📘 Lecture 54 — Verification of Divergence Theorem by an Example
📖 Overview: This lecture demonstrates the practical application and verification of the divergence theorem through a detailed worked example. It shows how the volume integral of the divergence of a vector field equals the surface integral of that field over the bounding surface, providing a concrete numerical verification.
🗂️ Topics Covered
The lecture presents a complete problem statement for verifying the divergence theorem for a given vector field over a cylindrical region. It involves calculating the volume integral of the divergence over the cylinder, then computing the surface integral separately over three distinct surfaces (base, top, and convex portion), and finally showing they yield the same result.
📝 Lecture Summary
Problem Statement
The lecture verifies the divergence theorem for the vector field A⃗ = 4xî — 2y²ĵ + z²k̂ taken over the region bounded by x² + y² = 4, z = 0, and z = 3. This creates a cylinder of radius 2 and height 3.
🔑 Divergence Theorem: ∮_S A⃗ · n̂ dS = ∭_V ∇·A⃗ dV — the flux of a vector field through a closed surface equals the volume integral of its divergence over the enclosed region.
Volume Integral Calculation
The divergence is computed first: ∇·A⃗ = ∂(4x)/∂x + ∂(-2y²)/∂y + ∂(z²)/∂z = 4 — 4y + 2z
The volume integral is set up over the cylinder: ∭V (4 — 4y + 2z) dV = ∫{x=-2}^{2} ∫{y=-√(4-x²)}^{√(4-x²)} ∫{z=0}^{3} (4 — 4y + 2z) dz dy dx
The limits come from the cylinder equation x² + y² = 4.
Surface Integral Decomposition
The surface S of the cylinder consists of three parts:
- S₁: The base at z = 0
- S₂: The top at z = 3
- S₃: The convex portion (x² + y² = 4)
Total Surface Integral = ∮_S₁ A⃗ · n̂ dS₁ + ∮_S₂ A⃗ · n̂ dS₂ + ∮_S₃ A⃗ · n̂ dS₃
Surface S₁ (Base, z = 0)
On the base, n̂ = -k̂ and A⃗ = 4xî — 2y²ĵ Therefore A⃗ · n̂ = (4xî — 2y²ĵ) · (-k̂) = 0 ⟹ ∮_S₁ A⃗ · n̂ dS₁ = 0
Surface S₂ (Top, z = 3)
On the top, n̂ = k̂ and A⃗ = 4xî — 2y²ĵ + 9k̂ Therefore A⃗ · n̂ = (4xî — 2y²ĵ + 9k̂) · (k̂) = 9 ⟹ ∮_S₂ A⃗ · n̂ dS₂ = 9 × (Area of top) = 9(4π) = 36π
📐 Formula: Area of cylinder base = πr² = π(2²) = 4π (since x² + y² = 4 gives radius r = 2)
Surface S₃ (Convex Surface, x² + y² = 4)
A perpendicular to x² + y² = 4 has direction ∇(x² + y²) = 2xî + 2yĵ Unit normal n̂ = (2xî + 2yĵ) / √(4x² + 4y²) = (xî + yĵ) / 2
A⃗ · n̂ = (4xî — 2y²ĵ + z²k̂) · ((xî + yĵ)/2) = 2x² — y³
Using cylindrical coordinates: x = 2 cos θ, y = 2 sin θ, dS₃ = 2 dθ dz ∮S₃ (2x² — y³) dS₃ = ∫{θ=0}^{2π} ∫_{z=0}^{3} [2(2 cos θ)² — (2 sin θ)³] 2 dz dθ = ∫_0^{2π} 48 cos² θ — 48 sin³ θ dθ = 48π
Final Verification
Total Surface Integral = 0 + 36π + 48π = 84π
Total Volume Integral = 84π (matching the surface integral)
💡 Why this matters: The agreement of both integrals verifies the divergence theorem and confirms the consistency of the mathematical framework.
⭐ Key Takeaways
The divergence theorem transforms a closed surface flux integral into a volume integral of the divergence, and this example proves they yield identical results. The cylinder's surface must be decomposed into its three distinct parts (base, top, and convex side) when computing the surface integral directly. Cylindrical coordinates simplify the computation on the convex surface by converting x and y into trigonometric functions. The divergence calculation is straightforward — take partial derivatives of each component. The final result of 84π confirms that both volume and surface integral approaches are equivalent, validating the theorem.
🧠 Quick Revision Questions
- What are the three distinct surfaces of the cylinder used in the surface integral decomposition?
- Why does the contribution from surface S₁ (the base) equal zero?
- What coordinate transformation simplifies the calculation on the convex surface S₃?
- What is the value of the volume integral for this problem?
- Explain why the unit normal on the convex surface has direction (xî + yĵ)/2 rather than just the vertical direction.
📘 Lecture 55 — Another Example: Divergence Theorem
📖 Overview: This lecture demonstrates a complete worked example of applying the divergence theorem. It shows how to evaluate a surface integral by transforming it into a simpler volume integral, specifically for a vector field over a cubic region. This matters because the divergence theorem is a powerful tool that simplifies complex surface integral computations.
🗂️ Topics Covered
The lecture presents a full problem statement involving the evaluation of a surface integral over a cube. It then applies the divergence theorem to convert the surface integral into a volume integral. The solution includes computing the divergence of the given vector field, setting up the triple integral over the cube's limits, and performing the step-by-step integration to obtain the final numerical answer.
📝 Lecture Summary
Problem Statement
The problem is to evaluate the surface integral ∬ F · n̂ dV over the surface S of the cube bounded by x = 0, x = 1, y = 0, y = 1, z = 0, z = 1, where the vector field F = 4xz î — y² ĵ + yz k̂.
Solution
By the divergence theorem, the required integral is equal to ∭ ∇ · F dV over the region R.
First, compute the divergence of F: ∇ · F = ∇ · (4xz î — y² ĵ + yz k̂) = ∂(4xz)/∂x — ∂(y²)/∂y + ∂(yz)/∂z = 4z — 2y + y = 4z — y
Next, set up the volume integral: ∭ ∇ · F dV = ∭ (4z — y) dV R
With the limits from the cube: x from 0 to 1, y from 0 to 1, z from 0 to 1, the triple integral becomes: ∫₀¹ ∫₀¹ ∫₀¹ (4z — y) dz dy dx
Integrate with respect to z first: = ∫₀¹ ∫₀¹ [2z² — yz] (from z=0 to z=1) dy dx = ∫₀¹ ∫₀¹ (2*(1)² — y(1)) — (0 — 0) dy dx = ∫₀¹ ∫₀¹ (2 — y) dy dx
Now integrate with respect to y: = ∫₀¹ [2y — y²/2] (from y=0 to y=1) dx = ∫₀¹ (2*(1) — (1)²/2) — (0 — 0) dx = ∫₀¹ (2 — 1/2) dx = ∫₀¹ (3/2) dx
Finally, integrate with respect to x: = (3/2) [x] (from x=0 to x=1) = (3/2) (1 — 0) = 3/2
🔑 Definition — Divergence Theorem: The surface integral of a vector field F over a closed surface S is equal to the volume integral of the divergence of F over the region R enclosed by S. 📐 Formula: ∬ F · n̂ dS = ∭ ∇ · F dV 📌 Example: For F = 4xz î — y² ĵ + yz k̂ over the unit cube, the surface integral was transformed into ∭ (4z — y) dV, which was evaluated step-by-step to give 3/2.
💡 Why this matters: The divergence theorem converts a potentially difficult surface integral into an easier volume integral. In this example, computing the surface integral directly would require evaluating six separate surface integrals (one for each face of the cube). The volume integral required only one triple integration.
⭐ Key Takeaways
The divergence theorem transforms surface integrals over closed surfaces into volume integrals, which are often simpler to compute. For this problem, the divergence of F was 4z — y, which is much simpler than the original vector field components. The triple integral over the cube was evaluated by integrating first with respect to z, then y, then x, each time applying the limits from the cube's faces. The final answer was 3/2. The theorem requires computing the divergence correctly — note that the negative sign in front of y² was correctly handled in the partial derivative of —y² with respect to y.
🧠 Quick Revision Questions
- What is the statement of the divergence theorem?
- How was the divergence of F = 4xz î — y² ĵ + yz k̂ computed?
- What were the limits of integration for the triple integral in this cube problem?
- Why was the order of integration z, y, x chosen rather than another order?
- What is the final numerical value of the surface integral in this example?
📘 Lecture 56 — Further Example 1 of Divergence Theorem
📖 Overview: This lecture presents a proof of an important vector identity using the Divergence Theorem. By substituting a specific vector field into the theorem, the identity (\int_V \nabla \phi , dV = \int_S \phi \hat{n} , dS) is derived. This demonstrates the power of the Divergence Theorem in proving fundamental relationships between volume and surface integrals.
🗂️ Topics Covered
The lecture begins by stating the problem: prove the vector identity involving the gradient of a scalar function over a volume and the scalar function over a surface. It then provides a complete proof by substituting a special vector field (\vec{A} = \phi \vec{C}) into the Divergence Theorem, where (\vec{C}) is a constant vector. Using vector algebra and the fact that (\vec{C}) is arbitrary, the desired identity is extracted.
📝 Lecture Summary
Problem Statement
Prove the identity
[
\int_V \nabla \phi , dV = \int_S \phi \hat{n} , dS
]
Proof
In the divergence theorem, let (\vec{A} = \phi \vec{C}) where (\vec{C}) is a constant vector. Then
[
\int_V \nabla \cdot (\phi \vec{C}) , dV = \int_S (\phi \vec{C}) \cdot \hat{n} , dS
]
🔑 Definition — (\nabla \cdot (\phi \vec{C})): The divergence of a scalar times a vector. Using the product rule: (\nabla \cdot (\phi \vec{C}) = (\nabla \phi) \cdot \vec{C} = \vec{C} \cdot \nabla \phi)
Since ((\phi \vec{C}) \cdot \hat{n} = \vec{C} \cdot (\phi \hat{n})), substituting these values in the above integral gives:
[
\int_V \vec{C} \cdot \nabla \phi , dV = \int_S \vec{C} \cdot (\phi \hat{n}) , dS
]
Taking (\vec{C}) outside the integrals,
[
\vec{C} \cdot \int_V \nabla \phi , dV = \vec{C} \cdot \int_S (\phi \hat{n}) , dS
]
and since (\vec{C}) is an arbitrary constant vector,
[
\int_V \nabla \phi , dV = \int_S (\phi \hat{n}) , dS
]
Hence the result.
📐 Formula: (\int_V \nabla \phi , dV = \int_S \phi \hat{n} , dS)
→ The volume integral of the gradient of a scalar function equals the surface integral of the scalar function times the outward unit normal.
💡 Why this matters: This identity allows converting a volume integral of a gradient into a surface integral, which is often easier to compute. It is a direct consequence of the Divergence Theorem and is widely used in fluid dynamics, electromagnetism, and potential theory.
⭐ Key Takeaways
The most critical point is the proof technique: substituting (\vec{A} = \phi \vec{C}) (with (\vec{C}) constant) into the Divergence Theorem and then factoring out the constant vector (\vec{C}) allows extraction of the desired identity. Since (\vec{C}) is arbitrary, the integrals themselves must be equal. This method is a standard trick for deriving vector identities from the Divergence Theorem. The final identity (\int_V \nabla \phi , dV = \int_S \phi \hat{n} , dS) relates the volume integral of a gradient to a surface integral, and it is essential to remember that (\hat{n}) is the outward unit normal.
🧠 Quick Revision Questions
- What special vector field (\vec{A}) is substituted into the Divergence Theorem to prove the identity?
- Why can the constant vector (\vec{C}) be taken outside the integrals?
- Write the full divergence theorem for the vector field (\vec{A} = \phi \vec{C}).
- What is the significance of (\vec{C}) being an arbitrary constant vector in the final step of the proof?
- State the final identity proven in this lecture.
📘 Lecture 57 — Further Example 2 of Divergence Theorem
📖 Overview: This lecture demonstrates a second detailed application of the divergence theorem, this time in the context of fluid dynamics. It proves that for a fluid with no sources or sinks, the continuity equation ∇·J + ∂ρ/∂t = 0 must hold, linking the concepts of mass conservation, flux, and the divergence theorem.
🗂️ Topics Covered
The lecture begins by considering a fluid of density ρ moving with velocity v within an arbitrary volume V. It derives the time rate of change of mass inside the volume using a volume integral. It then calculates the mass flux leaving the volume per second through the surface using a surface integral. The divergence theorem is applied to convert the surface integral to a volume integral. By equating the rate of increase of mass to the negative of the mass leaving the volume, the integral form of the continuity equation is obtained. Using a proof by contradiction based on the continuity of derivatives, the integrand is shown to be identically zero, yielding the differential continuity equation. Finally, special cases and analogous applications in electromagnetism are discussed.
📝 Lecture Summary
Proving ∇·J + ∂ρ/∂t = 0
The lecture begins by considering an arbitrary surface enclosing a volume V of fluid. At any time, the mass of fluid within V is given by M = ∫∫∫_V ρ dV. The time rate of increase of this mass is ∂M/∂t = ∂/∂t ∫∫∫_V ρ dV = ∫∫∫_V ∂ρ/∂t dV.
Next, the flow of fluid across the surface is analyzed. Let v be the velocity of the fluid at any point. The volume of fluid crossing an infinitesimal surface element dS in time Δt is equal to the volume of a cylinder with base dS and slant height vΔt. This volume is (vΔt)·n̂ dS = v·n̂ dS Δt. Therefore, the volume per second of fluid crossing dS is v·n̂ dS. The mass of fluid per unit time leaving V through the entire surface S is then the surface integral ∫∫_S ρv·n̂ dS.
🔑 Definition — Divergence Theorem: For a vector field F, the flux of F through a closed surface S equals the volume integral of the divergence of F over the enclosed volume V: ∫∫_S F·n̂ dS = ∫∫∫_V ∇·F dV.
📐 Formula: ∫∫_S ρv·n̂ dS = ∫∫∫_V ∇·(ρv) dV → This is a direct application of the divergence theorem to the vector field J = ρv, showing that the net mass outflow equals the integral of the divergence of the mass flux density over the volume.
Since the time rate of increase in mass inside V must equal the negative of the mass leaving V (mass is conserved, as there are no sources or sinks), we have: ∫∫∫_V ∂ρ/∂t dV = − ∫∫∫_V ∇·(ρv) dV. Rearranging gives: ∫∫∫_V [∂ρ/∂t + ∇·(ρv)] dV = 0.
To prove that the integrand itself must be zero, the lecture uses a proof by contradiction. Assume that the integrand ∂ρ/∂t + ∇·(ρv) is greater than 0 at a point P. Due to the continuity of the derivatives, it will be greater than 0 in some region A surrounding P. Then the volume integral over that region A would be positive, contradicting the fact that the integral is zero over every closed volume. A similar contradiction arises if the integrand is assumed to be less than 0. Therefore, the integrand must be identically zero.
Hence, ∇·(ρv**) + ∂ρ/∂t = 0**.
🔑 Definition — Continuity Equation: The equation ∇·(ρv) + ∂ρ/∂t = 0, which expresses the conservation of mass in a fluid flow. It states that the net rate of mass flow out of any point (the divergence of the mass flux) plus the local rate of change of density must sum to zero.
💡 Why this matters: This fundamental equation is not limited to fluid dynamics. If the fluid is incompressible, ρ is constant, making ∂ρ/∂t = 0. The continuity equation then simplifies to ∇·v = 0, meaning the velocity field is solenoidal (divergence-free). In electromagnetic theory, ρ is the charge density and J = ρv is the current density. The equation ∇·J + ∂ρ/∂t = 0 then expresses the conservation of electric charge.
⭐ Key Takeaways
The divergence theorem is a powerful tool for converting surface integrals of flux into volume integrals, enabling the derivation of fundamental conservation laws. The continuity equation ∇·(ρv) + ∂ρ/∂t = 0 is a direct mathematical statement of mass conservation for a fluid with no sources or sinks. A proof by contradiction, relying on the continuity of the integrand's derivatives, shows that if a volume integral is zero for all volumes, the integrand itself must be zero. For an incompressible fluid (constant ρ), the continuity equation simplifies to ∇·v = 0, indicating a solenoidal velocity field. The same mathematical form applies to charge conservation in electromagnetism, where J is current density and ρ is charge density.
🧠 Quick Revision Questions
- State the divergence theorem as used in this lecture.
- What is the expression for the mass of fluid in a volume V, and what is its time rate of change?
- How is the mass flow rate through a surface element dS expressed?
- Explain the key step that transforms the surface integral of mass outflow into a volume integral.
- Describe the proof-by-contradiction argument used to show that the integrand ∂ρ/∂t + ∇·(ρv) must be zero.
📘 Lecture 58 — Further Example 3 of Divergence Theorem
📖 Overview: This lecture demonstrates a specific application of the divergence theorem to prove a vector identity involving the curl of a vector field. By substituting a carefully chosen vector field expressed as a cross product with a constant vector, the proof elegantly transforms a volume integral of curl into a surface integral of a cross product. This result is important for simplifying complex vector calculations in electromagnetism and fluid dynamics.
🗂️ Topics Covered
The lecture presents a complete proof of the relation ∫ (∇ × B) dV = ∫ (n̂ × B) dS using the divergence theorem. It begins with the problem statement, then substitutes A = B × C into the divergence theorem. Using vector identities for the divergence of a cross product and the scalar triple product, the proof simplifies by factoring out the arbitrary constant vector C to obtain the final result.
📝 Lecture Summary
Problem Statement
The lecture aims to prove the vector identity: ∫_V (∇ × B) dV = ∫_S (n̂ × B) dS, where B is any vector field.
💡 Why this matters: This identity allows us to convert a volume integral of the curl of a vector field into a surface integral, which is often easier to evaluate in practical applications.
Proof
The proof begins with the divergence theorem: ∫_V ∇ · A dV = ∫_S A · n̂ dS.
Let A = B × C, where C is a constant vector. Substituting into the divergence theorem:
∫_V ∇ · (B × C) dV = ∫_S (B × C) · n̂ dS
Using the vector identity: ∇ · (B × C) = C · (∇ × B)
And the scalar triple product identity: (B × C) · n̂ = B · (C × n̂) = (C × n̂) · B = C · (n̂ × B)
The integral becomes: ∫_V C · (∇ × B) dV = ∫_S C · (n̂ × B) dS
Since C is a constant vector, we can take it outside the integrals:
C · ∫_V (∇ × B) dV = C · ∫_S (n̂ × B) dS
Since C is an arbitrary constant vector, this equality holds only if the vectors dotted with C are equal. Therefore:
∫_V (∇ × B) dV = ∫_S (n̂ × B) dS
🔑 Definition — Scalar Triple Product: The scalar triple product of three vectors a, b, and c is defined as a · (b × c) = (a × b) · c, and it represents the volume of the parallelepiped formed by the three vectors.
🔑 Definition — Arbitrary Constant Vector: A vector that can take any constant value, used in proofs to show that two vector quantities must be equal when their dot products with the arbitrary vector are equal for all possible choices of that vector.
⭐ Key Takeaways
The most critical concept from this lecture is that the divergence theorem can be extended to prove identities involving curl by cleverly choosing the vector field. The proof relies on two key vector identities: the divergence of a cross product and the scalar triple product. The use of an arbitrary constant vector C is a powerful technique to deduce vector equality from scalar equality. The final identity, ∫ (∇ × B) dV = ∫ (n̂ × B) dS, is a fundamental tool for converting between volume and surface integrals in vector calculus. This identity is frequently used in electromagnetism to relate the curl of a field inside a volume to its tangential components on the bounding surface.
🧠 Quick Revision Questions
- What is the starting point of the proof (the fundamental theorem used)?
- What vector substitution is made for A in the divergence theorem?
- What is the vector identity for ∇ · (B × C)?
- How is the term (B × C) · n̂ rewritten using the scalar triple product?
- Why can we conclude that ∫ (∇ × B) dV = ∫ (n̂ × B) dS after factoring out C?
📘 Lecture 59 — Stokes’ Theorem
📖 Overview: This lecture introduces Stokes' theorem, a fundamental result in vector calculus that relates a line integral around a simple closed curve to a surface integral of the curl of the vector field over any surface bounded by that curve. It generalizes Green's theorem to three dimensions and is essential for connecting circulation of a field to its rotational behavior across surfaces.
🗂️ Topics Covered
The lecture begins with a statement of Stokes' theorem in both mathematical and verbal forms, then proceeds to a detailed proof. The proof decomposes the vector field into components, uses projections onto coordinate planes, applies Green's theorem, and concludes by extending the validity to general surfaces by subdivision into simpler surfaces satisfying the imposed restrictions.
📝 Lecture Summary
Statement
Stokes' theorem states that if (S) is an open, two-sided surface bounded by a simple closed curve (C), then if (\vec{A}) has continuous first partial derivatives: [ \oint_C \vec{A} \cdot d\vec{r} = \iint_S (\nabla \times \vec{A}) \cdot \hat{n} , dS ] where (C) is traversed in the positive direction.
🔑 Definition — Stokes' Theorem in words: The line integral of the tangential component of a vector function (\vec{A}) taken around a simple closed curve (C) is equal to the surface integral of the normal component of the curl of (\vec{A}) taken over any surface (S) having (C) as its boundary.
Proof
If (\vec{A} = A_1 \hat{i} + A_2 \hat{j} + A_3 \hat{k}), then the theorem can be written as: [ \iint_S (\nabla \times (A_1 \hat{i} + A_2 \hat{j} + A_3 \hat{k})) \cdot \hat{n} , dS = \oint_C A_1 dx + A_2 dy + A_3 dz ]
The theorem is proved for a surface (S) whose projections on the (xy), (yz), and (zx) planes are regions bounded by simple closed curves.
[1] Assume (S) has representation (z = f(x,y)) or (x = g(y,z)) or (y = h(x,z)), where (f, g, h) are continuous and differentiable functions.
Consider first (\iint_S [\nabla \times (A_1 \hat{i})] \cdot \hat{n} , dS).
Since (\nabla \times (A_1 \hat{i}) = \begin{vmatrix} \hat{i} & \hat{j} & \hat{k} \ \frac{\partial}{\partial x} & \frac{\partial}{\partial y} & \frac{\partial}{\partial z} \ A_1 & 0 & 0 \end{vmatrix} = \frac{\partial A_1}{\partial z} \hat{j} - \frac{\partial A_1}{\partial y} \hat{k})
Therefore: [ [\nabla \times (A_1 \hat{i})] \cdot \hat{n} , dS = \left( \frac{\partial A_1}{\partial z} (\hat{n} \cdot \hat{j}) - \frac{\partial A_1}{\partial y} (\hat{n} \cdot \hat{k}) \right) dS \quad (1) ]
If (z = f(x,y)) is taken as the equation of (S), then the position vector to any point of (S) is: [ \vec{r} = x\hat{i} + y\hat{j} + z\hat{k} = x\hat{i} + y\hat{j} + f(x,y)\hat{k} ]
So that: [ \frac{\partial \vec{r}}{\partial y} = \hat{j} + \frac{\partial z}{\partial y} \hat{k} = \hat{j} + \frac{\partial f}{\partial y} \hat{k} ]
But (\frac{\partial \vec{r}}{\partial y}) is a vector tangent to S and thus perpendicular to (\hat{n}), so that: [ \hat{n} \cdot \frac{\partial \vec{r}}{\partial y} = \hat{n} \cdot \hat{j} + \frac{\partial z}{\partial y} (\hat{n} \cdot \hat{k}) = 0 ]
Or we can write: [ \hat{n} \cdot \hat{j} = -\frac{\partial z}{\partial y} (\hat{n} \cdot \hat{k}) \quad (2) ]
Substituting this value in equation (1): [ [\nabla \times (A_1 \hat{i})] \cdot \hat{n} , dS = \left( -\frac{\partial A_1}{\partial z} \frac{\partial z}{\partial y} (\hat{n} \cdot \hat{k}) - \frac{\partial A_1}{\partial y} (\hat{n} \cdot \hat{k}) \right) dS ] [ = -\left( \frac{\partial A_1}{\partial z} \frac{\partial z}{\partial y} + \frac{\partial A_1}{\partial y} \right) (\hat{n} \cdot \hat{k}) dS \quad (3) ]
Now on (S), (A_1(x,y,z) = A_1(x,y,f(x,y)) = F(x,y)) (4)
Hence (\frac{\partial A_1}{\partial z} \frac{\partial z}{\partial y} + \frac{\partial A_1}{\partial y} = \frac{\partial F}{\partial y}) and (3) becomes: [ [\nabla \times (A_1 \hat{i})] \cdot \hat{n} , dS = -\frac{\partial F}{\partial y} (\hat{n} \cdot \hat{k}) dS = -\frac{\partial F}{\partial y} dxdy ]
Then: [ \iint_S [\nabla \times (A_1 \hat{i})] \cdot \hat{n} , dS = \iint_R -\frac{\partial F}{\partial y} dxdy ]
where (R) is the projection of (S) on the (xy)-plane.
By Green's theorem in the plane, the last integral equals (\oint_\Gamma F dx) where (\Gamma) is the boundary of (R).
From equation (4), since at each point ((x,y)) of (\Gamma) the value of (F) is the same as the value of (A_1) at each point ((x,y,z)) of (C), and since (dx) is the same for both curves, we must have: [ \oint_\Gamma F dx = \oint_C A_1 dx ]
Therefore: [ \iint_S [\nabla \times (A_1 \hat{i})] \cdot \hat{n} , dS = \oint_C A_1 dx \quad (5) ]
Similarly, by projections on the other coordinate planes: [ \iint_S [\nabla \times (A_2 \hat{j})] \cdot \hat{n} , dS = \oint_C A_2 dy \quad (6) ] [ \iint_S [\nabla \times (A_3 \hat{k})] \cdot \hat{n} , dS = \oint_C A_3 dz \quad (7) ]
Addition of equations (5), (6), and (7) gives the required result and completes the theorem.
💡 Why this matters: The proof decomposes the general vector field into its Cartesian components, allowing the theorem to be proven component-wise using projection and Green's theorem.
Extension to General Surfaces
The theorem is also valid for surfaces (S) which may not satisfy the restrictions imposed above. Assume that (S) can be subdivided into surfaces (S_1, S_2, S_3, ..., S_k) with boundaries (C_1, C_2, C_3, ..., C_k) which do satisfy the restrictions. Then Stokes' theorem holds for each such surface. Adding these surface integrals, the total surface integral over (S) is obtained. Adding the corresponding line integrals over (C_1, C_2, C_3, ..., C_k), the line integral over (C) is obtained.
⭐ Key Takeaways
Stokes' theorem transforms a line integral around a closed curve into a surface integral of the curl over any surface bounded by that curve. The proof decomposes the vector field into Cartesian components and uses Green's theorem in the plane for each component after projecting the surface onto coordinate planes. The restriction that the surface has simple projections on coordinate planes can be removed by subdividing the surface into simpler pieces where the theorem applies individually. The dot product of the tangent vector with the unit normal on the surface is used to eliminate the (\hat{j}) component in favor of the (\hat{k}) component, reducing the proof to a two-dimensional form. This theorem is the three-dimensional generalization of Green's theorem and is crucial for relating circulation around a curve to the rotational behavior of the field across the surface.
🧠 Quick Revision Questions
- Write the mathematical statement of Stokes' theorem for a vector field (\vec{A}).
- What is the key relationship used in the proof to eliminate the (\hat{n} \cdot \hat{j}) term in the surface integral?
- How is Green's theorem in the plane used in the proof of Stokes' theorem?
- How can Stokes' theorem be extended to surfaces that do not satisfy the restriction of having simple projections on coordinate planes?
- What does Stokes' theorem reduce to if the vector field (\vec{A}) is irrotational (i.e., (\nabla \times \vec{A} = 0))?
📘 Lecture 60 — Stokes’ Theorem in Rectangular Form
📖 Overview: This lecture presents Stokes’ Theorem in rectangular coordinate form, expressing the line integral of a vector field around a closed curve as a surface integral of the curl of the vector field. It provides the detailed algebraic derivation using direction cosines of the unit normal vector, enabling practical computation of the theorem in Cartesian coordinates.
🗂️ Topics Covered
The lecture begins by defining the outward unit normal vector in terms of direction cosines with respect to the x, y, and z axes. It then computes the curl of vector field ( \vec{A} ) in component form, takes the dot product of the curl with the unit normal, and expresses the line integral ( \vec{A} \cdot d\vec{r} ) in rectangular components. Finally, it presents Stokes’ Theorem in its full rectangular form.
📝 Lecture Summary
Introduction to Unit Normal in Rectangular Form
Let ( \vec{A} = \vec{A}_1 \hat{i} + \vec{A}_2 \hat{j} + \vec{A}_3 \hat{k} ) and let ( \hat{n} = n_1 \hat{i} + n_2 \hat{j} + n_3 \hat{k} ) be the outward drawn unit normal to the surface S. If ( \alpha, \beta, \gamma ) are the angles which the unit normal ( \hat{n} ) makes with the positive directions of x, y, and z axes respectively, then the components of the normal are the direction cosines:
🔑 Definition — Direction Cosines: ( n_1 = \hat{n} \cdot \hat{i} = \cos \alpha ), ( n_2 = \hat{n} \cdot \hat{j} = \cos \beta ), ( n_3 = \hat{n} \cdot \hat{k} = \cos \gamma ). These are the cosines of the angles the normal makes with the coordinate axes.
📌 Example: If a unit normal makes angles of 60° with x-axis, 45° with y-axis, and 60° with z-axis, then ( \hat{n} = \cos 60^\circ \hat{i} + \cos 45^\circ \hat{j} + \cos 60^\circ \hat{k} = 0.5 \hat{i} + 0.7071 \hat{j} + 0.5 \hat{k} ).
Thus we write: ( \hat{n} = \cos \alpha , \hat{i} + \cos \beta , \hat{j} + \cos \gamma , \hat{k} )
Computing Curl and Dot Product with Normal
The curl of ( \vec{A} ) is computed using the determinant:
📐 Formula: Curl of ( \vec{A} ): ( \nabla \times \vec{A} = \begin{vmatrix} \hat{i} & \hat{j} & \hat{k} \ \frac{\partial}{\partial x} & \frac{\partial}{\partial y} & \frac{\partial}{\partial z} \ \vec{A}_1 & \vec{A}_2 & \vec{A}_3 \end{vmatrix} ) → This expands to: ( \left( \frac{\partial \vec{A}_3}{\partial y} - \frac{\partial \vec{A}_2}{\partial z} \right) \hat{i} + \left( \frac{\partial \vec{A}_1}{\partial z} - \frac{\partial \vec{A}_3}{\partial x} \right) \hat{j} + \left( \frac{\partial \vec{A}_2}{\partial x} - \frac{\partial \vec{A}_1}{\partial y} \right) \hat{k} )
Taking the dot product with ( \hat{n} = \cos \alpha , \hat{i} + \cos \beta , \hat{j} + \cos \gamma , \hat{k} ):
📐 Formula: ( (\nabla \times \vec{A}) \cdot \hat{n} = \left( \frac{\partial \vec{A}_3}{\partial y} - \frac{\partial \vec{A}_2}{\partial z} \right) \cos \alpha + \left( \frac{\partial \vec{A}_1}{\partial z} - \frac{\partial \vec{A}_3}{\partial x} \right) \cos \beta + \left( \frac{\partial \vec{A}_2}{\partial x} - \frac{\partial \vec{A}_1}{\partial y} \right) \cos \gamma )
Line Integral in Rectangular Form
The line integral of ( \vec{A} ) along curve C is expressed in rectangular components:
📐 Formula: Line integral: ( \vec{A} \cdot d\vec{r} = (\vec{A}_1 \hat{i} + \vec{A}_2 \hat{j} + \vec{A}_3 \hat{k}) \cdot (dx , \hat{i} + dy , \hat{j} + dz , \hat{k}) = \vec{A}_1 dx + \vec{A}_2 dy + \vec{A}_3 dz )
Stokes’ Theorem in Rectangular Form
Substituting the expressions into Stokes’ Theorem gives the complete rectangular form:
📐 Formula: Stokes’ Theorem (Rectangular Form): [ \oint_C \vec{A}_1 dx + \vec{A}_2 dy + \vec{A}_3 dz = \iint_S \left[ \left( \frac{\partial \vec{A}_3}{\partial y} - \frac{\partial \vec{A}_2}{\partial z} \right) \cos \alpha + \left( \frac{\partial \vec{A}_1}{\partial z} - \frac{\partial \vec{A}_3}{\partial x} \right) \cos \beta + \left( \frac{\partial \vec{A}_2}{\partial x} - \frac{\partial \vec{A}_1}{\partial y} \right) \cos \gamma \right] dS ]
💡 Why this matters: This form allows direct application of Stokes’ Theorem in Cartesian coordinates without needing to transform to other coordinate systems. The direction cosines connect the surface orientation to the curl components.
⭐ Key Takeaways
- The unit normal to surface S is expressed as ( \hat{n} = \cos \alpha \hat{i} + \cos \beta \hat{j} + \cos \gamma \hat{k} ), where ( \cos \alpha, \cos \beta, \cos \gamma ) are direction cosines. 2. The dot product ( (\nabla \times \vec{A}) \cdot \hat{n} ) in rectangular form is the sum of three terms, each pairing a curl component with a direction cosine. 3. The line integral ( \vec{A} \cdot d\vec{r} ) becomes ( \vec{A}_1 dx + \vec{A}_2 dy + \vec{A}_3 dz ) in rectangular coordinates. 4. Stokes’ Theorem equates the closed line integral of these components to the surface integral of the curl-normal dot product. 5. The rectangular form is essential for problems involving surfaces defined in Cartesian coordinates.
🧠 Quick Revision Questions
- How do you express ( \hat{n} ), the outward unit normal, in terms of angles with coordinate axes?
- Write the expanded form of ( \nabla \times \vec{A} ) in rectangular components.
- What is the expression for ( (\nabla \times \vec{A}) \cdot \hat{n} ) when both are in rectangular form?
- How is the line integral ( \vec{A} \cdot d\vec{r} ) written in terms of dx, dy, dz and vector components?
- State the complete rectangular form of Stokes’ Theorem relating line and surface integrals.
📘 Lecture 61 — Verification of Stokes’ Theorem by an Example
📖 Overview: This lecture demonstrates the verification of Stokes’ theorem through a complete worked example. It shows how to compute both the line integral around a closed curve and the surface integral of the curl over the surface, confirming their equality for a specific vector field and surface geometry.
🗂️ Topics Covered
The lecture presents a problem statement to verify Stokes’ theorem for a given vector field over the upper half surface of a unit sphere. It first computes the line integral ∮A⃗·dr⃗ around the boundary circle using parametric equations. Then it calculates the curl ∇×A⃗, sets up the surface integral ∬(∇×A⃗)·n̂dS over the spherical surface, and evaluates it using a double integral over the projected circular region in the xy-plane. The equality of both results (π) verifies the theorem.
📝 Lecture Summary
Problem Statement
Verify Stokes’ theorem for A⃗ = (2x — y)î — yz²ĵ — y²zk̂, where S is the upper half surface of the sphere x² + y² + z² = 1 and C is its boundary (the circle in the xy-plane of radius 1).
🔑 Stokes’ theorem: ∮_C A⃗·dr⃗ = ∬_S (∇×A⃗)·n̂dS — relates the circulation of a vector field around a closed curve to the flux of its curl through the surface bounded by that curve.
Computing ∮_C A⃗·dr⃗ (Line Integral)
The boundary C is a circle in the xy-plane of radius 1 centered at the origin. Parametric equations: x = cos t, y = sin t, z = 0, 0 ≤ t ≤ 2π.
∮_C A⃗·dr⃗ = ∮_C [(2x — y)î — yz²ĵ — y²zk̂]·(dxî + dyĵ + dzk̂) = ∮_C (2x — y)dx — yz²dy — y²zdz
Substituting x=cos t, y=sin t, z=0, dz=0, dx=-sin t dt: = ∫₀²π (2 cos t — sin t)(-sin t)dt = ∫₀²π (-2 sin t cos t + sin² t)dt = ∫₀²π [-sin 2t + (1-cos 2t)/2]dt
📐 Formula: ∫₀²π sin 2t dt = 0, ∫₀²π cos 2t dt = 0, ∫₀²π dt = 2π
= [cos 2t/2 + t/2 — sin 2t/4]₀²π = (1/2 + π — 0) — (1/2 + 0 — 0) = π
Computing ∬_S (∇×A⃗)·n̂dS (Surface Integral)
First compute the curl ∇×A⃗:
| î | ĵ | k̂ |
|---|---|---|
| ∂/∂x | ∂/∂y | ∂/∂z |
| 2x-y | -yz² | -y²z |
∇×A⃗ = [∂(-y²z)/∂y — ∂(-yz²)/∂z]î — [∂(-y²z)/∂x — ∂(2x-y)/∂z]ĵ + [∂(-yz²)/∂x — ∂(2x-y)/∂y]k̂ = [(-2yz) — (-2yz)]î — [0 — 0]ĵ + [0 — (-1)]k̂ = k̂ (only a unit vector in z-direction)
💡 Why this matters: The curl simplifies dramatically, making the surface integral easy — it’s just the flux of k̂ through the surface.
Since ∇×A⃗ = k̂, we have: ∬_S (∇×A⃗)·n̂dS = ∬_S k̂·n̂dS
For the upper half-sphere, k̂·n̂dS = dxdy (the projection onto the xy-plane). So the integral reduces to: ∬_S k̂·n̂dS = ∬_R dxdy
where R is the circular region x²+y² ≤ 1 in the xy-plane.
Due to symmetry, compute for the first quadrant and multiply by 4: = 4∫₀¹ ∫₀^{√(1-x²)} dy dx = 4∫₀¹ √(1-x²)dx
Let x = sin t, dx = cos t dt, 0 ≤ t ≤ π/2: = 4∫₀^{π/2} √(1-sin²t) cos t dt = 4∫₀^{π/2} cos²t dt = 4∫₀^{π/2} (1+cos 2t)/2 dt = 2[t + sin 2t/2]₀^{π/2} = 2(π/2 + 0) = π
📌 Example: Both computations gave π, so ∮_C A⃗·dr⃗ = ∬_S (∇×A⃗)·n̂dS = π, verifying Stokes’ theorem.
⭐ Key Takeaways
Stokes’ theorem provides a powerful equivalence between a line integral around a closed curve and a surface integral of the curl over any surface bounded by that curve. In this verification, the line integral was computed using a parametric representation of the boundary circle, while the surface integral simplified because the curl reduced to k̂, allowing the surface integral to become a simple double integral over the projected circle in the xy-plane. The key technique for the line integral was trigonometric integration, and for the surface integral, the projection method reduced the curved surface to a flat region. Both methods must yield identical results, which they did (π), confirming the theorem. This example demonstrates how Stokes’ theorem can simplify computations by choosing the easier path — line integral or surface integral — depending on the problem.
🧠 Quick Revision Questions
- What are the parametric equations used for the boundary circle C in this problem?
- What is the curl ∇×A⃗ for the given vector field A⃗ = (2x-y)î — yz²ĵ — y²zk̂?
- Why does k̂·n̂dS become dxdy for the upper half-sphere surface?
- What transformation (substitution) was used to evaluate ∫₀¹ √(1-x²)dx?
- What final value was obtained for both the line integral and the surface integral?
📘 Lecture 62 — Another Example: Stokes’ Theorem
📖 Overview: This lecture demonstrates a proof using Stokes’ theorem by substituting a specific vector field ( \vec{A} = \vec{B} \times \vec{C} ), where (\vec{C}) is a constant vector. The goal is to prove an important vector identity relating a line integral of a cross product to a surface integral involving the curl operator. This matters because it shows how Stokes’ theorem can be applied to derive more complex vector relationships used in electromagnetism and fluid dynamics.
🗂️ Topics Covered
This lecture presents a proof of the identity (\oint_C d\vec{r} \times \vec{B} = \iint_S (\hat{n} \times \nabla) \times \vec{B} , dS) using Stokes’ theorem. The derivation starts by substituting (\vec{A} = \vec{B} \times \vec{C}) into Stokes’ theorem, simplifies using vector identities and the fact that (\vec{C}) is constant, and concludes by canceling the arbitrary constant vector (\vec{C}) to obtain the final result.
📝 Lecture Summary
Problem Statement
The problem is to prove the vector identity: (\oint_C d\vec{r} \times \vec{B} = \iint_S (\hat{n} \times \nabla) \times \vec{B} , dS). This identity relates a line integral of the cross product of (d\vec{r}) and (\vec{B}) to a surface integral involving the gradient operator and the unit normal vector (\hat{n}).
Proof
The proof begins with Stokes’ theorem, which states: [ \oint_C \vec{A} \cdot d\vec{r} = \iint_S (\nabla \times \vec{A}) \cdot \hat{n} , dS ] In Stokes’ theorem, let (\vec{A} = \vec{B} \times \vec{C}), where (\vec{C}) is a constant vector. Then: [ \oint_C (\vec{B} \times \vec{C}) \cdot d\vec{r} = \iint_S [\nabla \times (\vec{B} \times \vec{C})] \cdot \hat{n} , dS ]
🔑 Definition — Stokes’ Theorem: (\oint_C \vec{A} \cdot d\vec{r} = \iint_S (\nabla \times \vec{A}) \cdot \hat{n} , dS), relating a line integral around a closed curve (C) to the flux of the curl of (\vec{A}) through a surface (S) bounded by (C).
Using the vector identity for the curl of a cross product (with (\vec{C}) constant), we have: [ \nabla \times (\vec{B} \times \vec{C}) = (\vec{C} \cdot \nabla) \vec{B} - \vec{C} (\nabla \cdot \vec{B}) ] Substituting this into the right-hand side gives: [ \oint_C d\vec{r} \cdot (\vec{B} \times \vec{C}) = \iint_S [(\vec{C} \cdot \nabla) \vec{B} - \vec{C} (\nabla \cdot \vec{B})] \cdot \hat{n} , dS ]
On the left-hand side, using the vector triple product identity (d\vec{r} \cdot (\vec{B} \times \vec{C}) = \vec{C} \cdot (d\vec{r} \times \vec{B})), we obtain: [ \oint_C \vec{C} \cdot (d\vec{r} \times \vec{B}) = \iint_S (\vec{C} \cdot \nabla) \vec{B} \cdot \hat{n} , dS - \iint_S \vec{C} (\nabla \cdot \vec{B}) \cdot \hat{n} , dS ]
Since (\vec{C}) is constant, it can be factored out of the integrals: [ \vec{C} \cdot \oint_C (d\vec{r} \times \vec{B}) = \vec{C} \cdot \iint_S \nabla(\vec{B} \cdot \hat{n}) , dS - \vec{C} \cdot \iint_S \hat{n} (\nabla \cdot \vec{B}) , dS ]
Combining the surface integrals: [ \vec{C} \cdot \oint_C (d\vec{r} \times \vec{B}) = \vec{C} \cdot \iint_S [\nabla(\vec{B} \cdot \hat{n}) - \hat{n} (\nabla \cdot \vec{B})] , dS ]
Using the vector identity: ([\nabla(\vec{B} \cdot \hat{n}) - \hat{n} (\nabla \cdot \vec{B})] = (\hat{n} \times \nabla) \times \vec{B}), we get: [ \vec{C} \cdot \oint_C (d\vec{r} \times \vec{B}) = \vec{C} \cdot \iint_S (\hat{n} \times \nabla) \times \vec{B} , dS ]
Since (\vec{C}) is an arbitrary constant vector, we can cancel it from both sides, yielding the desired result: [ \oint_C (d\vec{r} \times \vec{B}) = \iint_S (\hat{n} \times \nabla) \times \vec{B} , dS ]
📌 Example: The entire lecture serves as the example — proving the identity by starting with Stokes’ theorem for (\vec{A} = \vec{B} \times \vec{C}), applying vector calculus identities, and canceling the arbitrary constant vector (\vec{C}).
💡 Why this matters: This proof demonstrates how Stokes’ theorem can be extended beyond its basic form to prove other vector identities, which are essential in field theory (e.g., deriving Maxwell’s equations in integral form).
⭐ Key Takeaways
- Stokes’ theorem can be used with a substitution (\vec{A} = \vec{B} \times \vec{C}) (where (\vec{C}) is constant) to derive new vector identities. The key steps involve using the identity (\nabla \times (\vec{B} \times \vec{C}) = (\vec{C} \cdot \nabla) \vec{B} - \vec{C} (\nabla \cdot \vec{B})) and the triple product property. The final result (\oint_C d\vec{r} \times \vec{B} = \iint_S (\hat{n} \times \nabla) \times \vec{B} , dS) is obtained by canceling the arbitrary constant vector (\vec{C}). This identity is a powerful tool in vector calculus for converting line integrals to surface integrals involving cross products.
🧠 Quick Revision Questions
- What specific substitution is made for (\vec{A}) in Stokes’ theorem to prove the given identity?
- Write down the vector identity used for (\nabla \times (\vec{B} \times \vec{C})) when (\vec{C}) is constant.
- How is the left-hand side (\oint_C (\vec{B} \times \vec{C}) \cdot d\vec{r}) rewritten using a vector triple product?
- Why can (\vec{C}) be factored out of both the line and surface integrals in the derivation?
- State the final identity proved in this lecture: (\oint_C d\vec{r} \times \vec{B} = ?)
📘 Lecture 63 — Related Theorem: Stokes’ Theorem
📖 Overview: This lecture presents and proves a related theorem to Stokes' theorem, establishing that a necessary and sufficient condition for the line integral of a vector field around every closed curve to be zero is that the curl of the vector field is identically zero everywhere. This fundamental result connects path independence to irrotational vector fields.
🗂️ Topics Covered
The lecture covers the theorem statement linking zero curl to zero line integrals around closed curves, the sufficiency proof using Stokes' theorem to show that zero curl implies zero circulation, and the necessity proof by contradiction which demonstrates that if the line integral is zero for every closed curve, then the curl must vanish identically.
📝 Lecture Summary
Theorem Statement
The theorem states: Prove that a necessary and sufficient condition that ∫_C A⃗ . dr⃗ = 0 for every closed curve C is that ∇ × A⃗ = 0 identically. This means the line integral vanishes around all closed paths if and only if the curl of the vector field is zero everywhere.
💡 Why this matters: This theorem is crucial because it characterizes conservative (or irrotational) vector fields — fields where work done is path-independent.
Proof — Sufficiency
Sufficiency: Suppose ∇ × A⃗ = 0. Then by Stokes' theorem: ∮_C A⃗ . dr⃗ = ∬_S (∇ × A⃗) . n̂ dS Since ∇ × A⃗ = 0, therefore ∬_S (∇ × A⃗) . n̂ dS = 0. Hence ∮_C A⃗ . dr⃗ = 0.
This direction shows that if the curl is zero everywhere, the circulation around any closed curve must vanish.
Proof — Necessity
Necessity: Assume ∮_C A⃗ . dr⃗ = 0 around every closed path C. Suppose ∇ × A⃗ ≠ 0 at some point P. If ∇ × A⃗ is continuous, there exists a region with P as an interior point where ∇ × A⃗ ≠ 0. Let S be a surface contained in this region whose normal n̂ at each point has the same direction as ∇ × A⃗, i.e. ∇ × A⃗ = αn̂ where α is a positive constant. Let C be the boundary of S. Then by Stokes' theorem: ∮_C A⃗ . dr⃗ = ∬_S (∇ × A⃗) . n̂ dS = ∬_S αn̂ . n̂ dS > 0 This contradicts the hypothesis that ∮_C A⃗ . dr⃗ = 0 and shows that ∇ × A⃗ = 0. Hence the theorem.
🔑 Definition — Irrotational field: A vector field A⃗ is called irrotational if ∇ × A⃗ = 0, which is equivalent to the line integral being path-independent (zero around any closed curve).
🔑 Definition — Conservative field: A vector field is conservative if the work done (line integral) between two points is independent of the path taken, which is equivalent to ∇ × A⃗ = 0.
⭐ Key Takeaways
The fundamental theorem presented in this lecture establishes that a vector field has zero circulation around every closed curve if and only if its curl is zero everywhere. The sufficiency proof uses Stokes' theorem directly to show that zero curl implies zero line integral. The necessity proof uses a contradiction argument: assuming non-zero curl at a point, constructing a surface with normal aligned to the curl direction leads to a positive line integral, contradicting the hypothesis. This theorem is the mathematical foundation for identifying conservative vector fields and is essential for understanding path independence of work in physics and electromagnetism.
🧠 Quick Revision Questions
- State the theorem proved in this lecture in your own words.
- In the sufficiency proof, what theorem is used to relate the line integral to the surface integral of curl?
- In the necessity proof, why does the construction of surface S with normal n̂ aligned to ∇ × A⃗ lead to a positive line integral?
- What is the key assumption made about the continuity of ∇ × A⃗ in the necessity proof?
- How does this theorem connect to the concept of conservative vector fields in physics?