π Lecture 23 β Various Economic Dynamics Using Differential Equations
π Overview: This lecture applies first-order linear differential equations to model the dynamic behavior of various economic variables, including the value of natural resources (oil wells and gold mines), net revenue from nonrenewable resources (Hotelling's Rule), bank deposits, monthly sales of new products, and population growth. It demonstrates how to derive time paths, assess dynamic stability, and solve for specific future values.
ποΈ Topics Covered
This lecture covers five distinct applications: dynamics of oil well value (Topic 094), dynamics of gold mine value (Topic 095), Hotelling's Rule for nonrenewable resources (Topic 096), future value of bank deposits (Topic 097), dynamics of monthly sales using a logistic-type model (Topic 098), and dynamics of population growth (Topic 099). Each application follows a systematic procedure: setting up the differential equation, identifying the case (homogenous vs. non-homogenous), finding the definite solution, and analyzing dynamic stability.
π Lecture Summary
TOPIC 094: DYNAMICS OF VALUE OF OIL WELL USING DIFFERENTIAL EQUATIONS
The initial value of an oil well is V(0) = $2700, and its value decays according to the differential equation dV/dt + 0.04 V(t) = 28. This models the depreciation of a natural resource asset over time.
π Definition β Time Path: The function V(t) describing the value of a variable at any point in time. The general solution is y(t) = {y(0) - b/a} e^{-at} + b/a for the Non-Homogenous Case with a β 0.
π Formula: For dV/dt + aV = b with a β 0 and b β 0, the definite solution is V(t) = {V(0) - b/a} e^{-at} + b/a. Substituting a = 0.04, b = 28, V(0) = 2700: V(t) = (2700 - 28/0.04) e^{-0.04t} + 28/0.04 = (2700 - 700) e^{-0.04t} + 700 = 2000 e^{-0.04t} + 700.
π Example: To find the future value at t = 10: V(10) = 2000 e^{-0.04*10} + 700 = 2000 e^{-0.4} + 700. Since e^{-0.4} β 0.6703, V(10) = 2000(0.6703) + 700 = 1340.6 + 700 = $2040.6. The time path shows decay from $2700 to equilibrium V = 700*. π‘ Why this matters: This models the declining economic value of a finite resource as it is extracted over time.
TOPIC 095: DYNAMICS OF VALUE OF GOLD MINE USING DIFFERENTIAL EQUATIONS
The initial value of a gold mine is G(0) = $1,400, decaying at the rate dG/dt + 0.04 G(t) = 16. This is structurally identical to the oil well problem.
π Definition β Dynamic Stability: A time path is dynamically stable if the deviation from equilibrium (complementary function) approaches zero as time goes to infinity (t β β).
π Formula: Using the same NHCaβ 0 form with a = 0.04, b = 16: G(t) = {G(0) - b/a} e^{-at} + b/a = {1400 - 16/0.04} e^{-0.04t} + 16/0.04 = (1400 - 400) e^{-0.04t} + 400 = 1000 e^{-0.04t} + 400.
π Example: At t = 10: G(10) = 1000 e^{-0.4} + 400 = 1000(0.6703) + 400 = $1070.30. The complementary function G_c = 1000 e^{-0.04t} β 0 as t β β, so the time path converges to equilibrium G = 400*.
TOPIC 096: HOTELLING'S RULE USING DIFFERENTIAL EQUATIONS
Hotelling's Rule, named after economist Harold Hotelling, states that the net revenue Ο(t) from extracting a nonrenewable resource grows exactly at the rate of interest r.
π Definition β Hotelling's Rule: The optimal extraction path occurs when the growth rate of net revenue equals the interest rate: Ο'(t)/Ο(t) = r, or equivalently, dΟ/dt = r Ο(t).
π Formula: Rewriting as dΟ/dt - rΟ = 0 gives a = -r, b = 0, which is a Homogenous Case (HC) with a β 0. The definite solution for HC is y(t) = {y(0)} e^{-at}. Substituting: Ο(t) = {Ο(0)} e^{-(-r)t} = {Ο(0)} e^{rt}. Wait β checking the substitution: The standard form is dy/dt + ay = 0 with y(t) = y(0) e^{-at}. Here dΟ/dt - rΟ = 0 means a = -r, so Ο(t) = Ο(0) e^{-(-r)t} = Ο(0) e^{rt}.
π Example: For Hotelling's Rule, Ο(t) = Ο(0) e^{rt}. However, the lecture presents the solution as Ο(t) = {Ο(0)} e^{-rt}, which represents a decay model. This discrepancy requires careful attention β the rule formalized states net revenue grows at rate r, suggesting Ο(t) = Ο(0) e^{rt}. The lecture solution with Ο(t) = Ο(0) e^{-rt} would show convergence to zero, not growth. Seek clarification on which formulation is correct for the exam. π‘ Why this matters: This rule is fundamental for understanding the economics of nonrenewable resource extraction and optimal depletion policies.
TOPIC 097: FUTURE VALUE OF INVESTMENT USING DIFFERENTIAL EQUATIONS
An initial deposit D(0) = $1,300 grows according to dD/dt - 0.05 D(t) = 15. Note the minus sign β rewriting gives dD/dt + (-0.05) D = 15, so a = -0.05 and b = 15.
π Definition β Complementary Function (Deviation): The part of the time path y_c that represents the deviation from equilibrium. For dynamic stability, y_c β 0 as t β β.
π Formula: D(t) = {D(0) - b/a} e^{-at} + b/a. Substituting a = -0.05, b = 15: D(t) = {1300 - 15/(-0.05)} e^{-(-0.05)t} + 15/(-0.05) = {1300 + 300} e^{0.05t} - 300 = 1600 e^{0.05t} - 300.
π Example: Checking against the lecture: D(t) = (1300 - 300) e^{-0.05t} + 300 = 1000 e^{-0.05t} + 300. Wait β the lecture uses a = 0.05 (positive), but the given equation is dD/dt - 0.05D = 15, meaning a = -0.05. This is a critical inconsistency to verify. The table shows D_c = 1000 e^{-0.05t} β 0, converging to D = 300*.
TOPIC 098: DYNAMICS OF MONTHLY SALES USING DIFFERENTIAL EQUATIONS
Monthly sales S(t) of a new product satisfy dS/dt = k(M - S) with S(0) = C, where k, M, C are positive constants.
π Definition β Saturation Level (M): The maximum possible monthly sales that the market can absorb β the equilibrium sales level S*.
π Formula: Rewriting dS/dt + kS = kM: a = k, b = kM. Using the NHCaβ 0 solution: S(t) = {S(0) - b/a} e^{-at} + b/a = {C - kM/k} e^{-kt} + kM/k = (C - M) e^{-kt} + M.
π Example: If initial sales C = 0, then S(t) = -M e^{-kt} + M = M(1 - e^{-kt}). As t β β, e^{-kt} β 0, so S(t) β M. Dynamic stability holds regardless of whether C > M or C < M, since e^{-kt} β 0 for k > 0. π‘ Why this matters: This model (similar to the logistic or Bass diffusion model) predicts how new products penetrate markets over time.
TOPIC 099: DYNAMICS OF POPULATION USING DIFFERENTIAL EQUATIONS
A country's population N is currently 5 million and grows according to dN/dt = 0.015 N, where t is in years.
π Definition β Dynamic Instability: A time path is dynamically unstable if the deviation from equilibrium grows without bound as t β β.
π Formula: dN/dt - 0.015N = 0 gives a = -0.015, b = 0 (Homogenous Case). Definite solution for HC: N(t) = N(0) e^{-at} = N(0) e^{-(-0.015)t} = 5,000,000 e^{0.015t}.
π Example β Doubling Time: When does N = 10,000,000? 10,000,000 = 5,000,000 e^{0.015T}. Dividing: 2 = e^{0.015T}. Taking natural logs: ln(2) = 0.015T. So T = ln(2)/0.015 = 0.693147/0.015 = 46.2 years. The positive exponent (0.015t) means N_c β β as t β β, making this dynamically unstable. π‘ Why this matters: Policy-makers use such models to plan for infrastructure, healthcare, and educational needs based on population projections.
β Key Takeaways
The most critical thing to remember is the standard form of a first-order linear differential equation: dy/dt + a y = b, and its three-case solution method: if b = 0 use y(t) = y(0) e^{-at} (Homogenous); if b β 0 and a = 0 use y(t) = y(0) + b t; if b β 0 and a β 0 use y(t) = {y(0) - b/a} e^{-at} + b/a (Non-Homogenous). For dynamic stability, you check whether the exponent in the complementary function is negative β if yes, y_c β 0 and the time path converges to equilibrium (y* = b/a); if positive, the path diverges and is unstable. The equilibrium or steady-state value is always y = b/a* for the non-homogenous case with a β 0. Be careful with sign of a β always rewrite the equation into dy/dt + a y = b form first.
π§ Quick Revision Questions
-
An oil well with initial value $5000 decays according to dV/dt + 0.05V = 20. What is the equilibrium value V*, and is the time path dynamically stable or unstable?
-
For Hotelling's Rule, the equation is dΟ/dt = rΟ. What is the value of a and b when written in standard form dΟ/dt + aΟ = b?
-
A bank deposit grows according to dD/dt - 0.03D = 10 with D(0) = 2000. What are a and b in standard form, and what is the definite solution D(t)?
-
Monthly sales follow dS/dt = 0.1(500 - S) with S(0) = 100. How long will it take for sales to reach 90% of the saturation level?
-
A population grows as dN/dt = 0.02N with N(0) = 2 million. What is the doubling time? Is this system dynamically stable or unstable?
π Lecture 24 β VARIOUS ECONOMIC DYNAMICS USING DIFFERENTIAL EQUATIONS (CONTINUED)
π Overview: This lecture applies first-order linear differential equations to model the dynamic behavior of various economic and natural phenomena. It demonstrates how to solve, interpret, and assess the dynamic stability of time-paths for government spending, fuel consumption, unemployment, sales growth, ore mining, pollutant decay, and fish stock populations.
ποΈ Topics Covered
The lecture covers seven distinct applications: dynamics of government spending with a homogeneous differential equation, dynamics of fuel consumption with a non-homogeneous equation, dynamics of unemployment, limited growth models for sales volume, dynamics of ore mining with exponential growth, dynamics of atmospheric pollutant decay, and dynamics of fish stock growth toward a carrying capacity. Each application involves solving a differential equation, finding the definite time-path, and analyzing dynamic stability.
π Lecture Summary
TOPIC 100: DYNAMICS OF GOVERNMENT SPENDING USING DIFFERENTIAL EQUATIONS
Government expenditure, (G), satisfies the differential equation: (\frac{dG}{dt} = -0.05G), where (G) is measured in billions of dollars and time (t) is in years. The initial condition is (G(0) = 500).
This is a homogeneous case because (b = 0) and (a \neq 0). The standard form is (\frac{dy}{dt} + a y = b). Here, (\frac{dG}{dt} + 0.05G = 0), so (a = 0.05) and (b = 0).
π Definition β Definite Solution of time-path of HC: (y(t) = {y(0)} e^{-a t})
Substituting values, the definite time-path for government expenditure is: [G(t) = (500)e^{-0.05t}]
Dynamic Stability: For dynamic stability, the deviation component ((G_c)) must fade to zero as (t \to \infty). Since the particular solution (G_p = 0), convergence should be toward zero. The expression (G(t) = (500)e^{-0.05t}) has a negative exponent, so it approaches zero as (t \to \infty). Therefore, the time-path of government expenditure converges toward equilibrium and is dynamically stable.
π Formula: (G(t) = (500)e^{-0.05t}) β Government spending decays exponentially from $500 billion. π Example: To find government spending after 6 years: (G(6) = (500)e^{-0.05(6)} = (500)e^{-0.3} = $370.409) billion.
TOPIC 101: DYNAMICS OF FUEL CONSUMPTION USING DIFFERENTIAL EQUATIONS
Let (F(x)) denote the number of liters of fuel left in an aircraftβs fuel tank after flying (x) km. The fuel consumption satisfies: (F'(x) = -0.001F(x) - 8), with initial fuel (F(0) = 12000).
This is a non-homogeneous case because (b \neq 0) and (a \neq 0). Rewriting: (\frac{dF}{dx} + 0.001F = -8), so (a = 0.001), (b = -8).
π Definition β Definite Solution of time-path of NHC with (a \neq 0): (y(t) = \left{ y(0) - \frac{b}{a} \right} e^{-a t} + \frac{b}{a})
Substituting values: [F(t) = \left{12000 - \frac{(-8)}{0.001}\right} e^{-(0.001)t} + \frac{(-8)}{0.001}] [F(t) = {12000 + 8000} e^{-(0.001)t} - 8000] [F(t) = 20000 e^{-0.001t} - 8000]
Dynamic Stability: The complementary function (deviation) is (F_c = 20000 e^{-0.001t}). As (t \to \infty), (F_c \to 0), so the time-path converges to equilibrium (F^* = 8000). The time-path is dynamically stable.
π‘ Why this matters: The equilibrium value of 8000 liters represents the fuel remaining when the plane is empty of passengers but still has fuel for the aircraft's own weight.
| Time (t) | Deviation (F_c = 20000 e^{-0.001t}) | Time-Path (F(t)) | Remarks |
|---|---|---|---|
| 0 | 20000 | 28000 | Positive deviation decays |
| 10 | 19800.9 | 27800.9 | Time-path slides toward equilibrium (F^* = 8000) |
| β | β 0 | β 8000 | Convergence |
TOPIC 102: DYNAMICS OF UNEMPLOYMENT USING DIFFERENTIAL EQUATIONS
Unemployment (U) (in thousands) in a small economy satisfies: (\frac{dU}{dt} = -3U + 180), with initial condition (U(0) = 150).
This is a non-homogeneous case with (a \neq 0). Rewriting: (\frac{dU}{dt} + 3U = 180), so (a = 3), (b = 180).
Using the definite solution formula: [U(t) = \left{150 - \frac{180}{3}\right} e^{-3t} + \frac{180}{3}] [U(t) = (150 - 60)e^{-3t} + 60] [U(t) = 90e^{-3t} + 60]
Dynamic Stability: The deviation (U_c = 90e^{-3t}) decays rapidly to zero as (t \to \infty). The time-path converges to equilibrium (U^* = 60) (thousand). The time-path is dynamically stable.
π Example: At (t = 5) years, unemployment is approximately (60.0000275) thousand (essentially at equilibrium).
TOPIC 103: LIMITED GROWTH USING DIFFERENTIAL EQUATIONS
This model represents limited growth, where a variable grows rapidly initially but levels off just short of a maximum limit. The differential equation is of the type (\frac{dy}{dt} = r(A - y)), where (A) is the maximum limit.
For a new printer, the rate of sales (Q) satisfies: (\frac{dQ}{dt} = 0.04(700 - Q)), with (Q(0) = 0).
Rewriting: (\frac{dQ}{dt} + 0.04Q = 28), so (a = 0.04), (b = 28).
Using the definite solution formula: [Q(t) = \left{0 - \frac{28}{0.04}\right} e^{-0.04t} + \frac{28}{0.04}] [Q(t) = (0 - 700)e^{-0.04t} + 700] [Q(t) = -700e^{-0.04t} + 700]
Dynamic Stability: The deviation (Q_c = -700e^{-0.04t}) is negative and decays to zero. The time-path rises from 0 and converges to equilibrium (Q^* = 700) printers. The time-path is dynamically stable.
π Example: After 100 years, (Q(100) = -12.8209 + 700 = 687.179) printers sold, approaching the maximum of 700.
TOPIC 104: DYNAMICS OF ORE MINING USING DIFFERENTIAL EQUATIONS
The rate of ore mining satisfies: (\frac{dM}{dt} = 0.02M), with initial reserves (M(0) = 400) million tons in 1989.
This is a homogeneous case. Rewriting: (\frac{dM}{dt} - 0.02M = 0), so (a = -0.02), (b = 0).
Using the definite solution for HC: [M(t) = {M(0)} e^{-a t}] [M(t) = (400)e^{-(-0.02)t}] [M(t) = (400)e^{0.02t}]
Dynamic Stability: The particular solution (M_p = 0), but here the exponent is positive. The deviation (M_c = 400e^{0.02t}) grows to infinity as (t \to \infty). Therefore, the time-path is dynamically unstable β ore reserves diverge away from equilibrium.
π‘ Why this matters: A positive exponent indicates exponential growth of mining, which is unsustainable and will deplete finite reserves.
TOPIC 105: DYNAMICS OF POLLUTANT USING DIFFERENTIAL EQUATIONS
The amount of sulphur dioxide (P) (in tons) satisfies: (\frac{dP}{dt} = -0.2P), with initial release (P(0) = 50) tons.
This is a homogeneous case. Rewriting: (\frac{dP}{dt} + 0.2P = 0), so (a = 0.2), (b = 0).
Using the definite solution: [P(t) = (50)e^{-0.2t}]
Dynamic Stability: With a negative exponent, the deviation decays to zero. The time-path converges toward equilibrium (0 tons). The time-path is dynamically stable.
π Example: After 10 hours, (P(10) = 50e^{-2} = 6.767) tons of sulphur dioxide remaining.
TOPIC 106: DYNAMICS OF FISH STOCK USING DIFFERENTIAL EQUATIONS
The fish stock (F) (in thousands) in an inland lake satisfies: (\frac{dF}{dt} = 0.12(80 - F)), with initial condition (F(0) = 0).
Rewriting: (\frac{dF}{dt} + 0.12F = 9.6), so (a = 0.12), (b = 9.6).
Using the definite solution formula: [F(t) = \left{0 - \frac{9.6}{0.12}\right} e^{-0.12t} + \frac{9.6}{0.12}] [F(t) = (0 - 80)e^{-0.12t} + 80] [F(t) = -80e^{-0.12t} + 80]
Dynamic Stability: The deviation (F_c = -80e^{-0.12t}) decays to zero. The time-path rises from 0 and converges to equilibrium (F^* = 80) (thousand fish). The lake has a maximum carrying capacity of 80,000 fish.
π Example: To find years to reach 40,000 fish (i.e., (F = 40)): [40 = -80e^{-0.12t} + 80] [80e^{-0.12t} = 40] [e^{-0.12t} = 0.5] [t = \frac{\ln(0.5)}{-0.12} = 5.78 \text{ years}]
β Key Takeaways
The critical exam concepts are: (1) Identifying whether a differential equation is homogeneous ((b=0)) or non-homogeneous ((b \neq 0)) determines which solution formula to use. (2) Dynamic stability depends entirely on the sign of the exponent in the complementary function β a negative exponent ((-a < 0)) means the deviation decays to zero and the time-path is stable, while a positive exponent means instability. (3) For non-homogeneous cases, the equilibrium value is given by (\frac{b}{a}). (4) Limited growth models ((dy/dt = r(A - y))) always have a stable equilibrium at (y^* = A), and the solution follows an exponential approach from below. (5) The specific applications (government spending, unemployment, fish stock, etc.) differ only in their numerical parameters, but the mathematical solution method is identical for equations with the same structure.
π§ Quick Revision Questions
- A differential equation of the form (dG/dt = -0.05G) is classified as which case, and what is the general solution formula?
- For the fuel consumption model (F'(x) = -0.001F(x) - 8), what is the equilibrium value of remaining fuel, and how do you know the time-path is dynamically stable?
- In the unemployment model (dU/dt = -3U + 180) with (U(0)=150), what is the value of the deviation component after 1 year?
- What condition determines whether a first-order linear differential equation produces dynamic stability or instability in the homogeneous case?
- For the fish stock model (dF/dt = 0.12(80-F)), what is the maximum carrying capacity, and how many years does it take to reach 40 thousand fish?
π Lecture 25 β EXACT DIFFERENTIAL EQUATIONS
π Overview: This lecture covers the solution of first-order differential equations with variable coefficients and variable terms, distinguishing between homogeneous and non-homogeneous cases. It then introduces exact differential equations as a method for solving nonlinear differential equations, including the exactness test and the use of integrating factors to convert inexact equations into exact ones.
ποΈ Topics Covered
This lecture begins by revisiting the standard form of first-order differential equations and classifying them into homogeneous and non-homogeneous cases based on the variable term. It then derives the general solution for the homogeneous case and presents the borrowed formula for the non-homogeneous case, followed by detailed numerical examples for both. The lecture transitions to nonlinear differential equations, introducing the concept of exact differential equations, developing the exactness test using Young's Theorem, and providing a 4-step solution procedure with a numerical example. Finally, it addresses inexact differential equations and explains both the trial-and-error and formula-based methods for finding integrating factors to convert them into exact equations.
π Lecture Summary
TOPIC 107: FIRST-ORDER DIFFERENTIAL EQUATIONS: VARIABLE TERM & VARIABLE COEFFICIENT: HOMOGENEOUS CASE
The standard form of a first-order differential equation with variable coefficients is given by dy/dt + u(t) Β· y = w(t) , where u(t) and w(t) are functions of time, not constants. This leads to two possible cases: Case I (Homogeneous) where u(t) β 0, w(t) = 0, and Case II (Non-Homogeneous) where u(t) β 0, w(t) β 0.
For the homogeneous case, the equation becomes dy/dt + u(t)y = 0, which simplifies to dy/dt = -u(t)y. Separating variables and integrating with respect to t yields the general solution y(t) = Ae^(-β«u(t)dt) , where A is an arbitrary constant. This formula shows that the dependent variable y follows an exponential path determined by the integral of the variable coefficient u(t).
π Definition β First-Order Differential Equation (Homogeneous): A differential equation of the form dy/dt + u(t)y = 0, where u(t) is a variable coefficient and the term w(t) equals zero.
π Formula: y(t) = Ae^(-β«u(t)dt) β The general solution where A is a constant and the exponent is the negative integral of the variable coefficient.
π Example: Find the general solution of dy/dt + 3tΒ²y = 0. Here, u(t) = 3tΒ² and w(t) = 0. Solving the exponent: β«u(t)dt = β«3tΒ²dt = 3β«tΒ²dt = 3(tΒ³/3) + c = tΒ³ + c. Substituting into the formula: y(t) = Ae^(-(tΒ³ + c)) = A Γ e^(-tΒ³) Γ e^(-c) = B Γ e^(-tΒ³), where B = A Γ e^(-c) is another constant. Therefore, the general solution is y(t) = Be^(-tΒ³) .
π‘ Why this matters: The solution shows that when the variable coefficient is a power function of t, the time path of y is governed by an exponential function with a polynomial exponent.
TOPIC 108: FIRST-ORDER DIFFERENTIAL EQUATIONS: VARIABLE TERM & VARIABLE COEFFICIENT: NON-HOMOGENEOUS CASE
For the non-homogeneous case where u(t) β 0 and w(t) β 0, the standard form is dy/dt + u(t)y = w(t) . The general solution for this case is borrowed from the method of exact differential equations and is given by y(t) = e^(-β«u dt) {A + w β« e^(β«u dt) dt} . For simplicity, u and w are used to represent u(t) and w(t). A definite solution can be found by substituting initial conditions.
π Definition β First-Order Differential Equation (Non-Homogeneous): A differential equation of the form dy/dt + u(t)y = w(t), where both u(t) and w(t) are non-zero variable functions.
π Formula: y(t) = e^(-β«u dt) {A + w β« e^(β«u dt) dt} β The general solution where A is an integration constant, and the solution involves an exponential factor multiplied by a term containing an integral.
π Example: Find the general solution of dy/dt + 2ty = t. Here, u(t) = 2t and w(t) = t. First, solve the exponent: β«u(t)dt = β«2t dt = tΒ² + cβ. Substituting into the formula: y(t) = e^(-(tΒ² + cβ)) {A + t β« e^(tΒ² + cβ) dt} = e^(-tΒ²)e^(-cβ) {A + e^(cβ) Γ t Γ β« e^(tΒ²) dt}. Using the natural exponential function rule: β« e^(tΒ²) dt = e^(tΒ²)/(2t). Thus, y(t) = e^(-tΒ²)e^(-cβ) {A + e^(cβ) Γ t Γ (e^(tΒ²)/(2t)) + cβ}. Simplifying: y(t) = e^(-tΒ²)e^(-cβ)A + e^(-cβ)e^(cβ) Γ (1/2) + e^(-tΒ²)e^(-cβ)cβ = Ae^(-cβ)e^(-tΒ²) + (1/2) + ce^(-cβ)e^(-tΒ²). Consolidating constants: y(t) = Be^(-tΒ²) + 1/2, where B = (Ae^(-cβ) + c). The general solution is y(t) = Be^(-tΒ²) + 1/2.
π‘ Why this matters: The non-homogeneous case introduces a constant term in the solution, showing how the variable term w(t) affects the equilibrium value of the system.
TOPIC 109: NON-LINEAR DIFFERENTIAL EQUATION: EXACT DIFFERENTIAL EQUATIONS
Nonlinear differential equations can have the power of the dependent variable y greater than or other than 1. They can be solved using three methods: I- Exact Differential Equation Method, II- Separable Variables Method, and III- Bernoulli Equation Method. An exact differential equation can be either linear or nonlinear by itself.
Given a function of two variables F(y, t) = k, its total differential is d{F(y, t)} = d(k), which expands to (βF/βy)dy + (βF/βt)dt = 0. The function F(y, t) = k represents an Exact Differential Equation (EDE) as its total differential satisfies this equation. To develop an exactness test, we use Young's Theorem, which states that for a function F(y, t), the cross partial derivatives are equal: β/βt(βF/βy) = β/βy(βF/βt) . Substituting M = βF/βy and N = βF/βt, the exactness test becomes βM/βt = βN/βy. The exact differential equation form is (M)dy + (N)dt = 0.
π Definition β Exact Differential Equation (EDE): A differential equation of the form (M)dy + (N)dt = 0 that satisfies the exactness test βM/βt = βN/βy, meaning it is the total differential of some function F(y, t) = k.
π Formula: βM/βt = βN/βy β The exactness test that confirms whether a differential equation is exact.
TOPIC 110: EXACT DIFFERENTIAL EQUATIONS: NUMERICAL
Given the differential equation 2yt dy + yΒ² dt = 0, compare with standard form M dy + N dt = 0. Here, M = 2yt and N = yΒ². Apply the exactness test: βM/βt = β(2yt)/βt = 2y, and βN/βy = β(yΒ²)/βy = 2y. Since βM/βt = βN/βy (2y = 2y) , the equation is an Exact Differential Equation.
The 4-step procedure for solving an Exact Differential Equation is as follows: Step I: Write the preliminary function F(y, t) in terms of derivative and integral with respect to y: F(y, t) = β« M dy + Ο(t), where Ο(t) combines the integration constant and any terms containing t only. Substituting M = 2yt: F(y, t) = β« 2yt dy + Ο(t) = 2t β« y dy + Ο(t) = 2t(yΒ²/2) + Ο(t) = yΒ²t + Ο(t) . Step II: Differentiate F(y, t) with respect to t: βF/βt = β(yΒ²t + Ο(t))/βt = yΒ² + Ο'(t). Since βF/βt = N, and N = yΒ², we have yΒ² = yΒ² + Ο'(t), so Ο'(t) = 0. Step III: Integrate Ο'(t) to find Ο(t): β« Ο'(t) dt = β« 0 dt, so Ο(t) = k, where k is a constant. Step IV: Substitute the result from Step III into Step I: F(y, t) = yΒ²t + k. Since d{F(y, t)} = 0 implies F(y, t) = c_F, we have c_F = yΒ²t + k, or yΒ²t = c_F - k = c'. This gives the implicit solution yΒ²t = c'. Converting to explicit form: yΒ² = c'/t, so y(t) = β(c'/t) = βc'/βt = c/t^(1/2) .
π Definition β 4-Step Procedure for Exact DE: A systematic method for solving exact differential equations involving integration, differentiation, and substitution to find the function F(y, t).
π Example: Solve 2yt dy + yΒ² dt = 0. M = 2yt, N = yΒ². Step I: F(y,t) = β«2yt dy + Ο(t) = yΒ²t + Ο(t). Step II: βF/βt = yΒ² + Ο'(t) = N = yΒ², so Ο'(t)=0. Step III: Ο(t)=k. Step IV: F(y,t) = yΒ²t + k = c_F, so yΒ²t = c'. Therefore, the general solution is y(t) = c/βt.
TOPIC 111: EXACT DIFFERENTIAL EQUATIONS: INTEGRATING FACTOR
If the exactness test fails, the equation is an Inexact Differential Equation: (M)dy + (N)dt = 0, where βM/βt β βN/βy. To make it exact, we multiply the equation by an Integrating Factor (F_Int) . This changes the values of M and N while maintaining the equality. The integrating factor converts the left-hand side of the differential equation into an exact differential d{F(y, t)}.
Integrating factors can be found using two methods: I β Integrating Factor by Trial & Error Method: Experiment with different values (e.g., y, t, yΒ², tΒ², etc.) and select the one that makes the exactness test valid. II β Integrating Factor by Formula: Use two rules:
- Rule 1: If (1/N)(βM/βt - βN/βy) = f(y) alone, then F_Int = e^(β«f(y)dy) .
- Rule 2: If (1/M)(βN/βy - βM/βt) = g(t) alone, then F_Int = e^(β«g(t)dt) .
π Definition β Inexact Differential Equation: A differential equation of the form (M)dy + (N)dt = 0 that does not satisfy the exactness test βM/βt = βN/βy.
π Definition β Integrating Factor (F_Int): A multiplicative factor that converts an inexact differential equation into an exact differential equation, making it integrable.
π Formula (Rule 1): F_Int = e^(β«f(y)dy) β where f(y) = (1/N)(βM/βt - βN/βy) π Formula (Rule 2): F_Int = e^(β«g(t)dt) β where g(t) = (1/M)(βN/βy - βM/βt)
π Example 1 (Trial & Error): Given 2t dy + y dt = 0, M = 2t, N = y. Exactness test: βM/βt = 2, βN/βy = 1, so 2 β 1 (inexact). Multiply by y: (y)(2t dy + y dt) = 2yt dy + yΒ² dt = 0. Now M = 2yt, N = yΒ². Exactness test: βM/βt = 2y, βN/βy = 2y, so 2y = 2y (exact). Therefore, the integrating factor is F_Int = y.
π Example 2 (Formula): Given 5yt dy + (5yΒ² + 8t) dt = 0, M = 5yt, N = 5yΒ² + 8t. Exactness test: βM/βt = 5y, βN/βy = 10y, so 5y β 10y (inexact). Apply Rule 1: (1/N)(βM/βt - βN/βy) = (1/(5yΒ²+8t))(5y - 10y) = -5y/(5yΒ²+8t) β f(y) alone. Apply Rule 2: (1/M)(βN/βy - βM/βt) = (1/(5yt))(10y - 5y) = (5y)/(5yt) = 1/t = g(t) alone. Therefore, the integrating factor is F_Int = e^(β«(1/t)dt) = e^(ln|t|) = t.
π‘ Why this matters: Once the integrating factor converts the inexact equation into an exact one, the 4-step procedure can be applied to find the solution, making a wide range of otherwise unsolvable differential equations integrable.
β Key Takeaways
This lecture establishes that first-order differential equations with variable coefficients can be homogeneous (w(t)=0) or non-homogeneous (w(t)β 0), each with distinct solution formulas. The homogeneous case yields a solution of the form y(t) = Ae^(-β«u dt), while the non-homogeneous case requires y(t) = e^(-β«u dt){A + wβ«e^(β«u dt) dt}. For nonlinear differential equations, the exact differential equation method is introduced, where the critical exactness test βM/βt = βN/βy determines if an equation is exact. The 4-step solution procedure systematically solves exact differential equations by integrating M, differentiating with respect to t, and substituting to find the implicit solution. Finally, when the exactness test fails, integrating factors found through trial-and-error or formula methods (Rule 1 for f(y) or Rule 2 for g(t)) can convert inexact equations into exact ones, after which the standard solution procedure applies.
π§ Quick Revision Questions
- What is the general solution formula for a first-order homogeneous differential equation with variable coefficients, and how is it derived?
- For the non-homogeneous case dy/dt + 2ty = t, what is the general solution and how is the constant 1/2 obtained?
- What is the exactness test for an exact differential equation, and which theorem justifies it?
- Describe the 4-step procedure for solving an exact differential equation, using the example 2yt dy + yΒ² dt = 0.
- What are the two formula-based rules for finding an integrating factor, and when should each be applied?
π Lecture 26 β Economic Applications of Exact Differential Equations
π Overview: This lecture demonstrates how exact differential equations are applied to model key economic functions, including production functions, utility functions, and demand functions. It also introduces the separable variables method for solving non-linear differential equations and applies it to model capital dynamics over time.
ποΈ Topics Covered
The lecture covers four main applications: first, using exact differential equations to derive a Cobb-Douglas production function from given marginal products; second, using integrating factors to convert an inexact differential equation into an exact one for deriving a utility function; third, deriving a demand function from point elasticity using exact differential equations; and finally, introducing separable variables for solving non-linear differential equations, with an application to the dynamics of capital stock.
π Lecture Summary
TOPIC 112: PRODUCTION FUNCTION USING EXACT DIFFERENTIAL EQUATIONS
A firm uses L workers and K machines as inputs. The marginal products are given as MPβ = 2(L/K)^(2/3) and MPβ = 4(K/L)^(1/3). We must express the total product function assuming the firm stays on the same isoquant, and identify the type of production function.
The total differential of the production function Q(K,L) = k is dQ = 0, which gives (MPβ)dK + (MPβ)dL = 0. This yields the equation: {2(L/K)^(2/3)} dK + {4(K/L)^(1/3)} dL = 0.
π Definition β Exact Differential Equation: A differential equation M dy + N dt = 0 is exact if βM/βt = βN/βy. Here, M = 2(L/K)^(2/3), N = 4(K/L)^(1/3), dy = dK, and dt = dL.
Exactness Test: βM/βL = β/βL [2(L/K)^(2/3)] = 2(1/K)^(2/3) * (2/3)L^(-1/3) = (4/3)(1/K)^(2/3)L^(-1/3) βN/βK = β/βK [4(K/L)^(1/3)] = 4(1/L)^(1/3) * (1/3)K^(-2/3) = (4/3)(1/L)^(1/3)K^(-2/3) Both equal (4/3)(1/K)^(2/3)(1/L)^(1/3), so the equation is exact.
Solution (4-Step Procedure): Step I: Write Q(K,L) = β« M dK + Ο(L). Q(K,L) = β« 2(L/K)^(2/3) dK + Ο(L) = 2L^(2/3) β« K^(-2/3) dK + Ο(L) = 2L^(2/3) * (K^(1/3))/(1/3) + Ο(L) = 6L^(2/3)K^(1/3) + Ο(L).
Step II: Differentiate w.r.t L and set equal to N. βQ/βL = β/βL [6L^(2/3)K^(1/3) + Ο(L)] = 6K^(1/3)*(2/3)L^(-1/3) + Ο'(L) = 4K^(1/3)L^(-1/3) + Ο'(L). Since βQ/βL = N = 4(K/L)^(1/3) = 4K^(1/3)L^(-1/3), we get 4K^(1/3)L^(-1/3) + Ο'(L) = 4K^(1/3)L^(-1/3), so Ο'(L) = 0.
Step III: Integrate Ο'(L) to find Ο(L). Ο(L) = β« 0 dL = k (a constant).
Step IV: Substitute into Step I. Q(K,L) = 6L^(2/3)K^(1/3) + k. Since dQ = 0 implies Q is constant, we set Q(K,L) = c_Q, so c_Q = 6L^(2/3)K^(1/3) + k, which gives 6L^(2/3)K^(1/3) = c, where c = c_Q β k.
π Definition β Cobb-Douglas Production Function: A production function of the form Q = A K^Ξ± L^Ξ², where A is a constant and Ξ±, Ξ² are output elasticities.
The solution Q(K,L) = 6K^(1/3)L^(2/3) represents a Cobb-Douglas production function with constant returns to scale (sum of exponents = 1). The constant k must equal 0 to make economic sense, as output should be zero when either input is zero.
π Formula: Q(K,L) = 6 K^(1/3) L^(2/3) π Example: If K=8 and L=27, then Q = 6 * (8)^(1/3) * (27)^(2/3) = 6 * 2 * 9 = 108 units of output.
π‘ Why this matters: The solution demonstrates that exact differential equations can recover the underlying production function from its marginal products, confirming it is Cobb-Douglas.
TOPIC 113: UTILITY FUNCTION USING EXACT DIFFERENTIAL EQUATIONS
A consumer's utility function for two goods x and y is given by the differential equation 4xy dx + xΒ² dy = 0. We must express the total utility function using integrating factors.
Comparing with standard form: M = 4xy, N = xΒ², with dy = dx and dt = dy.
Exactness Test: βM/βy = β/βy(4xy) = 4x βN/βx = β/βx(xΒ²) = 2x Since 4x β 2x, the equation is inexact.
π Definition β Integrating Factor: A function F_int that, when multiplied by an inexact differential equation, makes it exact.
Applying Rule 1: (1/N)(βM/βy β βN/βx) = (1/xΒ²)(4x β 2x) = (1/xΒ²)(2x) = 2/x = f(x) (function of x only). The integrating factor is F_int = e^(β« f(x) dx) = e^(β« (2/x) dx) = e^(2 ln|x|) = xΒ².
Multiplying the equation by xΒ² gives: 4xΒ³y dx + xβ΄ dy = 0. Now M = 4xΒ³y and N = xβ΄. Exactness Test: βM/βy = 4xΒ³, βN/βx = 4xΒ³. The equation is now exact.
Solution (4-Step Procedure): Step I: U(x,y) = β« M dx + Ο(y) = β« 4xΒ³y dx + Ο(y) = xβ΄y + Ο(y).
Step II: βU/βy = xβ΄ + Ο'(y). Since βU/βy = N = xβ΄, we get Ο'(y) = 0.
Step III: Ο(y) = β« 0 dy = k.
Step IV: U(x,y) = xβ΄y + k. Setting U = c_U gives xβ΄y = c.
π Formula: U(x,y) = xβ΄y β c (where c is absorbed constant) π Example: If a consumer consumes x=2 units and y=5 units, utility is U = 2β΄ * 5 = 16 * 5 = 80 utils.
π‘ Why this matters: This shows how integrating factors convert a non-exact utility differential equation into an exact one, allowing recovery of the underlying utility function.
TOPIC 114: POINT ELASTICITY FORMULA USING EXACT DIFFERENTIAL EQUATIONS
A firm faces point elasticity of demand E_d = -2. Use exact differential equations to find the demand function.
From the elasticity formula: (dQ_d/dP) * (P/Q_d) = -2, which rearranges to (1/Q_d) dQ_d + (2/P) dP = 0.
Comparing with standard form: M = 1/Q_d, N = 2/P, with dy = dQ_d and dt = dP.
Exactness Test: βM/βP = β/βP (1/Q_d) = 0 βN/βQ_d = β/βQ_d (2/P) = 0 The equation is exact.
Solution (4-Step Procedure): Step I: F(Q_d, P) = β« M dQ_d + Ο(P) = β« (1/Q_d) dQ_d + Ο(P) = ln|Q_d| + Ο(P).
Step II: βF/βP = Ο'(P). Since βF/βP = N = 2/P, we get Ο'(P) = 2/P.
Step III: Ο(P) = β« (2/P) dP = 2 ln|P| + cβ.
Step IV: F(Q_d, P) = ln|Q_d| + 2 ln|P| + cβ. Setting F = c_D gives ln|Q_d * PΒ²| = cβ, so Q_d * PΒ² = c, or Q_d = c/PΒ².
π Formula: Q_d = c / PΒ² π Example: If the constant c = 100 and price P = 5, quantity demanded is Q_d = 100/25 = 4 units.
π‘ Why this matters: This demonstrates how point elasticity information can be used with exact differential equations to derive the functional form of the demand curve.
TOPIC 115: NON-LINEAR DIFFERENTIAL EQUATION: SEPARABLE VARIABLES
π Definition β Separable Variables: A differential equation f(y,t) dy + g(y,t) dt = 0 is separable if it can be written as f(y) dy + g(t) dt = 0, where y and t are separated.
Example #1: Solve 3yΒ² dy β t dt = 0. Rearranged: 3yΒ² dy = t dt. Integrating: β« 3yΒ² dy = β« t dt β yΒ³ + cβ = tΒ²/2 + cβ β yΒ³ = tΒ²/2 + c' β y = (tΒ²/2 + c')^(1/3).
Example #2: Solve 2t dy + y dt = 0. Rearranged: 2t dy = -y dt β dy/y = -(1/2)(dt/t). Integrating: ln|y| = -(1/2) ln|t| + c β ln|y| + ln|t^(1/2)| = c β ln|y * t^(1/2)| = c β y = c * t^(-1/2).
π Formula: For separable equations, integrate both sides: β« f(y) dy = -β« g(t) dt π Example: For 2t dy + y dt = 0 with initial condition y(1)=4, the solution is y = 4/βt.
TOPIC 116: DYNAMICS OF CAPITAL USING SEPARABLE VARIABLES METHOD
Given: X = βK βL (Cobb-Douglas production), dK/dt = 0.4X (investment proportional to output), L = e^(0.04t) (exponential labor growth). Derive a differential equation for K(t) and solve given K(0) = 10,000.
Substituting X and L into dK/dt: dK/dt = 0.4 * βK * β(e^(0.04t)) = 0.4 * βK * e^(0.02t)
Rearranging for separation of variables: K^(-1/2) dK = 0.4 e^(0.02t) dt
Integrating both sides: β« K^(-1/2) dK = β« 0.4 e^(0.02t) dt 2K^(1/2) = (0.4/0.02) e^(0.02t) + c = 20 e^(0.02t) + c βK(t) = 10 e^(0.02t) + cβ
Applying initial condition K(0) = 10,000: β10000 = 10 eβ° + cβ β 100 = 10 + cβ β cβ = 90
Solution: βK(t) = 10 e^(0.02t) + 90, so K(t) = [10(e^(0.02t) + 9)]Β² = 100(e^(0.02t) + 9)Β²
π Formula: K(t) = 100(e^(0.02t) + 9)Β² π Example: At t=0, K(0) = 100(1+9)Β² = 100(100) = 10,000. At t=50, K(50) = 100(eΒΉ + 9)Β² = 100(2.718 + 9)Β² β 100(11.718)Β² β 13,732.
π‘ Why this matters: This example shows how separable variables solve a non-linear differential equation modeling capital accumulation over time, incorporating production technology and labor growth.
β Key Takeaways
The lecture demonstrates four critical economic applications of differential equations. First, exact differential equations can recover a Cobb-Douglas production function from its marginal products, with the 4-step procedure verifying exactness and yielding Q = 6K^(1/3)L^(2/3). Second, inexact differential equations require integrating factors (such as xΒ² for utility functions) to become exact, allowing recovery of utility functions. Third, point elasticity information can directly derive demand functions in the form Q_d = c/PΒ² using exact differential equations. Finally, separable variables provide a straightforward method for solving non-linear differential equations, powerfully applied to model the time-path of capital stock K(t) = 100(e^(0.02t) + 9)Β² under Cobb-Douglas production and exponential labor growth.
π§ Quick Revision Questions
- What are the two conditions that must be verified to determine if a differential equation M dy + N dt = 0 is exact, and how is the exactness test performed?
- In Topic 112, why must the constant k be set to zero in the production function solution, and what economic paradox would arise otherwise?
- How do you determine the integrating factor for an inexact differential equation, and what was the integrating factor used in Topic 113?
- What is the key characteristic of a separable differential equation, and how does the solution method differ from the 4-step procedure used for exact equations?
- In the capital dynamics problem, explain how the production function, investment equation, and labor growth function combine to form a single separable differential equation for capital.