π Lecture 23 β International Trade Theory
π Overview: This lecture explores various international trade theories that explain why and how countries engage in cross-border trade. It covers classical models like the factor-proportions theory, dynamic models like the product life cycle theory, and contemporary frameworks such as the Porter Diamond, helping students understand the complex factors driving global trade patterns.
ποΈ Topics Covered
The lecture examines the Heckscher-Ohlin factor-proportions theory including land-labor and labor-capital relationships, the product life cycle theory of trade with its four stages, country similarity theory focusing on economic, location, cultural, and political similarities, the degree of dependence including independence, interdependence, and dependence, strategic trade policy approaches, and the Porter Diamond model of national competitive advantage with its four determinants and limitations.
π Lecture Summary
The Factor-Proportions Theory
The Heckscher-Ohlin theory of factor endowment extends comparative advantage by considering a nationβs endowment and cost of factors of production. The theory holds that a country will tend to export products that utilize factors of production relatively abundant in that nation.
π Definition β Factor-proportions theory: A country will export products that use factors of production that are relatively abundant in that nation.
Land-Labor Relationship
In countries with many people relative to the size of available land, labor would be relatively cheap. Therefore, those countries should concentrate on producing and exporting labor-intensive goods.
π Formula: Abundant labor + Scarce land β Cheap labor β Specialization in labor-intensive goods
Labor-Capital Relationship
In countries where little capital is available for investment and investment per worker is low, low labor rates are expected. Again, those countries should concentrate on producing and exporting labor-intensive goods. The fact that labor skills vary across countries has led to international task specialization with respect to national production activities.
π‘ Why this matters: These relationships explain why developing countries with abundant labor but scarce capital tend to export textiles and agricultural products, while capital-rich countries export manufactured goods.
Technological Complexities
Factor proportions analysis becomes complicated when the same product can be produced by different methods, such as with different mixes of labor and capital. Managers must consider the cost in each locale based on the type of production that will minimize costs there.
π Example: A product like clothing can be produced using labor-intensive hand sewing in Bangladesh or capital-intensive automated factories in Germanyβthe optimal method depends on local factor costs.
The Product Life Cycle Theory of Trade
Vernonβs international product life cycle (PLC) describes how the location of production and trade activities shifts as a product moves through its life cycle. A great majority of new technology originates in industrial countries.
Changes through the Cycle
The product life cycle has four distinct stages:
Introduction: Innovation, production and sales occur in the domestic (innovating) country. The product is not yet standardized, the production process tends to be relatively labor intensive, and innovative customers accept relatively high introductory prices.
Growth: As demand grows, competitors enter the market. Foreign demand, competition, exports, and often direct investment activities begin to accelerate.
Maturity: Global demand begins to peak, production processes are relatively standardized, and global price competition forces production site relocation to lower-cost developing countries.
Decline: Market factors and cost pressures dictate that almost all production occur in developing countries. The product is then imported by the country where it was initially developed.
π Example: Personal computers were invented in the USA (Introduction), exported globally during Growth, standardized and mass-produced in Asia during Maturity, and now most production occurs in China/Vietnam with developed countries importing them (Decline).
Verification and Limitations of the PLC Theory
Exceptions to the typical pattern include: products that have very short life cycles, luxury goods, products that require specialized labor, products that can be differentiated, and products for which transportation costs are relatively high.
π‘ Why this matters: The PLC theory helps explain why manufacturing shifts from developed to developing countries over time, but fails for complex or customized products where production remains in the innovating country.
Country Similarity Theory
Previously examined theories suggest greater dissimilarity among countries leads to greater trade potential. However, the country similarity theory states that when a firm develops a new product in response to observed conditions in the home market, it is likely to turn to those foreign markets most similar to its domestic market when commencing initial international expansion.
π Definition β Country similarity theory: Firms initially expand internationally to markets most similar to their home market.
The Economic Similarity of Industrial Countries
So much trade occurs among industrialized countries because of the growing importance of acquired advantage (skills and technology). Markets in most industrialized countries are large enough to support new product introductions and their subsequent variants across the life cycle.
The Similarity of Location
Countries near each other enjoy relatively lower transportation costs than those more distant. While the disadvantages of distance may be overcome through innovative technology and marketing methods, such gains are difficult to maintain in the long run.
Cultural Similarity
Cultural similarity as expressed through language and religion is a major facilitator of the international trade and investment process.
The Similarity of Political and Economic Interests
Countries that agree politically and are economically similar are likely to encourage trade among themselves. In some circumstances, they may also discourage trade with countries with whom they disagree.
π Example: The European Union represents countries with similar economic development, political systems, and geographic proximity that trade extensively among themselves.
Degree of Dependence
Theories of independence, interdependence, and dependence help explain world trade patterns and countriesβ trade policies. Countries are located along a continuum between the two extremes.
Independence: Under conditions of independence, a country would not rely on other countries for any goods, services, or technologies.
Interdependence: One way a country can limit its vulnerability to foreign changes is through interdependenceβthe development of trade relationships on the basis of mutual need. Each country depends about equally on the other, so neither is likely to cut off supplies or markets for fear of retaliation.
Dependence: Many developing countries are dependent (rely on) on the sale of one primary commodity, or on one country as a primary customer and/or supplier. Emerging economies largely depend on production processes that compete on the basis of low-wage inputs.
π Example: Saudi Arabia's dependence on oil exports makes it vulnerable to global oil price fluctuations and demand changes.
Strategic Trade Policy
Governments have long debated their roles in affecting the acquired advantage of production within their borders. From the standpoint of national competitiveness, the issue revolves around the development of successful industries. The two basic approaches to strategic trade policy are (a) alter conditions that will affect industry in general or (b) alter conditions that will affect a targeted industry.
Why Companies Trade Internationally
Regardless of the advantages a country may gain by trading, international trade will not ordinarily occur unless companies within that country have competitive advantages and perceive that international opportunities are greater than domestic ones.
The Porter Diamond
In addition to the four determinants of national competitive advantage set forth in the Porter diamond, the roles of chance and government are also critical. Usually all four determinants need to be favorable if a given national industry is going to attain global competitiveness.
π Definition β Porter Diamond: A framework identifying four determinants of national competitive advantage.
The four determinants are:
Demand Conditions: The nature and size of demand in the home market lead to the establishment of production facilities to meet that demand.
Factor Conditions: Resource availability (inputs, labor, capital, and technology) contributes to the competitiveness of both firms and nations that compete in particular industries.
Related and Supporting Industries: The local presence of internationally competitive suppliers and other related industries contributes to both cost effectiveness and strategic competitiveness of firms.
Firm Strategy, Structure and Rivalry: The creation and persistence of national competitive advantage requires leading-edge product and process technologies and business strategies.
π Example: Japan's success in consumer electronics can be explained by sophisticated domestic demand (Demand Conditions), skilled workforce (Factor Conditions), a network of component suppliers (Related Industries), and intense competition among Sony, Panasonic, and Toshiba (Firm Strategy/Rivalry).
Points and Limitations of the Porter Diamond
The existence of the four favorable conditions often represents a necessary but not a sufficient condition for the development of a particular national industry. Even when abundant, resources are ultimately limited, thus firms must make choices regarding their pursuit of existing opportunities. Further, given the ability of firms to gain market information and production inputs from abroad, the absence of any of the four conditions within a country may be overcome by their existence internationally.
π‘ Why this matters: Governments can use the Porter Diamond to identify gaps in their national competitive environment and implement policies to strengthen weak determinants.
β Key Takeaways
The factor-proportions theory explains that countries export products using their abundant factors of production, with land-labor and labor-capital relationships determining specialization patterns. The product life cycle theory shows how production locations shift from innovating countries to developing countries as products mature through introduction, growth, maturity, and decline stages. Country similarity theory explains why most trade occurs between similar industrialized countries based on economic, geographic, cultural, and political similarities. The degree of dependence framework helps understand trade relationships along a continuum from independence through interdependence to dependence. Finally, the Porter Diamond identifies four determinants (demand conditions, factor conditions, related and supporting industries, and firm strategy/structure/rivalry) that collectively determine national competitive advantage, though favorable conditions are necessary but not always sufficient for industry success.
π§ Quick Revision Questions
- According to the Heckscher-Ohlin factor-proportions theory, what determines what a country will export?
- What are the four stages of the international product life cycle, and where does production occur in each stage?
- According to country similarity theory, why do firms initially expand to markets similar to their home market?
- What is the difference between independence, interdependence, and dependence in international trade relationships?
- What are the four determinants of national competitive advantage in the Porter Diamond model?
π Lecture 24 β INTERNATIONAL TRADE THEORY
π Overview: This lecture examines the reasons why governments intervene in international trade, from protecting jobs to national security concerns. It then presents the revised case for free trade and traces the historical development of the world trading system from GATT to the WTO. Finally, it discusses the practical implications of trade policy for international businesses.
ποΈ Topics Covered
The lecture begins by exploring nine distinct reasons for government intervention in trade, including job protection, national security, and infant industry arguments. It then presents the revised case for free trade, highlighting problems of retaliation and politics. The historical development of the world trading system is traced from the Smoot-Hawley tariff through GATTβs multiple negotiation rounds to the establishment of the WTO. Finally, implications for business strategy are discussed, focusing on how trade barriers affect firm location decisions and the incentive to lobby for free trade.
π Lecture Summary
The Case for Government Intervention:
The lecture presents nine distinct reasons why governments intervene in international trade, each with its own rationale and limitations.
The most common political reason for trade restrictions is "protecting jobs and industries." This usually results from political pressures by unions or industries that are "threatened" by more efficient foreign producers, and have more political clout than the consumers that will eventually pay the costs.
π Definition β Protecting jobs and industries: Trade restrictions imposed due to political pressure from domestic unions or industries threatened by foreign competition, where producers have more political influence than consumers.
Keeping industries "vital for national security" viable is an oft used argument for trade restrictions. While this is reasonable for industries like steel, aerospace, and electronics, in the US the shoe industry has regularly lobbied that soldiers need boots, and thus the US needs to have a viable shoe industry in order to be able to provide shoes during a time of war.
Government intervention in trade can be used as part of a "get tough" policy to open foreign markets. By taking, or threatening to take, specific actions, other countries may remove trade barriers. But when threatened governments don't back down, tensions can escalate and new trade barriers may be enacted.
Consumer protection can also be an argument for restricting imports. The opening case suggests that the EUβs concern over bananas was, in part, due to an interest in protecting consumers. Since different countries do have different health and safety standards, what may be acceptable in one country may be unacceptable in others.
π Definition β Consumer protection argument: Trade restrictions justified by differences in health and safety standards between countries, where imports acceptable in one nation may be considered unsafe in another.
Concern over human rights in other countries plays an important role in foreign policy. Governments sometimes use trade policy to improve the human rights policies of trading partners. In recent years the USA has had trade restrictions against Libya, Iran, Iraq, North Korea, Cuba, and other countries whose governments were pursuing policies that were not viewed favorably by the US government. Unless a large number of countries choose to take such action, however, it is unlikely to prove successful.
The "infant industry" argument suggests that an industry should be protected until it can develop and be viable and competitive internationally. Unless an industry is allowed to develop and achieve minimal economies of scale, foreign competitors may undercut prices and prevent a domestic industry from developing. The infant industry argument has been accepted as a justification for temporary trade restrictions under the WTO.
π Definition β Infant industry argument: The justification that temporary trade protection should be granted to new domestic industries until they achieve sufficient scale and competitiveness to survive international competition.
A problem with the infant industry argument is determining when an industry "grows up." Some industries that are just plain inefficient and uncompetitive have argued they are still infants after 50 years. The other problem is that given the existence of global capital markets, if the country has the potential to develop a viable competitive position, its firms should be capable of raising the necessary funds without additional support from the government.
Strategic trade policy suggests that in cases where there may be important first mover advantages, governments can help firms from their countries attain these advantages. Strategic trade policy also suggests that governments can help firms overcome barriers to entry into industries where foreign firms have an initial advantage.
π Definition β Strategic trade policy: Government intervention that helps domestic firms gain first-mover advantages or overcome entry barriers in industries where foreign firms have an initial advantage.
The Revised Case for Free Trade:
While strategic trade policy identifies conditions where restrictions on trade may provide economic benefits, there are two problems that may make restrictions inappropriate: retaliation and politics.
Intervening to aid domestic firms will only be successful if other countries do not take similar actions that offset the effects. While it could be very difficult to identify situations where strategic intervention in trade is economically appropriate, various interest groups will be certain to lobby that particular firms should be aided. Given the ease with which special interest groups seem to be able to capture the attention of the government, it is more likely that consumers will be harmed more needlessly than producers. It is unreasonable to expect the government to be completely fair and objective in "targeting" industries, when different industries, lobbies, and politicians all have their own objectives for "getting their paws in the honey pot" of governmental funds.
The Development of the World Trading System:
Up until the Great Depression of the 1930s, most countries had some degree of protectionism. Great Britain, as a major trading nation, was one of the strongest supporters of free trade.
Although the world was already in a depression, in 1930 the US enacted the Smoot-Hawley tariff, which created significant import tariffs on foreign goods. As other nations took similar steps and the depression deepened, world trade fell further.
After WWII, the US and other nations realized the value of freer trade, and established the General Agreement on Tariffs and Trade (GATT). The approach of GATT was to gradually eliminate barriers to trade. Over 100 countries became members of GATT, and worked together to further liberalize trade. Figure 5.1 shows the different rounds of GATT negotiations and the resulting reductions in tariffs.
During the 1980s and early 1990s the world trading system as "managed" by GATT underwent strains. First, Japanβs economic strength and huge trade surplus stressed what had been more equal trading patterns, and Japanβs perceived protectionist (neo-mercantilist) policies created intense political pressures in other countries. Second, the persistent trade deficits by the US, the worldβs largest economy, caused significant economic problems for some industries and political problems for the government. Thirdly, many countries found that although limited by GATT from utilizing tariffs, there were many other more subtle forms of intervention that had the same effects and did not technically violate GATT (e.g., VERs).
Against the background of rising protectionist pressures, in 1986 GATT members embarked on their eighth round of negotiations to reduce tariffs (called the Uruguay Round). This was the most ambitious round to date, as the goal was to expand beyond the regulation of manufactured goods and address trade issues related to intellectual property, agriculture, services, and enforcement mechanism.
The agreement, however, left several important matters unaddressed: financial services, broadcast entertainment, environmental matters, workerβs rights, and foreign direct investment. Those items were left to further negotiations under the auspices of the World Trade Organization.
When the WTO was established, its creators hoped the WTOβs enforcement mechanisms would make it a more effective policeman of the global trade rules than the GATT had been. The WTO has handed down a number of rulings that have led to changes in governmental policies that restricted trade; in other cases governments had made changes in advance of WTO rulings.
Under the WTO, 68 countries that account for more than 90% of world telecommunications revenues pledged to open their markets to foreign competition and to abide by common rules for fair competition in telecommunications. The WTO has also made headway in liberalizing trade in financial services, although the current agreement still includes a number of exceptions. Substantial work still remains to be done on the international trade front, particularly regarding environmental policies and regulations regarding foreign direct investment.
Implications for Business:
Clearly, trade barriers negatively impact the ability of firms to locate activities in the economically optimal location or source materials from the best producers. Trade barriers can change the underlying costs and benefits of different locations, and force firms to undertake operations in specific locations rather than import or export.
Even if specific quotas, tariffs, local content, etc. regulations do not specifically require that certain actions be taken, a firm may choose to locate facilities or buy from certain suppliers in order to reduce the threat of mandatory and more punitive governmental intervention. Certain trade barriers may even make some operations no longer viable, and force a firm to give up particular markets or production sites.
In general international firms have an incentive to lobby for free trade, and keep protectionist pressures from causing them to have to change strategies. While there may be short-term benefits to having governmental protection in some situations, in the long run these can backfire and other governments can retaliate.
β Key Takeaways
The lecture establishes that while there are multiple political and economic justifications for government intervention in trade β including job protection, national security, consumer protection, and infant industry support β such interventions carry significant risks including retaliation and political capture by special interests. The infant industry argument, while accepted by the WTO, is problematic because industries may never "grow up" and global capital markets should fund viable firms anyway. The historical development of the world trading system shows that protectionist policies like the Smoot-Hawley tariff worsened the Great Depression, while GATT and later the WTO have progressively reduced barriers through negotiation rounds, with the Uruguay Round being the most ambitious. For businesses, trade barriers force suboptimal location decisions and create incentives to lobby for free trade, as protection may trigger retaliation that harms long-term interests.
π§ Quick Revision Questions
- What is the infant industry argument for trade protection, and what are its two main problems?
- How did the Smoot-Hawley tariff of 1930 contribute to the Great Depression?
- What three major strains did the GATT system face during the 1980s and early 1990s?
- What key matters were left unaddressed by the Uruguay Round agreement and delegated to the WTO?
- According to the revised case for free trade, what are the two main problems that make trade restrictions inappropriate even when strategic trade policy identifies potential benefits?
π Lecture 25 β The Political Economy of International Trade
π Overview: This lecture examines how political systems and government intervention shape international trade. It covers political risks, government intervention rationales, and various trade control instruments. Understanding these factors is crucial for international business managers to navigate complex global markets and develop effective strategies.
ποΈ Topics Covered
The lecture covers the political environment's impact on international business, including political risk types and government intervention paradigms. It then explores non-economic rationales for government intervention like maintaining essential industries and preserving cultures. Finally, it details instruments of trade control including tariffs, nontariff barriers (direct price influences and quantity controls), and restrictions on services.
π Lecture Summary
THE POLITICAL ENVIRONMENT:
The political environment can dramatically impact firm operations. While U.S. managers may be accustomed to stable political systems and homogeneous populations, this is often not true elsewhere. A political system integrates society into a viable, functioning unit, influencing how business is conducted both domestically and internationally.
THE IMPACT OF THE POLITICAL SYSTEM ON MANAGEMENT DECISIONS:
Political Risk:
Political risk occurs when there is a possibility that the political climate in a foreign country will change in such a way that the operations of international companies in that country will deteriorate.
π Definition β Political risk: The possibility that the political climate in a foreign country will change, causing deterioration in operations of international companies in that country.
Types and causes of political risk include government takeovers of property, operating restrictions, and agitation damaging company performance. These problems can be caused by changing opinions of political leadership, civil disorder, and changes in external relations.
π Definition β Micro political risk: Political actions aimed only at specific foreign investments (e.g., a single foreign company). π Definition β Macro political risk: Political actions aimed at a broad spectrum of foreign investors (e.g., when all foreign-owned private property was taken over by Cuba).
π Example: If a government targets only one foreign mining company for new regulations, that is a micro political risk. If a government nationalizes all foreign-owned assets, that is a macro political risk.
Government Intervention in the Economy:
Some governments adopt an "individualistic paradigm" and keep intervention in the economy at a minimum. Others adopt a "communitarian paradigm" where the government plays a larger role in the economy, thriving on a respected centralized bureaucracy with stable political power.
π‘ Why this matters: When a U.S. firm moves from the United States (individualistic) to Germany, Japan, or South Korea (communitarian), it may have to develop new strategies for relationships with government, suppliers, customers, and competitors.
NONECONOMIC RATIONALES FOR GOVERNMENT INTERVENTION
Maintaining Essential Industries:
Certain industries are deemed essential to a country's functioning (e.g., defense industry). Governments often subsidize and protect domestic manufacturers in these industries. Governments are hesitant to depend on foreign firms for such products, lest they be cut off during war or political disagreements.
Dealing with "Unfriendly" Countries:
Security concerns often lead to defense arguments preventing exports, even to friendly countries, of strategic goods that might fall into the hands of potential enemies.
Maintaining Spheres of Influence:
Governments often give aid and credits to, and encourage imports from, countries that join a political alliance or vote a certain way with international bodies.
Preserving Cultures and National Identity:
Countries limit foreign products and services in certain sectors to protect national identity.
π Example: Canada limits foreign publishing, cable TV, and book selling to protect its cultural identity.
INSTRUMENTS OF TRADE CONTROL:
Tariffs:
A tariff (or duty) is the most common trade controlβa tax governments levy on goods shipped internationally.
π Definition β Tariff: A tax levied by a government on goods shipped internationally.
Types of tariffs by collection point:
- Export tariff: Collected by the exporting country
- Transit tariff: Collected by a country through which the good passes
- Import tariff: Collected by the importing country (most common)
Import tariffs raise the price of imported goods so domestically produced goods gain a relative price advantage.
Types by assessment method:
- Specific duty: Assessed on a per-unit basis
- Ad valorem duty: Assessed as a percentage of the item's value
- Compound duty: Combination of specific and ad valorem duty on the same product
π Example: If a government charges $5 per bicycle imported, that's a specific duty. If it charges 10% of the bicycle's value, that's an ad valorem duty. If it charges both, that's a compound duty.
Nontariff Barriers: Direct Price Influences:
Subsidies: Economic benefits provided by the government to exporters, giving them an unfair advantage in foreign markets. However, there is little agreement on what constitutes a subsidy.
π Example: Did Canada subsidize fish exports when it gave fishermen grants to buy trawlers? Did the United Kingdom subsidize steel when the government-owned steel company had severe losses?
Aid and loans: Governments give aid and loans to other countries requiring that funds be spent in the donor country (tied loans or tied aid). These loans make it possible for certain products to compete abroad that would otherwise be noncompetitive.
Customs valuation: Sometimes difficult to determine the true value of an import for ad valorem tariff assessment.
π Example: 2,000 bicycles imported to Argentina with an invoice price of $1.78 eachβcustoms officers assess the value, affecting the price.
Other direct price influences: Special fees, customs deposits, and minimum price levels.
Nontariff Barriers: Quantity Controls:
Quotas: The most common type of import or export restriction based on quantity. A quota limits the quantity of a product allowed to be imported in a given year. An embargo is a quota of zero that prohibits all trade.
π Definition β Quota: A limit on the quantity of a product allowed to be imported in a given year. π Definition β Embargo: A specific type of quota that prohibits all trade (essentially a quota of zero).
"Buy local" legislation: Includes local content laws prescribing a minimum percentage of domestic value for a product to be legally sold. Also occurs when governments give preferential treatment to domestic producers in acquisitions.
Standards: Classification, labeling, and testing standards set in ways that allow domestic products but inhibit foreign-made ones.
π Example: U.S. genetically enhanced corn is not permitted in Europe even though there is no evidence of human health risk.
Specific permission requirements: Some countries require importers or exporters to secure permission from government authorities before conducting trade transactions. The time, effort, and expense of securing an import license or foreign exchange constitute significant obstacles.
Administrative delays: The way imports are handled can be an obstacle.
π Example: South Korean customs routinely takes 30 days or more to clear imported merchandise, adding to inventory costs and making some perishables unsaleable.
Reciprocal requirements: Governments require exporters to take merchandise in lieu of money. These barter transactions are called countertrade or offsets, making trade deals more difficult.
Restrictions on Services:
Services account for nearly 20% of all international trade value. Countries restrict services trade for three main reasons:
- Essentiality: Certain service industries serve strategic purposes or provide social assistance (e.g., communications, banking, utilities where foreign firms are often excluded)
- Standards: Governments limit foreign entry by setting licensing standards difficult for foreign citizens to meet (applied to engineers, architects, lawyers, physicians, teachers)
- Immigration: Clearing standards does not guarantee work permits. Governments usually require firms to demonstrate skills are unavailable locally before granting work permits for foreigners.
β Key Takeaways
Political risk exists at both micro and macro levels and can significantly impact international operations through government takeovers, operating restrictions, or civil disorder. Governments intervene in trade for non-economic reasons including maintaining essential industries, dealing with unfriendly countries, preserving spheres of influence, and protecting cultural identity. Trade control instruments include tariffs (specific, ad valorem, compound) and nontariff barriers such as subsidies, quotas, standards, administrative delays, and countertrade requirements. Services trade faces unique restrictions based on essentiality, professional standards, and immigration controls. Understanding the difference between individualistic and communitarian paradigms is critical for adapting business strategies across different political environments.
π§ Quick Revision Questions
- What is the difference between micro political risk and macro political risk? Provide an example of each.
- Name and explain the four non-economic rationales for government intervention in trade.
- What are the three types of tariffs based on collection point, and how do specific duties differ from ad valorem duties?
- List five different types of nontariff barriers that affect quantity controls in international trade.
- What three main reasons do countries use to restrict trade in services?
π Lecture 26 β The Political Economy of International Trade
π Overview: This lecture examines the various instruments governments use to intervene in international trade, including voluntary export restraints, local content requirements, anti-dumping laws, and administrative actions. It also explores the political and economic arguments for government intervention in trade, from protecting jobs and national security to strategic trade policy and human rights concerns.
ποΈ Topics Covered
The lecture covers four main trade policy instruments: voluntary export restraints (VERs), local content requirements, anti-dumping laws, and administrative actions. It then examines nine arguments for government intervention in trade: protecting jobs and industries, national security, opening foreign markets, consumer protection, human rights, the infant industry argument, and strategic trade policy including first-mover advantages and overcoming barriers to entry.
π Lecture Summary
THE POLITICAL ECONOMY OF INTERNATIONAL TRADE
VER (Voluntary Export Restraint)
A voluntary export restraint (VER) may have the same effect as a quota. In a VER, another country or countries agree to not export more than a certain quantity to another country or countries. VERs are usually only enacted when it is feared that a more restrictive tariff or quota will be levied unless exports are "voluntarily" reduced. In other words, the threat of retaliation encourages compliance.
Import quotas and VERs benefit domestic producers and harm domestic consumers. They can also even help foreign producers, as foreign producers can raise the price they charge for the limited supply they can sell, and take the difference as additional profit.
π Definition β Voluntary Export Restraint (VER): A trade restriction where exporting countries voluntarily limit the quantity of goods they ship to another country, typically to avoid the imposition of more restrictive trade barriers. π Example: A country fearing a tariff on steel might agree to limit steel exports to the importing country, and foreign producers can then raise prices on the reduced supply, earning additional profit.
π‘ Why this matters: VERs appear cooperative but create the same economic distortions as quotas β domestic consumers pay higher prices, while both domestic and foreign producers benefit at their expense.
LOCAL CONTENT REQUIREMENT
Local content requirements specify that firms must produce some portion of a good domestically. The purpose of a local content requirement is usually to aid the formation of domestic industries, to keep manufacturers from switching to foreign suppliers, or to keep foreign firms from setting up "screwdriver plants," where imported manufactured components undergo simple assembly in order to avoid some other trade restriction on the importation of the fully assembled product. Domestic suppliers benefit, and domestic consumers must bear the costs.
π Definition β Local Content Requirement: A regulation requiring that a certain percentage of a product's value or components be produced domestically. π Definition β Screwdriver Plant: A facility where imported components undergo minimal assembly to circumvent trade restrictions on fully assembled goods. π‘ Why this matters: Local content requirements protect domestic industries but raise costs for consumers and can encourage inefficient production by forcing firms to use local suppliers regardless of quality or price.
ANTI-DUMPING LAWS
Dumping occurs when a country sells goods in another country below cost or below fair market value. Dumping is a way firms can unload excess production into foreign markets. When plants must operate at a certain level regardless of domestic demand, the producer may find it appropriate to export some portion of the factory's output abroad. At times dumping may also be done for predatory reasons, hoping to drive other producers out of the market, and subsidizing foreign sales with higher domestic prices. Antidumping policies are designed to prevent dumping from occurring, or by instituting import taxes in order to bring prices of "dumped" goods back up to fair levels.
π Definition β Dumping: Selling goods in a foreign market below cost or below fair market value. π Definition β Antidumping Policies: Trade measures, including import taxes, designed to prevent dumping or raise prices of dumped goods to fair levels. π Example: A factory operating at full capacity to achieve efficiency may export excess production at prices below domestic market prices. If this harms domestic producers in the importing country, antidumping duties may be imposed to raise the price back to "fair" levels.
ADMINISTRATIVE ACTIONS
A wide range of administrative barriers can be enacted. These include taking so much time to inspect goods that they spoil or setting down specific regulations on "product standards" that are very expensive to meet.
The Case for Government Intervention:
-
Protecting jobs and industries β The most common political reason for trade restrictions is "protecting jobs and industries." Usually this results from political pressures by unions or industries that are "threatened" by more efficient foreign producers, and have more political clout than the consumers that will eventually pay the costs.
-
National security β Keeping industries "vital for national security" viable is an oft used argument for trade restrictions. While this is reasonable for industries like steel, aerospace, and electronics, in the US the shoe industry has regularly lobbied that soldiers need boots, and thus the US needs to have a viable shoe industry in order to be able to provide shoes during a time of war.
-
Opening foreign markets β Government intervention in trade can be used as part of a "get tough" policy to open foreign markets. By taking, or threatening to take, specific actions, other countries may remove trade barriers. But when threatened governments don't back down, tensions can escalate and new trade barriers may be enacted.
-
Consumer protection β Consumer protection can also be an argument for restricting imports. The opening case suggests that the EU's concern over bananas was, in part, due to an interest in protecting consumers. Since different countries do have different health and safety standards, what may be acceptable in one country may be unacceptable in others.
-
Human rights β Concern over human rights in other countries plays an important role in foreign policy. Governments sometimes use trade policy to improve the human rights policies of trading partners. Governments also use trade policies to put pressure on governments to make other changes. In recent years the USA has had trade restrictions against Libya, Iran, Iraq, North Korea, Cuba, and other countries whose governments were pursuing policies that were not viewed favorably by the US government. Unless a large number of countries choose to take such action, however, it is unlikely to prove successful.
-
Infant industry argument β The "infant industry" argument suggests that an industry should be protected until it can develop and be viable and competitive internationally. Unless an industry is allowed to develop and achieve minimal economies of scale, foreign competitors may undercut prices and prevent a domestic industry from developing. The infant industry argument has been accepted as a justification for temporary trade restrictions under the WTO.
-
Problems with infant industry argument β A problem with the infant industry argument is determining when an industry "grows up." Some industries that are just plain inefficient and uncompetitive have argued they are still infants after 50 years. The other problem is that given the existence of global capital markets, if the country has the potential to develop a viable competitive position, its firms should be capable of raising the necessary funds without additional support from the government.
-
Strategic trade policy β first-mover advantages β Strategic trade policy suggests that in cases where there may be important first mover advantages, governments can help firms from their countries attain these advantages.
-
Strategic trade policy β overcoming barriers to entry β Strategic trade policy also suggests that governments can help firms overcome barriers to entry into industries where foreign firms have an initial advantage.
π Definition β Infant Industry Argument: The justification for temporary trade protection of a new domestic industry until it can achieve economies of scale and become internationally competitive. π Definition β Strategic Trade Policy: Government intervention in trade to help domestic firms gain first-mover advantages or overcome barriers to entry in industries where foreign firms have an initial advantage.
β Key Takeaways
The lecture identifies four major trade policy instruments β VERs, local content requirements, anti-dumping laws, and administrative actions β each of which can protect domestic industries but typically harms consumers through higher prices. The most critical point is that while arguments for intervention range from legitimate concerns like national security and infant industry protection to political pressures from special interests, many interventions have hidden costs. The infant industry argument is theoretically sound but practically problematic because protected industries rarely "grow up" and capital markets should fund viable ventures. Strategic trade policy offers a rationale for government support in industries with first-mover advantages, but trade restrictions can escalate tensions and trigger retaliation rather than achieve their intended goals.
π§ Quick Revision Questions
- How does a voluntary export restraint (VER) differ from a standard import quota, and who benefits from each?
- What is a "screwdriver plant," and how do local content requirements aim to prevent them?
- What are the two possible motivations for dumping β unloading excess production versus predatory pricing?
- What are the two main problems with the infant industry argument as a justification for trade protection?
- According to strategic trade policy, what two specific advantages can government intervention help domestic firms achieve?