π Lecture 30 β First Fundamental Theorem of Calculus
π Overview: This lecture introduces the First Fundamental Theorem of Calculus, which provides a powerful method for evaluating definite integrals using antiderivatives. It establishes the critical relationship between definite and indefinite integrals and introduces the Mean Value Theorem for Integrals and the concept of average values of functions.
ποΈ Topics Covered
This lecture covers the statement and proof of the First Fundamental Theorem of Calculus using the Mean Value Theorem, its application to evaluate definite integrals, properties of the bracket notation, the relationship between definite and indefinite integrals, the Mean Value Theorem for Integrals with its proof, and the definition of the average value of a function.
π Lecture Summary
The First Fundamental Theorem of Calculus
This theorem provides the essential link between differentiation and integration, allowing us to compute definite integrals easily using antiderivatives. The theorem states that if a function is continuous on a closed interval and we have its antiderivative, then the definite integral equals the difference of the antiderivative evaluated at the endpoints.
Theorem 5.7.1 (The First Fundamental Theorem of Calculus) If f is continuous on [a, b] and if F is an antiderivative of f on [a, b], then [ \int_a^b f(x)dx = F(b) - F(a) ]
π Definition β Antiderivative: A function F is an antiderivative of f if (F'(x) = f(x)) for all x in the interval.
Proof: The proof uses the Mean Value Theorem involving derivatives. The interval [a, b] is subdivided into n subintervals using points (x_1, x_2, ..., x_{n-1}) such that (a < x_1 < x_2 < ... < x_{n-1} < b). The widths of these intervals are denoted (\Delta x_1, \Delta x_2, ..., \Delta x_n).
Since (F'(x) = f(x)) for all x in [a, b], F satisfies the MVT on each subinterval. Thus, there exist points (x_1^, x_2^, ..., x_n^*) in each respective subinterval such that:
- (F(x_1) - F(a) = F'(x_1^)(x_1 - a) = f(x_1^)\Delta x_1)
- (F(x_2) - F(x_1) = F'(x_2^)(x_2 - x_1) = f(x_2^)\Delta x_2)
- ...
- (F(b) - F(x_{n-1}) = F'(x_n^)(b - x_{n-1}) = f(x_n^)\Delta x_n)
Adding these equations yields: [ F(b) - F(a) = \sum_{k=1}^n f(x_k^*)\Delta x_k ]
As n increases such that (\max \Delta x_k \rightarrow 0), and since f is continuous: [ F(b) - F(a) = \lim_{\max \Delta x_k \rightarrow 0} \sum_{k=1}^n f(x_k^*)\Delta x_k = \int_a^b f(x)dx ]
The notation (F(b) - F(a)) can also be written as ([F(x)]_a^b).
π Example: Evaluate (\int_1^2 xdx) An antiderivative of (f(x) = x) is (F(x) = \frac{1}{2}x^2) [ \int_1^2 xdx = \left[\frac{1}{2}x^2\right]_1^2 = \frac{1}{2}(2)^2 - \frac{1}{2}(1)^2 = 2 - \frac{1}{2} = \frac{3}{2} ]
Properties of Bracket Notation:
- ([cF(x)]_a^b = c[F(x)]_a^b)
- ([F(x) + G(x)]_a^b = [F(x)]_a^b + [G(x)]_a^b)
- ([F(x) - G(x)]_a^b = [F(x)]_a^b - [G(x)]_a^b)
π‘ Why this matters: These properties make evaluating definite integrals with multiple terms straightforward, as each term can be handled separately.
Relationship Between Definite and Indefinite Integrals
In applying the First Theorem of Calculus, it does not matter which antiderivative of f is used. If F is any antiderivative of f, then all others have the form F(x) + C (by Theorem 5.2.2).
[ [F(x) + C]_a^b = [F(b) + C] - [F(a) + C] = F(b) - F(a) = [F(x)]_a^b = \int_a^b f(x)dx ]
Since (\int f(x)dx = F(x) + C), it follows that: [ \int_a^b f(x)dx = \left[\int f(x)dx\right]_a^b ]
This shows that we can first evaluate the indefinite integral and then apply the limits to evaluate the definite integral. This directly relates the definite and indefinite integrals.
π Example: Find the area under (y = \cos(x)) over ([0, \pi/2]). Since (\cos(x) \geq 0) for (0 \leq x \leq \pi/2): [ A = \int_0^{\pi/2} \cos(x)dx = \left[\sin(x)\right]_0^{\pi/2} = \sin(\pi/2) - \sin(0) = 1 - 0 = 1 ]
π Example: Evaluate (\int_0^3 (x^3 - 4x + 1)dx) [ \int_0^3 (x^3 - 4x + 1)dx = \left[\frac{x^4}{4} - 4\cdot\frac{x^2}{2} + x\right]_0^3 = \left[\frac{x^4}{4} - 2x^2 + x\right]_0^3 ] [ = \left(\frac{81}{4} - 18 + 3\right) - (0) = \frac{81}{4} - 15 = \frac{81 - 60}{4} = \frac{21}{4} ]
π Example: Evaluate (\int_0^6 f(x)dx) if (f(x) = \begin{cases} x^2 & x < 2 \ 3x - 2 & x \geq 2 \end{cases})
Using Theorem 5.6.6 to split the integral at the point where the function definition changes: [ \int_0^6 f(x)dx = \int_0^2 x^2 dx + \int_2^6 (3x - 2)dx ] [ = \left[\frac{x^3}{3}\right]_0^2 + \left[\frac{3x^2}{2} - 2x\right]_2^6 = \left(\frac{8}{3} - 0\right) + \left[\left(\frac{3(36)}{2} - 12\right) - \left(\frac{3(4)}{2} - 4\right)\right] ] [ = \frac{8}{3} + [(54 - 12) - (6 - 4)] = \frac{8}{3} + [42 - 2] = \frac{8}{3} + 40 = \frac{8 + 120}{3} = \frac{128}{3} ]
Mean Value Theorem for Integrals
Consider a continuous function f on [a,b] with maximum value M and minimum value m. The area under the curve f is at least as large as the area of a rectangle of height m and no larger than the area of a rectangle of height M. Therefore, there exists some rectangle of a certain height for which the area under f equals the area of the rectangle.
Theorem 5.7.2 (The Mean-Value Theorem for Integrals) If f is continuous on a closed interval [a, b], then there is at least one number x* in [a, b] such that [ \int_a^b f(x)dx = f(x^*)(b - a) ]
Proof: By the Extreme Value Theorem (Theorem 4.6.4), f assumes a maximum M and a minimum m on [a,b]. So for all x in [a,b]: [ m \leq f(x) \leq M ]
Using Theorem 5.6.7(b) on integrals of inequalities: [ \int_a^b m dx \leq \int_a^b f(x)dx \leq \int_a^b M dx ] [ m(b - a) \leq \int_a^b f(x)dx \leq M(b - a) ]
Dividing by ((b - a)): [ m \leq \frac{1}{b - a} \int_a^b f(x)dx \leq M ]
The quantity (\frac{1}{b - a} \int_a^b f(x)dx) is a number between m and M on [a,b]. Since f is continuous and takes on all values between m and M (by the Intermediate Value Theorem, Theorem 2.7.9), f must assume this value for some point x* in [a,b]. Therefore: [ \frac{1}{b - a} \int_a^b f(x)dx = f(x^) ] [ \int_a^b f(x)dx = f(x^)(b - a) ]
π Example: (f(x) = x^2) is continuous on [1, 4]. The MVT for Integrals guarantees there exists a number (x^) in [1, 4] such that: [ \int_1^4 x^2 dx = f(x^)(4 - 1) = 3(x^*)^2 ]
Computing the integral: [ \int_1^4 x^2 dx = \left[\frac{x^3}{3}\right]_1^4 = \frac{64}{3} - \frac{1}{3} = \frac{63}{3} = 21 ]
So (3(x^)^2 = 21) which implies ((x^)^2 = 7) and thus (x^* = \sqrt{7}).
Average Value of a Function
Definition 5.7.3 If f is integrable on [a, b], then the average value (or mean value) of f on [a, b] is defined to be [ f_{avg} = \frac{1}{b - a} \int_a^b f(x)dx ]
If (y = f(x)), then (f_{avg}) is also called the average value of y with respect to x over [a, b].
β Key Takeaways
The First Fundamental Theorem of Calculus states that for a continuous function f with antiderivative F, the definite integral from a to b equals F(b) - F(a), providing an efficient method for evaluating definite integrals. The choice of constant C in the antiderivative does not affect the result, establishing a direct relationship between definite and indefinite integrals. The Mean Value Theorem for Integrals guarantees that for a continuous function, there exists a point where the function's value equals the average value, giving (\int_a^b f(x)dx = f(x^*)(b - a)). The average value of a function is defined as (f_{avg} = \frac{1}{b-a}\int_a^b f(x)dx), representing the constant value that would give the same total area over the interval.
π§ Quick Revision Questions
- State the First Fundamental Theorem of Calculus and explain what it allows us to do.
- Why does the constant C in an antiderivative not affect the value of a definite integral?
- Write the formula for the Mean Value Theorem for Integrals and explain what it guarantees.
- How is the average value of a function defined on an interval [a, b]?
- Evaluate (\int_0^1 (x^2 + 3x)dx) using the First Fundamental Theorem of Calculus.
π Lecture 31 β Evaluating Definite Integral by Substitution
π Overview: This lecture covers two main methods for evaluating definite integrals: substitution techniques and approximation by Riemann sums. The substitution methods allow us to transform integrals into simpler forms, while Riemann sums provide numerical approximations when exact evaluation is impossible.
ποΈ Topics Covered
The lecture presents two approaches for evaluating definite integrals: substitution method (with two distinct techniques β evaluating indefinite integral first, or directly substituting with limit changes) and approximation by Riemann sums using regular partitions. Examples demonstrate both substitution methods, including trigonometric substitutions, and a comparison of left endpoint, right endpoint, and midpoint approximations with varying numbers of subintervals.
π Lecture Summary
Evaluating Definite Integrals
The lecture introduces two main approaches for evaluating definite integrals: by substitution and by approximation using Riemann sums.
Evaluating definite integral by substitution
For evaluating the definite integral β«βα΅ f(x)dx by substitution, two methods are presented.
Method 1 involves evaluating the indefinite integral β« f(x)dx by substitution first, then using the relationship: β«βα΅ f(x)dx = [β« f(x)dx]βα΅
Method 2 involves representing the definite integral in the form β«βα΅ f(x)dx = β«βα΅ h(g(x))g'(x)dx, then making the substitution u = g(x), du = g'(x)dx directly into the definite integral. The integration limits must be changed from x-limits to u-limits:
- u = g(a), if x = a
- u = g(b), if x = b
This leaves a new integral in terms of u: β«βα΅ f(x)dx = β«_{g(a)}^{g(b)} h(u)du
π Definition β Substitution Method: A technique for evaluating integrals by replacing a function with a new variable to simplify the integral.
Example 1
Evaluate β«βΒ² x(xΒ² + 1)Β³ dx
Solution using Method 1: Let u = xΒ² + 1, so du = 2xdx β« x(xΒ² + 1)Β³ dx = Β½ β« uΒ³ du = uβ΄/8 + C = (xΒ² + 1)β΄/8 + C β«βΒ² x(xΒ² + 1)Β³ dx = [(xΒ² + 1)β΄/8]βΒ² = (5β΄/8) - (1β΄/8) = 78
Solution using Method 2: u = xΒ² + 1, du = 2xdx u = 1 when x = 0, u = 5 when x = 2 β«βΒ² x(xΒ² + 1)Β³ dx = Β½ β«ββ΅ uΒ³ du = [uβ΄/8]ββ΅ = (5β΄/8) - (1β΄/8) = 78
π Example: Both methods yield the same result of 78, demonstrating their equivalence.
Example 2
Evaluate β«β^{Ο/4} cos(Ο - x)dx
Solution: Let u = Ο - x so that du = -dx u = Ο when x = 0, u = 3Ο/4 when x = Ο/4
β«β^{Ο/4} cos(Ο - x)dx = -β«{Ο}^{3Ο/4} cos(u)du = -(sin(u))|{Ο}^{3Ο/4} = -[sin(3Ο/4) - sin(Ο)] = -[1/β2 - 0] = -1/β2
π Example: The substitution transformed the trigonometric integral into a simpler form.
Approximation by Riemann Sums
A Riemann Sum is the expression Ξ£_{k=1}^{n} f(x*_k)Ξx which approximates the area under a curve. The definite integral is the limit of this sum.
For large n, we can approximate: β«βα΅ f(x)dx β Ξ£_{k=1}^{n} f(x*_k)Ξx
This approximation is useful when exact evaluation is impossible. Using a regular partition of [a,b] gives equal width for each subinterval:
β«βα΅ f(x)dx β Ξx[f(xβ) + f(xβ) + ... + f(x*β)]
This formula produces:
- Left endpoint approximation
- Right endpoint approximation
- Midpoint approximation
depending on the choice of the point x*_k.
Example
Approximate β«βΒΉ β(1 - xΒ²) dx using left endpoint, right endpoint, and midpoint approximations with n=10, n=20, n=50, and n=100 subintervals.
Solution: For n=10, the computation can be done manually. For larger n, a computer is recommended. The results show that the approximations converge toward the exact value as n increases.
The exact value of the integral is Ο/4 β 0.785398163. π‘ Why this matters: The exact value is Ο/4, which is consistent with the computed approximations, demonstrating that Riemann sums approach the true definite integral as the number of subintervals increases.
β Key Takeaways
Students must remember that definite integrals can be evaluated by substitution using either method β evaluating the indefinite integral first or directly substituting with limit changes. When using direct substitution, it is crucial to change the integration limits from x-limits to u-limits. Riemann sums provide approximations when exact evaluation is impossible, and the choice of left endpoint, right endpoint, or midpoint affects the accuracy. The approximation improves as the number of subintervals n increases.
π§ Quick Revision Questions
- What are the two methods for evaluating definite integrals by substitution?
- How do you change the integration limits when using Method 2 for substitution in definite integrals?
- What is the exact value of β«βΒΉ β(1 - xΒ²) dx?
- Why is it necessary to use a regular partition when approximating definite integrals by Riemann sums?
- Compare left endpoint, right endpoint, and midpoint approximations β which is generally more accurate for a given n?
π Lecture 32 β Second Fundamental Theorem of Calculus
π Overview: This lecture introduces the Second Fundamental Theorem of Calculus, which establishes the relationship between differentiation and integration more explicitly. It explains the concept of dummy variables, how to handle definite integrals with variable upper limits, and most importantly, proves that every continuous function has an anti-derivative, even when that anti-derivative cannot be expressed using elementary functions.
ποΈ Topics Covered
The lecture begins by explaining the concept of a dummy variable in integration, showing that changing the variable letter does not change the integral's value. It then introduces definite integrals with variable upper limits, demonstrating how these produce functions rather than numbers. The core topic is the Second Fundamental Theorem of Calculus, which states that the derivative of a definite integral with respect to its upper limit equals the integrand evaluated at that limit. The lecture concludes by discussing the existence of anti-derivatives for all continuous functions and how some functions are necessarily defined in terms of integrals.
π Lecture Summary
Dummy Variable
If we change the letter used for the variable of integration but keep the limits the same, the value of the definite integral remains unchanged. For example, β«_a^b f(x)dx, β«_a^b f(t)dt, and β«_a^b f(y)dy all give the same numerical result. For this reason, we call the letter used for the variable of integration a dummy variable.
π Example: β«_1^2 xΒ² dx = (xΒ³/3)|βΒ² = 8/3 - 1/3 = 7/3; β«_1^2 tΒ² dt = (tΒ³/3)|βΒ² = 7/3; β«_1^2 yΒ² dy = (yΒ³/3)|βΒ² = 7/3
Definite Integrals with variable upper limit of integration
We now consider definite integrals of the form β«_a^x β where the upper limit is a variable rather than a number. In such integrals, we use a different letter for the integration variable to distinguish between the limit of integration and the variable of integration.
π Example: Evaluate β«_2^x tΒ² dt Solution: β«_2^x tΒ² dt = (tΒ³/3)|βΛ£ = xΒ³/3 - 8/3 Note that the result is a FUNCTION of x. In all such integrals with x as a limit, the final result is a function of x.
Second fundamental theorem of Calculus
From Lecture 25, if f is a nonnegative continuous function over [a, b], and A(x) represents the area under the curve y = f(x) over the interval [a, x] as a function of x, then A'(x) = f(x). Writing A(x) as a definite integral: A(x) = β«_aΛ£ f(t)dt. Taking the derivative with respect to x gives: d/dx[A(x)] = A'(x) = d/dx[β«_aΛ£ f(t)dt] = f(x).
Theorem 5.9.1 (2nd fundamental theorem of Calculus):
- If the integrand is continuous, then the derivative of a definite integral with respect to its upper limit is equal to the integrand evaluated at the upper limit.
- The derivative of a function representing the area under the curve of another continuous function f is equal to the function f on a given interval.
The theorem is written as: d/dx[β«_aΛ£ f(t)dt] = f(x)
π Example: Since f(x) = xΒ³ is continuous everywhere, evaluate β«_1Λ£ tΒ³ dt to check the validity of the 2nd fundamental theorem of calculus. Solution: By the 2nd fundamental theorem: d/dx[β«_1Λ£ tΒ³ dt] = xΒ³ Checking by evaluating the integral: β«_1Λ£ tΒ³ dt = (tβ΄/4)|βΛ£ = xβ΄/4 - 1/4 Differentiating this gives xΒ³. β
Existence of Anti-derivatives of continuous functions
If f is a continuous function on an interval I and a is any point in I, then the formula d/dx[β«_aΛ£ f(t)dt] = f(x) tells us that F(x) = β«_aΛ£ f(t)dt is an anti-derivative of f on I. So with the 2nd theorem of calculus, every continuous function on an interval has an anti-derivative on that interval.
π Definition β Anti-derivative: A function F is an anti-derivative of f if F'(x) = f(x) for all x in the interval.
Functions defined by Integrals
It is not always possible to find the anti-derivative of a given function f that is continuous on an interval. When this happens, we get functions (anti-derivatives) that are defined in terms of integrals and nothing simpler that we have seen so far.
π Example: Evaluate β«_1Β³ (1/t) dt Solution: The function 1/t is continuous on [1, 3] so it is integrable. By the 2nd theorem, an antiderivative is F(x) = β«_1Λ£ (1/t) dt. Using the 1st theorem: β«_1Β³ (1/t) dt = F(3) - F(1) = β«_1Β³ (1/t) dt - β«_1ΒΉ (1/t) dt = β«_1Β³ (1/t) dt. But 1/t cannot be integrated using polynomials, rational functions, or any other function we have seen so far. We can approximate this function using numerical methods like Riemann sums. The formula β«_1Λ£ (1/t) dt defines a FUNCTION in terms of integrals.
π‘ Why this matters: This demonstrates that while every continuous function has an anti-derivative, we cannot always express it in closed form using elementary functions. The function β«_1Λ£ (1/t) dt is actually the natural logarithm function ln(x), but at this stage we recognize it as a function defined by an integral.
β Key Takeaways
The dummy variable concept means changing the letter used for integration does not change the integral's value. The Second Fundamental Theorem of Calculus states that the derivative of a definite integral with respect to its upper limit equals the integrand evaluated at that upper limit, expressed as d/dx[β«_aΛ£ f(t)dt] = f(x). This theorem guarantees that every continuous function has an anti-derivative on any interval where it is continuous. Definite integrals with variable upper limits produce functions, not numbers. Some functions, like β«_1Λ£ (1/t) dt, are necessarily defined in terms of integrals because their anti-derivatives cannot be expressed using elementary functions.
π§ Quick Revision Questions
- What is a dummy variable in integration, and why is the term used?
- State the Second Fundamental Theorem of Calculus in both symbolic and verbal form.
- What does the Second Fundamental Theorem of Calculus tell us about the existence of anti-derivatives for continuous functions?
- When evaluating β«_aΛ£ f(t)dt, why is the result a function rather than a number?
- Why might some continuous functions have anti-derivatives that must be expressed as integrals rather than elementary functions?
π Lecture 33 β Application to the Definite Integral
π Overview: This lecture introduces the definite integral as a tool for calculating area, specifically focusing on the area between two curves. It covers how to set up and evaluate integrals for regions bounded by functions of x and by functions of y, including handling intersections and complex regions.
ποΈ Topics Covered
This lecture begins with the area problem between two curves when both functions are expressed in terms of x, including cases where functions take negative values. It then covers the procedure for finding limits of integration from intersection points, with worked examples involving polynomial and radical functions. Finally, it introduces the alternative approach of integrating with respect to y to simplify area calculations for certain regions.
π Lecture Summary
Application of the Definite Integral
The lecture introduces the fundamental application of definite integrals for computing areas, specifically the area between two curves. Two main approaches are presented: integrating with respect to x when the region is bounded above and below by functions of x, and integrating with respect to y when the region is bounded left and right by functions of y.
First Area problem: Area between two curves: Area between y=f(x) and y=g(x)
This section addresses finding the area between two curves defined as functions of x. Suppose that f and g are continuous functions on an interval [a, b] and f(x) β₯ g(x) for a β€ x β€ b (meaning the curve y = f(x) is above y = g(x), and they can touch but not cross). The area A of the region bounded above by y = f(x), below by y = g(x), and on the sides by the lines x = a and x = b is given by the integral of the difference.
If f and g are nonnegative on [a,b], then A = [area under f] β [area under g]. In terms of integrals: A = β«βα΅ f(x)dx β β«βα΅ g(x)dx = β«βα΅ [f(x) β g(x)]dx.
What if f and g take on negative values? This can be remedied by translating the two graphs by a constant m so large that it shifts both f and g above the x-axis. This shift does not affect the area between the two curves because the constants cancel: A = β«βα΅ [f(x) + m]dx β β«βα΅ [g(x) + m]dx = β«βα΅ [f(x) β g(x)]dx.
π Definition β Area Formula (Definition 6.1): If f and g are continuous functions on [a, b], and f(x) β₯ g(x) for all x in [a, b], then the area of the region bounded above by y = f(x), below by y = g(x), on the left by x=a, and on the right by x=b is A = β«βα΅ [f(x) β g(x)]dx.
If the region is complicated, it may require careful thought to determine the integrand and limits of integration. A procedure is to consider a vertical line extending from the bottom curve g(x) to the top curve f(x), with leftmost position x=a and rightmost position x=b.
π Example: Find the area bounded above by y = x + 6, and below by y = xΒ², and on the sides by lines x = 0 and x = 2. Solution: The line extends from f(x) = x + 6 on top to y = xΒ² at the bottom. The leftmost position is x = 0 and rightmost is x = 2. A = β«βΒ² [(x+6) β xΒ²]dx = [xΒ²/2 + 6x β xΒ³/3]βΒ² = (4/2 + 12 β 8/3) β 0 = 2 + 12 β 8/3 = 34/3.
π Example: Find the area enclosed between y = xΒ² and y = x + 6. Solution: There are no lines at the right or left. The integration limits are defined by the points where the two curves intersect. Find these by equating: xΒ² = x + 6 β xΒ² β x β 6 = 0 β (x+2)(xβ3) = 0 β x = β2 and x = 3. A = β«ββΒ³ [(x+6) β xΒ²]dx = [xΒ²/2 + 6x β xΒ³/3]ββΒ³ = (9/2 + 18 β 27/3) β (4/2 β 12 + 8/3) = (9/2 + 18 β 9) β (2 β 12 + 8/3) = (9/2 + 9) β (β10 + 8/3) = (27/2) β (β22/3) = 125/6. π‘ Why this matters: The intersection points provide the limits of integration when boundaries are not explicitly given.
π Example: Find the area enclosed by x = yΒ² and y = x β 2. Solution: First find intersection points. Rewrite y = x β 2 as x = y + 2. Equate: yΒ² = y + 2 β yΒ² β y β 2 = 0 β y = β1 and y = 2. Substitute to get x = 1 and x = 4. From the graph, the upper boundary is y = +β(x). The lower boundary has two pieces: y = ββ(x) for x between 0 and 1, and y = x β 2 for x between 1 and 4. Dividing the region: Region 1: f(x) = +β(x), g(x) = ββ(x), a = 0, b = 1. Aβ = β«βΒΉ [β(x) β (ββ(x))]dx = 2β«βΒΉ β(x) dx = 2[ (2/3) x^(3/2) ]βΒΉ = 4/3. Region 2: f(x) = +β(x), g(x) = x β 2, a = 1, b = 4. Aβ = β«ββ΄ [β(x) β (x β 2)]dx = β«ββ΄ (β(x) β x + 2)dx = [ (2/3) x^(3/2) β xΒ²/2 + 2x ]ββ΄ = (16/3 β 8 + 8) β (2/3 β 1/2 + 2) = 16/3 β (13/6) = 19/6. Total area = Aβ + Aβ = 4/3 + 19/6 = 9/2.
Area between x = v(y) and x = w(y)
We can avoid splitting the region if we integrate with respect to y instead of x. If w and v are continuous functions and if w(y) β₯ v(y) for all y in [c, d], then the area of the region bounded on the left by x = v(y), on the right by x = w(y), below by y = c, and above by y = d is A = β«αΆα΅ [w(y) β v(y)]dy.
The procedure for finding the integrand and limits of integration is the same as for integration with respect to x.
π Example: Find the area enclosed by x = yΒ² and y = x β 2 (or x = y + 2). Solution: Left boundary is x = yΒ². Right boundary is x = y + 2. Limits are from y = β1 to y = 2. A = β«ββΒ² [(y + 2) β yΒ²]dy = [yΒ²/2 + 2y β yΒ³/3]ββΒ² = (4/2 + 4 β 8/3) β (1/2 β 2 + 1/3) = (2 + 4 β 8/3) β (1/2 β 2 + 1/3) = (6 β 8/3) β (β3/2 + 1/3) = (10/3) β (β7/6) = 27/6 = 9/2. π‘ Why this matters: Integrating with respect to y often simplifies area calculations for regions that would require splitting when using x as the variable.
β Key Takeaways
The area between two curves is calculated by integrating the difference of the top function minus the bottom function (for x-integration) or the right function minus the left function (for y-integration). When boundaries are not explicitly given, the limits of integration are found by solving for the intersection points of the curves. Choosing the correct variable of integration can simplify complex problems and avoid splitting the region into multiple integrals. The constant shift method shows that the area formula works even when functions are negative. Always sketch the region first to visualize which curve is on top and to determine the integration limits.
π§ Quick Revision Questions
- What is the general formula for the area between two curves y=f(x) and y=g(x) when f(x)β₯g(x) on [a,b]?
- How do you find the limits of integration when the region is enclosed by two curves without specified side boundaries?
- For the region bounded by x=yΒ² and y=xβ2, why is it easier to integrate with respect to y rather than x?
- When f and g are both negative on some interval, why does the area formula A=β«βα΅ [f(x)-g(x)]dx still work?
- If integrating with respect to y, what must be true about the functions w(y) and v(y) on the interval [c,d]?
π Lecture 34 β Volume by Slicing; Disks and Washers
π Overview: This lecture introduces the concept of computing volumes of three-dimensional solids using definite integrals. It covers the fundamental method of slicing for non-cylindrical solids and applies it specifically to solids of revolution, where volumes are calculated using the disk and washer methods about both the x and y axes.
ποΈ Topics Covered
The lecture begins with a review of cylinders and right cylinders, then introduces the method of slicing to find volumes of solids with varying cross-sections. It presents formulas for volumes by cross sections perpendicular to the x and y axes. The core of the lecture focuses on volumes of solids of revolution, detailing the disk method and the washer method for rotations about both the x-axis and the y-axis, with several examples.
π Lecture Summary
Cylinders
A right cylinder is generated by moving a 2D plane region along a line perpendicular to that region. The volume of any right cylinder is given by the simple formula V = AΒ·h, where A is the area of the planar region (the cross-section) and h is the height of the cylinder.
However, many three-dimensional solids are not right cylinders and cannot be decomposed into a finite number of right cylinders. To find the volume of such irregular solids, we use the technique of slicing.
The method of Slicing
The method of slicing is used to find the volume of a solid where the area of a cross-section changes along its length. Impose an x-axis on the solid such that it is bounded by planes at x = a and x = b. Let A(x) represent the area of a cross-section perpendicular to the x-axis at any arbitrary point x.
To find the total volume, we divide the interval [a, b] into n subintervals of width Ξxβ. We then create slices by passing planes perpendicular to the x-axis through these points. For a thin slice Sβ, the cross-sectional area is approximately constant, so we can choose a point xβ* within the interval and approximate its volume as Vβ β A(xβ)Ξxβ*. Summing all slices gives: V β Ξ£ A(xβ*)Ξxβ
Taking the limit as the number of slices approaches infinity (Ξxβ β 0) gives the exact volume: V = β«βα΅ A(x) dx
π Definition β Slicing Method: A technique to find the volume of a solid by integrating the cross-sectional area A(x) or A(y) along the axis of the solid.
Volumes by cross sections perpendicular to the x axis
This is a direct application of the slicing formula. If the area of a cross-section perpendicular to the x-axis is given by a function A(x), then the total volume of the solid from x = a to x = b is: V = β«βα΅ A(x) dx
π‘ Why this matters: This is the fundamental formula from which the disk and washer methods are derived.
Volumes by cross sections perpendicular to the y axis
Similarly, if the area of a cross-section perpendicular to the y-axis is given by a function A(y), then the total volume of the solid from y = c to y = d is: V = β«αΆα΅ A(y) dy
Volumes of solids of revolution by: Disks perpendicular to x axis
Let f be a nonnegative, continuous function on [a, b]. Consider the region bounded above by y = f(x) and on the sides by x = a and x = b. When this region is revolved around the x-axis, it generates a solid of revolution with circular cross-sections. For a given x, the radius of the circular cross-section is f(x), so its area is A(x) = Ο [f(x)]Β².
Using the slicing formula, the volume is: V = β«βα΅ Ο [f(x)]Β² dx
π Formula: V = β«βα΅ Ο [f(x)]Β² dx β The volume of a solid generated by revolving the curve y = f(x) around the x-axis from x=a to x=b.
π Example 2: Find the volume of the solid generated when the region under the curve y = βx over [1,4] is revolved about the x-axis. Solution: V = β«ββ΄ Ο [βx]Β² dx = β«ββ΄ Ο x dx V = Ο [xΒ²/2]ββ΄ = Ο [(16/2) - (1/2)] = Ο (8 - 0.5) = 15Ο/2
π Example 3: Derive the formula for the volume of a sphere of radius r. Solution: A sphere of radius r is generated by revolving the upper half of the circle xΒ² + yΒ² = rΒ² about the x-axis. The upper half is y = f(x) = β(rΒ² - xΒ²). V = β«βα΅£Κ³ Ο [β(rΒ² - xΒ²)]Β² dx = β«βα΅£Κ³ Ο (rΒ² - xΒ²) dx V = Ο [rΒ²x - xΒ³/3]βα΅£Κ³ = Ο [(rΒ³ - rΒ³/3) - (-rΒ³ + rΒ³/3)] = Ο [(2rΒ³/3) - (-2rΒ³/3)] V = Ο (4rΒ³/3) = 4/3 Ο rΒ³
Volumes by washers perpendicular to x axis
Consider a region bounded by two nonnegative continuous functions f and g, where f(x) β₯ g(x) on [a, b]. When this region is revolved around the x-axis, it generates a solid with a hole in the center. The cross-section is a washer, which is a disk with a smaller disk removed.
The outer radius of the washer is f(x), and the inner radius is g(x). The area of the washer is the difference of the areas of the two circles: A(x) = Ο [f(x)]Β² - Ο [g(x)]Β² = Ο ( [f(x)]Β² - [g(x)]Β² )
The volume of the solid is: V = β«βα΅ Ο ( [f(x)]Β² - [g(x)]Β² ) dx
π Formula: V = β«βα΅ Ο ( [f(x)]Β² - [g(x)]Β² ) dx β The volume of a solid generated by revolving the region between two curves y = f(x) and y = g(x) around the x-axis.
π Example 4: Find the volume of the solid generated when the region between f(x) = Β½ + xΒ² and g(x) = x over [0, 2] is revolved about the x-axis. Solution: V = β«βΒ² Ο { [Β½ + xΒ²]Β² - [x]Β² } dx V = β«βΒ² Ο { [ΒΌ + xΒ² + xβ΄] - xΒ² } dx = β«βΒ² Ο ( ΒΌ + xβ΄ ) dx V = Ο [x/4 + xβ΅/5]βΒ² = Ο [ (2/4) + (32/5) ] = Ο [ 0.5 + 6.4 ] = Ο (6.9) = 69Ο/10
Volume by Disks perpendicular to y axis
Volumes of solids generated by revolving a region around the y-axis can be found similarly. If the region is bounded on the right by a nonnegative, continuous function x = u(y) from y = c to y = d, the cross-section perpendicular to the y-axis is a disk of radius u(y). The volume is: V = β«αΆα΅ Ο [u(y)]Β² dy
Volume by Washers perpendicular to y axis
Similarly, for solids generated by revolving a region around the y-axis where the cross-section is a washer, the volume is given by: V = β«αΆα΅ Ο ( [u(y)]Β² - [v(y)]Β² ) dy where u(y) is the outer radius and v(y) is the inner radius, each defined as functions of y.
β Key Takeaways
The most critical concept from this lecture is the method of slicing, which allows you to calculate the volume of any solid by integrating its cross-sectional area along an axis. For solids of revolution, this method simplifies into the disk method for solids without a hole and the washer method for solids with a hole, with the formulas depending on whether the rotation is about the x-axis (integrating with respect to x) or the y-axis (integrating with respect to y). The key is to correctly identify the outer and inner radii functions of the cross-section. Always remember to set up an integral of the form V = β« A(x) dx or V = β« A(y) dy, where A is the area of a cross-section.
π§ Quick Revision Questions
- What is the fundamental formula for finding the volume of any solid using the slicing method?
- When using the disk method about the x-axis, what does the function f(x) represent in the formula V = β« Ο [f(x)]Β² dx?
- In the washer method for rotation about the x-axis, what is the difference between the radii f(x) and g(x)?
- For a solid generated by rotating a region about the y-axis, when would you use the formula V = β« Ο [u(y)]Β² dy?
- How would you set up the integral to find the volume of a solid generated by revolving the region between x = yΒ² and x = y + 2 around the y-axis?
π Lecture 35 β Volume by Cylindrical Shells
π Overview: This lecture introduces the method of cylindrical shells for computing volumes of solids of revolution. It explains how to derive the volume formula by summing thin cylindrical shells and applies this technique specifically when revolving a region around the y-axis. This method is a powerful alternative to the disk/washer method, especially when integrating with respect to x for rotation about the y-axis.
ποΈ Topics Covered
The lecture begins by defining a cylindrical shell and deriving its volume formula in terms of average radius, height, and thickness. It then shows how to approximate the volume of a solid of revolution by subdividing the region into strips and revolving them to form cylindrical shells. The exact volume is obtained via a limit, leading to the integral formula ( V = \int 2\pi x f(x) , dx ). This is demonstrated with examples, including a region bounded by ( y = \sqrt{x} ) and a region between ( y = x ) and ( y = x^2 ). Finally, the lecture presents a more conceptual view where the volume is understood as the integral of the surface area of the cylindrical shells.
π Lecture Summary
Cylindrical Shells
If we take a washer β a disk with a hole in it β and extend it UP, we generate a solid called a cylindrical shell. This is a solid confined by two concentric right circular cylinders.
The Volume of a cylindrical shell can be expressed as ( V = (area\ of\ cross\ section).(height) = (\pi r_2^2 - \pi r_1^2)h ) ( = \pi (r_2 + r_1)(r_2 - r_1)h ) ( = 2\pi \left[ \frac{1}{2}(r_2 + r_1) \right] . h . (r_2 - r_1) )
Letβs rewrite this rearrangement of the Volume of a cylindrical shell as V = 2Ο (average radius) . (height) . (thickness)
Now we can use this formula to compute the Volume of a Solid generated by revolution of a surface around an axis.
Consider the following. R is a region bounded by the graph of ( f(x) ) on top, below by the x-axis, and to the left by ( x = a ), and right by ( x = b ).
When we revolve R around the y-axis, we get the solid S. To find the volume of S, subdivide [a,b] into n subintervals with widths ( \Delta x_1, ..., \Delta x_n ) by inserting points. If we draw vertical lines from these points to the graph of f, we get subdivisions ( R_1, ..., R_n ) of the region R. Revolving these strips around the y-axis gives solids ( S_1, ..., S_n ).
The solid ( S_k ) is not necessarily a cylindrical shell. However, if the width ( \Delta x_k ) is very small, we can approximate ( R_k ) by a rectangle of width ( \Delta x_k ) and height ( f(x_k^) ), where ( x_k^ = \frac{x_k + x_{k+1}}{2} ) is the midpoint of the interval. Revolving this rectangle around the y-axis gives a cylindrical shell.
The volume ( V(S_k) ) can be approximated using the width ( \Delta x_k ), height ( f(x_k^) ), and average radius ( x_k^ ): ( V(S_k) \approx 2\pi x_k^* f(x_k^*) \Delta x_k )
π Definition β Cylindrical Shell Element: A thin rectangular strip of a region, when revolved around an axis, can be approximated by a cylindrical shell whose volume is given by ( 2\pi \times \text{(average radius)} \times \text{(height)} \times \text{(thickness)} ).
π Formula β Volume by Cylindrical Shells (for revolution around y-axis): The volume of the solid S generated by revolving the region bounded by ( y = f(x) ), the x-axis, ( x = a ), and ( x = b ) about the y-axis is: ( V = \int_a^b 2\pi x f(x) , dx ) β The volume is found by integrating the lateral surface area of the cylindrical shells formed at each x.
π Example 1: Use cylindrical shells to find the volume of the solid generated by the region enclosed between ( y = \sqrt{x} ), ( x = 1 ), ( x = 4 ) and the x-axis is revolved about the y-axis. Solution: Since ( f(x) = \sqrt{x} ), ( a = 1 ), and ( b = 4 ), the volume formula yields: ( V = \int_1^4 2\pi x \sqrt{x} , dx = 2\pi \int_1^4 x^{\frac{3}{2}} , dx ) ( V = 2\pi \left[ \frac{2}{5} x^{\frac{5}{2}} \right]_1^4 = 2\pi \left( \frac{2}{5} \cdot 4^{\frac{5}{2}} - \frac{2}{5} \cdot 1^{\frac{5}{2}} \right) ) ( 4^{\frac{5}{2}} = (4^1)^{\frac{5}{2}} = 2^5 = 32 ), so ( V = 2\pi \left( \frac{2}{5} \cdot 32 - \frac{2}{5} \cdot 1 \right) = 2\pi \left( \frac{64}{5} - \frac{2}{5} \right) = 2\pi \left( \frac{62}{5} \right) = \frac{124\pi}{5} )
Volume through the surface area of a surface created from a cylindrical shell
Instead of thinking of the solid ( S_k ) as having a width ( \Delta x_k ), suppose that it has no width. This would mean that ( S_k ) will be a straight forward right circular cylinder having radius x, height f(x). The surface area of this cylinder will be ( 2\pi x f(x) ).
This is exactly the integrand in the Volume formula we saw earlier. So this really means that:
VOLUME V BY CYLINDRICAL SHELLS IS THE INTEGRAL OF THE SURFACE AREA GENERATED BY AN ARBITRARY SECTION OF THE REGION R TAKEN PARALLEL TO THE AXIS ABOUT WHICH R IS REVOLVED.
This view helps us do calculations in a more general setting where the lower boundary may not be an interval.
π Example 2: Use cylindrical shells to find the volume of the solid when the region R in the first quadrant enclosed between ( y = x ) and ( y = x^2 ) is revolved about the y-axis. Solution: At each x in [0,1], the cross section of R parallel to the y-axis generates a cylindrical surface of height ( x - x^2 ) and radius x. Since the area of the surface is ( 2\pi x (x - x^2) ), the volume is: ( V = \int_0^1 2\pi x (x - x^2) , dx = 2\pi \int_0^1 (x^2 - x^3) , dx ) ( V = 2\pi \left[ \frac{x^3}{3} - \frac{x^4}{4} \right]_0^1 = 2\pi \left( \frac{1}{3} - \frac{1}{4} \right) = 2\pi \left( \frac{4}{12} - \frac{3}{12} \right) = 2\pi \left( \frac{1}{12} \right) = \frac{\pi}{6} )
β Key Takeaways
The cylindrical shell method calculates volume by integrating the lateral surface area of thin cylinders formed when a region is revolved, with the key formula ( V = \int 2\pi \cdot \text{radius} \cdot \text{height} , dx ). The "radius" in the integrand is always the distance from the axis of revolution to the representative slice, and the "height" is the length of the slice parallel to the axis. This method is most useful when revolving around the y-axis and integrating with respect to x, especially when solving for y in terms of x is difficult. For any region, the height of a shell is always (top function) minus (bottom function). For a solid with a hole, the radius is the distance from the axis to the slice, not from the center of the region.
π§ Quick Revision Questions
- What is a cylindrical shell, and how does its volume relate to its average radius, height, and thickness?
- Write the integral formula for the volume of a solid formed by revolving the region bounded by ( y = f(x) ), the x-axis, and ( x = a ), ( x = b ) about the y-axis.
- In Example 2, why is the height of the cylindrical shell given by ( x - x^2 )?
- How does the conceptual view of volume as an integral of surface area help in understanding the shell method formula?
- If you were to revolve the region from Example 2 about the x-axis instead, would the shell method with respect to x be easier or harder? Why?
π Lecture 36 β Length of a Plane Curve
π Overview: This lecture introduces the concept of arc length for smooth curves, moving beyond straight-line measurements to quantify the length of twisting and turning curves. It develops the arc length formula by approximating a curve with polygonal line segments and using the Mean Value Theorem and integration to arrive at a precise method.
ποΈ Topics Covered
The lecture begins by defining the arc length problem for smooth functions on a closed interval. It then explains why traditional straight measuring tools are inadequate for curves and demonstrates how a polygonal path of line segments provides an approximation. Using the distance formula and the Mean Value Theorem, the length of each segment is expressed in terms of the derivative, leading to a Riemann sum. Taking the limit as the number of segments increases yields the definite integral formula for arc length.
π Lecture Summary
Arc Length
We are familiar with measuring the length of a straight line. This section develops methods for finding the length of curves, which are graphs of smooth functions (continuous on a given interval, with a smooth curve). This is known as the ARC LENGTH PROBLEM.
Arc Length Problem: Suppose that f is a smooth function on the interval [a, b]. Find the arc length L of the curve y = f(x) over the interval [a, b].
A key question is how to measure arc length. A straight measuring stick is inaccurate for a curved surface because it will miss the curved distance between two points. However, if two points are extremely close, the distance between them becomes approximately straight, and a straight stick can be used.
The line segments joining points Pα΅’ (i = 1 to n) on the curve form a polygonal path, which serves as a good approximation of the curve's length. Increasing the number of these segments (i.e., making the points closer together) improves the approximation.
In the figure, each point Pα΅’ corresponds to a point xα΅’ on the x-axis in the interval [a, b]. The distances between the xα΅’'s are Ξxβ, Ξxβ, ..., Ξxβ. Consider the k-th line segment, Lβ. Using the distance formula:
Lβ = β( (Ξxβ)Β² + (Ξyβ)Β² )
From the figure, Ξyβ = f(xβ) β f(xβββ). So:
Lβ = β( (Ξxβ)Β² + ( f(xβ) β f(xβββ) )Β² )
The Mean Value Theorem is applied here. Since f is continuous and differentiable, there exists a point xβ between xβββ and xβ such that:
[f(xβ) β f(xβββ)] / [xβ β xβββ] = f'(xβ*)
This implies: f(xβ) β f(xβββ) = f'(xβ*) (xβ β xβββ) = f'(xβ*) Ξxβ
Substituting this into the equation for Lβ:
Lβ = β( (Ξxβ)Β² + ( f'(xβ) Ξxβ)Β² ) = Ξxβ β( 1 + ( f'(xβ*) )Β² )*
This is the length of one segment. The length of the whole polygonal path is the sum of all segments:
β{k=1}^{n} Lβ = β{k=1}^{n} β( 1 + (f'(xβ*))Β² ) Ξxβ
As the number of divisions increases so that the width of the largest subinterval (max Ξxβ) approaches 0, the sum becomes the arc length L of the curve:
L = lim_{max Ξxβ β 0} β_{k=1}^{n} β( 1 + (f'(xβ*))Β² ) Ξxβ
This limit defines a definite integral.
π Definition β Arc Length of a Plane Curve: If f is a smooth function on [a, b], then the arc length L of the curve y = f(x) from x = a to x = b is defined by the integral:
π Formula: L = β«βα΅ β( 1 + [f'(x)]Β² ) dx
Or equivalently: L = β«βα΅ β( 1 + (dy/dx)Β² ) dx
β Key Takeaways
The arc length of a smooth curve cannot be measured accurately with a straight ruler; it requires calculus. The fundamental approach is to approximate the curve with a polygonal path of tiny line segments, then use the Mean Value Theorem to express each segment's length in terms of the derivative. The total length is the limit of a Riemann sum, which becomes a definite integral of a function involving the square of the derivative. The final, essential formula for arc length is L = β«βα΅ β(1 + (f'(x))Β²) dx, which must be memorized and applied to compute the length of any smooth curve over a given interval.
π§ Quick Revision Questions
- What condition must a function f satisfy on [a, b] for its graph to be considered a "smooth" curve suitable for arc length calculation?
- Which theorem from differential calculus is used to express the change in y (Ξyβ) in terms of the derivative and the change in x (Ξxβ) when deriving the arc length formula?
- Write the exact definite integral formula for the arc length L of a curve y = f(x) from x = a to x = b.
- What geometric object is used to approximate the length of a curve before taking the limit to find the exact arc length?
- In the derivation, what does the term Ξxβ β( 1 + (f'(xβ*))Β² ) represent?