📘 Lecture 23 — Polar Coordinate Systems
📖 Overview: This lecture introduces the polar coordinate system as an alternative to the rectangular (Cartesian) coordinate system for describing points in a plane. It covers the fundamental definitions, the non-uniqueness of polar coordinates, negative radial distances, conversion formulas between polar and rectangular coordinates, and the equations of lines and circles in polar form.
🗂️ Topics Covered
The lecture begins by defining the polar coordinate system with its origin (pole) and polar axis, and introduces the concepts of radial distance and polar angle. It then discusses the non-uniqueness of polar coordinates and the special definition for negative values of r, including their geometric interpretation. The relationship between polar and rectangular coordinates is established through conversion formulas, followed by examples. The lecture concludes with the derivation of equations for lines and circles in polar coordinates, including several special cases.
📝 Lecture Summary
POLAR COORDINATE SYSTEMS
To form a polar coordinate system in a plane, we pick a fixed point O, called the origin or pole, and using the origin as an endpoint we construct a ray, called the polar axis. After selecting a unit of measurement, we may associate with any point P in the plane a pair of polar coordinates (r, θ), where r is the distance from P to the origin and θ measures the angle from the polar axis to the line segment OP. The number r is called the radial distance of P and θ is called a polar angle of P. Points like (6, 45°), (3, 225°), (5, 120°), and (4, 330°) are plotted in polar coordinate systems.
🔑 Definition — Polar Coordinates: A point P is represented by (r, θ), where r is the distance from the pole and θ is the angle measured from the polar axis.
THE POLAR COORDINATES OF A POINT ARE NOT UNIQUE
For example, the polar coordinates (1, 315°), (1, −45°), and (1, 675°) all represent the same point. In general, if a point P has polar coordinate (r, θ), then for any integer n = 0, 1, 2, 3, ..., (r, θ + n·360°) and (r, θ − n·360°) are also polar coordinates of P. In the case where P is the origin, the line segment OP reduces to a point, since r = 0. In this case, we will agree that an arbitrary polar angle may be used. Thus, for every θ, the point (0, θ) is the origin.
NEGATIVE VALUES OF R
When graphing curves in polar coordinates, it will be desirable to allow negative values for r. For motivation, consider point P with polar coordinates (3, 225°). We can reach this point by rotating the polar axis 225° and then moving forward from the origin 3 units along the terminal side of the angle. Alternatively, we can reach the same point P by rotating the polar axis 45° and then moving backward 3 units from the origin along the extension of the terminal side of the angle. This suggests that the point (3, 225°) might also be denoted by (−3, 45°), with the minus sign serving to indicate that the point is on the extension of the angle's terminal side rather than on the terminal side itself.
Since the terminal side of the angle θ + 180° is the extension of the terminal side of angle θ, we define: (-r, θ) and (r, θ + 180°) to be polar coordinates for the same point.
RELATION BETWEEN POLAR AND RECTANGULAR COORDINATES
CONVERSION FORMULA FROM POLAR TO CARTESIAN COORDINATES AND VICE VERSA
The key relationships are:
- x = r cos θ
- y = r sin θ
- x² + y² = r²
- y/x = tan θ (for x ≠ 0)
Example: Find the rectangular coordinates of the point P whose polar coordinates are (6, 135°) Solution: Substituting r = 6 and θ = 135° in x = r cos θ and y = r sin θ yields:
- x = 6 cos 135° = 6 (−√2/2) = −3√2
- y = 6 sin 135° = 6 (√2/2) = 3√2 Thus, the rectangular coordinates of the point P are (−3√2, 3√2).
Example: Find polar coordinates of the point P whose rectangular coordinates are (−2, 2√3) Solution: Find polar coordinates (r, θ) such that r > 0 and 0 ≤ θ ≤ 2π.
- r = √(x² + y²) = √((−2)² + (2√3)²) = √(4 + 12) = √16 = 4
- tan θ = y/x = 2√3 / (−2) = −√3, so θ = tan⁻¹(−√3) = 2π/3 (since (−2, 2√3) lies in the second quadrant) All other polar coordinates of P have the form (4, 2π/3 + 2nπ) or (−4, 5π/3 + 2nπ), where n is an integer.
LINES IN POLAR COORDINATES
A line perpendicular to the x-axis and passing through the point with xy-coordinates (a, 0) has the equation x = a. To express this in polar coordinates, substitute x = r cos θ, giving r cos θ = a. This makes sense geometrically since each point P(r, θ) on this line will yield the value a for r cos θ.
A line parallel to the x-axis that meets the y-axis at point (0, b) has the equation y = b. Substituting y = r sin θ yields r sin θ = b as the polar equation of this line. Each point P(r, θ) on this line will yield the value b for r sin θ.
For any constant θ₀, the equation θ = θ₀ is satisfied by the coordinates of all points of the form P(r, θ₀), regardless of the value of r. Thus, the equation represents the line through the origin making an angle of θ₀ (radians) with the polar axis.
By substituting x = r cos θ and y = r sin θ in the equation Ax + By + C = 0, we obtain the general polar form of the line: r (A cos θ + B sin θ) + C = 0.
CIRCLES IN POLAR COORDINATES
To find the polar equation of a circle whose radius is a and whose center has polar coordinates (r₀, θ₀), let P(r, θ) be an arbitrary point on the circle. Applying the law of cosines to triangle OCP gives: r² − 2rr₀ cos(θ − θ₀) + r₀² = a².
SOME SPECIAL CASES OF EQUATION OF CIRCLE IN POLAR COORDINATES A circle of radius a, centered at the origin, has an especially simple polar equation. If we let r₀ = 0 in the general equation, we obtain r² = a² or, since a > 0, r = a. This makes sense geometrically since the circle of radius a, centered at the origin, consists of all points P(r, θ) for which r = a, regardless of the value of θ.
If a circle of radius a has its center on the x-axis and passes through the origin, then the polar coordinates of the center are either (a, 0) or (a, π), depending on whether the center is to the right or left of the origin.
⭐ Key Takeaways
Polar coordinates are not unique; a single point can be represented by many different (r, θ) pairs. The conversion between polar and rectangular coordinates is essential: x = r cos θ, y = r sin θ, r² = x² + y², and tan θ = y/x. A negative radial distance means the point lies on the extension of the terminal side of the angle. Lines in polar coordinates are represented by r cos θ = a (vertical) or r sin θ = b (horizontal), while circles centered at the origin simplify to r = a. The general equation of a circle in polar form involves the law of cosines.
🧠 Quick Revision Questions
- Why are the polar coordinates of a point not unique? Give an example.
- How do you find the rectangular coordinates of a point given its polar coordinates (r, θ)?
- What is the geometric interpretation of a point with a negative radial distance, e.g., (−3, 45°)?
- What is the polar equation of a line passing through the origin making an angle θ₀ with the polar axis?
- Derive the general polar equation of a circle with radius a and center at (r₀, θ₀).
📘 Lecture 25 — Double integrals in polar co-ordinates
📖 Overview: This lecture introduces double integrals in polar coordinates, which are essential for evaluating integrals over circular or radial regions and for simplifying many double integrals that are difficult in rectangular coordinates. It covers the derivation of polar double integrals, how to find limits of integration from a sketch, and multiple worked examples including area calculations and conversions from Cartesian integrals.
🗂️ Topics Covered
The lecture begins by explaining why polar coordinates are important for double integrals and introduces the concept of a "polar rectangle." It then provides the general formula for double integrals in polar coordinates and step-by-step instructions for determining limits of integration from a sketch. Several examples follow, including integration over cardioid and circle regions, finding area of a three-petaled rose and a lemniscate, and converting Cartesian integrals into polar integrals with multiple worked examples.
📝 Lecture Summary
Double integrals in polar coordinates
When we defined the double integral of a function over a region R in the xy-plane, we began by cutting R into rectangles whose sides were parallel to the coordinate axes. In polar coordinates, the natural shape is a polar rectangle whose sides have constant r and θ-values.
Suppose that a function f(r, θ) is defined over a region R that is bounded by the ray θ = α and θ = β and by the continuous curves r = r₁(θ) and r = r₂(θ). Suppose also that 0 ≤ r₁(θ) ≤ r₂(θ) ≤ a for every value of θ between α and β. Then R lies in a fan-shaped region Q defined by the inequalities 0 ≤ r ≤ a and α ≤ θ ≤ β.
The double integral in polar coordinates is given as: ∬ᵣ f(r, θ) dA = ∫{θ=α}^{θ=β} ∫{r=r₁(θ)}^{r=r₂(θ)} f(r, θ) dr dθ
How to find limits of integration from sketch
Step 1. Since θ is held fixed for the first integration, draw a radial line from the origin through the region R at a fixed angle θ. This line crosses the boundary of R at most twice. The innermost point of intersection is on the curve r = r₁(θ) and the outermost point is on the curve r = r₂(θ). These intersections determine the r-limits of integration.
Step 2. Imagine rotating a ray along the positive x-axis one revolution counterclockwise about the origin. The smallest angle at which this ray intersects the region R is θ = α and the largest angle is θ = β. This yields the θ-limits of the integration.
🔑 Definition — Polar rectangle: a region whose sides have constant r and θ-values, used as the natural shape for partitioning in polar coordinates.
Example: Find the limits of integration for integrating f(r, θ) over the region R that lies inside the cardioid r = 1 + cos θ and outside the circle r = 1.
Solution: Step 1. We sketch the region and label the bounding curves. Step 2. The r-limits of integration. A typical ray from the origin enters R where r = 1 and leaves where r = 1 + cos θ. Step 3. The θ-limits of integration. The rays from the origin that intersect R run from θ = -π/2 to θ = π/2.
The integral is: ∫{-π/2}^{π/2} ∫{1}^{1+cos θ} f(r, θ) r dr dθ = 2∫{0}^{π/2} ∫{1}^{1+cos θ} f(r, θ) r dr dθ
Example: Evaluate ∬ᵣ sin θ dA where R is the region in the first quadrant that is outside the circle r = 2 and inside the cardioid r = 2(1+cos θ).
Solution: ∬ᵣ sin θ dA = ∫{0}^{π/2} ∫{2}^{2(1+cos θ)} (sin θ) r dr dθ = ∫{0}^{π/2} [(r²/2) sin θ]{r=2}^{r=2(1+cos θ)} dθ = 2∫{0}^{π/2} [(1+cos θ)² sin θ − sin θ] dθ = 2[−(1+cos θ)³/3 + cos θ]{0}^{π/2} = 8/3
💡 Why this matters: The polar form allows integration over curved regions that would be very complex in Cartesian coordinates, with the integration limits following naturally from the geometry.
Area using double polar integrals
The area of a region can be found using the double polar integral: A = ∬ dA
Example: Use a double polar integral to find the area enclosed by the three-petaled rose r = sin 3θ. We calculate the area of the petal R in the first quadrant and multiply by three.
Solution: A = 3∬ᵣ dA = 3∫{0}^{π/3} ∫{0}^{sin 3θ} r dr dθ = 3∫{0}^{π/3} [(r²/2)]{0}^{sin 3θ} dθ = (3/2)∫{0}^{π/3} sin²(3θ) dθ = (3/2)∫{0}^{π/3} (1−cos 6θ)/2 dθ = (3/4)[θ − (sin 6θ)/6]_{0}^{π/3} = π/4
Example: Find the area enclosed by the lemniscate r² = 4 cos 2θ. The total area is four times the first-quadrant portion.
Solution: A = 4∫{0}^{π/4} ∫{0}^{√(4 cos 2θ)} r dr dθ = 4∫{0}^{π/4} [r²/2]{0}^{√(4 cos 2θ)} dθ = 4∫{0}^{π/4} 2 cos 2θ dθ = 4[sin 2θ]{0}^{π/4} = 4
📐 Formula — Area in polar coordinates: A = ∬ dA = ∫∫ r dr dθ
Changing Cartesian integrals into polar integrals
The procedure for changing a Cartesian integral ∬ᵣ f(x, y) dx dy into a polar integral has two steps.
Step 1. Substitute x = r cos θ and y = r sin θ, and replace dx dy by r dr dθ in the Cartesian integral. Step 2. Supply polar limits of integration for the boundary of R.
The Cartesian integral then becomes: ∬ᵣ f(x, y) dx dy = ∬₉ f(r cos θ, r sin θ) r dr dθ where G denotes the region of integration in polar coordinates.
Notice that dx dy is not replaced by dr dθ but by r dr dθ.
🔑 Definition — r dr dθ: The area element in polar coordinates, which accounts for the fact that polar rectangles have area proportional to r.
Example: Evaluate ∫{0}^{1} ∫{0}^{√(1−x²)} (x² + y²) dy dx by changing to polar coordinates.
Solution: The region of integration is bounded by 0 ≤ y ≤ √(1−x²) and 0 ≤ x ≤ 1. y = √(1−x²) is the circle x² + y² = 1, so r = 1.
On changing into polar coordinates, the given integral is: ∫{0}^{π/2} ∫{0}^{1} r³ dr dθ = ∫{0}^{π/2} [r⁴/4]{0}^{1} dθ = ∫{0}^{π/2} (1/4) dθ = [θ/4]{0}^{π/2} = π/8
Example: Evaluate I = ∬ᴰ (dx dy)/(x² + y²) by changing to polar coordinates, where D is the region in the first quadrant between the circles x² + y² = a² and x² + y² = b², 0 < a < b.
Solution: I = ∫{0}^{π/2} ∫{a}^{b} (r dr dθ)/(r²) = ∫{0}^{π/2} ∫{a}^{b} (1/r) dr dθ = ∫{0}^{π/2} [ln r]{a}^{b} dθ = ∫{0}^{π/2} ln(b/a) dθ = [θ ln(b/a)]{0}^{π/2} = (π/2) ln(b/a)
Example: Evaluate ∫{0}^{1} ∫{0}^{√(1−x²)} (x² + y²) dy dx by changing to polar coordinates.
Solution: The region of integration is bounded by 0 ≤ y ≤ √(1−x²) and 0 ≤ x ≤ 1. y = √(1−x²) is the circle x² + y² = 1, r = 1.
On changing into polar coordinates, the given integral is: ∫{0}^{π/2} ∫{0}^{1} r³ dr dθ = ∫{0}^{π/2} [r⁴/4]{0}^{1} dθ = ∫{0}^{π/2} (1/4) dθ = [θ/4]{0}^{π/2} = π/8
⭐ Key Takeaways
The most critical concept is that when converting from Cartesian to polar coordinates, dx dy is replaced by r dr dθ — the extra factor of r accounts for the stretching of area elements away from the origin. For setting up polar double integrals, the inner integration is always with respect to r (from the inner boundary curve to the outer boundary curve) and the outer integration is with respect to θ (from the smallest to largest angle intersecting the region). When finding areas, the integrand becomes simply r dr dθ since area = ∬ dA. Many complicated Cartesian integrals over circular regions become much simpler in polar form, especially those involving x² + y² terms which become r².
🧠 Quick Revision Questions
- What is the area element dA in polar coordinates, and why does it include the factor r?
- How do you determine the limits of integration for r and θ from a sketch of the region?
- When converting a Cartesian integral to polar form, what substitutions are made for x, y, and dx dy?
- Using a double polar integral, find the area enclosed by the cardioid r = 1 + cos θ.
- Evaluate ∫{0}^{1} ∫{0}^{√(1−x²)} (x² + y²)³/² dy dx by converting to polar coordinates.
📘 Lecture 26 — Examples
📖 Overview: This lecture demonstrates the application of double and triple integration techniques through several worked examples. It focuses on changing integration variables to polar coordinates to evaluate otherwise intractable integrals, including a proof of the Gaussian integral, and introduces the evaluation of triple integrals over rectangular and more complex regions. These examples are crucial for mastering multivariable integration for exams.
🗂️ Topics Covered
The lecture covers the evaluation of double integrals by changing to polar coordinates for regions like circles and semicircles, including handling improper integrals over the entire plane. It provides a proof that the integral of exp(-t²) from 0 to ∞ equals √π/2. It then introduces the theorems for triple integration over rectangular boxes, followed by examples evaluating triple integrals over rectangular and more general regions defined by variable limits.
📝 Lecture Summary
Example 1: Evaluating I = ∫∫ (x² + y²) dx dy by changing into polar coordinates
The region of integration is bounded by 0 < x < √(4y — y²) and 0 < y < 4. The curve x = √(4y — y²) represents the right half of the circle x² + y² — 4y = 0, which is equivalent to x² + (y — 2)² = 4. In polar coordinates, this becomes r² = 4r sin θ, or r = 4 sin θ.
💡 Why this matters: Changing to polar coordinates simplifies the integrand x² + y², which becomes r², and the area element dx dy becomes r dr dθ.
Changing the integral to polar coordinates, we have: I = ∫ (from θ=0 to π/2) ∫ (from r=0 to 4 sin θ) r² . r dr dθ = ∫ (from 0 to π/2) [r⁴/4] (from 0 to 4 sin θ) dθ = ∫ (from 0 to π/2) (64 sin⁴ θ) / 4 dθ = 16 ∫ (from 0 to π/2) sin⁴ θ dθ.
Using Walli’s formula: ∫ (from 0 to π/2) sin⁴ θ dθ = (3·1) / (4·2) · π/2 = 3π/16. 🔑 Definition — Walli's formula: A formula to evaluate definite integrals of powers of sine and cosine.
📐 Formula: ∫ (from 0 to π/2) sinⁿ θ dθ = [(n-1)(n-3)... / (n(n-2)...)] * π/2, for even n.
📌 Example: Here, n=4, so I = 16 * (3π/16) = 3π.
Example 2: Evaluating ∫∫ e^(x² + y²) dy dx over a semicircular region
The region R is the semicircular region bounded by the x-axis and the curve y = √(1 — x²). The integrand e^(x² + y²) is a nonelementary integral in Cartesian coordinates, meaning there is no direct way to integrate it with respect to either x or y.
Substituting x = r cos θ, y = r sin θ, and replacing dy dx by r dr dθ enables us to evaluate the integral. In polar coordinates, the semicircle is described by 0 < r < 1 and 0 < θ < π.
∫∫_R e^(x²+y²) dy dx = ∫ (θ=0 to π) ∫ (r=0 to 1) e^(r²) r dr dθ. The inner integral is: ∫ (0 to 1) e^(r²) r dr. Let u = r², du = 2r dr, so r dr = du/2. Then ∫ e^u (du/2) = (1/2) e^u = (1/2) e^(r²) evaluated from 0 to 1 = (1/2)(e — 1). The outer integral is: ∫ (0 to π) (1/2)(e — 1) dθ = (π/2)(e — 1).
Example 3: Evaluating the improper integral ∫∫_(-∞)^∞ e^(-(x²+y²)) dx dy
Let R_a be the region bounded by the circle x² + y² = a². The improper integral over the entire plane is defined as the limit over these circular disks: I = lim (a→∞)∫∫_{R_a} e^(-(x²+y²)) dx dy.
In polar coordinates, the region is 0 < r < a, 0 < θ < 2π. I = lim (a→∞) ∫ (θ=0 to 2π) ∫ (r=0 to a) e^(-r²) r dr dθ. The inner integral: ∫ (0 to a) e^(-r²) r dr = [-(1/2) e^(-r²)](from 0 to a) = (1/2)(1 — e^(-a²)). Then I = lim (a→∞) ∫ (0 to 2π) (1/2)(1 — e^(-a²)) dθ = lim (a→∞) (1/2)(1 — e^(-a²)) * 2π = π — lim (a→∞) π e^(-a²) = π.
Example 4: Proving ∫_0^∞ e^(-t²) dt = √π / 2
From the previous example, I = ∫∫(-∞)^∞ e^(-(x²+y²)) dx dy = π. This double integral can be expressed as a product of two single integrals because the integrand is separable: I = ∫(-∞)^∞ ∫(-∞)^∞ e^(-x²) e^(-y²) dx dy = [∫(-∞)^∞ e^(-x²) dx] [∫(-∞)^∞ e^(-y²) dy] = [∫(-∞)^∞ e^(-t²) dt]².
Therefore, [∫(-∞)^∞ e^(-t²) dt]² = π, so ∫(-∞)^∞ e^(-t²) dt = √π. Since the function e^(-t²) is even, we have ∫0^∞ e^(-t²) dt = (1/2) ∫(-∞)^∞ e^(-t²) dt = √π / 2.
THEOREM: Triple Integration over a Rectangular Box
Let G be the rectangular box defined by the inequalities a ≤ x ≤ b, c ≤ y ≤ d, k ≤ z ≤ l. If f is continuous on the region G, then: ∫∫∫_G f(x, y, z) dV = ∫ (x=a to b) ∫ (y=c to d) ∫ (z=k to l) f(x, y, z) dz dy dx.
🔑 Definition — Fubini’s Theorem for Triple Integrals: The triple integral over a rectangular box can be evaluated as an iterated integral in any order of integration.
The theorem states that the iterated integral on the right can be replaced with any of the five other iterated integrals that result by altering the order of integration (e.g., dy dz dx, dx dz dy, etc.).
Example 5: Evaluating ∫∫∫_G 12xy²z³ dV over a rectangular box
G is defined by the inequalities -1 ≤ x ≤ 2, 0 ≤ y ≤ 3, 0 ≤ z ≤ 2. We integrate in the order dz dy dx (z first, then y, then x).
∫∫∫_G 12xy²z³ dV = ∫ (x=-1 to 2) ∫ (y=0 to 3) ∫ (z=0 to 2) 12xy²z³ dz dy dx. Step 1 (dz): Inner integral: ∫ (0 to 2) 12xy²z³ dz = 12xy² [z⁴/4](from 0 to 2) = 12xy² (16/4) = 48xy². Step 2 (dy): Next integral: ∫ (0 to 3) 48xy² dy = 48x [y³/3](from 0 to 3) = 48x (27/3) = 432x. Step 3 (dx): Outer integral: ∫ (-1 to 2) 432x dx = 432 [x²/2](from -1 to 2) = 432*(4/2 — 1/2) = 432*(3/2) = 648.
Example 6: Evaluating ∫∫∫ (x — 2y + z) dx dy dz over a non-rectangular region
The region R is defined by the inequalities: 0 ≤ x ≤ 1, 0 ≤ y ≤ x², 0 ≤ z ≤ x + y. We integrate in the order dz dy dx.
∫∫∫_R (x — 2y + z) dz dy dx = ∫ (x=0 to 1) ∫ (y=0 to x²) ∫ (z=0 to x+y) (x — 2y + z) dz dy dx. Step 1 (dz): Inner integral: ∫ (0 to x+y) (x — 2y + z) dz = [(x — 2y)z + z²/2] (from 0 to x+y) = (x — 2y)(x+y) + (x+y)²/2. Expanding: (x² — 2xy + xy — 2y²) + (x² + 2xy + y²)/2 = (x² — xy — 2y²) + (x²/2 + xy + y²/2) = (3/2)x² — (3/2)y² = (3/2)(x² — y²). Step 2 (dy): ∫ (0 to x²) (3/2)(x² — y²) dy = (3/2)[x²y — y³/3](from 0 to x²) = (3/2)(x⁴ — x⁶/3) = (3/2)((3x⁴ — x⁶)/3) = (x⁴/2) — (x⁶/2). Step 3 (dx): ∫ (0 to 1) (x⁴/2 — x⁶/2) dx = (1/2)[x⁵/5 — x⁷/7](from 0 to 1) = (1/2)(1/5 — 1/7) = (1/2)( (7-5)/35 ) = (1/2)(2/35) = 1/35.
Example 7: Evaluating ∫∫∫ xyz dx dy dz over an octant of a sphere
S = {(x,y,z): x² + y² + z² ≤ 1, x ≥ 0, y ≥ 0, z ≥ 0}. This is the positive octant of the unit sphere. The projection of the sphere onto the xy-plane is the circle x² + y² = 1 (in the first quadrant). For a given (x, y), z varies from 0 to z = √(1 — x² — y²).
The triple integral becomes: ∫ (x=0 to 1) ∫ (y=0 to √(1 — x²)) ∫ (z=0 to √(1 — x² — y²)) xyz dz dy dx. Step 1 (dz): Inner integral: ∫ (0 to √(1 — x² — y²)) xyz dz = xy [z²/2](from 0 to (1 — x² — y²)) = (xy/2)(1 — x² — y²). Step 2 (dy): ∫ (0 to √(1 — x²)) (xy/2)(1 — x² — y²) dy = (x/2) ∫ (0 to √(1 — x²)) (y — x²y — y³) dy = (x/2)[y²/2 — x²y²/2 — y⁴/4](from 0 to √(1 — x²)). Evaluating at y = √(1 — x²): = (x/2)[(1 — x²)/2 — x²(1 — x²)/2 — (1 — x²)²/4]. Simplify by multiplying by 4/4: = (x/8)[2(1 — x²) — 2x²(1 — x²) — (1 — x²)²] = (x/8)[2 — 2x² — 2x² + 2x⁴ — (1 — 2x² + x⁴)] = (x/8)[2 — 4x² + 2x⁴ — 1 + 2x² — x⁴] = (x/8)[1 — 2x² + x⁴] = (x/8)(1 — x²)². Step 3 (dx): ∫ (0 to 1) (x/8)(1 — x²)² dx = (1/8) ∫ (0 to 1) x(1 — 2x² + x⁴) dx = (1/8) ∫ (0 to 1) (x — 2x³ + x⁵) dx = (1/8)[x²/2 — 2x⁴/4 + x⁶/6](from 0 to 1) = (1/8)[1/2 — 1/2 + 1/6] = (1/8)(1/6) = 1/48.
⭐ Key Takeaways
The most critical takeaway from this lecture is the power of changing coordinate systems, particularly to polar coordinates, for evaluating double integrals over circular or semicircular regions, transforming nonelementary Cartesian integrands into solvable forms. The proof of the Gaussian integral (∫_0^∞ e^(-t²) dt = √π/2) is a landmark result derived by converting a double integral over the plane into polar coordinates and leveraging the product of two single integrals. For triple integrals, the key is mastering the evaluation of iterated integrals with the correct order of integration, as demonstrated with both rectangular and more general regions, where careful attention to variable limits is essential.
🧠 Quick Revision Questions
- In Example 1, what is the polar equation for the curve x = √(4y — y²)?
- Why could the integral ∫∫ e^(x²+y²) dy dx over a semicircle not be evaluated directly in Cartesian coordinates?
- What is the value of the improper integral ∫∫_(-∞)^∞ e^(-(x²+y²)) dx dy?
- State Fubini’s Theorem for a triple integral over a rectangular box.
- In Example 7, what region of the sphere is being integrated over, and what is the final value of the integral ∫∫∫ xyz dV?
📘 Lecture 27 — Vector Valued Functions
📖 Overview: This lecture introduces vector-valued functions, which assign vectors to real numbers, enabling the compact representation of curves in 2-space and 3-space. It covers the definition, natural domain, parametric representation in vector form, and graphical interpretation of these functions, including classic curves like circles, helices, and twisted cubics.
🗂️ Topics Covered
The lecture defines vector-valued functions and their component functions, explains the natural domain as the intersection of component domains, demonstrates how to express parametric equations as single vector equations, illustrates graphing via radius vectors, and explores graphs of specific functions including circles, circular helices, lines, twisted cubics, and constant vector functions.
📝 Lecture Summary
Vector Valued Functions
A vector-valued function assigns to each real number (t) in its domain a vector in 2-space or 3-space. In 2-space: (\mathbf{r}(t) = \langle x(t), y(t) \rangle = x(t)\mathbf{i} + y(t)\mathbf{j}). In 3-space: (\mathbf{r}(t) = \langle x(t), y(t), z(t) \rangle = x(t)\mathbf{i} + y(t)\mathbf{j} + z(t)\mathbf{k}). The component functions are the real-valued functions (x(t), y(t), z(t)). Vector-valued functions are denoted in bold, while real-valued functions are in lightface italic.
🔑 Definition — Vector-Valued Function: A function whose domain is a set of real numbers and whose range is a set of vectors in 2-space or 3-space.
📌 Example: (\mathbf{r}(t) = (\ln t)\mathbf{i} + \sqrt{t^2 + 2},\mathbf{j} + (\cos \pi t)\mathbf{k}). Component functions: (x(t) = \ln t), (y(t) = \sqrt{t^2 + 2}), (z(t) = \cos \pi t). Then (\mathbf{r}(1) = (\ln 1)\mathbf{i} + \sqrt{3},\mathbf{j} + (\cos \pi)\mathbf{k} = \sqrt{3},\mathbf{j} - \mathbf{k}). The function is undefined for (t < 0) because (\ln t) is undefined.
Natural Domain
The natural domain of a vector-valued function consists of all real numbers for which every component is defined and yields a real value. It is the intersection of the natural domains of the component functions.
💡 Why this matters: Knowing the natural domain ensures you only evaluate the function at valid parameter values, avoiding undefined operations.
Parametric Equations in Vector Form
Vector-valued functions provide a compact way to express parametric equations. For 2-space: (x = x(t), y = y(t)) is equivalent to (\mathbf{r} = x(t)\mathbf{i} + y(t)\mathbf{j}). For 3-space: (x = x(t), y = y(t), z = z(t)) is equivalent to (\mathbf{r} = x(t)\mathbf{i} + y(t)\mathbf{j} + z(t)\mathbf{k}). Writing (\mathbf{r} = x\mathbf{i} + y\mathbf{j}) (2-space) or (\mathbf{r} = x\mathbf{i} + y\mathbf{j} + z\mathbf{k}) (3-space), the vector form is (\mathbf{r} = \mathbf{r}(t)). Conversely, any vector equation can be rewritten as parametric equations by equating components.
📌 Example: Express (x = t^2, y = 3t) as a single vector equation: (\mathbf{r} = t^2\mathbf{i} + 3t\mathbf{j}).
📌 Example: Express (x = \cos t, y = \sin t, z = t) as a single vector equation: (\mathbf{r} = (\cos t)\mathbf{i} + (\sin t)\mathbf{j} + t\mathbf{k}).
📌 Example: Find parametric equations for (\mathbf{r} = (t^3 + 1)\mathbf{i} + 3\mathbf{j} + e^t\mathbf{k}). Equating components: (x = t^3 + 1, y = 3, z = e^t).
Graphs of Vector-Valued Functions
To graph (\mathbf{r}(t)) geometrically, position the vector (\mathbf{r} = \mathbf{r}(t)) with its initial point at the origin. As (t) varies, the tip of the vector traces a curve (C). This vector is called the radius vector or position vector of (C), and (C) is the graph of the function (\mathbf{r}(t)) or of the equation (\mathbf{r} = \mathbf{r}(t)). The graph is also the graph of the corresponding parametric equations.
📌 Example: Sketch (\mathbf{r}(t) = (\cos t)\mathbf{i} + (\sin t)\mathbf{j}, 0 \le t \le 2\pi). Parametric equations: (x = \cos t, y = \sin t). This is a circle of radius 1 centered at the origin, traced counterclockwise.
📌 Example: Sketch (\mathbf{r}(t) = (\cos t)\mathbf{i} + (\sin t)\mathbf{j} + 2\mathbf{k}, 0 \le t \le 2\pi). Parametric equations: (x = \cos t, y = \sin t, z = 2). The tip traces a circle of radius 1 in the plane (z = 2), centered on the z-axis, counterclockwise when viewed from above.
📌 Example: Sketch (\mathbf{r}(t) = (a\cos t)\mathbf{i} + (a\sin t)\mathbf{j} + (ct)\mathbf{k}) where (a, c > 0). Parametric equations: (x = a\cos t, y = a\sin t, z = ct). As (t) increases, (z) increases, so the point moves upward while circling the z-axis. This produces a circular helix, a corkscrew curve wrapping around a right-circular cylinder of radius (a).
📌 Example: Describe the graph of (\mathbf{r} = (-2 + t)\mathbf{i} + 3t\mathbf{j} + (5 - 4t)\mathbf{k}). Parametric equations: (x = -2 + t, y = 3t, z = 5 - 4t). This is a line through ((-2, 0, 5)) parallel to the vector (\mathbf{i} + 3\mathbf{j} - 4\mathbf{k}).
📌 Example: The graph of (\mathbf{r}(t) = t\mathbf{i} + t^2\mathbf{j} + t^3\mathbf{k}) is a twisted cubic. Parametric equations: (x = t, y = t^2, z = t^3). Eliminating (t) from (x) and (y) gives (y = x^2), so the curve lies on the parabolic cylinder (y = x^2). It starts at the origin for (t=0) and moves upward and away.
Graphs of Constant Vector-Valued Functions
If (\mathbf{c}) is a constant vector (independent of the parameter), the graph of (\mathbf{r} = \mathbf{c}) is a single point at the tip of (\mathbf{c}). In 2-space: the point ((x_0, y_0)); in 3-space: the point ((x_0, y_0, z_0)).
📌 Example: The graph of (\mathbf{r} = 2\mathbf{i} + 3\mathbf{j} - \mathbf{k}) is the point ((2, 3, -1)).
Real-Valued Functions from Vector Functions
For a vector-valued function (\mathbf{r}(t)), the norm (|\mathbf{r}(t)|) is a real-valued function of (t).
📌 Example: If (\mathbf{r}(t) = t\mathbf{i} + (t-1)\mathbf{j}), then (|\mathbf{r}(t)| = \sqrt{t^2 + (t-1)^2}), a real-valued function.
📌 Example: For (\mathbf{r}(t) = (\cos t)\mathbf{i} + (\sin t)\mathbf{j} + 2\mathbf{k}), (|\mathbf{r}(t)| = \sqrt{\cos^2 t + \sin^2 t + 4} = \sqrt{1+4} = \sqrt{5}). Thus every point on the circle is at a constant distance (\sqrt{5}) from the origin, meaning the circle lies on a sphere of radius (\sqrt{5}).
⭐ Key Takeaways
Vector-valued functions map real numbers to vectors, using component functions to define curves in 2-space or 3-space. Their natural domain is the intersection of the domains of all components, and they compactly represent parametric equations via the single vector equation (\mathbf{r} = \mathbf{r}(t)). The graph is traced by the tip of the radius vector as the parameter varies, producing curves such as circles, lines, helices, and twisted cubics, while constant vector functions graph as single points. The norm of a vector-valued function is a real-valued function that can reveal geometric properties, like constancy indicating points lie on a sphere.
🧠 Quick Revision Questions
- What are the component functions of a vector-valued function in 3-space?
- How do you find the natural domain of a vector-valued function?
- Write the vector equation equivalent to the parametric equations (x = \sin t, y = \cos t, z = t).
- Describe the graph of (\mathbf{r}(t) = (3\cos t)\mathbf{i} + (3\sin t)\mathbf{j} + t\mathbf{k}).
- If (\mathbf{r}(t) = \langle t^2, t, 1 \rangle), what is (|\mathbf{r}(t)|)?
📘 Lecture 28 — Limits of Vector Valued Functions
📖 Overview: This lecture introduces the calculus of vector-valued functions, extending concepts of limits, continuity, derivatives, and integrals from real-valued to vector-valued functions. These tools are essential for analyzing curves in 2-space and 3-space, with applications in physics, engineering, and geometry.
🗂️ Topics Covered
The lecture covers limits and continuity of vector-valued functions, derivatives and their computation through component-wise differentiation, tangent vectors and tangent lines to parametric curves, smooth parameterization, properties of derivatives including dot and cross product rules, and integrals of vector-valued functions with their properties.
📝 Lecture Summary
Limits of Vector-Valued Functions
The limit of a vector-valued function is defined component-wise. For a function r(t) = x(t)i + y(t)j in 2-space, we define:
lim r(t) = (lim x(t))i + (lim y(t))j as t→a
For r(t) = x(t)i + y(t)j + z(t)k in 3-space:
lim r(t) = (lim x(t))i + (lim y(t))j + (lim z(t))k as t→a
If any component limit does not exist, the limit of r(t) does not exist. These definitions apply to one-sided limits (t→a⁺, t→a⁻) and infinite limits (t→+∞, t→-∞) as well.
🔑 Definition — Limit of Vector Function: lim r(t) = L if and only if each component of r(t) approaches the corresponding component of L as t→a. Geometrically, this means the length and direction of r(t) approach those of L.
Continuity of Vector-Valued Functions
A vector-valued function r is continuous at t₀ if:
- r(t₀) is defined
- lim r(t) exists as t→t₀
- lim r(t) = r(t₀) as t→t₀
r is continuous at t₀ if and only if each component of r is continuous. A function called continuous everywhere or simply continuous if it is continuous at all real values of t. Geometrically, the graph of a continuous vector-valued function is an unbroken curve.
Derivatives of Vector-Valued Functions
The derivative r'(t) of a vector-valued function r(t) is defined by:
r'(t) = lim [r(t+h) - r(t)] / h as h→0
💡 Why this matters: This definition mirrors the real-valued derivative but yields a vector result.
Theorem for Computing Derivatives
(a) If r(t) = x(t)i + y(t)j in 2-space, with x(t) and y(t) differentiable, then: r'(t) = x'(t)i + y'(t)j
(b) If r(t) = x(t)i + y(t)j + z(t)k in 3-space, with differentiable components, then: r'(t) = x'(t)i + y'(t)j + z'(t)k
Proof (a): r'(t) = lim [x(t+h)-x(t)]/h i + lim [y(t+h)-y(t)]/h j = x'(t)i + y'(t)j as h→0
Notation: d/dt[r(t)], dr/dt, r'(t), and ṙ
📐 Formula: r'(t) = d/dt[x(t)] i + d/dt[y(t)] j (2-space)
📌 Example: Let r(t) = t²i + t³j. Find r'(t) and r'(1).
r'(t) = d/dt[t²] i + d/dt[t³] j = 2ti + 3t²j
Substituting t=1: r'(1) = 2i + 3j
Tangent Vectors and Tangent Lines
Geometric Interpretation
Suppose C is the graph of r(t) and r'(t) exists and is nonzero. If r'(t) is positioned with its initial point at the terminal point of the radius vector...
🔑 Definition — Tangent Vector: Let P be a point on the graph of r(t), with r(t₀) the radius vector from origin to P. If r'(t₀) exists and r'(t₀) ≠ 0, then r'(t₀) is called the tangent vector to the graph of r at r(t₀).
A graph can fail to have a tangent vector if the derivative does not exist or equals zero at that point.
The tangent line at r(t₀) is the line parallel to r'(t₀) passing through the tip of r(t₀).
📐 Formula — Vector Equation of Tangent Line: r = r(t₀) + t r'(t₀)
📌 Example: Find parametric equations of the tangent line to the circular helix x = cos t, y = sin t, z = t at t = π/6.
Vector equation: r(t) = (cos t)i + (sin t)j + tk r'(t) = (-sin t)i + (cos t)j + k
At t = π/6: r(π/6) = (√3/2)i + (1/2)j + (π/6)k r'(π/6) = (-1/2)i + (√3/2)j + k
Vector equation of tangent line: r = r(π/6) + t r'(π/6) r = (√3/2 - t/2)i + (1/2 + √3·t/2)j + (π/6 + t)k
Parametric equations: x = √3/2 - t/2 y = 1/2 + √3·t/2 z = π/6 + t
📌 Example: The graph of r(t) = t²i + t³j is a semicubical parabola. Find tangent line at: (a) (0,0): Corresponds to t=0. r'(0)=0, so no tangent vector exists—no tangent line at this point. (b) (1,1): Corresponds to t=1. r = r(1) + t r'(1) = (i+j) + t(2i+3j)
Smooth Parameterization
A vector-valued function r(t) in 2-space or 3-space is smoothly parameterized or a smooth function of t if the components have continuous derivatives and r'(t) ≠ 0 for any t.
In 3-space: r(t) = x(t)i + y(t)j + z(t)k is smooth if x'(t), y'(t), z'(t) are continuous and no value of t makes all three derivatives zero.
A parametric curve C is called smooth if it is the graph of some smooth vector-valued function. A smooth vector-valued function has a tangent line at every point on its graph.
Properties of Derivatives (Rules of Differentiation)
For vector-valued functions r(t), r₁(t), r₂(t), real-valued function f(t), scalar k, and constant vector c:
- d/dt[c] = 0
- d/dt[kr(t)] = k d/dt[r(t)]
- d/dt[r₁(t) + r₂(t)] = d/dt[r₁(t)] + d/dt[r₂(t)]
- d/dt[r₁(t) - r₂(t)] = d/dt[r₁(t)] - d/dt[r₂(t)]
- d/dt[f(t)r(t)] = f(t) d/dt[r(t)] + r(t) d/dt[f(t)]
Dot and Cross Product Rules
📐 Formula — Dot Product Rule: d/dt[r₁(t)·r₂(t)] = r₁·dr₂/dt + dr₁/dt·r₂ (order doesn't matter)
📐 Formula — Cross Product Rule (3-space): d/dt[r₁(t) × r₂(t)] = r₁ × dr₂/dt + dr₁/dt × r₂ (order matters!)
Theorem: Constant Length Implies Orthogonality
If ||r(t)|| is constant for all t, then r(t)·r'(t) = 0, meaning r(t) and r'(t) are orthogonal for all t.
Proof: d/dt[||r(t)||²] = 2r(t)·dr/dt = 0, so r(t)·dr/dt = 0
📌 Example: For a curve on a sphere of radius k centered at origin, ||r(t)|| = k constant, so r(t)·r'(t) = 0. The radius vector is perpendicular to the tangent vector, meaning the tangent line is perpendicular to the radius at the point of tangency.
Integrals of Vector-Valued Functions
Definition
(a) In 2-space, r(t) = x(t)i + y(t)j: ∫ r(t)dt = (∫ x(t)dt)i + (∫ y(t)dt)j ∫ₐᵇ r(t)dt = (∫ₐᵇ x(t)dt)i + (∫ₐᵇ y(t)dt)j
(b) In 3-space, r(t) = x(t)i + y(t)j + z(t)k: ∫ r(t)dt = (∫ x(t)dt)i + (∫ y(t)dt)j + (∫ z(t)dt)k ∫ₐᵇ r(t)dt = (∫ₐᵇ x(t)dt)i + (∫ₐᵇ y(t)dt)j + (∫ₐᵇ z(t)dt)k
📌 Example: Let r(t) = 2ti + 3t²j
(a) ∫ r(t)dt = ∫ (2ti + 3t²j)dt = (∫2t dt)i + (∫3t² dt)j = (t² + C₁)i + (t³ + C₂)j = t²i + t³j + C, where C = C₁i + C₂j is an arbitrary vector constant of integration
(b) ∫₀² r(t)dt = ∫₀² (2ti + 3t²j)dt = (∫₀² 2t dt)i + (∫₀² 3t² dt)j = [t²]₀² i + [t³]₀² j = (4-0)i + (8-0)j = 4i + 8j
Properties of Integrals
- ∫ cr(t)dt = c ∫ r(t)dt
- ∫ [r₁(t) + r₂(t)]dt = ∫ r₁(t)dt + ∫ r₂(t)dt
- ∫ [r₁(t) - r₂(t)]dt = ∫ r₁(t)dt - ∫ r₂(t)dt
- d/dt[∫ r(t)dt] = r(t) (indefinite integral gives antiderivatives)
- If R'(t) = r(t), then ∫ r(t)dt = R(t) + C and ∫ₐᵇ r(t)dt = R(b) - R(a)
⭐ Key Takeaways
The limit, continuity, derivative, and integral of vector-valued functions are computed component-wise, extending real-valued calculus to curves in space. The derivative r'(t) gives a tangent vector when nonzero, and the tangent line equation is r = r(t₀) + t r'(t₀). A function is smooth if its components have continuous derivatives and r'(t) ≠ 0 everywhere. For constant-length vectors, r(t) and r'(t) are always perpendicular. Integration of vector functions follows component-wise integration with vector constants of integration, and definite integrals follow the fundamental theorem with antiderivatives.
🧠 Quick Revision Questions
- How do you compute the limit of a vector-valued function r(t) = x(t)i + y(t)j + z(t)k as t→a?
- What three conditions must be satisfied for r(t) to be continuous at t₀?
- If r(t) = cos(t)i + sin(t)j + tk, what is r'(t) and what is the tangent line at t = π/4?
- Prove that if ||r(t)|| is constant, then r(t) is perpendicular to r'(t).
- Compute ∫₀¹ (3t²i + 2tj + k)dt and express the result as a vector.
📘 Lecture 29 — Change of Parameter
📖 Overview: This lecture explores how to change the parameter in vector-valued functions while preserving the geometric curve. It introduces arc length as a fundamental parameter and provides the mathematical framework for reparametrizing curves in both 2-space and 3-space, which is essential for analyzing motion along curves independent of speed.
🗂️ Topics Covered
The lecture covers the concept of changing parameters in vector-valued functions and the conditions for a smooth change of parameter. It then introduces arc length for curves in 2-space and 3-space, presenting the integral formulas. Subsequently, it explains the process of using arc length itself as a parameter, including the theorem relating arc length s to a given parameter t. Worked examples demonstrate the reparametrization of lines, circles, and other curves using arc length, as well as calculating arc length and using the chain rule for differentiation.
📝 Lecture Summary
Change of parameter
It is possible for different vector-valued functions to have the same graph. For example, the graph of r = (3 cos t)i + (3 sin t)j, 0 < t < 2π, is a circle of radius 3. By substituting t = s/3, we obtain r = 3 cos (s/3)i + 3 sin (s/3)j, 0 < s < 6π, which has the same graph. In general, substituting t = g(u) in r(t) changes the parameter.
For a smooth change of parameter, the function g must satisfy: (1) g is differentiable, (2) g' is continuous, (3) g'(u) ≠ 0 for any u in its domain, and (4) the range of g is the domain of r.
ARC LENGTH
If x'(t) and y'(t) are continuous for a < t < b, then the curve given by x = x(t), y = y(t) has arc length: 📐 Formula: L = ∫ₐᵇ √[(dx/dt)² + (dy/dt)²] dt This generalizes to 3-space: if x'(t), y'(t), and z'(t) are continuous, then: 📐 Formula: L = ∫ₐᵇ √[(dx/dt)² + (dy/dt)² + (dz/dt)²] dt
🔑 Definition — Arc Length: The total length of a curve traced by a vector-valued function from t = a to t = b.
📌 Example: Find the arc length of the circular helix x = cos t, y = sin t, z = t from t = 0 to t = π. L = ∫₀ᵖⁱ √[(-sin t)² + (cos t)² + 1] dt = ∫₀ᵖⁱ √[sin²t + cos²t + 1] dt = ∫₀ᵖⁱ √2 dt = √2 π
ARC LENTH AS A PARAMETER
Using arc length s as a parameter is often the best choice. The process involves: Step 1: Select an arbitrary reference point on the curve. Step 2: Choose a positive direction along the curve. Step 3: Let s be the "signed" arc length from the reference point to any point P, positive in the positive direction and negative in the negative direction.
The curve is then given by x = x(s), y = y(s) in 2-space or x = x(s), y = y(s), z = z(s) in 3-space. When a curve is already parameterized by t, the positive direction for s is the direction of increasing t.
THEOREM
(a) For a curve in 2-space x = x(t), y = y(t) with continuous derivatives and reference point at (x(t₀), y(t₀)): 📐 Formula: s = ∫ₜ₀ᵗ √[(dx/du)² + (dy/du)²] du
(b) For a curve in 3-space x = x(t), y = y(t), z = z(t) with continuous derivatives and reference point at (x(t₀), y(t₀), z(t₀)): 📐 Formula: s = ∫ₜ₀ᵗ √[(dx/du)² + (dy/du)² + (dz/du)²] du
From the Second Fundamental Theorem of Calculus, we obtain: 📐 Formula (2-space): ds/dt = √[(dx/dt)² + (dy/dt)²] 📐 Formula (3-space): ds/dt = √[(dx/dt)² + (dy/dt)² + (dz/dt)²]
💡 Why this matters: ds/dt represents the rate of change of arc length with respect to t, which is the speed of the particle. For a smooth curve, ds/dt > 0, ensuring a one-to-one correspondence between s and t.
📌 Example: Reparametrize the line x = 2t + 1, y = 3t - 2 using arc length s as a parameter, with reference point (1, -2). Here, dx/du = 2, dy/du = 3. The reference point (1, -2) corresponds to t₀ = 0. s = ∫₀ᵗ √(4 + 9) du = ∫₀ᵗ √13 du = √13 t Thus, t = s/√13. Substituting: x = 2(s/√13) + 1 = (2/√13)s + 1, y = 3(s/√13) - 2 = (3/√13)s - 2.
📌 Example: Find parametric equations for the circle x = a cos t, y = a sin t (0 < t < 2π) using arc length s as a parameter, with reference point (a, 0). Here, dx/du = -a sin u, dy/du = a cos u. The reference point (a, 0) corresponds to t₀ = 0. s = ∫₀ᵗ √[(-a sin u)² + (a cos u)²] du = ∫₀ᵗ √(a²) du = ∫₀ᵗ a du = at Thus, t = s/a. Substituting: x = a cos(s/a), y = a sin(s/a) for 0 < s < 2πa.
📌 Example: Find arc length of r(t) = t³i + tj + ½√6 t²k, 1 < t < 3. Here, x = t³, y = t, z = ½√6 t². dx/dt = 3t², dy/dt = 1, dz/dt = √6 t. Arc length = ∫₁³ √[9t⁴ + 1 + 6t²] dt = ∫₁³ √[(3t² + 1)²] dt = ∫₁³ (3t² + 1) dt = [t³ + t]₁³ = (27 + 3) - (1 + 1) = 28.
📌 Example: Calculate dr/du by chain rule for r = eᵗi + 4e⁻ᵗj, where t = u². dr/dt = eᵗi - 4e⁻ᵗj dt/du = 2u dr/du = (dr/dt)(dt/du) = (eᵗi - 4e⁻ᵗj)(2u) = 2ue^(u²)i - 8ue^(-u²)j Verification: Expressing r in terms of u: r = e^(u²)i + 4e^(-u²)j, so dr/du = 2ue^(u²)i - 8ue^(-u²)j ✓
⭐ Key Takeaways
The arc length parameter s provides a natural, geometric parameterization independent of the original parameter's speed. The core relationship ds/dt = ||r'(t)|| gives the speed, and for smooth curves ds/dt is always positive. The theorem s = ∫√((dx/dt)² + (dy/dt)² + (dz/dt)²) dt allows converting any parameterization to arc length. When reparametrizing, the conditions for smooth change ensure the new function remains smooth. Mastering these concepts is essential for understanding curvature, torsion, and the Frenet-Serret frame in subsequent topics.
🧠 Quick Revision Questions
- What four conditions must g satisfy for t = g(u) to be a smooth change of parameter?
- Write the formula for arc length of a 3D curve from t = a to t = b.
- What is ds/dt, and why is it always positive for a smooth curve?
- How do you reparametrize a curve using arc length s as a parameter?
- In the example of the circle x = a cos t, y = a sin t, what is the relationship between s and t when the reference point is (a, 0)?