π Lecture 23 β MANAGEMENT OF QUALITY
π Overview: This lecture introduces the fundamental concept of quality in production and operations management, emphasizing its role as a key determinant of revenue rather than simply a cost. It covers the historical evolution of quality management from craftsmanship to modern strategic approaches, introduces the philosophies of major quality gurus, and details the dimensions of quality for both products and services, including their practical implications.
ποΈ Topics Covered
The lecture begins by defining quality and contrasting American and Japanese industrial philosophies regarding its role in profitability. It then traces the historical evolution of quality management from pre-industrial revolution craftsmanship through the contributions of Taylor, Shewhart, Deming, Juran, and others, leading to the strategic quality approach. The contributions of seven major quality gurus are summarized. Finally, the lecture explains the eight dimensions of product quality and the seven dimensions of service quality, providing concrete examples from the automobile and auto repair industries.
π Lecture Summary
Introduction
Quality Management is understood through the term quality, which is defined as the ability of a product or service to consistently meet or exceed customer expectations. Quality is a determinant of revenue, not just a cost associated with high prices. The American industry in the 1970s and 80s focused on cost cutting and productivity improvement, neglecting quality management. In contrast, Japanese manufacturers made quality their βHoly Grail,β which allowed them to enter and dominate American markets by offering better products and services, leading to increased revenues and productivity.
π‘ Why this matters: This historical contrast shows that quality is not an expense but a primary driver of competitive advantage and profitability.
Evolution of Quality Management
- Prior to Industrial Revolution: Skilled craftsmen performed all stages of production, with pride in workmanship and reputation forming the basis of quality.
- After Industrial Revolution: Specialization and division of labor made each worker responsible for a small portion of work, leading to a loss in pride of workmanship and a failure to produce quality products.
- Frederick Winslow Taylor, the father of scientific management, brought back quality through product inspection and a focus on manufacturing management.
- G.S. Radford introduced quality in the product design stage, linking high quality with increased productivity and lower costs.
- 1924: W. Shewhart of Bell Technologies introduced Statistical Process Control charts.
- 1930: H.F. Dodge and H.G. Romig of Bell Technologies introduced Tables for acceptance sampling.
- 1940βs: Universities, Bell Technologies, and the US Army used statistical sampling techniques. The American Society for Quality Control (ASQC, now ASQ) was formed.
- 1950βs: The era of Quality assurance/TQC with Deming, Juran, and Feigenbaum changed quality concepts forever.
- 1960βs: Zero defects was championed by Phillip Crosby, producing perfect missiles for the US Army.
- 1970βs: Quality assurance expanded into services like healthcare, banking, and travel.
- Late 1970s: The quality assurance concept evolved into a Strategic quality approach, advocated by Harvard Professor David Garvin, which focuses on preventing mistakes from occurring altogether.
Quality Assurance vs. Strategic Approach
- Strategic Approach is the superlative form of quality assurance.
- Quality Assurance emphasizes finding and correcting defects before reaching the market (reactive).
- Strategic Approach is proactive, focusing on preventing mistakes from occurring and placing greater emphasis on customer satisfaction.
Quality Guru
The key contributors to Quality Management are:
- Walter Shewhart: Known as the βFather of statistical quality control.β
- W. Edwards Deming: Presented 14 points for quality management, focusing primarily on common causes of variation.
- Joseph M. Juran: Famous for his concept, βQuality is fitness for use.β
- Armand Feigenbaum: Said, βQuality is a total field or total function.β
- Philip B. Crosby: Famous for the philosophy that βQuality is free.β
- Kaoru Ishikawa: Presented the βfish bone diagramβ or βcause effect diagram.β
- Genichi Taguchi: Developed robust design for designing products insensitive to change in the environment. His contribution is the Taguchi loss function.
Dimensions of Quality
Customers value a product based on different dimensions of quality. Quality and Operations Managers must understand these customer perceptions.
Dimensions for Products (e.g., Automobile):
- Performance: Main characteristics of the product/service (e.g., everything works, fit & finish, ride, handling).
- Aesthetics: Appearance, feel, smell, taste (e.g., interior design, soft touch).
- Special Features: Extra characteristics (e.g., cellular phone, CD player).
- Conformance: How well product/service conforms to customerβs expectations.
- Reliability: Consistency of performance (e.g., infrequency of breakdowns).
- Durability: Useful life of the product/service (e.g., useful life in miles, resistance to rust & corrosion).
- Perceived Quality: Indirect evaluation of quality, e.g., reputation (e.g., a top-rated car).
- Serviceability: Service after sale (e.g., handling of complaints and/or requests for information).
Service Quality
The dimensions of quality for services include:
- Tangibles: Were the facilities clean, personnel neat?
- Convenience: Was the service center conveniently located?
- Reliability: Was the problem fixed?
- Responsiveness: Was customer service personnel willing and able to answer questions?
- Time: How long did the customer wait?
- Assurance: Did the customer service personnel seem knowledgeable about the repair?
- Courtesy: Were customer service personnel and the cashier friendly and courteous?
β Key Takeaways
The most critical concept from this lecture is that quality is defined as the ability to consistently meet or exceed customer expectations and is a primary driver of revenue and competitive advantage, not just an added cost. The evolution of quality management shows a clear progression from reactive inspection and defect-finding (Quality Assurance) to a proactive, preventative Strategic Approach. Students must recognize the contributions of key quality gurus like Deming (14 points), Juran (fitness for use), Crosby (quality is free), and Taguchi (loss function). Finally, a thorough understanding of the eight dimensions of product quality and the seven dimensions of service quality is essential for applying these concepts to real-world operations.
π§ Quick Revision Questions
- What is the formal definition of "quality" as taught in the context of operations management?
- How does a "Strategic Approach" to quality differ from "Quality Assurance"?
- Which quality guru is associated with the "fish bone diagram" and which is known for the "Taguchi loss function"?
- List any four of the eight dimensions of quality for a product, using examples from the automobile industry.
- Name three specific dimensions of service quality and explain what each one means for a customer.
π Lecture 24 β SERVICE QUALITY
π Overview: This lecture explores the critical dimensions of service quality and the systematic gaps that can occur between customer expectations and actual service delivery. It explains how organizations can diagnose quality problems using the SERVQUAL gap model and design quality into services using methods like Taguchi, poka-yoke, and Quality Function Deployment. Understanding these concepts is essential for delivering consistent, high-quality service that meets or exceeds customer expectations.
ποΈ Topics Covered
The lecture begins by introducing the concept of "Moments of Truth" in customer contact, then details the five dimensions of service quality: Reliability, Responsiveness, Assurance, Tangibles, and Empathy (RATE). It presents the Perceived Service Quality model and the Service Quality Gap Model (SERVQUAL), analyzing all five gaps in depth. The lecture then covers Quality Service by Design, including the Service Package, Taguchi Methods, Poka-Yoke, and Quality Function Deployment. It concludes with strategies for achieving service quality, including a bank example of quality costs and a control chart for departure delays.
π Lecture Summary
Moments of Truth
Each customer contact between the service provider and customer is called a moment of truth. An organization has the ability to either satisfy or dissatisfy customers when they contact them. A service recovery is satisfying a previously dissatisfied customer and making them a loyal customer.
Dimensions of Service Quality
Dimensions for Service Quality are similar to those associated with Quality in General. Customers always seek reliability, agility (prompt responsiveness), assurance, tangibility, and empathy. These dimensions help customers rate and distinguish one service provider from another. Organizations often use a performance measure matrix called RATE based on the 5 dimensions:
- Reliability: Perform promised service dependably and accurately.
- Responsiveness: Willingness to help customers promptly.
- Assurance: Ability to convey trust and confidence.
- Tangibles: Physical facilities and facilitating goods.
- Empathy: Ability to be approachable.
In RATE, R represents Reliability and Responsiveness, A represents Assurance, T represents Tangibles, and E represents Empathy.
Perceived Service Quality
A customer's required service is not provided primarily because of a gap between Service Quality Dimensions and Service Quality Assessment by the customer. The Service Quality Assessment depends on the relationship between expected service (ES) and perceived service (PS):
- Expectations exceeded: ES < PS (Quality surprise)
- Expectations met: ES ~ PS (Satisfactory quality)
- Expectations not met: ES > PS (Unacceptable quality)
π‘ Why this matters: This framework shows that quality is not absoluteβit is defined by the customer's perception relative to their expectations.
Service Quality Gap Model
The Service Quality Gap Model captures the gaps that exist between service provided and service demanded. The model shows how customer expectations are influenced by word of mouth, personal needs, and past experience. These expectations are compared with perceived service, leading to customer satisfaction or dissatisfaction.
π Definition β SERVQUAL: A popular assessment tool in service quality that involves a set of the 5 most important dimensions of quality according to customer rankings, and a set of 5 gaps representing the difference between customers' expectations and perceptions (the difference between expected level of service vs. actual level of service provided). SERVQUAL stands for SERVICE QUALITY.
Servqual Model Gaps
Gap 1: The difference between actual customer expectations and management's idea or perception of customer expectations. Managers and employees have a very internal process-oriented view of their business; it is tough to break this view and see things the way the customer does. This gap can help management understand customer service needs.
Gap 2: Mismatch between manager's expectations of service quality and service quality specifications. To improve this gap, management must first understand exactly what the customer wants. If this understanding is absent, it will be impossible for management to know whether their expectations are aligned with customer specifications.
Gap 3: Poor delivery of service quality. Once specifications from gap 2 are aligned, the next step is to deliver these services perfectly. Quality of delivery must be perfected during interaction with the customer. The employees responsible for these actions are contact personnel. Reasons for lack of quality include poor training, communication, and preparation.
Gap 4: Differences between service delivery and external communication with the customer. Customers are influenced by what they hear and see about a company's service. Word-of-mouth publicity and advertising are main outlets for customer opinions. The difference between what a customer hears about a company's service and what is actually delivered is represented by gap 4. This gap can lead to dangerously negative customer perceptions.
Gap 5: Differences between Expected and Perceived Quality. This gap is directly related to everyone's perception of service quality. Customers expect certain things from certain companies. If gaps 1 through 4 are closed to a minimum, then gap 5 should follow. If gaps remain in steps 1 through 4, perceived customer service quality will be negatively affected. The way to close these gaps is through thorough systems design, precise communication with customers, and a well-trained workforce.
π Example: When someone goes into a McDonald's to order a Big Mac, they expect exactly what they are accustomed to getting (a quick, no hassle, tasty big burger with all the works). If it takes 15 minutes to get a Big Mac that doesn't even have the famous special sauce on it, the customer's perceived service of McDonald's will plummet.
Quality Service by Design
-
Quality in the Service Package: Quality-based service should be offered at the same price. Club class passengers in an airline, though provided additional luxury, are not able to bring enough revenue. An airline that does not add quality would lose out to its competitors.
-
Taguchi Methods (Robustness): Relate to quality-based methods being able to deliver under all possible environments. If a company is unable to offer after-sales service to a customer at any particular place in the same country, it would simply lose out to its competitors.
-
Poka-Yoke: Poka Yoke (pronounced POH-kah YOH-kay) is the Japanese word for mistake proof. In services, a simple mistake can have dire consequences (e.g., a hair stylist giving a wrong haircut). These devices/strategies/mechanisms/methods are used either to prevent special causes that result in defects, or to inexpensively inspect each item to determine whether it is acceptable or defective.
Classification of Service Failures with Poka-Yoke Opportunities:
- Server Errors:
- Task: Doing work incorrectly
- Treatment: Failure to listen to customer
- Tangible: Failure to wear clean uniform
- Customer Errors:
- Preparation: Failure to bring necessary materials
- Encounter: Failure to follow system flow
- Resolution: Failure to signal service failure
- Quality Function Deployment (QFD): Also known as House of Quality, it is an important tool of Quality Management that allows a company not only to benchmark itself with industry leaders but also to review its internal operations critically.
π Definition β House of Quality: A matrix that helps an organization focus on critical characteristics of a new or existing product or service from the separate viewpoints of customer market segments, company, or technology-development needs. It maps customer expectations (Reliability, Responsiveness, Assurance, Empathy, Tangibles) against service elements (Training, Attitude, Capacity, Information, Equipment) and shows relationships, comparisons with competitors, and weighted scores.
π‘ Why this matters: Quality in design ensures safe and reliable operations of the service. If a service provider fails to include quality, provide consistent service, implement mistake-proofing, or deploy QFD, they will lose customers, competitive advantage, revenue, and face increased costs.
Achieving Service Quality
Service Quality can be achieved by making use of the following strategies:
- Cost of Quality
- Service Process Control
- Statistical Process Control (SPC)
- Unconditional Service Guarantee
Quality is offered free of cost. As prevention is better than cure, it makes more sense to incur cost in prevention of defects instead of allowing defects to occur and then rectifying them. Statistical Process Control is an important tool to ensure Service Quality is achieved before a defect is introduced.
Costs of Service Quality (Bank Example)
This example shows how a weak design service can incur loss in customer service, leading to loss in revenues. Prevention costs are more beneficial compared to detection and failure costs. As a rule of thumb, prevention costs are half the detection costs and about 12 to 16% of failure costs.
| Failure Costs | Detection Costs | Prevention Costs |
|---|---|---|
| External failure: Loss of future business, negative word-of-mouth, liability insurance, legal judgments, interest penalties | Process control, Peer review, Supervision, Customer comment card, Inspection | Quality planning, Training program, Quality audits, Data acquisition and analysis, Recruitment and selection, Supplier evaluation |
| Internal failure: Scrapped forms, Rework | ||
| Recovery: Expedite disruption, Labor and materials |
Control Chart of Departure Delays
Using statistics to improve service quality, a control chart can be constructed for flight delays. The chart identifies a Lower Control Limit (LCL) and an Upper Control Limit (UCL).
π Formula:
- ( UCL = \bar{p} + 3 \sqrt{\frac{\bar{p}(1-\bar{p})}{n}} )
- ( LCL = \bar{p} - 3 \sqrt{\frac{\bar{p}(1-\bar{p})}{n}} )
Where ( \bar{p} ) is the average proportion of defective items (e.g., delayed flights), and n is the sample size.
π Example: The lecture provides a control chart showing the percentage of flights on time. For example, if expected on-time performance is 80%, with LCL at approximately 70% and UCL at approximately 90%, any data point outside these limits signals a special cause that needs investigation.
β Key Takeaways
A student must remember that service quality is defined by the customer's perception relative to their expectations, measured across five dimensions (Reliability, Responsiveness, Assurance, Tangibles, Empathy). The SERVQUAL model identifies five distinct gaps that can cause quality failuresβfrom misunderstanding customer needs (Gap 1) to failing to deliver on promises (Gap 4). Quality must be designed into services using proactive methods: Taguchi for robustness under all conditions, poka-yoke for mistake-proofing, and QFD for aligning customer requirements with service design. Prevention costs are significantly lower than detection and failure costs, making statistical process control and unconditional service guarantees essential strategies for achieving consistent service quality.
π§ Quick Revision Questions
- What are the five dimensions of service quality, and what does the acronym RATE stand for?
- Describe the three possible outcomes of the Perceived Service Quality assessment (ES vs. PS).
- What is the difference between Gap 1 and Gap 2 in the SERVQUAL model, and what causes each?
- How can poka-yoke be applied to prevent server errors in a service setting? Give one example for each server error category (Task, Treatment, Tangible).
- Why are prevention costs considered more beneficial than detection or failure costs, and what is the approximate cost ratio between them?
π Lecture 25 β Total Quality Management
π Overview: This lecture introduces Total Quality Management (TQM) as a broad organizational philosophy that involves every individual in continual improvement to achieve customer satisfaction. It covers the TQM approach across departments, common criticisms, key elements such as continuous improvement and quality at the source, determinants of quality, consequences of poor quality, departmental responsibilities, and the costs associated with TQM. Understanding TQM is crucial for aligning all organizational functions toward quality-driven strategy and operational excellence.
ποΈ Topics Covered
The lecture begins by defining Total Quality Management as a philosophy and outlining the TQM approach across five key departments: Marketing, Design, Operations, Senior Management, and Supply Chain. It then presents common criticisms of TQM, followed by the core elements of TQM including continuous improvement (Kaizen), quality at the source, and employee empowerment. The determinants of quality are explained: design, conformance, ease of use, and service after delivery. The consequences of poor qualityβloss of business, liability, productivity loss, and increased costsβare discussed next. Responsibility for quality is assigned to all departments, from top management to customer service. Finally, the costs of TQM are detailed: failure costs (internal and external), appraisal costs, and prevention costs, concluding with a discussion of the link between quality and ethics.
π Lecture Summary
Total Quality Management (Definition)
Total Quality Management is a philosophy that involves each and every individual in an organization in a continual effort to improve quality and achieve customer satisfaction. It is a common viewpoint and attitude shared by the whole organization that helps achieve increased revenue and continuous customer relationships by providing quality-based service fulfilling customer needs.
The TQM Approach
When applying the TQM approach, various departments and interfaces play specific roles. If these departmental roles are not aligned with the organizational strategy, the organization cannot pursue TQM effectively.
| Sr. # | TQM Approach | Department |
|---|---|---|
| 1 | Find out what the customer wants | Marketing |
| 2 | Design a product or service that meets or exceeds customer wants | Design Dept |
| 3 | Design processes that facilitates doing the job right the first time | Operations Dept |
| 4 | Monitor and Audit (Keeping track of) results | Senior/GM Managers |
| 5 | Extend these concepts to suppliers | SCM / Logistics / Warehouse / Materials |
TQM Criticisms
TQM philosophy is often criticized, but these criticisms usually reflect weak implementation or poor management perspective, not flaws in the philosophy itself. Common criticisms include:
- TQM program not linked to overall Organizational Strategy β a weakness of top management.
- Quality-based decisions not attached to revenue or marketing strategies β quality should be included in functional departments.
- Incomplete planning with no clear cut road map for TQM implementation.
- Rigid and impractical TQM goals β goals should be achievable and tangible.
- Non-training of employees about TQM philosophy.
Elements of TQM
TQM is a philosophy whose elements consist of various strategies and tactics:
- Continual improvement
- Competitive benchmarking
- Employee empowerment
- Team approach
- Decisions based on facts
- Knowledge of tools
- Supplier quality
- Champion
- Quality at the source
- Suppliers
π Definition β Continuous Improvement: Philosophy that seeks to make never-ending improvements to the process of converting inputs into outputs. The Japanese word for continuous improvement is Kaizen.
π Definition β Quality at the Source: The philosophy of making each worker responsible for the quality of his or her work.
Determinants of Quality
- Quality of design: Intention of designers to include or exclude features in a product or service.
- Quality of conformance: The degree to which goods or services conform to the intent of the designers.
- Quality of Ease of Use: Ease of use and instructions increase the chances, but do not guarantee, that a product will be used for its intended purpose and function properly and safely.
- Quality of Service after Delivery: The degree to which goods or services can be recalled and repaired, adjusted, replaced, or bought back, or reevaluation of service.
π‘ Why this matters: These four determinants provide a complete framework for evaluating product and service quality from design through post-delivery support.
The Consequences of Poor Quality
- Loss of business: Loss in sales, revenues, and customer base.
- Liability: A poor quality product or service carries the danger of the organization being taken to court by an unhappy or affected customer.
- Productivity: Loss in productivity as more time is spent rectifying errors or shortcomings rather than producing more.
- Costs: Increase in costs as a poor quality product is repaired, replaced, or made new.
Responsibility for Quality
Quality Control Department cannot be held responsible for quality alone. Quality is the responsibility of each and every individual working for the organization. Departments responsible include:
- Top management
- Design Department
- Procurement Department
- Production/Operations Department
- Quality assurance Department
- Packaging and shipping Department
- Marketing and sales Department
- Customer service Department
Costs of Total Quality Management
There is a difference of opinion among experts regarding cost analysis with respect to TQM. Some experts feel failure costs should be taken as internal and external separately, while others feel they should be taken as a single entity.
-
Failure Costs β costs incurred by defective parts/products or faulty services. On average, an organization loses 20 to 30% of its revenue because of poor quality or costs associated with failure. a. Internal Failure Costs are costs incurred to fix problems detected before the product/service is delivered to the customer. These are less painful and help an organization register increased revenue without compromising its product/service in the eyes of customers or competitors. b. External Failure Costs are all costs incurred to fix problems detected after the product/service is delivered to the customer.
-
Appraisal Costs are the costs of activities designed to ensure quality or uncover defects.
-
Prevention Costs include all TQM training, TQM planning, customer assessment, process control, and quality improvement costs to prevent defects from occurring.
Quality and Ethics
Quality is closely associated with Ethics. A good service will always fulfill customer needs if it follows ethics in its true spirit. A poorly designed product or service carries liability. If the organization follows ethics to manufacture a product or service, it will provide a quality product or service to its customer.
TQM is followed by various departments: Accounting measures costs associated with poor quality; Finance measures cash flows; Human Resources empowers workforce for quality work; Management Information Systems designs TQM-based systems for increased productivity; Marketing uses TQM techniques to increase market share and customer base; and Operations designs and implements TQM strategies.
β Key Takeaways
TQM is a comprehensive organizational philosophy requiring involvement from every individual and department, not just a quality control function. The five-step TQM approach clearly assigns roles from marketing (identifying customer wants) through to extending concepts to suppliers. Continuous improvement (Kaizen) and quality at the source are fundamental elementsβthe former focuses on never-ending improvements, and the latter makes each worker responsible for their own work quality. The four determinants of quality (design, conformance, ease of use, and service after delivery) provide a complete framework, and the three cost categories (failure, appraisal, and prevention) show that prevention costs are far more effective than dealing with internal or external failure costs. Finally, quality is inseparable from ethics, and poor quality leads to severe consequences including loss of business, liability, productivity loss, and increased costs.
π§ Quick Revision Questions
- What are the five steps in the TQM approach and which department is responsible for each?
- What is the difference between internal failure costs and external failure costs? Which is more damaging to the organization's reputation?
- Explain the concept of "Quality at the Source" and how it differs from traditional quality inspection approaches.
- List and briefly describe the four determinants of quality discussed in the lecture.
- What percentage of an organization's revenue is typically lost due to poor quality, and which category of TQM costs does this loss fall under?
π Lecture 26 β Total Quality Management (Contd.)
π Overview: This lecture continues the exploration of Total Quality Management (TQM) with a deep dive into the Six Sigma concept from both managerial and technical perspectives. It covers the Deming Wheel (PDSA Cycle), seven common tools of quality, statistical process control, and benchmarking, providing a comprehensive framework for implementing and sustaining quality initiatives in operations.
ποΈ Topics Covered
The lecture covers ISO certifications (ISO 14000 and ISO 9000), Six Sigma concepts including its statistical definition, managerial and technical aspects, team structure, process stages, and obstacles to implementation. It also addresses criticisms of TQM, basic problem-solving steps, process improvement approaches, the PDSA Cycle (Shewhart Cycle/Deming Wheel), the seven basic tools of quality, quality circles, and the benchmarking process.
π Lecture Summary
ISO Certifications
Quality Certification ensures that an organization has achieved TQM philosophy. The two popular certifications pursued by organizations include ISO 14000 and ISO 9000.
π Definition β ISO 14000: A set of international standards for assessing a companyβs environmental performance.
π Definition β ISO 9000: A set of international standards on quality management and quality assurance, critical to international business.
Six SIGMA
Statistically speaking, a process is said to be in the Six Sigma stage if it does not have more than 3 or 4 defects per million. Most organizations measure their quality program in terms of Six Sigma. Conceptually, the Six Sigma Program is designed to reduce defects and requires the use of certain tools and techniques.
Six Sigma Programs are always directed towards quality improvement, cost cutting, and time saving. They are employed in design, production, service, operation management, inventory management, and delivery.
The Six Sigma Management characteristics include providing strong leadership, defining performance merits, selecting projects likely to succeed, and selecting and training appropriate people.
The Technical aspects of Six Sigma include improving process performance, reducing variation, utilizing statistical models, and designing a structured improvement strategy.
π‘ Why this matters: Six Sigma integrates managerial strategy with technical tools to systematically reduce defects and costs, making it a powerful approach for operational excellence.
Six Sigma Team
Six Sigma Teams are formed for implementing Six Sigma in true spirit, keeping in mind both managerial and technical aspects. The team hierarchy includes top management, program champions, Master "Black Belts", "Black Belts", and "Green Belts".
Six Sigma Process
The Six Sigma Process has various stages. Quality experts normally identify the following 5 stages: Define, Measure, Analyze, Improve, and Control.
Obstacles to Implementing Six Sigma (TQM)
Obstacles include the lack of: company-wide definition of quality, strategic plan for change, customer focus, real employee empowerment, strong motivation, time to devote to quality initiatives, leadership, poor inter-organizational communication, view of quality as a "quick fix", emphasis on short-term financial results, and internal political and "turf" wars.
Criticisms of TQM
Criticisms include blind pursuit of TQM programs, programs not being linked to strategies, quality-related decisions not being tied to market performance, and failure to carefully plan a program.
Basic Steps in Problem Solving
The problem-solving method involves analyzing the problem, generating pragmatic solutions, and implementing the best solution. The steps are: define the problem and establish an improvement goal, collect data, analyze the problem, generate potential solutions, choose a solution, implement the solution, and monitor the solution to see if it accomplishes the goal.
Process Improvement
A systematic approach to improving a process always results in process improvement. Common approaches include process mapping, analyzing the process, and redesigning the process.
Process mapping consists of collecting information about the process, identifying the process for each step, and determining the inputs and outputs.
To analyze the process, ask questions including whether the process flow is logical, any activities or steps are missing, or duplication activities exist. Questions about each step include: is a particular step necessary, does the step add value, does it generate waste, could the time to perform the step be reduced, and could two or more steps be combined.
To redesign the process, take a fresh approach to solve an issue at hand.
The PDSA Cycle (Shewhart Cycle/Deming Wheel)
The concept of the PDCA Cycle was first introduced by Walter Shewhart and is often referred to as 'the Shewhart Cycle'. It was promoted effectively from the 1950s on by W. Edwards Deming and is consequently known as 'the Deming Wheel'. It is a continuous process that enables the operations manager to check the work at various stages. The PDCA Cycle is a checklist of the four stages to get from 'problem-faced' to 'problem solved'.
The four stages of PDCA/Shewhart Cycle or Deming Wheel are PLAN, DO, CHECK, and ACT.
In the PLAN stage: study and document the existing process, collect data to identify problems, survey data and develop a plan for improvement, and specify measures for evaluating the plan.
In the DO stage: implement the plan on a small scale, document any changes made during this phase, and collect data systematically for evaluation.
In the CHECK stage: evaluate the data collection during this phase and check how closely the results match the original goals of the plan phase.
In the ACT stage: if the results are successful, standardize the new method and communicate it to all people associated with the process, implement training for the new method. If results are unsuccessful, revise the plan and repeat the process or cease this project.
π‘ Why this matters: The PDSA Cycle provides a structured, iterative approach to problem-solving and continuous improvement, ensuring that changes are tested and validated before full-scale implementation.
Seven Basic Tools
The Seven Basic Tools of quality are: Check Sheet, Flow Chart, Histogram, Pareto Chart, Scatter Diagram, Cause & Effect Diagram, and Statistical Process Control.
Quality Circles
Quality Circles use a team approach and techniques including list reduction, balance sheet, and paired comparisons.
Benchmarking Process
The Benchmarking Process involves identifying a critical process that needs improving, identifying an organization that excels in this process, contacting that organization, analyzing the data, and improving the critical process.
β Key Takeaways
For the exam, remember that Six Sigma statistically means no more than 3-4 defects per million opportunities, and it integrates both managerial aspects (leadership, project selection) and technical aspects (variation reduction, statistical models). The PDSA (Plan-Do-Study-Act) Cycle, also known as the Shewhart Cycle or Deming Wheel, is a continuous improvement framework with four stages. The seven basic tools of quality include check sheets, flow charts, histograms, Pareto charts, scatter diagrams, cause-and-effect diagrams, and statistical process control. Benchmarking involves learning from best-in-class organizations to improve critical processes, while ISO 9000 and ISO 14000 are key international certifications for quality management and environmental performance respectively.
π§ Quick Revision Questions
- What is the statistical definition of a process being in the Six Sigma stage?
- List the five stages of the Six Sigma Process (DMAIC).
- What are the four stages of the PDSA Cycle (Deming Wheel)?
- Name the seven basic tools of quality.
- What are the key differences between ISO 14000 and ISO 9000 certifications?