📘 Lecture 23 — Damped Motion
📖 Overview: This lecture extends the analysis of spring-mass systems to include realistic damping forces (e.g., friction, air resistance). It derives the differential equation for free damped motion and classifies the three types of damping (over-damped, critically damped, and under-damped) based on the system parameters, analyzing the resulting motion in each case.
🗂️ Topics Covered
This lecture introduces the concept of a damping force proportional to velocity, derives the differential equation for free damped motion from Newton's Second Law, solves this equation using the auxiliary equation, and then distinguishes between the three possible cases of motion—over-damped, critically damped, and under-damped—based on the sign of the discriminant λ² - ω².
📝 Lecture Summary
23.1 Damping Force
In realistic systems, a resisting force (damping) always acts on a moving mass, for instance, due to a viscous medium. The damping force is modeled as being proportional to a power of the instantaneous velocity. In this lecture, we assume it is proportional to the first power of velocity.
🔑 Definition — Damping force: A retarding force acting opposite to the direction of motion, given by Damping force = -β (dx/dt), where β is a positive damping constant.
23.2 The Differential Equation
When a mass m attached to a spring is displaced, three forces act: weight (mg), the restoring force (-k(s+x)), and the damping force. Applying Newton's Second Law, F = ma, and using the equilibrium condition mg - ks = 0 leads to the differential equation of free damped motion.
For algebraic convenience, we define 2λ = β/m and ω² = k/m, where λ is the damping coefficient and ω is the natural frequency. The standard form of the equation is:
[
\frac{d^2x}{dt^2} + 2\lambda \frac{dx}{dt} + \omega^2 x = 0
]
23.2.1 Solution of the Differential Equation
To solve this second-order linear homogeneous ODE, we assume a solution of the form x(t) = e^{mt}, leading to the auxiliary equation: m² + 2λm + ω² = 0. The roots are found using the quadratic formula:
[
m = -\lambda \pm \sqrt{\lambda^2 - \omega^2}
]
The nature of the motion is entirely determined by the sign of the discriminant λ² - ω².
🔑 Definition — Over-damped motion: Occurs when λ² - ω² > 0 (or β > k). The system returns to equilibrium slowly without oscillating.
📐 Formula: x(t) = c₁e^{m₁t} + c₂e^{m₂t} or x(t) = e^{-λt}[c₁e^{√(λ²-ω²)t} + c₂e^{-√(λ²-ω²)t}]
📌 Example: A mass in a very thick, viscous fluid.
🔑 Definition — Critically damped motion: Occurs when λ² - ω² = 0 (or β = k). This represents the smallest amount of damping for which the system returns to equilibrium without oscillating.
📐 Formula: x(t) = c₁e^{m₁t} + c₂ t e^{m₁t} or x(t) = e^{-λt}(c₁ + c₂t)
📌 Example: The "perfect" shock absorber.
🔑 Definition — Under-damped motion: Occurs when λ² - ω² < 0 (or β < k). The system oscillates with a diminishing amplitude over time.
📐 Formula: x(t) = e^{-λt}[c₁ cos(√(ω²-λ²)t) + c₂ sin(√(ω²-λ²)t)]
📌 Example: A mass oscillating in water.
💡 Why this matters: In each case, the damping factor e^{-λt} (with λ > 0) causes the amplitude of motion to approach zero as time t → ∞, reflecting that the mass effectively comes to rest at its equilibrium position.
⭐ Key Takeaways
The lecture formalizes how to model resistance in a spring-mass system by introducing a damping force proportional to velocity. The resulting second-order ODE, x'' + 2λx' + ω²x = 0, has solutions that describe three distinct behaviors based on the discriminant λ² - ω². In over-damped and critically damped systems, the mass returns to equilibrium without oscillating, while in an under-damped system, the mass undergoes oscillations of decreasing amplitude. Critically damped motion is the boundary case that represents the fastest return to equilibrium without oscillation, which is crucial for practical applications like shock absorbers.
🧠 Quick Revision Questions
- What is the mathematical expression for the damping force considered in this lecture, and why is the sign negative?
- Derive the differential equation for the free damped motion of a spring-mass system, starting from Newton's Second Law.
- What are the three possible types of motion for a damped free system, and what condition on the discriminant
λ² - ω²defines each one? - Explain the physical meaning of the term
e^{-λt}in the solution for the under-damped case. What happens to the amplitude of oscillation as time increases? - A critically damped system is achieved when
λ² = ω². In terms of the spring constantkand massm, what must be the value of the damping coefficientβ?
📘 Lecture 24 — Forced Motion
📖 Overview: This lecture examines vibrational systems where an external driving force acts on the mass-spring-damper system, leading to non-homogeneous differential equations. It covers forced motion with damping, the solution process using undetermined coefficients, and the analogous electrical circuit (LRC series circuit). This material is essential for understanding how systems respond to periodic external inputs.
🗂️ Topics Covered
The lecture introduces forced motion with damping, deriving the non-homogeneous differential equation governing the system. It then solves an example problem of a forced damped spring-mass system with an initial value problem, followed by a discussion of the analogous electrical circuit consisting of an inductor, resistor, and capacitor in series, and its similarities to the mechanical system.
📝 Lecture Summary
24.1 Forced motion with damping
When an external force f(t) acts on the system, the total forces include the weight mg, the restoring force -k(s+x), the damping force -β(dx/dt), and the external force f(t). Applying Newton's second law of motion and using the equilibrium condition mg - ks = 0, we derive the non-homogeneous differential equation for forced motion with damping:
d²x/dt² + 2λ (dx/dt) + ω² x = F(t)
where F(t) = f(t)/m, 2λ = β/m, and ω² = k/m. To solve this equation, we can use either the method of undetermined coefficients or the variation of parameters.
Example 1
Interpret and solve the initial value problem: (1/5) d²x/dt² + 1.2 dx/dt + 2x = 5 cos 4t, with x(0) = 1/2, x'(0) = 0.
Interpretation The problem represents a vibrational system with mass m = 1/5 slugs (or kg), spring constant k = 2 lb/ft (or N/m), damping constant β = 1.2, and external periodic force f(t) = 5 cos 4t with period T = π/2. The mass is released from rest 1/2 ft (or m) below the equilibrium position.
Solution First, rewrite the differential equation by multiplying both sides by 5: d²x/dt² + 6 dx/dt + 10x = 25 cos 4t
Consider the associated homogeneous equation: d²x/dt² + 6 dx/dt + 10x = 0
Put x = e^(mt), so dx/dt = me^(mt) and d²x/dt² = m²e^(mt). The auxiliary equation is: m² + 6m + 10 = 0
📌 Note: The solution of this auxiliary equation is not fully computed in the lecture text, but would proceed using the quadratic formula to find m = -3 ± i. The homogeneous solution would then be x_h(t) = e^(-3t) (c₁ cos t + c₂ sin t). The particular solution and final solution would involve applying the method of undetermined coefficients to the non-homogeneous equation d²x/dt² + 6 dx/dt + 10x = 25 cos 4t, then using the initial conditions x(0) = 1/2 and x'(0) = 0 to determine the constants.
💡 Why this matters: The solution of this forced damped system will exhibit both a transient component (from the homogeneous solution that decays over time) and a steady-state component (from the particular solution that persists as long as the driving force is applied).
24.2 Forced Motion without Damping
The lecture text does not contain a section under this heading. The lecture moves directly to discussing the analogous electrical circuit.
24.3 Electrical Circuit Analogy: Series LRC Circuit
The flow of current in an electrical circuit consisting of an inductor (L), resistor (R), and capacitor (C) connected in series is analogous to the forced motion of a mechanical system. This similarity allows us to apply the same mathematical techniques to analyze electrical circuits.
⭐ Key Takeaways
The key concepts from this lecture are: (1) Forced motion introduces an external driving force f(t) into the damped spring-mass system, resulting in a non-homogeneous second-order linear differential equation. (2) The governing equation for forced motion with damping is d²x/dt² + 2λ (dx/dt) + ω² x = F(t), where F(t) = f(t)/m. (3) This non-homogeneous equation is solved by finding the complementary solution (from the homogeneous part) and a particular solution using methods like undetermined coefficients. (4) The solution consists of a transient part (decaying with time due to damping) and a steady-state part (driven by the external force). (5) The series LRC circuit provides a direct electrical analogy to the mechanical forced damped system.
🧠 Quick Revision Questions
- What are the four forces acting on a mass in a forced damped spring-mass system, and how do they combine to form the differential equation?
- What is the standard form of the non-homogeneous differential equation governing forced motion with damping, and what do the parameters λ, ω, and F(t) represent?
- Explain the difference between the transient and steady-state components of the solution to a forced damped system.
- What two methods can be used to find the particular solution of the non-homogeneous differential equation for forced motion?
- Which physical components in an electrical circuit correspond to the mass, damping, and spring constant in a mechanical forced system?
📘 Lecture 25 — Differential Equations (MTH401) — Forced Oscillations
📖 Overview: This lecture explores forced oscillations in spring-mass systems where an external periodic force is applied. It demonstrates how to solve non-homogeneous second-order linear differential equations with constant coefficients, and introduces the critical concepts of transient and steady-state solutions through detailed examples.
🗂️ Topics Covered
The lecture covers solving initial value problems for forced damped oscillations using the method of undetermined coefficients, analyzing transient and steady-state terms in solutions with damping, examining motion without damping including the special case of pure resonance when the forcing frequency equals the natural frequency, and applying L’Hôpital’s rule to find limiting solutions.
📝 Lecture Summary
24.2 Transient and Steady-State Terms
When a damped system is subjected to a periodic forcing function, the general solution consists of two distinct parts. The complementary function ( x_c(t) ) contains the factor ( e^{-\lambda t} ) which causes it to approach zero as ( t \to \infty ). This decaying part is called the transient term or transient solution. The particular solution ( x_p(t) ), which persists as time increases, is called the steady-state solution.
🔑 Definition — Transient Term: The part of the solution that approaches zero as ( t \to \infty ), typically containing exponential decay factors like ( e^{-\lambda t} ).
🔑 Definition — Steady-State Solution: The particular solution that remains after the transient has decayed, representing the long-term behavior of the system.
💡 Why this matters: In physical systems, the transient represents the initial disturbances that die out, while the steady-state represents the ongoing forced response that actually matters for most practical applications.
Example 2 — Solve the initial value problem: [ \frac{d^2x}{dt^2} + 2\frac{dx}{dt} + 2x = 4\cos t + 2\sin t, \quad x(0) = 0, ; x'(0) = 3 ]
Step 1: Find complementary function. The auxiliary equation for the homogeneous part is: [ m^2 + 2m + 2 = 0 ] Using the quadratic formula: [ m = \frac{-2 \pm \sqrt{4 - 8}}{2} = \frac{-2 \pm \sqrt{-4}}{2} = -1 \pm i ] Thus: [ x_c = e^{-t}(c_1\cos t + c_2\sin t) ]
Step 2: Find particular integral using undetermined coefficients. Assume: [ x_p = A\cos t + B\sin t ] [ x'_p = -A\sin t + B\cos t ] [ x''_p = -A\cos t - B\sin t ]
Substituting into the differential equation: [ (-A\cos t - B\sin t) + 2(-A\sin t + B\cos t) + 2(A\cos t + B\sin t) ] [ = (-A + 2B + 2A)\cos t + (-B - 2A + 2B)\sin t ] [ = (A + 2B)\cos t + (-2A + B)\sin t = 4\cos t + 2\sin t ]
Equating coefficients: [ A + 2B = 4 ] [ -2A + B = 2 ]
Solving: From the second equation, ( B = 2 + 2A ). Substituting into the first: [ A + 2(2 + 2A) = 4 ] [ A + 4 + 4A = 4 ] [ 5A = 0 \implies A = 0, ; B = 2 ]
Thus ( x_p = 2\sin t ).
Step 3: General solution: [ x(t) = e^{-t}(c_1\cos t + c_2\sin t) + 2\sin t ]
Step 4: Apply initial conditions. [ x'(t) = -e^{-t}(c_1\cos t + c_2\sin t) + e^{-t}(-c_1\sin t + c_2\cos t) + 2\cos t ]
From ( x(0) = 0 ): ( c_1 \cdot 1 + 0 + 0 = 0 \implies c_1 = 0 )
From ( x'(0) = 3 ): ( -c_1 \cdot 1 + c_2 \cdot 1 + 2 = 3 \implies c_2 = 1 )
Final solution: [ x(t) = e^{-t}\sin t + 2\sin t ]
The transient term is ( e^{-t}\sin t ) (decays to 0), and the steady-state is ( 2\sin t ). The transient becomes negligible for ( t > 2\pi ).
24.3 Motion without Damping
When a system is subjected to a periodic force but has no damping, there is no transient term in the solution. The system oscillates indefinitely with both the natural frequency and the forcing frequency present.
Example 3 — Solve the initial value problem: [ \frac{d^2x}{dt^2} + \omega^2 x = F_0 \sin \gamma t, \quad x(0) = 0, ; x'(0) = 0 ]
Step 1: Find complementary function. The auxiliary equation is: [ m^2 + \omega^2 = 0 \implies m = \pm \omega i ] Thus: [ x_c(t) = c_1\cos \omega t + c_2\sin \omega t ]
Step 2: Find particular integral. Assume ( x_p = A\cos \gamma t + B\sin \gamma t ). [ x'_p = -A\gamma\sin \gamma t + B\gamma\cos \gamma t ] [ x''_p = -A\gamma^2\cos \gamma t - B\gamma^2\sin \gamma t ]
Substituting: [ x''_p + \omega^2 x_p = (-A\gamma^2\cos \gamma t - B\gamma^2\sin \gamma t) + \omega^2(A\cos \gamma t + B\sin \gamma t) ] [ = A(\omega^2 - \gamma^2)\cos \gamma t + B(\omega^2 - \gamma^2)\sin \gamma t = F_0\sin \gamma t ]
Equating coefficients: [ A(\omega^2 - \gamma^2) = 0 \implies A = 0 ] [ B(\omega^2 - \gamma^2) = F_0 \implies B = \frac{F_0}{\omega^2 - \gamma^2} \quad (\gamma \neq \omega) ]
Thus: [ x_p(t) = \frac{F_0}{\omega^2 - \gamma^2}\sin \gamma t ]
Step 3: General solution: [ x(t) = c_1\cos \omega t + c_2\sin \omega t + \frac{F_0}{\omega^2 - \gamma^2}\sin \gamma t ] [ x'(t) = -c_1\omega\sin \omega t + c_2\omega\cos \omega t + \frac{F_0\gamma}{\omega^2 - \gamma^2}\cos \gamma t ]
Step 4: Apply initial conditions. From ( x(0) = 0 ): ( c_1 = 0 ) From ( x'(0) = 0 ): [ c_2\omega + \frac{F_0\gamma}{\omega^2 - \gamma^2} = 0 \implies c_2 = \frac{-F_0\gamma}{\omega(\omega^2 - \gamma^2)} ]
Final solution: [ x(t) = \frac{F_0}{\omega(\omega^2 - \gamma^2)}(-\gamma\sin \omega t + \omega\sin \gamma t), \quad \gamma \neq \omega ]
Important: This solution is not defined when ( \gamma = \omega ) (resonance). The limit as ( \gamma \to \omega ) can be found using L’Hôpital’s rule.
🔑 Definition — Resonance: The condition that occurs when the forcing frequency ( \gamma ) equals the natural frequency ( \omega ), causing the amplitude of oscillation to grow without bound in undamped systems.
📐 Formula: ( \lim_{\gamma \to \omega} x(t) = \frac{F_0}{2\omega^2}(\sin \omega t - \omega t \cos \omega t) )
⭐ Key Takeaways
The general solution of a forced damped system always consists of a transient part (complementary function, decaying to zero) and a steady-state part (particular solution, persisting indefinitely). For damped systems, the transient becomes negligible after approximately ( t > 2\pi ). In undamped systems, there is no transient, and the solution contains both natural and forcing frequency components. When the forcing frequency equals the natural frequency in an undamped system, resonance occurs producing unbounded oscillations. L’Hôpital’s rule is essential for finding the limiting solution at resonance when the standard formula becomes undefined.
🧠 Quick Revision Questions
- What distinguishes a transient term from a steady-state term in the solution of a forced damped oscillator?
- In Example 2, why does the assumed particular solution ( x_p = A\cos t + B\sin t ) work even though the complementary function also contains ( \cos t ) and ( \sin t )?
- What happens to the transient term in Example 2 when ( t > 2\pi ) and why?
- Why is the solution ( x(t) = \frac{F_0}{\omega(\omega^2 - \gamma^2)}(-\gamma\sin \omega t + \omega\sin \gamma t) ) not valid when ( \gamma = \omega )?
- In Example 3, what mathematical technique is used to find the limiting solution as ( \gamma \to \omega )?
📘 Lecture 26 — Forced Motion (Examples)
📖 Overview: This lecture examines the behavior of LRC series circuits by applying the mathematical framework of second-order linear differential equations developed for forced mechanical oscillations. It demonstrates how the charge on a capacitor and current in the circuit can be determined under various conditions, including the special case of resonance when damping is absent.
🗂️ Topics Covered
This lecture begins by deriving the response of an undamped system at resonance, showing that the amplitude grows without bound. It then introduces the LRC series circuit as an electrical analog of the forced damped harmonic oscillator, defining the roles of the resistor, inductor, and capacitor. Kirchhoff’s Voltage Law is applied to derive the governing differential equation for the charge, and the nature of the solution is classified based on the discriminant (overdamped, critically damped, underdamped). Finally, two detailed examples are solved: an LC circuit with no resistance and an LRC circuit with given parameters.
📝 Lecture Summary
24.4 Electric Circuits
Many physical systems, including electrical circuits, are governed by a second-order linear differential equation identical in form to that of forced mechanical motion:
m d²x/dt² + β dx/dt + kx = f(t). The LRC series circuit is a direct electrical analog, allowing insights from one system to be applied to the other.
24.5 The LRC Series Circuits
An LRC series circuit consists of an inductor (L), a resistor (R), and a capacitor (C) connected in series with a time-varying voltage source E(t).
🔑 Definition — Resistor: An electrical component that opposes the flow of current. Its opposition is called resistance (R). Ohm’s Law states V = IR, where V is voltage and I is current. Current is inversely proportional to resistance.
🔑 Definition — Inductor: A passive component that stores energy in a magnetic field. It opposes changes in current, producing a counter emf. The voltage across an inductor is V = L dI/dt, where inductance (L) is measured in Henry (H).
🔑 Definition — Capacitor: A passive component that stores charge and opposes voltage changes. Its ability to store charge is capacitance (C). The voltage across a capacitor is V = q/C, where q is the charge, and capacitance is measured in farad (F).
24.6 Kirchhoff’s Voltage Law
Kirchhoff’s 2nd law states that the sum of voltage drops around any closed loop equals the sum of voltage rises.
24.6.1 The Differential Equation
For the LRC circuit, the voltage drops across the inductor (V_L = L dI/dt), resistor (V_R = RI), and capacitor (V_C = q/C) sum to the source voltage E(t). Substituting I = dq/dt (current is the rate of flow of charge) gives the governing differential equation:
📐 Formula: L d²q/dt² + R dq/dt + q/C = E(t)
💡 Why this matters: This equation is mathematically identical to the driven, damped harmonic oscillator. If E(t)=0 and R≠0, the circuit exhibits free damped oscillations. If E(t)=0 and R=0, it exhibits free undamped oscillations.
24.6.2 Solution of the differential equation
The general solution consists of a complementary function (solution to the homogeneous equation) and a particular integral. Substituting q = e^(mt) into the homogeneous equation (L d²q/dt² + R dq/dt + q/C = 0) yields the auxiliary equation:
📐 Formula: Lm² + Rm + 1/C = 0
The nature of the roots, and thus the system’s behavior, depends on the discriminant Disc = R² - 4L/C:
- Overdamped:
Disc > 0→ real and distinct roots. - Critically damped:
Disc = 0→ real and equal roots. - Underdamped:
Disc < 0→ complex roots.
In all three cases where R ≠ 0, the solution contains the factor e^(-Rt/2L), meaning q(t) → 0 as t → ∞. In the underdamped case, the charge oscillates as it decays. If R=0 and E(t)=0, the electrical vibrations are Simple Harmonic and do not decay.
25 Forced Motion (Examples)
Example 1: LC Series Circuit
An LC circuit has no resistor, so R dq/dt = 0. The source voltage E(t) = 0. The governing equation becomes:
📐 Formula: L d²q/dt² + q/C = 0
The initial conditions are q(0) = q₀ and I(0) = 0 (which implies q'(0) = 0). The auxiliary equation is Lm² + 1/C = 0, giving m = ± i/√(LC). The solution is:
📌 Example: q(t) = c₁ cos(t/√(LC)) + c₂ sin(t/√(LC))
Applying q(0) = q₀ gives c₁ = q₀. Applying q'(0) = 0 gives c₂ = 0.
Therefore, the charge is q(t) = q₀ cos(t/√(LC)). The current is I(t) = dq/dt = -(q₀/√(LC)) sin(t/√(LC)).
Example 2: LRC Series Circuit
Find the charge q(t) on the capacitor in an LRC series circuit with L = 0.25 H (= 1/4), R = 10 Ω, C = 0.001 F (= 1/1000), E(t) = 0, q(0) = q₀, and I(0) = 0.
📌 Example: The governing equation is L d²q/dt² + R dq/dt + q/C = 0. Substituting values: (1/4) d²q/dt² + 10 dq/dt + 1000q = 0. Multiplying by 4: d²q/dt² + 40 dq/dt + 4000q = 0. The auxiliary equation is m² + 40m + 4000 = 0. The discriminant is 40² - 4*1*4000 = 1600 - 16000 = -14400 < 0, so the circuit is underdamped with complex roots: m = [-40 ± √(-14400)]/2 = [-40 ± 120i]/2 = -20 ± 60i.
⭐ Key Takeaways
The LRC series circuit is an exact electrical analog of the forced, damped harmonic oscillator, governed by the equation L q'' + R q' + q/C = E(t). The system’s behavior—overdamped, critically damped, or underdamped—is determined solely by the discriminant R² - 4L/C of the auxiliary equation. When R=0 and E(t)=0, the circuit produces simple harmonic oscillations described by q(t) = q₀ cos(t/√(LC)). The charge q(t) always decays to zero as t→∞ when R≠0. A key skill is translating circuit parameters into the differential equation and applying initial conditions to find the specific solution for charge and current.
🧠 Quick Revision Questions
- Write the differential equation governing an LRC series circuit and identify the electrical analog of each term in the mechanical equation
m x'' + β x' + kx = f(t). - What three types of damping behavior are possible in an LRC circuit, and what condition on the discriminant defines each?
- In a damped LRC circuit (R≠0), what happens to the charge on the capacitor as
t → ∞? - Derive the expression for the charge
q(t)on the capacitor in an LC series circuit withE(t)=0, initial chargeq₀, and no initial current. - For an LRC circuit with
L=0.25 H,R=10 Ω,C=0.001 F, andE(t)=0, determine if the circuit is overdamped, critically damped, or underdamped.
📘 Lecture 27 — Differential Equations with Variable Coefficients
📖 Overview: This lecture introduces differential equations with variable (non-constant) coefficients, which arise frequently in applications such as potential theory, temperature distributions, and vibration phenomena. The focus is on the Cauchy-Euler equation, a special type of variable-coefficient ODE that can be solved using a power substitution method analogous to constant-coefficient equations. The lecture covers three cases for the roots of the auxiliary equation—distinct real, repeated real, and complex conjugate—and provides examples for each.
🗂️ Topics Covered
The lecture begins by motivating the study of variable-coefficient equations with examples from physics and engineering. It then defines the Cauchy-Euler equation and introduces the method of solution by assuming (y = x^m). The solution procedure is developed for the second-order homogeneous case, and three distinct cases are analyzed depending on the nature of the roots of the auxiliary equation: distinct real roots, repeated real roots, and complex conjugate roots. For the repeated root case, the method of reduction of order is used to find a second linearly independent solution involving (\ln x). The complex root case is handled using Euler's formula to express the solution in terms of real functions involving (\cos(\beta \ln x)) and (\sin(\beta \ln x)). The lecture also notes that the method extends to higher-order equations and non-homogeneous equations.
📝 Lecture Summary
Differential Equations with Variable Coefficients
So far, we have solved linear differential equations with constant coefficients. Now, we discuss equations with non-constant (variable) coefficients. These equations arise in applications such as temperature or potential (u) in the region between two concentric spheres, leading to equations like (r \frac{d^2 u}{dr^2} + 2 \frac{du}{dr} = 0) where (r > 0). Other important examples include Bessel's equation (x^2 y'' + x y' + (x^2 - v^2)y = 0), Legendre's equation ((1-x^2)y'' - 2xy' + n(n+1)y = 0), and Hermite's equation (y'' - 2xy' + 2ny = 0). These equations cannot be solved as easily as constant-coefficient ones.
26.1 Cauchy-Euler Equation
Any linear differential equation of the form: [ a_n x^n \frac{d^n y}{dx^n} + a_{n-1} x^{n-1} \frac{d^{n-1} y}{dx^{n-1}} + \cdots + a_1 x \frac{dy}{dx} + a_0 y = g(x) ] where (a_n, a_{n-1}, \ldots, a_0) are constants, is called a Cauchy-Euler equation or equi-dimensional equation. The degree of each monomial coefficient matches the order of differentiation. For convenience, we focus on the homogeneous second-order case: [ ax^2 \frac{d^2 y}{dx^2} + bx \frac{dy}{dx} + cy = 0, \quad x \neq 0 ] Solutions for higher-order equations follow analogously. Non-homogeneous equations can be solved by variation of parameters after finding the complementary function (y_c(x)).
26.1.1 Method of Solution
We try a solution of the form (y = x^m), where (m) is to be determined. The first and second derivatives are: [ \frac{dy}{dx} = m x^{m-1}, \quad \frac{d^2 y}{dx^2} = m(m-1) x^{m-2} ] Substituting into the differential equation yields: [ ax^2 \cdot m(m-1)x^{m-2} + bx \cdot m x^{m-1} + c x^m = x^m \left( am(m-1) + bm + c \right) = 0 ] Thus, (y = x^m) is a solution whenever (m) satisfies the auxiliary equation: [ am(m-1) + bm + c = 0 \quad \text{or} \quad am^2 + (b-a)m + c = 0 ] The solution depends on the nature of the roots of this equation.
26.1.2 Case I (Distinct Real Roots)
Let (m_1) and (m_2) be real roots such that (m_1 \neq m_2). Then (y = x^{m_1}) and (y = x^{m_2}) form a fundamental set of solutions. The general solution is: [ y = c_1 x^{m_1} + c_2 x^{m_2} ]
📌 Example 1: Solve (x^2 \frac{d^2 y}{dx^2} - 2x \frac{dy}{dx} - 4y = 0).
Assume (y = x^m, \frac{dy}{dx} = m x^{m-1}, \frac{d^2 y}{dx^2} = m(m-1) x^{m-2}). Substituting: [ x^2 \cdot m(m-1)x^{m-2} - 2x \cdot m x^{m-1} - 4x^m = x^m (m(m-1) - 2m - 4) = x^m (m^2 - 3m - 4) = 0 ] The auxiliary equation is (m^2 - 3m - 4 = 0), which gives (m_1 = -1, m_2 = 4). Since the roots are real and distinct, the general solution is: [ y = c_1 x^{-1} + c_2 x^4 ]
26.1.3 Case II (Repeated Real Roots)
If the roots are equal ((m_1 = m_2)), we obtain only one solution (y_1 = x^{m_1}). To find a second linearly independent solution, we use the method of reduction of order. Writing the Cauchy-Euler equation in standard form (\frac{d^2 y}{dx^2} + P(x) \frac{dy}{dx} + Q(x) y = 0), we identify (P(x) = \frac{b}{ax}). The second solution is given by: [ y_2 = y_1 \int \frac{e^{-\int P(x) dx}}{(y_1)^2} dx = x^{m_1} \int \frac{e^{-(b/a) \ln x}}{x^{2m_1}} dx = x^{m_1} \int x^{-b/a} \cdot x^{-2m_1} dx ] Since the roots are equal, (m_1 = -\frac{b-a}{2a}), so (-2m_1 = \frac{b-a}{a}). This gives: [ y_2 = x^{m_1} \int x^{-b/a} \cdot x^{(b-a)/a} dx = x^{m_1} \int x^{-1} dx = x^{m_1} \ln x ] The general solution is: [ y = c_1 x^{m_1} + c_2 x^{m_1} \ln x ] For higher-order equations, if (m_1) is a root of multiplicity (k), the (k) linearly independent solutions are (x^{m_1}, x^{m_1} \ln x, x^{m_1} (\ln x)^2, \ldots, x^{m_1} (\ln x)^{k-1}).
📌 Example 2: Solve (4x^2 \frac{d^2 y}{dx^2} + 8x \frac{dy}{dx} + y = 0).
Assume (y = x^m). Substituting: [ 4x^2 \cdot m(m-1)x^{m-2} + 8x \cdot m x^{m-1} + x^m = x^m (4m(m-1) + 8m + 1) = x^m (4m^2 + 4m + 1) = 0 ] The auxiliary equation is (4m^2 + 4m + 1 = 0) or ((2m+1)^2 = 0), so the repeated root is (m = -1/2). The general solution is: [ y = c_1 x^{-1/2} + c_2 x^{-1/2} \ln x ]
26.1.4 Case III (Conjugate Complex Roots)
If the roots are a conjugate pair (m_1 = \alpha + i\beta, m_2 = \alpha - i\beta) with (\alpha, \beta > 0) real, the solution is: [ y = c_1 x^{\alpha + i\beta} + c_2 x^{\alpha - i\beta} ] To express this in terms of real functions, we use the identity: [ x^{i\beta} = (e^{\ln x})^{i\beta} = e^{i\beta \ln x} = \cos(\beta \ln x) + i \sin(\beta \ln x) ] Similarly, (x^{-i\beta} = \cos(\beta \ln x) - i \sin(\beta \ln x)). Adding and subtracting gives: [ x^{i\beta} + x^{-i\beta} = 2 \cos(\beta \ln x), \quad x^{i\beta} - x^{-i\beta} = 2i \sin(\beta \ln x) ] Choosing appropriate constants ((c_1 = c_2 = 1) and (c_1 = 1, c_2 = -1)), we obtain two real linearly independent solutions: [ y_1 = x^\alpha \cos(\beta \ln x), \quad y_2 = x^\alpha \sin(\beta \ln x) ] The general solution in real form is: [ y = x^\alpha \left[ c_1 \cos(\beta \ln x) + c_2 \sin(\beta \ln x) \right] ]
🔑 Definition — Auxiliary Equation for Cauchy-Euler: The equation (am^2 + (b-a)m + c = 0) obtained by substituting (y = x^m) into the Cauchy-Euler equation (ax^2 y'' + bx y' + cy = 0). 📐 Formula (General Solution for Complex Roots): (y = x^\alpha [c_1 \cos(\beta \ln x) + c_2 \sin(\beta \ln x)]), where (\alpha \pm i\beta) are the complex conjugate roots of the auxiliary equation. 💡 Why this matters: The use of (\ln x) in the solution (rather than (x) as in constant-coefficient cases) reflects the variable coefficient structure and is crucial for correctly modeling physical systems where the independent variable is a radial distance or other non-uniform coordinate.
⭐ Key Takeaways
The Cauchy-Euler equation is a special type of variable-coefficient ODE that can be solved by assuming a solution of the form (y = x^m), leading to an auxiliary equation. The nature of the roots—distinct real, repeated real, or complex conjugate—determines the form of the general solution. For distinct real roots (m_1) and (m_2), the general solution is a linear combination of (x^{m_1}) and (x^{m_2}). For repeated roots, a second solution containing (\ln x) is obtained via reduction of order. For complex conjugate roots (\alpha \pm i\beta), the real-valued solution involves (x^\alpha) multiplied by (\cos(\beta \ln x)) and (\sin(\beta \ln x)). This method extends naturally to higher-order equations and to non-homogeneous problems.
🧠 Quick Revision Questions
- What is the standard form of a second-order homogeneous Cauchy-Euler equation?
- How do you find the auxiliary equation for a Cauchy-Euler equation?
- What is the general solution when the auxiliary equation has two distinct real roots?
- How do you construct a second linearly independent solution when the auxiliary equation has a repeated real root?
- Write the general solution in real form when the auxiliary equation has complex conjugate roots (\alpha \pm i\beta).
📘 Lecture 27 — Cauchy-Euler Equation (Alternative Method of Solution)
📖 Overview: This lecture introduces an alternative method for solving Cauchy-Euler differential equations by reducing them to differential equations with constant coefficients through the substitution (x = e^t) or (t = \ln x). This approach simplifies the solving process, especially for higher-order equations, by transforming variable coefficients into constant coefficients, allowing standard solution techniques to be applied.
🗂️ Topics Covered
This lecture covers the alternative method of solving Cauchy-Euler equations using the substitution (x = e^t), which transforms the equation into one with constant coefficients. It introduces new differential operators (\Delta = d/dt) and the operational relationships (xD = \Delta), (x^2 D^2 = \Delta(\Delta - 1)), etc. Several examples are solved, including second-order homogeneous equations with distinct real, repeated, and complex roots, as well as a third-order equation and a non-homogeneous equation solved via variation of parameters after transformation.
📝 Lecture Summary
The Substitution Method
The Cauchy-Euler equation can be reduced to a differential equation with constant coefficients through the substitution: [ x = e^t \quad \text{or} \quad t = \ln x ]
Using the chain rule, the derivatives transform as: [ \frac{dy}{dx} = \frac{dy}{dt} \cdot \frac{dt}{dx} = \frac{1}{x} \cdot \frac{dy}{dt} ] [ \frac{d^2 y}{dx^2} = \frac{1}{x^2} \cdot \frac{d^2 y}{dt^2} - \frac{1}{x^2} \cdot \frac{dy}{dt} ]
Therefore: [ x\frac{dy}{dx} = \frac{dy}{dt} ] [ x^2\frac{d^2 y}{dx^2} = \frac{d^2 y}{dt^2} - \frac{dy}{dt} ]
Introducing the notation: [ D = \frac{d}{dx}, \quad D^2 = \frac{d^2}{dx^2}, \quad \Delta = \frac{d}{dt}, \quad \Delta^2 = \frac{d^2}{dt^2} ]
We obtain the operational relationships: [ xD = \Delta ] [ x^2 D^2 = \Delta^2 - \Delta = \Delta(\Delta - 1) ] [ x^3 D^3 = \Delta(\Delta - 1)(\Delta - 2) ] [ x^4 D^4 = \Delta(\Delta - 1)(\Delta - 2)(\Delta - 3) ]
💡 Why this matters: This substitution transforms any Cauchy-Euler equation into a constant-coefficient differential equation in terms of (t), which can then be solved using standard methods with (y = e^{mt}).
Example 1: Distinct Real Roots
Solve: (x^2 \frac{d^2 y}{dx^2} - 2x \frac{dy}{dx} - 4y = 0)
Solution: Write the equation as ((x^2 D^2 - 2xD - 4)y = 0).
With substitution (x = e^t), using (xD = \Delta) and (x^2 D^2 = \Delta(\Delta - 1)): [ [\Delta(\Delta - 1) - 2\Delta - 4]y = 0 ] [ (\Delta^2 - 3\Delta - 4)y = 0 ] [ \frac{d^2 y}{dt^2} - 3\frac{dy}{dt} - 4y = 0 ]
Substitute (y = e^{mt}): [ (m^2 - 3m - 4)e^{mt} = 0 ] [ m^2 - 3m - 4 = 0 ] [ (m + 1)(m - 4) = 0 \implies m = -1, 4 ]
🔑 Definition — Auxiliary equation: (m^2 - 3m - 4 = 0) with distinct real roots.
The solution in terms of (t) is: [ y = c_1 e^{-t} + c_2 e^{4t} ]
Since (x = e^t), the solution in terms of (x) is: [ y = c_1 x^{-1} + c_2 x^{4} ]
Example 2: Repeated Real Roots
Solve: (4x^2 \frac{d^2 y}{dx^2} + 8x \frac{dy}{dx} + y = 0)
Solution: Write as ((4x^2 D^2 + 8xD + 1)y = 0).
With (x = e^t), (xD = \Delta), (x^2 D^2 = \Delta(\Delta - 1)): [ (4\Delta(\Delta - 1) + 8\Delta + 1)y = 0 ] [ (4\Delta^2 + 4\Delta + 1)y = 0 ] [ 4\frac{d^2 y}{dt^2} + 4\frac{dy}{dt} + y = 0 ]
Substitute (y = e^{mt}): [ (4m^2 + 4m + 1)e^{mt} = 0 ] [ 4m^2 + 4m + 1 = 0 ] [ (2m + 1)^2 = 0 \implies m = -\frac{1}{2}, -\frac{1}{2} \text{ (repeated)} ]
📐 Formula: For repeated roots, the solution is (y = (c_1 + c_2 t)e^{mt}).
Solution in terms of (t): [ y = (c_1 + c_2 t)e^{-\frac{1}{2}t} ]
Since (t = \ln x): [ y = (c_1 + c_2 \ln x)x^{-\frac{1}{2}} ] [ y = c_1 x^{-\frac{1}{2}} + c_2 x^{-\frac{1}{2}} \ln x ]
Example 3: Complex Roots (Initial Value Problem)
Solve: (x^2 \frac{d^2 y}{dx^2} + 3x \frac{dy}{dx} + 3y = 0), (y(1) = 1), (y'(1) = -5)
Solution: Write as ((x^2 D^2 + 3xD + 3)y = 0).
With (x = e^t), (xD = \Delta), (x^2 D^2 = \Delta(\Delta - 1)): [ (\Delta(\Delta - 1) + 3\Delta + 3)y = 0 ] [ (\Delta^2 + 2\Delta + 3)y = 0 ] [ \frac{d^2 y}{dt^2} + 2\frac{dy}{dt} + 3y = 0 ]
Substitute (y = e^{mt}): [ m^2 + 2m + 3 = 0 ] [ m = \frac{-2 \pm \sqrt{4 - 12}}{2} = \frac{-2 \pm \sqrt{-8}}{2} = -1 \pm i\sqrt{2} ]
📌 Example: For complex roots (\alpha \pm i\beta), the solution is (y = e^{\alpha t}(c_1 \cos \beta t + c_2 \sin \beta t)).
Here (\alpha = -1), (\beta = \sqrt{2}), so: [ y = e^{-t}(c_1 \cos \sqrt{2}t + c_2 \sin \sqrt{2}t) ] [ y = x^{-1}(c_1 \cos(\sqrt{2}\ln x) + c_2 \sin(\sqrt{2}\ln x)) ]
Apply initial conditions:
- (y(1) = 1): (1 = c_1 \cos 0 + c_2 \sin 0 \implies c_1 = 1)
- Find (y'): [ y' = -x^{-2}(c_1 \cos(\sqrt{2}\ln x) + c_2 \sin(\sqrt{2}\ln x)) + x^{-2}(-\sqrt{2}c_1 \sin(\sqrt{2}\ln x) + \sqrt{2}c_2 \cos(\sqrt{2}\ln x)) ]
- (y'(1) = -5): (-5 = -(1) + \sqrt{2}c_2 \implies \sqrt{2}c_2 = -4 \implies c_2 = -2\sqrt{2})
Solution: (y = x^{-1}[\cos(\sqrt{2}\ln x) - 2\sqrt{2}\sin(\sqrt{2}\ln x)])
Example 4: Third-Order Cauchy-Euler Equation
Solve: (x^3 \frac{d^3 y}{dx^3} + 5x^2 \frac{d^2 y}{dx^2} + 7x \frac{dy}{dx} + 8y = 0)
Solution: Write as ((x^3 D^3 + 5x^2 D^2 + 7xD + 8)y = 0).
With (x = e^t), using: [ xD = \Delta, \quad x^2 D^2 = \Delta(\Delta - 1), \quad x^3 D^3 = \Delta(\Delta - 1)(\Delta - 2) ]
[ [\Delta(\Delta - 1)(\Delta - 2) + 5\Delta(\Delta - 1) + 7\Delta + 8]y = 0 ] [ (\Delta^3 - 3\Delta^2 + 2\Delta + 5\Delta^2 - 5\Delta + 7\Delta + 8)y = 0 ] [ (\Delta^3 + 2\Delta^2 + 4\Delta + 8)y = 0 ] [ \frac{d^3 y}{dt^3} + 2\frac{d^2 y}{dt^2} + 4\frac{dy}{dt} + 8y = 0 ]
Substitute (y = e^{mt}): [ m^3 + 2m^2 + 4m + 8 = 0 ] [ (m^2 + 4)(m + 2) = 0 \implies m = -2, \pm 2i ]
Solution: [ y = c_1 e^{-2t} + c_2 \cos 2t + c_3 \sin 2t ] [ y = c_1 x^{-2} + c_2 \cos(2\ln x) + c_3 \sin(2\ln x) ]
Example 5: Non-Homogeneous Equation (Using Alternative Method)
Solve: (x^2 y'' - 3xy' + 3y = 2x^4 e^x)
Solution: First solve the homogeneous part: (x^2 y'' - 3xy' + 3y = 0).
Write as ((x^2 D^2 - 3xD + 3)y = 0).
With (x = e^t), (xD = \Delta), (x^2 D^2 = \Delta(\Delta - 1)): [ [\Delta(\Delta - 1) - 3\Delta + 3]y = 0 ] [ (\Delta^2 - 4\Delta + 3)y = 0 ] [ \frac{d^2 y}{dt^2} - 4\frac{dy}{dt} + 3y = 0 ]
Substitute (y = e^{mt}): [ m^2 - 4m + 3 = 0 \implies (m - 3)(m - 1) = 0 \implies m = 1, 3 ]
Complementary solution: [ y_c = c_1 e^t + c_2 e^{3t} = c_1 x + c_2 x^3 ]
For the particular solution, use variation of parameters. First write the original equation in standard form: [ y'' - \frac{3}{x}y' + \frac{3}{x^2}y = 2x^2 e^x ]
Here (f(x) = 2x^2 e^x), (y_1 = x), (y_2 = x^3).
Wronskian: [ W = \begin{vmatrix} x & x^3 \ 1 & 3x^2 \end{vmatrix} = 3x^3 - x^3 = 2x^3 ]
[ W_1 = \begin{vmatrix} 0 & x^3 \ 2x^2 e^x & 3x^2 \end{vmatrix} = 0 - 2x^5 e^x = -2x^5 e^x ]
[ W_2 = \begin{vmatrix} x & 0 \ 1 & 2x^2 e^x \end{vmatrix} = 2x^3 e^x - 0 = 2x^3 e^x ]
Then: [ u_1' = \frac{W_1}{W} = \frac{-2x^5 e^x}{2x^3} = -x^2 e^x ] [ u_2' = \frac{W_2}{W} = \frac{2x^3 e^x}{2x^3} = e^x ]
Integrate: [ u_1 = \int -x^2 e^x dx = -(x^2 - 2x + 2)e^x ] [ u_2 = \int e^x dx = e^x ]
Particular solution: [ y_p = u_1 y_1 + u_2 y_2 = [-(x^2 - 2x + 2)e^x]x + e^x \cdot x^3 ] [ y_p = -x^3 e^x + 2x^2 e^x - 2xe^x + x^3 e^x = 2x^2 e^x - 2xe^x ]
General solution: [ y = y_c + y_p = c_1 x + c_2 x^3 + 2x^2 e^x - 2x e^x ]
⭐ Key Takeaways
The alternative method using the substitution (x = e^t) or (t = \ln x) transforms any Cauchy-Euler equation into a constant-coefficient differential equation, which can be solved using standard techniques. The key operational relationships are (xD = \Delta), (x^2 D^2 = \Delta(\Delta - 1)), (x^3 D^3 = \Delta(\Delta - 1)(\Delta - 2)), and so on. After solving the transformed equation in terms of (t), substitute back using (x = e^t) to obtain the solution in terms of (x). This method works for homogeneous equations with all types of roots (distinct real, repeated real, and complex) as well as non-homogeneous equations when combined with variation of parameters.
🧠 Quick Revision Questions
- What substitution transforms a Cauchy-Euler equation into a constant-coefficient equation?
- What are the operational relationships for (xD), (x^2 D^2), and (x^3 D^3) in terms of (\Delta)?
- How do you handle repeated roots when using this alternative method?
- In Example 3, how were the constants (c_1) and (c_2) determined from the initial conditions?
- After finding the solution in terms of (t), how do you convert it back to the solution in terms of (x)?
📘 Lecture 28 — Power Series (An Introduction)
📖 Overview: This lecture introduces power series as a standard technique for solving linear differential equations with variable coefficients. It covers the fundamental concepts of power series, including convergence, divergence, the Ratio Test, and how to determine the interval and radius of convergence—essential tools for finding series solutions to differential equations.
🗂️ Topics Covered
The lecture begins by defining power series in (x - a) and their components. It then explains convergence and divergence of power series, introduces the Ratio Test for determining convergence, and describes the interval of convergence and radius of convergence. Finally, it discusses how to investigate convergence at the endpoints of the interval.
📝 Lecture Summary
28 Power Series (An Introduction)
A standard technique for solving linear differential equations with variable coefficients is to find a solution as an infinite series, often in the form of a power series. This lecture discusses important facts about power series, but an in-depth review of infinite series concepts should be consulted in a standard calculus text.
28.1 Power Series
A power series in ((x - a)) is an infinite series of the form:
[ \sum_{n=0}^{\infty} c_n (x - a)^n = c_0 + c_1 (x - a) + c_2 (x - a)^2 + \ldots ]
The coefficients (c_0, c_1, c_2, \ldots) and (a) are constants, and (x) represents a variable. In this discussion, we consider only real numbers for the coefficients, (x), and (a). The number (a) is known as the centre of the power series.
📌 Example 1: The infinite series (\sum_{n=1}^{\infty} \frac{(-1)^{n+1}}{n^2} x^n = x - \frac{x^2}{2^2} + \frac{x^3}{3^2} - \ldots) is a power series in (x) centered at zero.
28.2 Convergence and Divergence
If we choose a specified value of the variable (x), the power series becomes an infinite series of constants. If, for the given (x), the sum of terms of the power series equals a finite real number, the series is said to be convergent at (x). A power series that is not convergent is said to be divergent, meaning the sum of its terms is not a finite real number.
📌 Example 2: (a) The series (\sum_{n=0}^{\infty} \frac{x^n}{n!} = 1 + x + \frac{x^2}{2!} + \frac{x^3}{3!} + \ldots) converges at (x=1) to the number (e). (b) The series (\sum_{n=0}^{\infty} n!(x+2)^n = 1 + (x+2) + 2!(x+2)^2 + 3!(x+2)^3 + \ldots) diverges for all (x) except (x=-2).
28.2.1 The Ratio Test
To determine for which values of (x) a power series converges, one can often use the Ratio Test. For a power series (\sum_{n=0}^{\infty} a_n = \sum_{n=0}^{\infty} c_n (x - a)^n), if: [ \lim_{n \to \infty} \left| \frac{a_{n+1}}{a_n} \right| = \lim_{n \to \infty} |x - a| \cdot \left| \frac{c_{n+1}}{c_n} \right| = L ] Then:
- The power series converges absolutely for values of (x) where (L < 1).
- The power series diverges for values of (x) where (L > 1) or (L = \infty).
- The test is inconclusive for values of (x) where (L = 1).
28.2.2 Interval of Convergence
The set of all real values of (x) for which a power series (\sum_{n=0}^{\infty} c_n (x - a)^n) converges is known as the interval of convergence of the power series.
28.2.3 Radius of Convergence
Consider a power series (\sum_{n=0}^{\infty} c_n (x - a)^n). Exactly one of three possibilities is true:
- The series converges only at its center (x = a).
- The series converges for all values of (x).
- There is a number (R > 0) such that the series converges absolutely for all (x) satisfying (|x - a| < R) and diverges for (|x - a| > R). The series converges for (x \in (a - R, a + R)) and diverges outside this interval.
The number (R) is called the radius of convergence. If the first possibility holds, then (R = 0). In the second case, we write (R = \infty). From the Ratio Test, the radius of convergence is given by: 🔑 Definition — Radius of Convergence (R): [ R = \lim_{n \to \infty} \left| \frac{c_n}{c_{n+1}} \right| ] provided the limit exists.
28.2.4 Convergence at an Endpoint
If the radius of convergence is (R > 0), the interval of convergence is one of the following: ((a - R, a + R)), ((a - R, a + R]), ([a - R, a + R)), or ([a - R, a + R]). To determine which interval applies, separate investigations are needed for the numbers (x = a - R) and (x = a + R).
📌 Example 3: Consider the power series (\sum_{n=1}^{\infty} \frac{1}{n} x^n). Using the Ratio Test: [ \lim_{n \to \infty} \left| \frac{a_{n+1}}{a_n} \right| = \lim_{n \to \infty} \left| \frac{x^{n+1}}{n+1} \cdot \frac{n}{x^n} \right| = \lim_{n \to \infty} \frac{n}{n+1} |x| = |x| ] The series converges absolutely for (|x| < 1), i.e., the interval ((-1, 1)), and diverges for (|x| > 1). To check the endpoints:
- At (x = 1): (\sum_{n=1}^{\infty} \frac{1}{n}) (the harmonic series), which diverges.
- At (x = -1): The series would be (\sum_{n=1}^{\infty} \frac{(-1)^n}{n}), an alternating harmonic series, which converges conditionally.
⭐ Key Takeaways
The most critical concept from this lecture is understanding the definition of a power series and how to determine its convergence behavior. You must be able to apply the Ratio Test to find the radius of convergence (R) and the open interval of convergence. Remember that the ratio test is inconclusive at the endpoints, so each endpoint must be tested separately by substitution. The ultimate goal is to find the interval of convergence, which is the set of (x) values for which the series converges.
🧠 Quick Revision Questions
- What is the general form of a power series centered at (a)?
- What does the Ratio Test tell us about the convergence of a power series?
- How do you calculate the radius of convergence (R) from the coefficients of a power series?
- If the radius of convergence is (R = 2) and the center is (a = 0), what is the open interval of convergence?
- Why must the endpoints of the interval of convergence be tested separately?