energy to electric energy, and choosing the right microphone requires understanding its type, directional characteristics, sound quality, and appearance. Loudness is measured in decibels (dBSPL for acoustic power, dBm for electrical power), and VU meters use 0dB as the maximum desirable level, not silence. Dynamic microphones are rugged and require no power, while condenser microphones offer superior quality but require power via phantom power or batteries. The directional characteristics of microphones (omni, bi-directional, unidirectional) determine their pickup patterns, with cardioid, super-cardioid, hyper-cardioid, and parabolic being increasingly narrow patterns essential for rejecting unwanted sounds. Finally, multiple microphones used together risk phase cancellation, which can be minimized by proper placement, using directional mics, and turning off unused mics.
π§ Quick Revision Questions
- What are the two basic characteristics of sound that must be controlled in television production, and how are they measured?
- What is the difference between dynamic and condenser microphones in terms of construction, power requirements, and ideal uses?
- What are the four subdivisions of unidirectional microphones, and what are their approximate angles of acceptance?
- What is phase cancellation, and what four steps can be taken to reduce or eliminate it when using multiple microphones?
- Why is 0dB on a VU meter considered the maximum desirable sound level rather than "zero sound," and what problems occur when audio levels are too low or too high?
π Lecture 13 β Day of Recording/Production
π Overview: This lecture focuses on the critical production stage of television, specifically the day of recording. It covers the pre-requisites for both indoor and outdoor productions, the roles of production staff and crew, rehearsals, floor management, and detailed technical operations including videotape recording, audio equipment, and battery management. Understanding this phase is essential for ensuring a smooth and high-quality programme delivery.
ποΈ Topics Covered
The lecture begins by outlining the three basic stages of television production (pre-production, production, post-production) and emphasizing the importance of the production stage. It then details the pre-requisites for indoor studio production, including studio requisition, facilities, and technical staff. The role of rehearsals and the producer's responsibilities during recording are discussed. The lecture covers camera moves, script noting, communication during recording, and the tele-light. It then shifts to pre-requisites for single camera outdoor production, including location management. Floor management and the distinction between production staff and production crew are explained. The lecture delves into the technical aspects of the day of recording, covering the control room vs. studio floor, the teleprompter machine, videotape recording (S-VHS, controls, patching, monitoring, recording procedures), audio equipment (audio console, cart machines, CD player, mix minus, developing an ear), the intercom system, batteries (Ni-Cad care and charging), and proper videotape handling.
π Lecture Summary
Pre-production, Production, Post-production
Television production consists of three basic stages. The production stage, especially the day of recording, is very important in this whole process. These stages are pre-production, production, and post-production.
Pre-requisites for Indoor Production
Before recording can begin in a studio, several items must be prepared and checked. This includes studio requisition, planning schedule, and confirming studio facilities. Essential equipment includes three cameras, microphones, a set installed (with any required changes), lighting, a panel/switcher, camera control unit, audio console, cassette recorders/players, functional monitors, a plasma, and telephones. Also required are tapes, make up, properties, wardrobe, costumes, confirmation of participants, pick and drop arrangements, gate passes, and technical staff.
Rehearsals
Rehearsals are very important before recordings as they provide an opportunity for the performers to get acquainted with the studio environment and the co-starts, ensuring harmony on the screen among them.
Producer during recordings
The producer has specific responsibilities during recording. They should not fatigue the crew with odd moves, not burden the artist with retakes, not spoil the mood of recording, and not panic while at work.
Camera Moves and mechanism of recording
These are necessary to be decided between the camera crew and the producer, determining how the camera would move and how the artists would perform accordingly. The producer tries to establish the locale and finalizes the shot divisions.
Noting on script or register
Itβs always good to keep an account of the recording which helps in the post-production phase a lot, so the producer should jot down the points on the script or some separate register.
Communication during recording
A producer is supposed to pass instructions to the persons involved in recording using different sources: a talk back microphone for the compair/anchor/host, a studio microphone to address the audience, and head phones to communicate with cameramen.
Tele-light
The tele-light, a red light on the camera, gives the indication to the artist which camera is on record and for the cameramen to know that their camera is switched so they should not spoil the shots.
Pre-requisites for single camera Outdoor Production
For an outdoor shoot, the required items include a single camera, microphones, lights, a monitor, reflector, tapes, battery charger, transport, make up, costumes, confirmation of participants, and location management. For outstation recordings, additional needs are tour authorization, accommodation, and boarding and lodging.
π‘ Why this matters: A clear and organized checklist for both indoor and outdoor productions is critical to prevent logistical failures on the day of recording.
Point to ponder: If you are well at script, you will be good on floor. If something is not clear on papers, it will not be clear on screen also.
Floor management
Floor management is an important job often done by the production assistant or the assistant director. The entries of different characters and the maintenance of different continuities are important for any production.
The production staff
The production staff are concerned primarily with the programmeβs content and development. This includes the producer, director, assistant director, lighting director, designer, and production assistant.
The production crew
The production crew are concerned with the equipment operation. This includes the cameraman, audio engineer, audio technicians, video technicians, floor manager, studio hands, studio supervisor, switcher, and recording engineer.
Understanding and harmony
Television production is a team operation requiring the combined effort of dozens of skilled individuals. Technical as well as human communication is vital for successful production. The television studio complex consists of two main areas: The Control Room and The Studio Floor.
The Control Room
It is the operational command center where programme elements are directed and coordinated. It has a panel for recording, a switcher for inter-cutting and switching between cameras, a Camera Control Unit (CCU), audio console, recorder, and a communication system for the cameramen, artists, and audience.
The studio floor
It is the area where the actual activity of production takes place, which may be the set for a talk show, drama, news bulletin, or some play having performers.
The day of recording
Television production starts with programme planning, where the overall production concept is developed and organized, and programme elements are rehearsed and coordinated. Then comes the production phase (live or recorded), followed by the post-production phase where videotape is edited. The producer should control the production in all aspects and assure the quality. The contents of the programme must be carefully watched at all following stages: Research, Script writing, Dramatization, Screenplay, Storyboard, Rehearsals, Dialogue delivery, and Accent/pronunciation.
Teleprompter machine
It is a machine to facilitate the newsreader to read the news while having direct eye contact into the lens of a camera, controlled with the feet of the newscaster. It is a screen between the reader and camera that is visible to the reader but does not affect the view of the camera. The whole script of the news bulletin is scrolled upward so the newscaster can read it without remembering the complete bulletin.
Video Tape Recording
Videotape playback and recording is standardized on the S-VHS (Super VHS) format. S-VHS recorded tapes will not play back properly in most standard VHS VCRs. Dubs from S-VHS to VHS are encouraged for portfolio purposes. Both playback and record VT (videotape) machines will playback or record VHS or S-VHS signals. NOTE: The S-VHS VCRs will play back a VHS tape, but only those recorded at standard speed (SP).
π Definition β VT Controls: Tapes may be cued by using control track (CTL) pulses or time code (TC). Both longitudinal time code (LTC) and vertical interval time code (VITC) are available. VITC is preferable with CTL as the second option. An internal Time Base Corrector (TBC) corrects jitter, allows the VCR output to be timed, and allows nominal control of picture quality (e.g., video level, set up, hue, chroma level). π Example: When using CTL, the counter may be reset to 00:00:00, and the auto stop feature may be used.
Tape transport is controlled by buttons (stop, play, pause, fast forward, rewind, search) and a shuttle knob. In shuttle mode, the tape can be advanced or rewound at 0-32x normal speed. In jog mode, tape can be advanced or rewound frame-by-frame. The READY button is used to turn the tape protection mode on and off.
Tracking adjustments may need to be made, especially for tapes recorded elsewhere, to get the clearest picture. NOTE: Return the tracking control to FIX when finished.
Video Cassette Player/Recorder
The program audio is on Normal and Hi-Fi audio channel 1, with Normal and Hi-Fi audio channel 2 reserved for the recording of the Director's PL.
Patching
Prior to recording, make sure video from the switcher program out is patched into the line input. The input select switch must be set to LINE. Audio channel 1 input should be from the program audio, and audio channel 2 should be patched from the intercom system.
Monitoring
Confirmation of proper video patching can be made by monitoring the video on a video monitor. Confirmation of proper audio patching and record levels can be made by asking the audio engineer to feed tone at 0 dB and confirming the level on A1's VU meter. Use headphones to confirm the audio content on both channels.
Recording
Before beginning to record, confirm you are cued to the proper position on the tape. Ideally, begin recording approximately 10 seconds past the end of the last recorded program. Enter the record mode by holding the REC button while pressing the PLAY button. After recording, continue to record at least 10 seconds of black video and silence before stopping tape to separate each program. π Example: Rewind the tape a bit and play back to confirm that audio and video have been recorded successfully. Projects will be recorded as often as time allows, but only the last recording will be saved.
Audio Equipment
Audio Console: The audio console is a 16-channel audio board designed for stereo operation (functioning in a monaural mode at a TV station). Each channel has three inputs (A, B, C) selected by pressing the respective switches. π Definition β Input Sources: Key inputs include A-8 for Mic inputs, 9A for Tone, 10A for BSM#13 (S-VHS source VT), 10B for Cart #1, 11B for Cart #2, 12B for Cart #3, and 12C for CD player.
Volume controlled slide faders allow for volume adjustment. Each channel has ON/START, OFF/STOP, and CUE switches. The CUE switch allows audio to be heard by the audio operator through a speaker without affecting program audio. Remote Start: The ON/START switch can provide a start cue for outboard equipment, like cart machines. Equalization: The audio console does not have equalization capabilities, but a TV station has a parametric equalizer downstream for the entire program audio mix. Mix Minus: The board has a mix minus option that allows the operator to subtract a specific channel's audio from the sum buss to eliminate feedback (e.g., with a telephone caller). π Example: When the M-button is selected, a telephone caller can have his own audio subtracted from the signal sent back down the telephone line.
Monitoring: The audio operator's headset is a double-muff with program audio in one ear and PL (intercom) in the other. Timing: A count-up clock is built into the board, useful for timing prerecorded segments. Developing an Ear: Audio engineers must be critical listeners, able to hear subtleties of tone, timbre, and acoustic presence.
Audio Cart
Cartridges are endless loops of tape which are self-cuing. They can be recorded with multiple cue points, but it is recommended to use one cart per audio cut. Cartridges must be erased (degaussed) before recording new material. The production control room (PCR) has a three-cart stack for playback only. Currently, inputs 10 B, 11 B, and 12 B are used for carts 1, 2, and 3.
Compact Disc Player
The Compact Disc (CD) player operation is similar to consumer CD players. Cuts may be cued by pressing the corresponding number on the keypad. A special feature is automatic cueing, which cues the CD to first audio. π Example: For cut #43, first press the >10 key, then the 4 key and the 3 key. To use auto cue, press the AUTO CUE button then PLAY to standby, then press PLAY again to begin.
Auxiliary Equipment
Intercom: The Clear-Com intercom system is a closed-circuit system for clear two-way communication. A belt pack station is attached to the nearest intercom jack with standard microphone cable. A headset is attached to the belt pack. To talk, press and hold the talk button, or press twice quickly to latch it on. π Definition β Operation: The volume control controls only the volume in the earphone. It is important to keep talking to a minimum and ensure the microphone is off when not speaking.
Batteries
Rechargeable batteries, the power supply for portable video, need special attention. Most professional tube cameras operate optimally at 14 volts, while CCD cameras typically require 12 volts. Nearly all portable VCRs operate at 12 volts. π Definition β Ni-Cad (Nickel Cadmium) Batteries: These are the most common type of rechargeable battery for this equipment. π Example: The camera and dockable S-VHS recorder require approximately 12 volts but will continue to operate down to approximately 10.6 volts. Heat is the number one killer of Ni-Cad batteries. Cold temperature will decrease the output. Batteries develop memories if not recharged properly.
Charge Rates: Slow (overnight, 14-16 hrs), Quick (more than 1 hr. but less than 14), and Fast (less than 1 hr., should be used sparingly). π Example: For batteries without microprocessors, charge on "quick" or "slow" rather than "fast" whenever possible. Do not overcharge a battery or run it completely dead. Store batteries in a charged condition.
Average life expectancy of Ni-Cad batteries for video/film applications is 500 cycles (range: 200 to 800 cycles). Notes on Lifesaver chargers: Keep batteries on charger until use, return to charger as soon as possible after use (within 48 hours), and do not over-discharge batteries.
Videotape
Several things should be kept in mind to insure good recordings:
- Tape needs to be handled carefully; videocassettes should be in the VCR or a case.
- Store in a cool, dry, clean place (ideal: 68 degrees and 40% relative humidity).
- Videotape should never be spliced.
- Should be stored on end to protect tape edges.
- Keep away from strong magnetic fields (monitors, speakers).
- Do not keep VCR in pause mode for long periods.
- Avoid using the first minute and last minute of tape.
- Most production facilities use tape for a single pass.
- It is a good idea to "exercise" or "fluff" a new tape (ff to end and back).
- Never use a wrinkled or creased tape.
β Key Takeaways
The day of recording is a complex operation that requires meticulous planning and execution. The producer must manage both the creative and technical aspects, from ensuring all pre-production checklists are complete to directing the camera crew and talent. Effective communication through the intercom system and a clear understanding of the recording console's patching and monitoring functions are non-negotiable for a successful shoot. Technical staff must be experts in their domains, such as the audio engineer developing a critical ear for sound mixing and the VT operator mastering tape controls and S-VHS recording procedures. Finally, proper care of equipmentβfrom Ni-Cad battery charging protocols to safe videotape handlingβis essential to prevent failures and protect the recorded material.
π§ Quick Revision Questions
- List five key pre-requisites for an indoor studio production.
- What is the primary purpose of rehearsals before a recording?
- Explain the difference between the production staff and the production crew.
- Describe the function of the Mix Minus option on an audio console.
- What are the recommended practices for charging and storing Ni-Cad batteries to extend their life?
π Lecture 14 β Linear Editing and NLE
π Overview: This lecture explores the post-production phase of television production, focusing on the editing process and its critical role in shaping the final program. It distinguishes between linear and non-linear editing techniques, explains the functions of editing equipment and the production switcher, and emphasizes the importance of the editor-producer relationship.
ποΈ Topics Covered
The lecture begins by describing different mediums of performing arts and their key personnel. It then details the editing process, including the importance of logging recorded material. The core of the lecture compares linear and non-linear editing (NLE), defines the role of the editor, and explains the operation and inputs of a production switcher used in both live and post-production.
π Lecture Summary
Introduction: Mediums and Key Personnel
Different performing arts mediums are dependent on key individuals. Film is a director medium. Theater is an actor medium. Radio is a speaker medium. Television is a producer medium. After recording (βpack upβ), the recorded material, consisting of bits and pieces called βChunksβ, is taken to the editing desk for post-production. It is essential to note all recorded chunks on paper, including the Episode, Scene, and Take, as this serves as a guideline for editing. The principle is that a βMemorandum is always better than memoryβ.
Editing
The word edit is synonymous with prepare, correct, tidy up, check over, revise, amend, change, alter, modify, adjust, and transform. It means to trim or better, add or remove from existing written or visual material.
Editing Suite/Room
The editing apparatus consists of a panel like a keyboard with a round knob to shuttle and jog on machines. Usually, three recording machines are used:
- Player 1: The source for basic visuals (main video).
- Player 2: The source for secondary data like background voice, strips, graphics, or names to be super-imposed, overlaid, or inserted on the primary video.
- Recorder: Takes the final output from both players.
Types of Editing
There are two types of editing techniques:
- Linear Editing: It is time-bound as a specific time code must be followed to access data. It is done on videocassettes and tapes using videocassette players and recorders.
- Non-linear Editing (NLE): It is not time-bound; data can be accessed with a single keystroke or mouse click. It is done on computers after transferring data from tapes, using various software programs.
Editor
The Editor plays a vital role in the post-production phase and has a direct impact on the program. Harmony and coordination between the editor and the producer are crucial, as editing can polish or tarnish the finished product. The choice between linear and non-linear editing depends on the producer, who must anticipate needs based on available technical facilities. Non-linear editing is currently more popular due to its variety of effects and more audio/video layers, while linear editing is faster and less time-consuming.
Production Switcher
A switcher is an 18-input video switcher for both live production and post-production. It can perform transitions like wipes, mixes, and keys but is not capable of digital video effects on its own. The lecture focuses on the Downstream Bus Rows (preview and program buses), with occasional use of the Key Bus Row and M/E Bus Row. During rehearsal, Technical Directors (TDs) should ask questions to understand the process.
The 18-input switcher has sixteen video bus inputs and two auxiliary inputs, including:
- BLK: Black Video
- CAM 1, 2, 3: Cameras
- VTR 1, 2: Videotape Recorders
- DEKO 1, 2: Graphics
- CB: Color Bars
- COLOR: Background color generator
- M/E: Mix/Effects bank
The Downstream Transition Group includes:
- BKG MIX: Mixes between program and preview buses.
- UNI KEY MIX: Mixes in the video signal for the uni keyer.
- DS KEY MIX: Mixes in the video signal for the downstream keyer.
- FADE: Mixes to or from black.
The Downstream Auto-transition Group includes:
- TRAN: Performs the selected transition at a specified rate.
- TRAN REV: Performs the transition in reverse order.
- CUT: Performs an instantaneous transition.
Switcher Inputs
A detailed list of the 18 switcher inputs is provided:
- 0: Black
- 1: Routing Switcher
- 2: VTR 1 (DVC PRO 1)
- 3: VTR 2 (DVC PRO 2)
- 4: VTR 3 (BETA SP PB/REC)
- 5: VTR 4 (BETA SP PB)
- 6: VTR 5 (3/4 INCH)
- 7-10: Camera 1-4
- 11: Synchronizer
- 12: Color Bars
- 13-14: DEKO 1 & 2
- 15: Toaster 2
- 16: A51
- 17: Color
- 18: M/E
β Key Takeaways
Television is a producerβs medium, and post-production editing is a critical phase where raw footage, or βchunks,β is assembled into a final program. The choice between time-bound linear editing and flexible non-linear editing (NLE) depends on the projectβs needs and available technology. The editor plays a key role, and effective collaboration with the producer is essential for a polished outcome. A production switcher is a complex device used for creating live video transitions (wipes, mixes, fades, cuts) and managing multiple video sources.
π§ Quick Revision Questions
- Define βChunksβ in the context of television production.
- What are the key differences between linear and non-linear editing (NLE)?
- Why is a memorandum or noting of βEpisode, Scene, Takeβ considered better than memory?
- What are the primary roles of Player 1, Player 2, and the Recorder in a linear editing suite?
- Name four buttons from the Downstream Transition Group of a production switcher and their functions.
π Lecture 15 β Mixing and Uses of Effects
π Overview: This lecture covers the technical and creative aspects of mixing in TV production, including various visual and audio effects used to enhance the aesthetic quality of a program. It also provides an extensive practical guide to creating live sound effects (SFX) using everyday objects, which is essential for adding realism and impact to productions when prerecorded effects are unavailable.
ποΈ Topics Covered
This lecture explores the mixing and use of effects to beautify a production, covering animations, graphics, windows, brackets, and a wide range of visual effects like Dissolve, Wipe, and Page turn over. It details the use of superimpositions for names, callers, and contact information, along with Promo and Recap preparation, and the audio mixing of music by adjusting foreground, midground, and background levels. The second major section provides an exhaustive list of techniques for creating live sound effects (SFX) for actions such as arrows, breaks, crashes, footsteps, and many more, using common materials.
π Lecture Summary
Animations, Graphics, Windows, Brackets, Effects
Mixing and the use of effects are techniques employed to beautify a production. They add "colour" to the programme through the use of animations, graphics, windows, and brackets. A variety of visual effects are utilized, including Zoom out, Zoom in, Page turn over, Dip to black, Fade in, Fade out, Dissolve, Cross fade, Wipe, and Swap.
Colour Tone, Title, End Credits, Breaks, Bumpers
The process of mixing also includes the adjustment of Colour tone. Other essential elements prepared through mixing are Title cards, End credits, Breaks, Bumpers, Scroll text, and Strips.
Superimpositions, Names, Callers, Phone number, Email, Website
Superimpositionsβsuch as Names, Callers information, Phone number, Email, and Website addressesβare also created using mixing techniques.
Promo, Recap
Additionally, Promo (promotional content) and Recap (recaps of previous content) are prepared through the mixing process.
Music: Foreground, Midground, Background, Choice of music, Sound leveling
Music is adjusted through audio mixing by placing it in the Foreground, Midground, or Background of the audio track. A careful Choice of music is exercised, and Sound leveling is performed to ensure all audio elements are balanced.
π‘ Why this matters: Understanding how to layer visual elements and balance audio levels is fundamental to professional TV production, ensuring that the final product is engaging and clear for the audience.
Live Sound Effects
Live Sound Effects (SFX) are often needed when commercially available sound effects libraries lack the perfect sound for a specific duration, intensity, or character. In such cases, artists can create manual sound effects using creative tricks to sync up with projected film or video images. This art is specialized and used primarily for feature film post-production, but these techniques can also be useful in a pinch for television.
π Definition β Sound Effects (SFX): Sounds artificially created or enhanced for use in a film, television program, or other media to create a specific mood or underscore an action. π Definition β Synchronization (Sync): The process of matching audio (such as sound effects) to corresponding visual actions in a film or video.
When recording live SFX, it is crucial to take care in choosing a microphone, as the pickup pattern and location make a great difference in the recorded sound. The acoustics of the working location must also be considered.
π Example β ARROW IN FLIGHT: 1) Use a 1/4-inch dowel rod approximately two feet long. Holding it at one end, sharply sweep it down past the mic at a distance of six inches. 2) For a shrill high-pitched swish, use a piece of umbrella rib with the open side facing the direction of the thrust past the mic. The twang of a large rubber band can be used for the sound of the bow. π Example β BODY FALL: 1) Drop a melon from the top of a ladder onto a slab of concrete. 2) Drop a gunny sack filled with sawdust or sand on a hard floor. 3) For a truly gory fall, empty a bucket of wet rags on a slab of cement. π Example β FOOTSTEPS IN SNOW: Squeeze a box of cornstarch with the fingers in the proper rhythm. Better yet, put the cornstarch in a chamois bag. π Example β GUNSHOT: 1) Strike a leather cushion with a thin flat stick. 2) Prick an inflated rubber balloon with a pin. 3) Hit a large corrugated box with a curtain rod. π Example β FIRE: 1) Gently twist a piece of cellophane close to the mic. 2) For larger fires, add the frequent snap of crackling pieces of a berry box. 3) To get a sudden flare of flames, snap open an umbrella, then bring in the crackle of cellophane. π Example β RAIN: 1) Take a ball of cellophane and loosely wrap it in tissue paper, then roll it slightly between the hands. 2) Drop salt on different materials; for a tin roof sound, drop the salt on a piece of metal. π Example β LOCOMOTIVES: The beat or rhythm differs between freight and passenger steam locomotives. The freight engine rhythm is "CHUFF chuff, CHUFF chuff" (every other beat is accented). The passenger train sounds like "CHUFF chuff chuff chuff, CHUFF chuff chuff chuff" (the accent is on the first of every four beats).
π‘ Why this matters: These sound effect recipes are invaluable for radio drama, film, and TV production, allowing sound designers to create believable and engaging audio environments without expensive libraries.
β Key Takeaways
The critical function of mixing in TV production is to beautify the programme by filling it with colour through the use of animations, graphics, and a wide array of visual effects like fades, dissolves, wipes, and page turns. Superimpositions, end credits, and bumpers are all prepared via the mixing process, and effective audio mixing requires placing music in the foreground, midground, or background with careful sound leveling. When prerecorded sound effects are unavailable, live SFX can be created manually using everyday objectsβfor instance, gunshots can be simulated by striking a leather cushion or pricking a balloon. The key to good SFX lies in microphone choice, placement, and the acoustics of the environment. Rhythm and character are important, as seen in the different "chuff" patterns for freight versus passenger locomotives.
π§ Quick Revision Questions
- What is the primary purpose of mixing and using effects in a production, according to the lecture?
- Name at least four different visual effects that can be created using mixing techniques.
- In audio mixing, what are the three levels at which music can be placed?
- According to the lecture, when would a production team need to create live sound effects instead of using a sound effects library?
- Describe a technique for creating the sound effect of a "Body Fall" into water.