📘 Lecture 13 — Orthogonal Surface
📖 Overview: This lecture covers the concept of normal lines to surfaces and the condition for orthogonal surfaces. It also introduces the total differential for functions of one and two variables, demonstrating how differentials can be used for approximations and error analysis in real-world problems.
🗂️ Topics Covered
The lecture covers the normal line to a surface at a point, the definition and condition for orthogonal surfaces with examples, the differential of a function of one variable including its distinction from the actual change, and the total differential for functions of two variables used to approximate changes and errors.
📝 Lecture Summary
Normal line
Let P₀(x₀, y₀, z₀) be any point on the surface f(x, y, z) = 0. If f(x, y, z) is differentiable at P₀(x₀, y₀, z₀) then the normal line at the point P₀(x₀, y₀, z₀) has the equation x = x₀ + fₓ(P₀)t, y = y₀ + fᵧ(P₀)t, z = z₀ + f_z(P₀)t. Here fₓ means the function is partially differentiable with respect to x, and fₓ(P₀) means the partial derivative evaluated at point P₀. The same notation applies for fᵧ and f_z.
📌 Example: Find the equation of the tangent plane and normal line of the surface f(x, y, z) = x² + y² + z² - 14 at point P(1, -2, 3).
- fₓ = 2x, fᵧ = 2y, f_z = 2z
- fₓ(P₀) = 2, fᵧ(P₀) = -4, f_z(P₀) = 6
- Tangent plane equation: 2(x - 1) - 4(y + 2) + 6(z - 3) = 0 → x - 2y + 3z - 14 = 0
- Normal line equations: (x - 1)/2 = (y + 2)/(-4) = (z - 3)/6, which simplifies to (x - 1)/1 = (y + 2)/(-2) = (z - 3)/3
📌 Example: Find the tangent plane and normal line for 4x² - y² + 3z² = 10 at P(2, -3, 1).
- f(x, y, z) = 4x² - y² + 3z² - 10
- fₓ = 8x, fᵧ = -2y, f_z = 6z
- fₓ(P) = 16, fᵧ(P) = 6, f_z(P) = 6
- Tangent plane: 16(x - 2) + 6(y + 3) + 6(z - 1) = 0 → 8x + 3y + 3z = 10
- Normal line: (x - 2)/16 = (y + 3)/6 = (z - 1)/6, simplifies to (x - 2)/8 = (y + 3)/3 = (z - 1)/3
📌 Example: Find the tangent plane and normal line for z = (1/2)x⁷y⁻² at point (2, 4, 4).
- f(x, y, z) = (1/2)x⁷y⁻² - z
- fₓ = (7/2)x⁶y⁻², fᵧ = -x⁷y⁻³, f_z = -1
- fₓ(2, 4, 4) = 14, fᵧ(2, 4, 4) = -2, f_z(2, 4, 4) = -1
- Tangent plane: 14(x - 2) + (-2)(y - 4) + (-1)(z - 4) = 0 → 14x - 2y - z - 16 = 0
- Normal line: x = 2 + 14t, y = 4 - 2t, z = 4 - t
ORTHOGONAL SURFACES
Two surfaces are said to be orthogonal at a point of their intersection if their normals at that point are orthogonal. They are said to intersect orthogonally if they are orthogonal at every point common to them.
🔑 Definition — Orthogonal Surfaces: Two surfaces are orthogonal at a point of intersection if their normal lines at that point are perpendicular (orthogonal).
CONDITION FOR ORTHOGONAL SURFACES
Let (x, y, z) be any point of intersection of f(x, y, z) = 0 and g(x, y, z) = 0. Direction ratios of a normal line to f are fₓ, fᵧ, f_z. Direction ratios of a normal line to g are gₓ, gᵧ, g_z. The two normal lines are orthogonal if and only if fₓgₓ + fᵧgᵧ + f_zg_z = 0.
📌 Example: Show whether f(x, y, z) = x² + y² + z - 16 and g(x, y, z) = x² + y² - 63z are orthogonal.
- Adding (1) and (2): x² + y² = 63/4, z = 1/4
- fₓ = 2x, fᵧ = 2y, f_z = 1
- gₓ = 2x, gᵧ = 2y, g_z = -63
- fₓgₓ + fᵧgᵧ + f_zg_z = 4(x² + y²) - 63 = 4(63/4) - 63 = 63 - 63 = 0
- Since they satisfy the condition of orthogonality, they are orthogonal.
Differentials of a functions
For a function y = f(x), the differential is dy = f'(x)dx. The differential of x (dx) is the same as the actual change in x, i.e., dx = Δx, whereas dy is the approximate change in the value of the function, which is different from the actual change Δy in the value of the function.
💡 Why this matters: The differential gives a linear approximation to the change in the function, useful for estimating values near a known point.
If f is differentiable at x₀, then the tangent line to the curve y = f(x) at x₀ is a reasonably good approximation near x₀. The tangent line equation is y = f(x₀) + f'(x₀)(x - x₀).
📌 Example: f(x) = √x, x = 4, dx = Δx = 3, Δy = 3
- Δy = √(x + Δx) - √x = √7 - √4 ≈ 0.65
- If y = √x, dy/dx = 1/(2√x), so dy = (1/(2√x))dx = (1/(2√4))(3) = 3/4 = 0.75
📌 Example: Use differentials to approximate cos 61°.
- Let y = cos x, x = 60°, dx = 61° - 60° = 1° = π/180 radians
- Δy ≈ dy = -sin x dx = -sin 60°(π/180) = -(√3/2)(π/180)
- cos 61° = cos(x + dx) ≈ cos x + dy = cos 60° - (√3/2)(π/180)
- cos 61° ≈ 0.5 - 0.01511 = 0.48489
📌 Example: A box with a square base has its height twice its width. If the width is 8.5 inches with a possible error of ±0.3 inches, find the possible error in volume.
- V = x²h, with h = 2x, so V = 2x³
- dV = 6x²dx
- With x = 8.5, dx = ±0.3: dV = 6(8.5)²(±0.3) = ±130.05
- The possible error in volume is ±130.05 cubic inches.
TOTAL DIFFERENTIAL
If we move from (x₀, y₀) to a nearby point (x₀ + dx, y₀ + dy), the resulting differential in f is the total differential: df = fₓ(x₀, y₀)dx + fᵧ(x₀, y₀)dy. This change in the linearization of f is called the total differential of f.
💡 Why this matters: The total differential allows us to approximate the change in a multivariable function when small changes occur in its variables.
📌 Example: A rectangular plate expands so that length changes from 10 to 10.03 and breadth from 8 to 8.02.
- Area A = xy, dA = Aₓdx + Aᵧdy = ydx + xdy
- x = 10, dx = 0.03, y = 8, dy = 0.02
- dA = 8(0.03) + 10(0.02) = 0.24 + 0.20 = 0.44
- Exact change = 80.4406 - 80 = 0.4406, so the differential approximation is very close.
📌 Example: The volume V = xyz. If z decreases by 2% while x and y increase by 0.75% each, find the approximate change in V.
- dV = Vₓdx + Vᵧdy + V_zdx = yzdx + xzdy + xydz
- dx = (0.75/100)x, dy = (0.75/100)y, dz = (-2/100)z
- dV = (0.75/100)xyz + (0.75/100)xyz - (2/100)xyz = (-0.5/100)xyz = (-0.5/100)V
- This shows a 0.5% decrease in volume.
📌 Example: For triangle area Δ = (1/2)ab sin C, find the approximate error if a = 9.1 (instead of 9), b = 4.08 (instead of 4), C = 30°3' (instead of 30°).
- a = 9, b = 4, C = 30°, da = 0.1, db = 0.08, dC = 3' = (3/60)° = (π/3600) radians
- dΔ = (1/2)b sin C·da + (1/2)a sin C·db + (1/2)ab cos C·dC
- dΔ = (1/2)(4)(sin 30°)(0.1) + (1/2)(9)(sin 30°)(0.08) + (1/2)(9)(4)(cos 30°)(π/3600)
- dΔ = 2(0.5)(0.1) + 4.5(0.5)(0.08) + 18(√3/2)(π/3600) = 0.1 + 0.18 + 0.0136 ≈ 0.293
- Percentage change: (0.293/Δ) × 100 = (0.293/9) × 100 = 3.25%
⭐ Key Takeaways
The normal line to a surface at a point has direction ratios given by the partial derivatives at that point. Two surfaces are orthogonal at intersection points when the dot product of their normal vectors equals zero. The differential of a function of one variable approximates the actual change, with the tangent line providing a linear approximation near a point. For functions of two or more variables, the total differential combines the effects of small changes in all variables, enabling approximation of errors and changes in applications like geometry and physics.
🧠 Quick Revision Questions
- What is the equation of the normal line to the surface f(x,y,z) = 0 at point P₀(x₀,y₀,z₀)?
- What is the mathematical condition for two surfaces to be orthogonal at their point of intersection?
- What is the difference between dy and Δy for a function y = f(x)?
- Write the formula for the total differential of a function f(x,y) when moving from (x₀,y₀) to (x₀+dx, y₀+dy).
- In the triangle area example with a 0.5% decrease in volume, what percentage change in volume actually occurred?
📘 Lecture 14 — Extrema of Functions of Two Variables
📖 Overview: This lecture introduces techniques for finding the highest and lowest points on the graph of a function of two variables, which correspond to the largest and smallest values of the function. It defines absolute and relative extrema, introduces the Extreme Value Theorem, and explains how to find critical points. The lecture also covers the concept of a saddle point, where a function has neither a maximum nor a minimum at a critical point.
🗂️ Topics Covered
The lecture covers absolute maximum and minimum definitions for functions of two variables, followed by definitions for relative (local) maximum and minimum. It then presents the Extreme Value Theorem, which guarantees the existence of absolute extrema under specific conditions. The lecture explains how to find extreme values using critical points and partial derivatives, and concludes with the concept of a saddle point, illustrated by a worked example.
📝 Lecture Summary
Extrema of Functions of Two Variables
The graph of many functions forms hills and valleys. The tops of the hills are relative maxima and the bottom of the valleys are called relative minima. Just as the top of a hill on the earth’s terrain need not be the highest point on the earth, a relative maximum need not be the highest point on the entire graph.
Absolute maximum
A function f of two variables on a subset D of ℝ² is said to have an absolute (global) maximum value on D if there is some point (x₀, y₀) of D such that f(x₀, y₀) ≥ f(x, y) for all (x, y) ∈ D. In such a case f(x₀, y₀) is the absolute maximum value of f on D.
Absolute minimum
A function f of two variables on a subset D of ℝ² is said to have an absolute (global) minimum value on D if there is some point (x₀, y₀) of D such that f(x₀, y₀) ≤ f(x, y) for all (x, y) ∈ D. In such a case f(x₀, y₀) is the absolute minimum value of f on D.
Relative extremum and absolute extremum
If f has a relative maximum or a relative minimum at (x₀, y₀), then we say that f has a relative extremum at (x₀, y₀), and if f has an absolute maximum or absolute minimum at (x₀, y₀), then we say that f has an absolute extremum at (x₀, y₀).
Relative (local) maximum
The function f is said to have a relative (local) maximum at some point (x₀, y₀) of its domain D if there exists an open disc K centered at (x₀, y₀) and of radius r, K = {(x, y) ∈ ℝ² : (x − x₀)² + (y − y₀)² < r² }, with K ⊂ D such that f(x₀, y₀) ≥ f(x, y) for all (x, y) ∈ K.
Relative (local) minimum
The function f is said to have a relative (local) minimum at some point (x₀, y₀) of D if there exists an open disc K centred at (x₀, y₀) and of radius r with K ⊂ D such that f(x₀, y₀) ≤ f(x, y) for all (x, y) ∈ K.
Extreme Value Theorem
If f(x, y) is continuous on a closed and bounded set R, then f has both an absolute maximum and an absolute minimum on R.
Remarks: If any of the conditions of the Extreme Value Theorem fail to hold, then there is no guarantee that an absolute maximum or absolute minimum exists on the region R. Thus, a discontinuous function on a closed and bounded set need not have any absolute extrema, and a continuous function on a set that is not closed and bounded also need not have any absolute extrema.
Extreme values or extrema of f
The maximum and minimum values of f are referred to as extreme values or extrema of f. Let a function f of two variables be defined on an open disc K = {(x, y): (x − x₀)² + (y − y₀)² < r² }. Suppose fₓ(x₀, y₀) and fᵧ(x₀, y₀) both exist on K. If f has a relative extrema at (x₀, y₀), then:
🔑 Definition — Critical Point Condition: fₓ(x₀, y₀) = 0 = fᵧ(x₀, y₀).
Saddle Point
A differentiable function f(x, y) has a saddle point (a, b) if in every open disk centered at (a, b) there are domain points (x, y) where f(x, y) > f(a, b) and domain points (x, y) where f(x, y) < f(a, b). The corresponding point (a, b, f(a, b)) on the surface z = f(x, y) is called a saddle point of the surface.
Remarks: Thus, the only points where a function f(x, y) can assume extreme values are critical points and boundary points. As with differentiable functions of a single variable, not every critical point gives rise to a local extremum. A differentiable function of a single variable might have a point of inflection. A differentiable function of two variables might have a saddle point.
💡 Why this matters: The saddle point concept is crucial because it shows that simply finding where the partial derivatives are zero is not enough; you must further test these critical points to determine if they are maxima, minima, or saddle points.
EXAMPLE
Fine the critical points of the given function f(x, y) = x³ + y³ − 3axy, a > 0.
fₓ, fᵧ exist at all points of the domain of f. fₓ = 3x² − 3ay, fᵧ = 3y² − 3ax
For critical points fₓ = fᵧ = 0. Therefore, x² − ay = 0 (1) and ax − y² = 0 (2)
Substituting the value of x from (2) into (1), we have: y² / a − ay = 0 y(y³ − a³) = 0 y = 0, y = a and so x = 0, x = a.
📌 Example: The critical points are (0, 0) and (a, a).
⭐ Key Takeaways
The most critical concepts to remember are the precise definitions of absolute and relative maxima/minima, as these form the basis for identifying extrema. The Extreme Value Theorem provides the necessary conditions for the guaranteed existence of absolute extrema. The condition that at a relative extremum the first partial derivatives must both be zero is a necessary condition for finding critical points. Crucially, one must remember that not every critical point is an extremum; a point where the first partial derivatives are zero could be a saddle point, as demonstrated in the example.
🧠 Quick Revision Questions
- What is the formal definition of an absolute maximum value of a function f on a set D?
- State the Extreme Value Theorem for a function of two variables. What are its two necessary conditions for the existence of absolute extrema?
- If a function f has a relative extremum at a point (x₀, y₀) and its first partial derivatives exist there, what must be true about those derivatives?
- Define what is meant by a saddle point of a differentiable function f(x, y).
- For the function f(x, y) = x³ + y³ − 3xy, find the two critical points.
📘 Lecture 15 — Examples
📖 Overview: This lecture applies the concepts of critical points and the Second Partial Derivative Test to classify relative extrema (minima and maxima) and saddle points for functions of several variables. It provides a series of worked examples demonstrating how to find critical points, compute second-order partial derivatives, and use the discriminant D to determine the nature of these points, which is essential for understanding the shape of multivariable functions.
🗂️ Topics Covered
The lecture begins by reviewing functions where partial derivatives do not exist at a critical point, specifically using the cone f(x,y)=√(x²+y²). It then formally introduces The Second Partial Derivative Test with its four cases. The remainder of the lecture is dedicated to applying this test to a variety of functions, including a polynomial (f(x,y)=2x²-4x+xy²-1), an exponential function (f(x,y)=e^-(x²+y²+2x)), a quartic polynomial (f(x,y)=2x⁴+y²-x²-2y), and a function with symmetric terms (f(x,y)=4xy-x⁴-y⁴).
📝 Lecture Summary
Example
The function is defined as f(x, y) = √(x² + y²). The partial derivatives are fx(x, y) = x / √(x² + y²) and fy(x, y) = y / √(x² + y²).
🔑 Definition — Critical Point: A point in the domain of f where all first partial derivatives are zero or where at least one partial derivative does not exist.
The partial derivatives exist at all points of the domain except at the origin (0,0). Thus (0, 0) is a critical point of f. Now fx(x, y) = 0 only if x = 0 and fy(x, y) = 0 only if y = 0. The only critical point is (0,0) and f(0,0)=0. Since f(x, y) ≥ 0 for all (x, y), f(0, 0) = 0 is the absolute minimum value of f.
Example
The function is z = f(x, y) = x² + y² (Paraboloid). fx(x, y) = 2x, fy(x, y) = 2y. Setting fx(x, y) = 0 and fy(x, y) = 0 gives the critical point (0, 0). This is a classic example of a function with a relative minimum.
Example
The function is z = g(x, y) = 1 - x² - y² (Paraboloid). gx(x, y) = -2x, gy(x, y) = -2y. Setting gx(x, y) = 0 and gy(x, y) = 0 gives the critical point (0, 0). This is an example of a function with a relative maximum.
Example
The function is z = h(x, y) = y² - x² (Hyperbolic Paraboloid). hx(x, y) = -2x, hy(x, y) = 2y. Setting hx(x, y) = 0 and hy(x, y) = 0 gives the critical point (0, 0). This function has a saddle point at the origin.
Example
The function is f(x, y) = √(x² + y²). fx = x / √(x² + y²), fy = y / √(x² + y²). The point (0,0) is a critical point of f because the partial derivatives do not both exist. It is evident geometrically that fx(0,0) does not exist because the trace of the cone in the plane y=0 has a corner at the origin.
The fact that fx(0,0) does not exist can also be seen algebraically by noting that fx(0,0) can be interpreted as the derivative with respect to x of the function f(x, 0) = √(x² + 0) = |x| at x = 0. But |x| is not differentiable at x = 0, so fx(0,0) does not exist. Similarly, fy(0,0) does not exist. The function f has a relative minimum at the critical point (0,0).
The Second Partial Derivative Test
Let f be a function of two variables with continuous second order partial derivatives in some circle centered at a critical point (x₀, y₀), and let D = fxx(x₀, y₀) fyy(x₀, y₀) - [fxy(x₀, y₀)]².
(a) If D > 0 and fxx(x₀, y₀) > 0, then f has a relative minimum at (x₀, y₀). (b) If D > 0 and fxx(x₀, y₀) < 0, then f has a relative maximum at (x₀, y₀). (c) If D < 0, then f has a saddle point at (x₀, y₀). (d) If D = 0, then no conclusion can be drawn.
REMARKS: If a function f of two variables has an absolute extremum (either an absolute maximum or an absolute minimum) at an interior point of its domain, then this extremum occurs at a critical point.
Example
The function is f(x, y) = 2x² - 4x + xy² - 1. First partial derivatives: fx(x, y) = 4x - 4 + y², fy(x, y) = 2xy. Second partial derivatives: fxx(x, y) = 4, fyy(x, y) = 2x, fxy(x, y) = fyx(x, y) = 2y. For critical points, set first partials to zero: 4x - 4 + y² = 0 (1) and 2xy = 0 (2). From (2), x = 0 or y = 0. If x = 0, from (1), y = ±2. If y = 0, from (1), x = 1. The critical points are (1,0), (0, 2), (0, -2).
Check the nature of each point:
- At (1,0): fxx(1,0)=4, fyy(1,0)=2, fxy(1,0)=0. D = (4)(2) - (0)² = 8 > 0. Since fxx is positive, f has a relative minimum at (1,0).
- At (0,-2): fxx(0,-2)=4, fyy(0,-2)=0, fxy(0,-2)=-4. D = (4)(0) - (-4)² = -16 < 0. Therefore, f has a saddle point at (0,-2).
- At (0,2): fxx(0,2)=4, fyy(0,2)=0, fxy(0,2)=4. D = (4)(0) - (4)² = -16 < 0. Therefore, f has a saddle point at (0,2).
Example
The function is f(x, y) = e^-(x² + y² + 2x). First partial derivatives: fx(x, y) = -2(x+1)e^-(x²+y²+2x), fy(x, y) = -2y e^-(x²+y²+2x). For critical points, fx=0 implies x+1=0 so x=-1, fy=0 implies y=0. Hence the critical point is (-1, 0).
Second partial derivatives: fxx(x,y) = [(-2x-2)² - 2]e^-(x²+y²+2x), fyy(x,y) = [4y² - 2]e^-(x²+y²+2x), fxy(x,y) = -2y(-2x-2)e^-(x²+y²+2x). At (-1, 0): fxx(-1,0) = -2e, fyy(-1,0) = -2e, fxy(-1,0) = 0. D = (-2e)(-2e) - (0)² = 4e² > 0. With D>0 and fxx<0, this shows that f is maximum at (-1, 0).
Example
The function is f(x, y) = 2x⁴ + y² - x² - 2y. First partials: fx(x, y) = 8x³ - 2x, fy(x, y) = 2y - 2. Second partials: fxx(x, y) = 24x² - 2, fyy(x, y) = 2, fxy(x, y) = 0. For critical points: fx=0 gives 2x(4x² - 1) = 0, so x = 0, 1/2, -1/2. fy=0 gives 2y - 2 = 0, so y = 1. The critical points are (0,1), (1/2, 1), (-1/2, 1).
- At (0,1): fxx(0,1) = -2, fyy(0,1) = 2, fxy(0,1) = 0. D = (-2)(2) - 0 = -4 < 0. This shows that (0, 1) is a saddle point.
- At (1/2, 1): fxx(1/2, 1) = 4, fyy(1/2, 1) = 2, fxy(1/2, 1) = 0. D = (4)(2) - 0 = 8 > 0. Since fxx > 0, f has a relative minimum at (1/2, 1).
- At (-1/2, 1): fxx(-1/2, 1) = 4, fyy(-1/2, 1) = 2, fxy(-1/2, 1) = 0. D = (4)(2) - 0 = 8 > 0. Since fxx > 0, f has a relative minimum at (-1/2, 1).
Example
The function is f(x, y) = 4xy - x⁴ - y⁴. First partials: fx(x, y) = 4y - 4x³, fy(x, y) = 4x - 4y³. For critical points: fx=0 gives 4y - 4x³ = 0 => y = x³ (1). fy=0 gives 4x - 4y³ = 0 => x = y³ (2). Solving (1) and (2), the critical points are (0,0), (1,1), (-1,-1).
Second partials: fxx(x, y) = -12x², fyy(x, y) = -12y², fxy(x, y) = 4.
- At (0,0): fxx(0,0)=0, fyy(0,0)=0, fxy(0,0)=4. D = (0)(0) - (4)² = -16 < 0. This shows that (0,0) is the saddle point.
- At (1,1): fxx(1,1)=-12, fyy(1,1)=-12, fxy(1,1)=4. D = (-12)(-12) - (4)² = 144 - 16 = 128 > 0. Since fxx<0, f has a relative maximum at (1,1).
- At (-1,-1): fxx(-1,-1)=-12, fyy(-1,-1)=-12, fxy(-1,-1)=4. D = (-12)(-12) - (4)² = 144 - 16 = 128 > 0. Since fxx<0, f has a relative maximum at (-1,-1).
⭐ Key Takeaways
The Second Partial Derivative Test is the primary tool for classifying critical points, but it is only valid for points where second-order partial derivatives are continuous. The discriminant D = fxx fyy - (fxy)² determines the nature of the critical point: if D > 0 and fxx > 0, it is a relative minimum; if D > 0 and fxx < 0, it is a relative maximum; if D < 0, it is a saddle point. When D = 0, the test is inconclusive and other methods are needed. A critical point is defined by either the vanishing or the non-existence of first partial derivatives, as seen in the cone example.
🧠 Quick Revision Questions
- What are the conditions for the Second Partial Derivative Test to conclude a relative minimum?
- In the function f(x,y)=2x²-4x+xy²-1, why are both (0,2) and (0,-2) classified as saddle points even though they have the same coordinates for x and y?
- For the function f(x,y)=√(x²+y²), why is (0,0) a critical point despite the first partial derivatives not being zero there?
- If D = 0 for a critical point of f, can you determine if the point is a maximum, minimum, or saddle point?
- When analyzing the function f(x,y)=4xy-x⁴-y⁴, how many critical points are found, and how are they classified?
📘 Lecture 16 — Extreme Valued Theorem
📖 Overview: This lecture introduces the Extreme Value Theorem, which guarantees that a continuous function on a closed interval attains both an absolute maximum and an absolute minimum. It provides a systematic procedure for finding these absolute extrema for single-variable functions and extends the method to functions of two variables on closed and bounded regions.
🗂️ Topics Covered
The lecture covers the Extreme Value Theorem for single-variable functions, including its statement and a three-step procedure for finding absolute extrema on closed intervals with worked examples. It then extends these concepts to functions of two variables, presenting a three-step method for finding absolute extrema on closed and bounded regions, followed by detailed worked examples on triangular regions.
📝 Lecture Summary
EXTREME VALUED THEOREM
If the function f is continuous on the closed interval [a, b], then f has an absolute maximum value and an absolute minimum value on [a, b].
Remarks: An absolute extremum of a function on a closed interval must be either a relative extremum or a function value at an endpoint of the interval. Since a necessary condition for a function to have a relative extremum at a point C is that C be a critical point, we may determine the absolute maximum value and the absolute minimum value of a continuous function f on a closed interval [a, b] by the following procedure:
- Find the critical points of f on [a, b] and the function values at these critical points.
- Find the values of f(a) and f(b).
- The largest and the smallest of the above calculated values are the absolute maximum value and the absolute minimum value respectively.
🔑 Definition — Critical Point: A point in the domain where the derivative is zero or does not exist. 📐 Procedure: Evaluate f at critical points and endpoints → Largest value is absolute max, smallest is absolute min.
Example 1
Find the absolute extrema of f(x) = x³ + x² - x + 1 on [-2, 1/2]
Since f is continuous on [-2, 1/2], the extreme value theorem is applicable. f'(x) = 3x² + 2x - 1. f'(x) exists for all real numbers, so critical numbers are where f'(x) = 0. Setting f'(x) = 0: (3x - 1)(x + 1) = 0 → x = -1 and x = 1/3. Both points lie in (-2, 1/2).
📌 Example: Evaluate f at critical points and endpoints: f(-2) = -1, f(-1) = 2, f(1/3) = 22/27, f(1/2) = 7/8 The absolute maximum value of f on [-2, 1/2] is 2 at x = -1. The absolute minimum value is -1 at x = -2.
Example 2
Find the absolute extrema of f(x) = (x - 2)^(2/3) on [1, 5]
Since f is continuous on [1, 5], the extreme value theorem is applicable. f'(x) = 2 / [3(x - 2)^(1/3)] There is no value of x for which f'(x) = 0. However, f'(x) does not exist at x = 2, so 2 is a critical point. The absolute extrema occur either at 2 or at endpoints.
📌 Example: f(1) = 1, f(2) = 0, f(5) = 9^(1/3) ≈ 2.08 Absolute minimum value on [1,5] is 0 at x = 2. Absolute maximum value is 9^(1/3) at x = 5.
Example 3
Find the absolute extrema of h(x) = x^(2/3) on [-2, 3]
h'(x) = (2/3)x^(-1/3) = 2 / (3x^(1/3)) h'(x) has no zeros but is undefined at x = 0, which is a critical point.
📌 Example: h(0) = 0, h(-2) = (-2)^(2/3) = 4^(1/3), h(3) = 3^(2/3) = 9^(1/3) Absolute maximum value is 9^(1/3) at x = 3. Absolute minimum is 0 at x = 0.
How to Find the Absolute Extrema of a Continuous Function f of Two Variables on a Closed and Bounded Region R
Step 1: Find the critical points of f that lie in the interior of R (where f_x = 0 and f_y = 0, or one does not exist).
Step 2: Find all boundary points at which the absolute extrema can occur. This involves treating each boundary segment separately, reducing the function to a single variable.
Step 3: Evaluate f(x,y) at the points obtained in the previous steps. The largest of these values is the absolute maximum and the smallest the absolute minimum.
💡 Why this matters: This extends the single-variable method to two dimensions, where the boundary is more complex and must be analyzed piece by piece.
Example 4
Find the absolute maximum and minimum value of f(x,y) = 2 + 2x + 2y - x² - y² on the triangular plate in the first quadrant bounded by the lines x=0, y=0, y=9-x
For interior points: f_x = 2 - 2x = 0 → x = 1; f_y = 2 - 2y = 0 → y = 1. Critical point: (1,1).
For boundary points – three segments:
-
On OA (y=0): U(x) = f(x,0) = 2 + 2x - x², 0 ≤ x ≤ 9. U'(x) = 2 - 2x = 0 → x = 1. Points: (0,0), (9,0), (1,0).
-
On OB (x=0): V(y) = f(0,y) = 2 + 2y - y², 0 ≤ y ≤ 9. By symmetry, critical at y = 1. Points: (0,0), (0,9), (0,1).
-
On AB (y = 9 - x): W(x) = f(x, 9-x) = 2 + 2x + 2(9-x) - x² - (9-x)² = -61 + 18x - 2x². W'(x) = 18 - 4x = 0 → x = 9/2. Then y = 9 - 9/2 = 9/2. Point: (9/2, 9/2).
📌 Example – Evaluation table:
| (x, y) | f(x,y) |
|---|---|
| (0,0) | 2 |
| (9,0) | -61 |
| (1,0) | 3 |
| (9/2, 9/2) | -41/2 |
| (0,9) | -61 |
| (0,1) | 3 |
| (1,1) | 4 |
The absolute maximum is 4 at (1,1). The absolute minimum is -61 at (0,9) and (9,0).
Example 5
Find the absolute maximum and minimum values of f(x,y) = 3xy - 6x - 3y + 7 on the closed triangular region R with vertices (0,0), (3,0), (0,5)
For interior critical points: f_x = 3y - 6 = 0 → y = 2; f_y = 3x - 3 = 0 → x = 1. Critical point: (1,2) inside R.
Boundary analysis:
i) Segment (0,0) to (3,0), y=0: u(x) = f(x,0) = -6x + 7, 0 < x < 3. u'(x) = -6 (no critical points). Endpoints: (0,0) and (3,0).
ii) Segment (0,0) to (0,5), x=0: v(y) = f(0,y) = -3y + 7, 0 < y < 5. v'(y) = -3 (no critical points). Endpoints: (0,0) and (0,5).
iii) Segment (3,0) to (0,5): y = -5/3 x + 5, 0 < x < 3. w(x) = f(x, -5/3 x + 5) = -5x² + 14x - 8, 0 < x < 3. w'(x) = -10x + 14 = 0 → x = 7/5. Then y = -5/3(7/5) + 5 = 8/3. Point: (7/5, 8/3).
📌 Example – Evaluation table:
| (x, y) | f(x,y) |
|---|---|
| (0,0) | 7 |
| (3,0) | -11 |
| (0,5) | -8 |
| (7/5, 8/3) | -9/5 |
| (1,2) | 1 |
The absolute maximum value is f(0,0) = 7. The absolute minimum value is f(3,0) = -11.
⭐ Key Takeaways
The Extreme Value Theorem guarantees that continuous functions on closed intervals have both absolute maxima and minima. To find these values, one must evaluate the function at all critical points (where the derivative is zero or undefined) and at the endpoints of the interval; the largest value is the absolute maximum and the smallest is the absolute minimum. For two-variable functions on closed and bounded regions, the same logic applies but requires finding interior critical points and analyzing each boundary segment separately by reducing to a single-variable function. The procedure requires systematically checking all candidate points — including interior critical points, boundary critical points, and vertices — and comparing function values to identify the absolute extrema.
🧠 Quick Revision Questions
- What does the Extreme Value Theorem guarantee about a continuous function on a closed interval?
- What is the three-step procedure for finding absolute extrema of a single-variable function on a closed interval?
- How do you identify critical points for a function of two variables on a closed region?
- In Example 5, why were there no critical points on the boundary segments y=0 and x=0?
- What is the absolute maximum and minimum of f(x,y) = 2 + 2x + 2y - x² - y² on the triangular region bounded by x=0, y=0, and y=9-x?
📘 Lecture 17 — Examples
📖 Overview: This lecture focuses on applying optimization techniques for functions of several variables to solve practical problems. It demonstrates how to find absolute extrema on closed bounded regions and how to solve constrained optimization problems by reducing them to functions of two variables, reinforcing the use of second derivative tests.
🗂️ Topics Covered
The lecture covers examples of finding absolute maximum and minimum values of a function on a closed triangular region by analyzing interior critical points and boundary line segments. It then presents several constrained optimization problems, including maximizing the product of three numbers given a fixed sum, minimizing the sum of squares, and optimizing the dimensions of rectangular boxes inscribed in spheres or made from materials with different costs. The lecture also covers finding maximum values of functions on planes in the first octant.
📝 Lecture Summary
EXAMPLE
Find the absolute maximum and minimum values of f(x,y) = xy - x - 3y on the closed triangular region R with vertices (0, 0), (0, 4), and (5, 0).
To find the absolute extrema on a closed bounded region, we must check both critical points in the interior and points on the boundary.
First, find the critical points of f(x,y) = xy - x - 3y.
- f_x(x,y) = y - 1
- f_y(x,y) = x - 3
Setting f_x = 0 and f_y = 0 gives y = 1 and x = 3. Thus, (3, 1) is the only critical point in the interior of R.
Next, analyze the three boundary line segments: (i) Line segment between (0,0) and (5,0): On this segment, y = 0, so the function simplifies to u(x) = f(x,0) = -x for 0 ≤ x ≤ 5. u'(x) = -1 is never zero, so extreme values occur at the endpoints x = 0 (point (0,0)) and x = 5 (point (5,0)).
(ii) Line segment between (0,0) and (0,4): On this segment, x = 0, so the function simplifies to v(y) = f(0,y) = -3y for 0 ≤ y ≤ 4. v'(y) = -3 is never zero, so extreme values occur at endpoints y = 0 (point (0,0)) and y = 4 (point (0,4)).
(iii) Line segment between (5,0) and (0,4): The equation of this line is y = -(4/5)x + 4 for 0 ≤ x ≤ 5. Substituting into f gives: w(x) = f(x, -(4/5)x + 4) = -(4/5)x² + (27/5)x - 12. Setting w'(x) = -(8/5)x + (27/5) = 0 gives x = 27/8. This critical point corresponds to the point (27/8, 13/10).
Finally, evaluate f(x,y) at all candidate points: (0,0), (5,0), (0,4), (27/8, 13/10), and (3,1).
- f(0,0) = 0
- f(5,0) = -5
- f(0,4) = -12
- f(27/8, 13/10) = -231/80
- f(3,1) = -3
📌 Example: The absolute maximum value of f is f(0,0) = 0, and the absolute minimum value is f(0,4) = -12.
EXAMPLE
Find three positive numbers whose sum is 48 and such that their product is as large as possible.
Let the numbers be x, y, and z. The constraint is x + y + z = 48, so z = 48 - x - y. The product function to maximize is: P(x, y) = xy(48 - x - y) = 48xy - x²y - xy².
Find critical points:
- P_x = 48y - 2xy - y²
- P_y = 48x - 2xy - x²
Setting P_x = 0 and P_y = 0, we solve the system:
- y(48 - 2x - y) = 0
- x(48 - x - 2y) = 0 Since positive numbers are required (x, y > 0), we have 48 - 2x - y = 0 and 48 - x - 2y = 0. Solving these gives x = 16, y = 16, and therefore z = 48 - 16 - 16 = 16.
Apply the Second Derivative Test:
- P_xx(x,y) = -2y ⇒ P_xx(16,16) = -32
- P_yy(x,y) = -2x ⇒ P_yy(16,16) = -32
- P_xy(x,y) = 48 - 2x - 2y ⇒ P_xy(16,16) = -16
Compute D = P_xx(16,16)·P_yy(16,16) - [P_xy(16,16)]² = (-32)(-32) - (-16)² = 1024 - 256 = 768 > 0. Since P_xx(16,16) = -32 < 0, the function has a maximum at (16,16).
📌 Example: The required three positive numbers are 16, 16, 16.
EXAMPLE
Find three positive numbers whose sum is 27 and such that the sum of their squares is as small as possible.
Let the numbers be x, y, and z. The constraint is x + y + z = 27, so z = 27 - x - y. The function to minimize is the sum of squares: S(x, y) = x² + y² + (27 - x - y)² = x² + y² + 729 - 54x - 54y + 2xy + x² + y² = 2x² + 2y² - 54x - 54y + 2xy + 729.
Find critical points:
- S_x = 4x + 2y - 54
- S_y = 2x + 4y - 54
Setting S_x = 0 and S_y = 0, we solve the system:
- 4x + 2y = 54
- 2x + 4y = 54 Solving gives x = 9, y = 9, and therefore z = 27 - 9 - 9 = 9.
Apply the Second Derivative Test:
- S_xx(x,y) = 4
- S_yy(x,y) = 4
- S_xy(x,y) = 2
D = (4)(4) - (2)² = 16 - 4 = 12 > 0. Since S_xx = 4 > 0, the function has a minimum at (9,9).
📌 Example: The required three positive numbers are 9, 9, 9.
EXAMPLE
Find the dimensions of the rectangular box of maximum volume that can be inscribed in a sphere of radius 4.
Let the dimensions of the box be x, y, and z. The volume is V = xyz. Since the box is inscribed in a sphere of radius 4, the box's vertices lie on the sphere x² + y² + z² = 16. From this, we get z = √(16 - x² - y²).
The volume function to maximize is V(x, y) = xy√(16 - x² - y²).
Find critical points by setting V_x = 0 and V_y = 0: V_x = y√(16 - x² - y²) + xy * [(-2x) / (2√(16 - x² - y²))] = y√(16 - x² - y²) - (x²y) / √(16 - x² - y²)
Setting V_x = 0: y [ (16 - x² - y²) - x² ] / √(16 - x² - y²) = 0 ⇒ y(16 - 2x² - y²) = 0. Since y ≠ 0 for a nonzero box, we have 2x² + y² = 16 ... (a)
V_y = x√(16 - x² - y²) - (xy²) / √(16 - x² - y²) Setting V_y = 0: x(16 - x² - 2y²) = 0 ⇒ x² + 2y² = 16 ... (b)
Solving (a) and (b): Subtract (b) from (a): (2x² + y²) - (x² + 2y²) = 0 ⇒ x² - y² = 0 ⇒ x = y. Substituting into (b): x² + 2x² = 16 ⇒ 3x² = 16 ⇒ x = 4/√3. So y = 4/√3. Then z = √(16 - (16/3) - (16/3)) = √(16/3) = 4/√3.
The Second Derivative Test confirms this gives a maximum. 💡 Why this matters: This proves that for a sphere of any radius, a cube inscribed in it has maximum volume.
📌 Example: The dimensions of the box of maximum volume are x = 4/√3, y = 4/√3, z = 4/√3.
EXAMPLE
A closed rectangular box with volume of 16 ft³ is made from two kinds of materials. The top and bottom are made of material costing Rs. 10 per square foot and the sides from material costing Rs.5 per square foot. Find the dimensions of the box so that the cost of materials is minimized.
Let length = x, width = y, height = z. The cost function is: Cost = Cost of top/bottom + Cost of four sides Top and bottom area = 2(xy), cost = 10 * 2xy = 20xy. Four sides area = 2(xz) + 2(yz), cost = 5 * (2xz + 2yz) = 10xz + 10yz. So, C = 20xy + 10xz + 10yz. This is the cost function to minimize.
The constraint is the constant volume: xyz = 16 ⇒ z = 16 / (xy). Substitute into the cost function: C(x, y) = 20xy + 10x * (16/xy) + 10y * (16/xy) = 20xy + 160/y + 160/x.
Find critical points:
- C_x = 20y - 160/x²
- C_y = 20x - 160/y²
Setting C_x = 0 and C_y = 0:
- 20y = 160/x² ⇒ y = 8/x²
- 20x = 160/y² ⇒ x = 8/y²
Substitute y = 8/x² into x = 8/y²: x = 8 / (8/x²)² = 8 / (64/x⁴) = x⁴/8. This gives x⁴ = 8x, so x(x³ - 8) = 0. Since x > 0, x³ = 8 ⇒ x = 2. Then y = 8/(2)² = y = 2. Finally, z = 16 / (2 * 2) = z = 4.
Apply the Second Derivative Test:
- C_xx = 320/x³ ⇒ C_xx(2,2) = 320/8 = 40
- C_yy = 320/y³ ⇒ C_yy(2,2) = 320/8 = 40
- C_xy = 20 ⇒ C_xy(2,2) = 20
D = (40)(40) - (20)² = 1600 - 400 = 1200 > 0. Since C_xx = 40 > 0, the function has a minimum at (2,2).
📌 Example: The dimensions that minimize cost are 2 ft × 2 ft × 4 ft.
EXAMPLE
Find the dimensions of the rectangular box of maximum volume that can be inscribed in a sphere of radius a.
This is a generalization of the earlier sphere problem where the radius was 4. The sphere equation is x² + y² + z² = a², so z = √(a² - x² - y²).
The volume function is V(x, y) = xy√(a² - x² - y²). Following the same procedure as before:
Setting V_x = 0 gives y(a² - 2x² - y²) = 0 ⇒ 2x² + y² = a² ... (a) Setting V_y = 0 gives x(a² - x² - 2y²) = 0 ⇒ x² + 2y² = a² ... (b)
Solving (a) and (b): Subtracting gives x² - y² = 0 ⇒ x = y. Substituting into (b): x² + 2x² = a² ⇒ 3x² = a² ⇒ x = a/√3. So y = a/√3, and z = √(a² - (a²/3) - (a²/3)) = √(a²/3) = a/√3.
The Second Derivative Test confirms this gives a maximum value for the volume. 💡 Why this matters: This demonstrates that regardless of the sphere's radius, the box of maximum volume inscribed within it is always a cube whose side length is the sphere's radius divided by √3.
📌 Example: The dimensions of the box are x = a/√3, y = a/√3, z = a/√3.
EXAMPLE
Find the points on the plane x + y + z = 5 in the first octant at which f(x,y,z) = xy²z² has maximum value.
Solution Method 1: Reduce to a function of y and z. From the plane equation, x = 5 - y - z. Substitute into f: u(y,z) = f(5-y-z, y, z) = (5 - y - z)y²z² = 5y²z² - y³z² - y²z³.
Find critical points:
- u_y = 10yz² - 3y²z² - 2yz³ = yz²(10 - 3y - 2z)
- u_z = 10y²z - 2y³z - 3y²z² = y²z(10 - 2y - 3z)
Since we are in the first octant (y>0, z>0), set (10 - 3y - 2z) = 0 and (10 - 2y - 3z) = 0. Solving this system: subtract the first equation from the second: (10-2y-3z) - (10-3y-2z) = 0 ⇒ y - z = 0 ⇒ y = z. Then 10 - 3y - 2y = 0 ⇒ 10 - 5y = 0 ⇒ y = 2, z = 2. Then x = 5 - 2 - 2 = 1.
Apply the Second Derivative Test:
- u_yy = 10z² - 6yz² - 2z³ ⇒ u_yy(2,2) = 40 - 48 - 16 = -24
- u_zz = 10y² - 2y³ - 6y²z ⇒ u_zz(2,2) = 40 - 16 - 48 = -24
- u_yz = 20yz - 6y²z - 6yz² ⇒ u_yz(2,2) = 80 - 48 - 48 = -16
D = (-24)(-24) - (-16)² = 576 - 256 = 320 > 0. Since u_yy = -24 < 0, this is a maximum.
📌 Example: The point at which f has its maximum value is (1, 2, 2).
Solution Method 2: Reduce to a function of x and y. From the plane, z = 5 - x - y. f(x,y) = xy²(5 - x - y)².
Find critical points by setting f_x = 0 and f_y = 0. The calculations are more involved but lead to the same solution: x = 1, y = 2, z = 2.
⭐ Key Takeaways
To solve optimization problems for functions of two or three variables, you must first reduce the problem to a function of two variables using any given constraints. The critical points of this reduced function are then found by setting its first partial derivatives to zero. The Second Derivative Test, which involves computing D = f_xx·f_yy - (f_xy)², is essential to classify these critical points as maxima, minima, or saddle points, where D > 0 and f_xx < 0 indicates a maximum and D > 0 and f_xx > 0 indicates a minimum. For absolute extrema on a closed bounded region, you must also evaluate the function on all boundary segments, including their endpoints.
🧠 Quick Revision Questions
- What are the steps to find the absolute maxima and minima of a function on a closed triangular region?
- For the product maximization problem with sum 48, what system of equations must be solved to find the critical point, and what is the final result?
- For the cost minimization problem of a box with fixed volume, how is the constraint used to reduce the cost function to two variables?
- For a rectangular box inscribed in a sphere of radius 'a', what is the relationship between the dimensions at the maximum volume?
- For the function f(x,y,z) = xy²z² on the plane x+y+z=5, what is the single critical point that gives a maximum, and what is D at that point?
📘 Lecture 18 — Revision of Integration
📖 Overview: This lecture provides a comprehensive review of integration concepts, focusing on double integrals over rectangular regions. It demonstrates how to evaluate double integrals using iterated or repeated integrals and establishes the key theorem that the order of integration does not matter for continuous functions over a rectangle, which simplifies computation.
🗂️ Topics Covered
Revision of single integration with respect to x and y separately, introduction to double integrals for finding volume under a surface, evaluation of double integrals using iterated integrals in both orders (dxdy and dydx), the theorem showing order of integration does not affect the result for continuous functions over rectangles, and worked examples including exponential functions using properties of e and ln.
📝 Lecture Summary
Revision of Integration
The lecture begins by revisiting single integration with respect to one variable while treating the other as constant. For example, integrating (xy + y²) with respect to x from 0 to 1 treats y as constant, yielding y/2 + y². Integrating the same expression with respect to y from 0 to 1 treats x as constant, yielding x/2 + 1/3.
📌 Example 1: Consider ∫₀¹ (xy + y²)dx. Here y is treated as constant, so ∫₀¹ xy dx + ∫₀¹ y² dx = y(1/2) + y². Result: y/2 + y²
📌 Example 2: Consider ∫₀¹ (xy + y²)dy. Here x is treated as constant, so x∫₀¹ y dy + ∫₀¹ y² dy = x(1/2) + 1/3. Result: x/2 + 1/3
Double Integral
Symbolically, the double integral of two variables x and y over a certain region R of the plane is denoted by ∬ᵣ f(x, y) dxdy.
📌 Example: Use a double integral to find the solid bounded above by the plane Z = 4 – x – y and below by the rectangle R = {(x, y): 0 ≤ x ≤ 1, 0 ≤ y ≤ 2}.
Solution: The volume V = ∬ᵣ (4 – x – y) dA
Evaluating: V = ∫₀² ∫₀¹ (4 – x – y) dx dy
First integrate with respect to x: ∫₀¹ (4 – x – y) dx = [4x – x²/2 – xy] from x=0 to x=1 = 4(1) – (1)²/2 – 1(y) – [0] = 4 – 1/2 – y = 7/2 – y
Then integrate with respect to y: ∫₀² (7/2 – y) dy = [7y/2 – y²/2] from y=0 to y=2 = (7(2)/2 – (2)²/2) – 0 = (14/2 – 4/2) = 7 – 2 = 5
Result: V = 5
📌 Example: Evaluate the double integral ∫₀¹ ∫₀¹ (xy + y²) dx dy
First integrate with respect to x: ∫₀¹ (xy + y²) dx = [x²y/2 + xy²] from x=0 to x=1 = (1²y/2 + 1y²) – 0 = y/2 + y²
Then integrate with respect to y: ∫₀¹ (y/2 + y²) dy = [y²/4 + y³/3] from y=0 to y=1 = (1/4 + 1/3) – 0 = (3/12 + 4/12) = 7/12
Iterated or Repeated Integral
The expression ∫ᶜᵈ [∫ₐᵇ f(x, y) dx] dy is called an iterated or repeated integral. Often the brackets are omitted and this expression is written as ∫ᶜᵈ ∫ₐᵇ f(x, y) dx dy. Here, ∫ₐᵇ f(x, y) dx yields a function of y, which is then integrated over the interval c ≤ y ≤ d.
Similarly, ∫ₐᵇ ∫ᶜᵈ f(x, y) dy dx = ∫ₐᵇ [∫ᶜᵈ f(x, y) dy] dx. Here, ∫ᶜᵈ f(x, y) dy yields a function of x, which is then integrated over the interval a ≤ x ≤ b.
📌 Example: Evaluate the integral ∫₀¹ ∫₀² (x + 3) dy dx
First integrate with respect to y: ∫₀² (x + 3) dy = (x + 3)[y] from y=0 to y=2 = (x + 3)(2 – 0) = 2(x + 3)
Then integrate with respect to x: ∫₀¹ 2(x + 3) dx = 2[x²/2 + 3x] from x=0 to x=1 = 2[(1/2 + 3) – 0] = 2(1/2 + 3) = 2(7/2) = 7
Now change the order: ∫₀² ∫₀¹ (x + 3) dx dy
First integrate with respect to x: ∫₀¹ (x + 3) dx = [x²/2 + 3x] from x=0 to x=1 = (1/2 + 3) – 0 = 7/2
Then integrate with respect to y: ∫₀² (7/2) dy = (7/2)[y] from y=0 to y=2 = (7/2)(2 – 0) = 7
Note: The value remains the same when the order of integration is changed.
Theorem
Let R be the rectangle defined by the inequalities a < x < b and c < y < d. If f(x, y) is continuous on this rectangle, then:
∬ᵣ f(x, y) dA = ∫ᶜᵈ ∫ₐᵇ f(x, y) dx dy = ∫ₐᵇ ∫ᶜᵈ f(x, y) dy dx
💡 Why this matters: This powerful theorem enables us to evaluate a double integral over a rectangle by calculating an iterated integral. Moreover, the theorem tells us that the order of integration in the iterated integral does not matter — we can choose whichever order is easier.
📌 Example: Evaluate the integral ∫₀^(ln 2) ∫₀^(ln 3) e^(x+y) dx dy
Note that e^(x+y) = eˣ · eʸ
First integrate with respect to x: ∫₀^(ln 3) eˣ·eʸ dx = eʸ[eˣ] from x=0 to x=ln 3 = eʸ(e^(ln 3) – e⁰) = eʸ(3 – 1) = 2eʸ (Since e^(ln 3) = 3)
Then integrate with respect to y: ∫₀^(ln 2) 2eʸ dy = 2[eʸ] from y=0 to y=ln 2 = 2(e^(ln 2) – e⁰) = 2(2 – 1) = 2 (Since e^(ln 2) = 2)
Result: 2
📌 Example: Evaluate the integral ∫₀^(ln 3) ∫₀^(ln 2) e^(x+y) dy dx (order changed)
First integrate with respect to y: ∫₀^(ln 2) eˣ·eʸ dy = eˣ[eʸ] from y=0 to y=ln 2 = eˣ(e^(ln 2) – e⁰) = eˣ(2 – 1) = eˣ
Then integrate with respect to x: ∫₀^(ln 3) eˣ dx = [eˣ] from x=0 to x=ln 3 = e^(ln 3) – e⁰ = 3 – 1 = 2
Note that in both cases the integral has the same value of 2.
⭐ Key Takeaways
A double integral ∬ᵣ f(x, y) dA over a rectangle R can be evaluated as an iterated integral by integrating with respect to one variable at a time while treating the other as constant. The order of integration (dx dy or dy dx) does not matter for continuous functions over a rectangle, due to the powerful Fubini-type theorem demonstrated. The properties of exponential and natural logarithmic functions as inverse functions (e^(ln k) = k) can simplify integrals involving e^(x+y). The evaluation of double integrals requires careful application of single-variable integration techniques and proper substitution of limits.
🧠 Quick Revision Questions
- What is the difference between a double integral and an iterated integral?
- If you integrate f(x, y) with respect to x first (holding y constant), what kind of function do you get before integrating with respect to y?
- Evaluate the double integral ∫₀³ ∫₀¹ (2x + y) dx dy.
- Why does the order of integration not matter for a continuous function over a rectangle?
- Explain why e^(x+y) can be written as eˣ·eʸ and show how this property is used in double integration.