๐ Lecture 99 โ Related Topic of Conservative Force Fields
๐ Overview: This lecture derives the conservation of energy theorem for a particle moving in a conservative force field, showing that total mechanical energy remains constant. It then explores how conservative systems allow for closed orbits, such as planetary motion around the Sun.
๐๏ธ Topics Covered
The lecture begins by deriving the work-energy theorem for a particle under a general force, expressing work as the change in kinetic energy. It then introduces the conservative force condition, rewriting work as the negative change in potential energy. Equating both expressions yields the conservation of total mechanical energy. The second part discusses how a constant total energy in a conservative system permits closed trajectories, with Earth's orbit as a key example.
๐ Lecture Summary
Conservation of Energy Theorem in Case of Conservative Force Field
The work-energy theorem is derived first. The total work ( W ) done by the total force ( \vec{F} ) on a particle moving from point ( P_1 ) to ( P_2 ) equals the change in kinetic energy:
[ W = \int_{P_1}^{P_2} \vec{F} \cdot d\vec{r} = T_2 - T_1 ]
where ( T = \frac{1}{2} m v^2 ) is the kinetic energy. If the force is conservative, it can be expressed as ( \vec{F} = -\nabla V ), where ( V ) is the potential energy. Then:
[ W = \int_{P_1}^{P_2} (-\nabla V) \cdot d\vec{r} = V_1 - V_2 ]
Equating the two expressions for work gives:
[ T_2 - T_1 = V_1 - V_2 \quad \Rightarrow \quad T_1 + V_1 = T_2 + V_2 ]
This shows that the quantity ( T + V ) is a constant of motion, called the total energy ( E ):
[ E = T + V = \frac{1}{2} m v^2 + V ]
๐ Definition โ Conservative Force Field: A force field where the work done on a particle moving between two points is independent of the path and can be expressed as the negative gradient of a scalar potential function. ๐ Formula: ( E = T + V = \frac{1}{2} m v^2 + V ) โ Total mechanical energy is the sum of kinetic and potential energies and is constant for a particle in a conservative field. ๐ Example: A ball thrown vertically upward: at the start, kinetic energy is high and potential energy is low; at the peak, kinetic energy is zero and potential energy is maximum. The sum remains constant if air resistance is ignored.
Conservative Systems and Orbits of Particles
A single particle moving in a conservative field may exhibit a specific type of motion where the total energy ( E ) is constant:
[ \frac{1}{2} m \dot{\vec{r}}^2 + V(\vec{r}) = E ]
If the particle returns to the same position vector ( \vec{r}_0 ) at a later time, it must have the same kinetic energy and therefore the same speed. This implies that closed trajectories are possible in a conservative system. This principle is fundamental to understanding Earth's motion about the Sun.
๐ Definition โ Closed Trajectory: A path in space that a particle follows which returns to its starting point after a finite time, such as a planet's orbit. ๐ก Why this matters: The possibility of closed orbits under a conservative central force (like gravity) explains why planets have stable, repeating paths around the Sun.
โญ Key Takeaways
The conservation of mechanical energy theorem is derived by equating the work done by a conservative force (negative change in potential energy) to the change in kinetic energy, yielding the constant total energy ( E = T + V ). In a conservative system, a particle with constant total energy can follow closed orbits because returning to the same position implies the same kinetic energy and speed. This principle directly explains stable planetary orbits, such as Earth's orbit around the Sun, under a conservative gravitational force.
๐ง Quick Revision Questions
- Starting from the definition of work, show how the expression ( W = T_2 - T_1 ) is derived for a single particle.
- For a conservative force, how is work expressed in terms of potential energy at two points?
- Write the mathematical statement of conservation of total mechanical energy for a particle in a conservative field.
- Explain why a particle in a conservative system with constant total energy can have a closed trajectory.
- Give one physical example where the principle of closed orbits in a conservative field applies.
๐ Lecture 100 โ Non-Conservative Force Field
๐ Overview: This lecture defines and characterizes non-conservative forcesโforces that cannot be derived from a potential energy function and do not conserve mechanical energy. It introduces the mathematical criterion for a non-conservative force field (the curl of the force is non-zero) and establishes the work-energy relation for systems where both conservative and non-conservative forces act, showing that non-conservative forces like friction are dissipative and reduce total mechanical energy.
๐๏ธ Topics Covered
The lecture defines non-conservative forces as those that cannot be expressed as the negative gradient of a scalar potential function and gives examples such as friction and time-dependent impulse forces. It demonstrates the non-conservative nature of a force proportional to velocity (F = kv) by showing its line integral is non-zero. Finally, it derives and analyzes the work-energy relation for a system where the total force is split into conservative and non-conservative parts, leading to the result that the work done by non-conservative forces equals the change in total mechanical energy of the system.
๐ Lecture Summary
Non-Conservative Force Field
Forces that cannot be expressed in terms of a potential energy function (i.e., there is no scalar function V such that F = โโV) are called non-conservative forces. They are also referred to as dissipative forces because they do not store energy.
๐ Definition โ Non-Conservative Force: A force field F is non-conservative if it cannot be derived from a scalar potential function, or equivalently, if its curl is not zero (โ ร F โ 0). Forces that do not store energy are called non-conservative or dissipative forces.
๐ Example โ Friction: Friction is a non-conservative force. It is always opposed to the direction of motion and is not a single-valued function of position alone. Similarly, an impulse (a time-dependent force) is non-conservative and cannot be derived from a scalar point function.
๐ Example โ Proof using F = kv: For a force F = kv, where v is the velocity of the particle:
โฎ ๐
ยท d๐ซ = โซ_{tโ}^{tโ} ๐
ยท (d๐ซ/dt) dt = โซ_{tโ}^{tโ} ๐
ยท ๐ฏ dt = k โซ_{tโ}^{tโ} vยฒ dt > 0
The line integral is not equal to zero, proving the force is non-conservative.
Work-Energy relation and Non-conservative Forces
For any general force F, the work done is equal to the change in kinetic energy:
W = โซ_{Pโ}^{Pโ} ๐
ยท d๐ซ = Tโ โ Tโ
When the force F can be broken into conservative F^(c) and non-conservative F^(nc) parts:
๐
= ๐
^(c) + ๐
^(nc)
the work-energy relation becomes:
โซ_{Pโ}^{Pโ} ๐
^(c) ยท d๐ซ + โซ_{Pโ}^{Pโ} ๐
^(nc) ยท d๐ซ = Tโ โ Tโ (1)
Since F^(c) = โโV, equation (1) can be transformed to express the conservation of total mechanical energy adjusted for non-conservative work.
The result shows that the total mechanical energy (T + V) is not conserved in the presence of non-conservative forces. The work done by these forces accounts for the change in mechanical energy.
๐ Formula: Generalized Work-Energy Relation
Vโ โ Vโ + โซ_{Pโ}^{Pโ} ๐
^(nc) ยท d๐ซ = Tโ โ Tโ
This can be rearranged to:
Tโ + Vโ + โซ_{Pโ}^{Pโ} ๐
^(nc) ยท d๐ซ = Tโ + Vโ (2)
๐ Example โ Friction is Dissipative: The work done in overcoming friction is always negative because the non-conservative friction force (F^(nc)) is opposite to the displacement. Therefore, relation (2) proves that the influence of friction is dissipative and decreases the total mechanical energy of the system.
The work-energy relation can also be expressed as the change in total mechanical energy:
(Vโ โ Vโ) + (Tโ โ Tโ) = โซ_{Pโ}^{Pโ} ๐
^(nc) ยท d๐ซ
or more compactly:
ฮ(V + T) = โซ_{Pโ}^{Pโ} ๐
^(nc) ยท d๐ซ
๐ก Why this matters: The process in which work is converted into internal energy (due to friction) is irreversible.
โญ Key Takeaways
A force is non-conservative if it cannot be derived from a potential energy function or if its curl is non-zero (โ ร F โ 0). Friction and time-dependent impulse forces are classic examples of non-conservative forces. The work done by a non-conservative force depends on the path taken, not just the initial and final positions. In the work-energy relation for a system with both conservative and non-conservative forces, the total mechanical energy is not conserved; the work done by non-conservative forces equals the change in total mechanical energy. Non-conservative forces are dissipative, meaning they convert mechanical energy into internal energy in an irreversible process.
๐ง Quick Revision Questions
- What is the mathematical condition that a force field must satisfy to be classified as non-conservative?
- Give two examples of non-conservative forces mentioned in the lecture.
- How does the work-energy relation for a system with both conservative and non-conservative forces differ from that for a purely conservative system?
- In the example of a non-conservative force F = kv, why is the line integral always greater than zero?
- What does it mean that the influence of friction is "dissipative" and the process is "irreversible"?