๐ Lecture 17 โ NATURE AND TYPES OF MANAGERIAL DECISIONS
๐ Overview: This lecture explains the fundamental nature of managerial decision-making, distinguishing between programmed and non-programmed decisions. It covers how different types of problemsโwell-structured and poorly structuredโrequire different decision approaches, and explores the assumptions of rational decision-making versus actual decision-making styles managers use.
๐๏ธ Topics Covered
This lecture covers the nature of managerial decision-making including programmed and non-programmed decisions; types of problems and decisions including well-structured versus poorly structured problems and the plans used for programmed decisions (procedures, rules, policies); general organizational situations relating decision types to management levels; the assumptions of rationality in decision-making and its limitations; and four decision-making styles (directive, analytic, conceptual, behavioral) based on thinking approach and tolerance for ambiguity.
๐ Lecture Summary
Nature of Managerial Decision-making:
Decision making is the act of choosing one alternative from among a set of alternatives. There are two types of decisions. Programmed decisions are those made in routine, repetitive, well-structured situations through the use of predetermined decision rules. Many programmed decisions are derived from established practices and procedures or habit. Computers are an ideal tool for dealing with several kinds of complex programmed decisions. Most of the decisions made by first-line managers and many by middle managers are programmed decisions. Non-programmed decisions are those for which predetermined decision rules are impractical because the situations are novel and/or ill-structured.
๐ Definition โ Decision making: the act of choosing one alternative from among a set of alternatives. ๐ Definition โ Programmed decisions: decisions made in routine, repetitive, well-structured situations through predetermined decision rules. ๐ Definition โ Non-programmed decisions: decisions for which predetermined decision rules are impractical because situations are novel and/or ill-structured.
Types of Problems and Decisions:
Managers will be faced with different types of problems and will use different types of decisions. Another dimension of problem is its structure. A problem can be well-structured or poorly structured.
-
Well-structured problems are straightforward, familiar, and easily defined. In handling this situation, a manager can use a programmed decision, which is a repetitive decision that can be handled by a routine approach. There are three types of plans for programmed decisions. a) A procedure is a series of interrelated sequential steps that can be used to respond to a structured problem. b) A rule is an explicit statement that tells managers what they ought or ought not to do. c) A policy is a guide that establishes parameters for making decisions rather than specifically stating what should or should not be done.
-
Poorly structured problems are new or unusual problems in which information is ambiguous or incomplete. These problems are best handled by a non-programmed decision that is a unique decision that requires a custom-made solution.
๐ Definition โ Well-structured problems: straightforward, familiar, and easily defined problems. ๐ Definition โ Poorly structured problems: new or unusual problems in which information is ambiguous or incomplete. ๐ Definition โ Procedure: a series of interrelated sequential steps used to respond to a structured problem. ๐ Definition โ Rule: an explicit statement that tells managers what they ought or ought not to do. ๐ Definition โ Policy: a guide that establishes parameters for making decisions rather than specifically stating what should or should not be done.
General Organizational Situations:
- At the higher levels of the organization, managers are dealing with poorly structured problems and using non-programmed decisions.
- At lower levels, managers are dealing with well-structured problems by using programmed decisions. Since managers can make decisions on the basis of rationality, bounded rationality, or intuition, let us try to understand them one by one:
Assumptions of Rationality
Managerial decision making is assumed to be rational; that is, choices that are consistent and value maximizing within specified constraints. The assumptions of rationality are summarized below. a) These assumptions are problem clarity (the problem is clear and unambiguous); goal orientation (a single, well-defined goal is to be achieved); known options (all alternatives and consequences are known); clear preferences; constant preferences (preferences are constant and stable); no time or cost constraints; and maximum pay off. b) The assumption of rationality is that decisions are made in the best economic interests of the organization, not in the managerโs interests.
The assumptions of rationality can be met if: the manager is faced with a simple problem in which goals are clear and alternatives limited, in which time pressures are minimal and the cost of finding and evaluating alternatives is low, for which the organizational culture supports innovation and risk taking, and in which outcomes are concrete and measurable.
The rational model is flawed in that it does not apply to actual decision aiming for two reasons. a. Perfect information is not available. b. Managerโs values and personality factors enter into their decisions.
The rational model presents an ideal against which actual decision-making patterns can be measured.
๐ Definition โ Rational decision making: choices that are consistent and value maximizing within specified constraints. ๐ก Why this matters: The rational model serves as an ideal benchmark, but real-world decisions are constrained by imperfect information and human factors.
Decision-Making Styles
Managers have different styles when it comes to making decisions and solving problems. One perspective proposes that people differ along two dimensions in the way they approach decision making. One dimension is an individualโs way of thinkingโrational or intuitive. The other is the individualโs tolerance for ambiguityโlow or high.
These two dimensions lead to a two by two matrix with four different decision-making styles. a) The directive style is one thatโs characterized by low tolerance for ambiguity and a rational way of thinking. b) The analytic style is one characterized by a high tolerance for ambiguity and a rational way of thinking. c) The conceptual style is characterized by an intuitive way of thinking and a high tolerance for ambiguity. d) The behavioral style is one characterized by a low tolerance for ambiguity and an intuitive way of thinking.
Most managers realistically probably have a dominant style and alternate styles, with some relying almost exclusively on their dominant style and others being more flexible depending on the situation.
๐ Definition โ Directive style: decision-making style characterized by low tolerance for ambiguity and a rational way of thinking. ๐ Definition โ Analytic style: decision-making style characterized by high tolerance for ambiguity and a rational way of thinking. ๐ Definition โ Conceptual style: decision-making style characterized by an intuitive way of thinking and a high tolerance for ambiguity. ๐ Definition โ Behavioral style: decision-making style characterized by low tolerance for ambiguity and an intuitive way of thinking.
โญ Key Takeaways
Managers must distinguish between programmed decisions for routine, well-structured problemsโusing procedures, rules, and policiesโand non-programmed decisions for novel, poorly structured problems that require custom solutions. Higher-level managers typically face non-programmed decisions while lower-level managers handle programmed decisions. While the rational model assumes perfect information and value-maximizing choices, real-world decisions are limited by imperfect information and personal values. Decision-making styles vary along two dimensionsโrational vs. intuitive thinking and high vs. low tolerance for ambiguityโproducing four distinct styles: directive, analytic, conceptual, and behavioral.
๐ง Quick Revision Questions
- What is the difference between programmed and non-programmed decisions?
- What are the three types of plans used for programmed decisions, and how do they differ?
- Why does the rational model of decision-making not fully apply to actual managerial decisions?
- What are the two dimensions that define a manager's decision-making style?
- Describe the four decision-making styles and their key characteristics.
๐ Lecture 18 โ Non-Rational Decision Making
๐ Overview: This lecture examines why managers often cannot or do not make perfectly rational decisions. It introduces three non-rational models of decision makingโsatisficing, incremental, and garbage-canโand explores the dynamics, advantages, disadvantages, and improvement tactics for group decision making in organizations.
๐๏ธ Topics Covered
The lecture covers three non-rational decision-making models: the Satisficing Model (including bounded rationality and its limitations), the Incremental Model, and the Garbage-Can Model. It then addresses Group Decision Making, detailing its advantages, disadvantages, common pitfalls like groupthink, and strategies to enhance group effectiveness, including devilโs advocates, dialectical inquiry, and computer-based support tools.
๐ Lecture Summary
Non-Rational Model: NON RATIONAL DECISION MAKING
The non-rational models of managerial decision making suggest that information-gathering and processing limitations make it difficult for managers to make optimal decisions.
-
The Satisficing Model, developed in the 1950s by Nobel Prize winner economist Herbert Simon, holds that managers seek alternatives only until they find one that looks satisfactory, rather than seeking the optimal decision.
- Bounded rationality means that the ability of managers to be perfectly rational in making decisions is limited by such factors as cognitive capacity and time constraints.
- Actual decision making is not perfectly rational because of:
- Inadequate information
- Time and cost factors
- The decision makerโs own misperceptions or prejudices
- Limited human memory
- Limited human data-processing abilities.
- Satisficing can be appropriate when the cost of delaying a decision or searching for a better alternative outweighs the likely payoff from such a course.
-
The Incremental Model holds that managers make the smallest response possible that will reduce the problem to at least a tolerable level.
- Managers can make decisions without processing a great deal of information.
- Incremental strategies are usually more effective in the short run than in the long run.
-
The Garbage-Can Model of decision making holds that managers behave in virtually a random pattern in making non-programmed decisions.
- Factors that determine decisions include the particular individuals involved in the decisions, their interests and favorite solutions to problems, as well as any opportunities they stumble upon.
- The garbage-can approach is often used in the absence of solid strategic management and can lead to severe problems.
๐ Definition โ Bounded Rationality: The ability of managers to be perfectly rational in making decisions is limited by cognitive capacity, time constraints, and other human factors.
๐ Example: A manager selecting a new supplier may stop searching as soon as they find one offering acceptable quality and price, rather than investigating every possible supplierโthis is satisficing due to bounded rationality.
Group Decision making
Decisions on all levels of organization are frequently made by groups. Group decision making has several advantages and disadvantages over individual decision making.
-
Some advantages of group decision making include:
- Groups bring more diverse information and knowledge to bear on the question under consideration.
- An increased number of alternatives can be developed.
- Greater understanding and acceptance of the final decision are likely.
- Members develop knowledge and skill for future use.
-
Group decision making has several disadvantages:
- Group decision making is more time consuming.
- Disagreements may delay decisions and cause hard feelings.
- The discussion may be dominated by one or a few group members.
- Groupthink is the tendency in cohesive groups to seek agreement about an issue at the expense of realistically appraising the situation.
Managers can enhance group decision-making processes by taking steps to avoid the pitfalls of group decision making:
- Individuals should be involved only if they have information and knowledge relevant to the decision.
- The composition of the group should reflect the diversity of the broader workgroup. Heterogeneous groups have been found to be more effective over time than groups with the same nationality and ethnic backgrounds.
- Two tactics are available to avoid groupthink:
- Devilโs advocates are individuals who are assigned the role of making sure that the negative aspects of any attractive decision alternatives are considered.
- Dialectical inquiry is a procedure in which a decision situation is approached from two opposite points of view.
Several groupware software packages are now available to enable managers to make use of recent advances in information technology that enables groups to utilize computers in their decision making.
- Teleconferencing enables groups to โmeetโ electronicallyโeither by conference phone hookups or through computer networks.
- Group decision support systems are new specialized computer-based information systems which support groups working on less well defined problems.
- Computer aids to group decision making seem to increase creativity. However, face-to-face meetings still tend to show stronger consensus and satisfaction among members of the group.
๐ Definition โ Groupthink: The tendency in cohesive groups to seek agreement about an issue at the expense of realistically appraising the situation.
๐ก Why this matters: Groupthink can lead to poor decisions because critical evaluation is suppressed in favor of harmony.
โญ Key Takeaways
The core distinction in this lecture is between rational and non-rational decision making. Managers rarely achieve perfect rationality due to bounded rationalityโlimitations in information, time, memory, and cognitive capacity. The satisficing model explains why managers often choose a "good enough" option rather than the best one. Group decision making brings more knowledge and acceptance but suffers from time delays, conflicts, and groupthink. To counter groupthink, managers should use devilโs advocates and dialectical inquiry. While computer tools like teleconferencing and group decision support systems can boost creativity, face-to-face meetings still yield stronger consensus and satisfaction.
๐ง Quick Revision Questions
- What is bounded rationality, and what five factors cause actual decision making to be less than perfectly rational?
- Under what conditions is satisficing an appropriate decision-making strategy?
- Compare the incremental model and the garbage-can model of decision making.
- List three advantages and three disadvantages of group decision making over individual decision making.
- Explain two specific tactics managers can use to avoid groupthink in group decision making.
๐ Lecture 19 โ Group Decision Making and Creativity
๐ Overview: This lecture explores the critical role of creativity and innovation in organizational decision-making. It distinguishes between creativity and innovation, outlines the creative process, and presents various group decision-making techniques like brainstorming, the Nominal Group Technique, the Delphi method, and scenario analysis, along with Deming's PDCA cycle for continuous improvement.
๐๏ธ Topics Covered
The lecture begins by defining and differentiating creativity from innovation, exploring convergent and divergent thinking, and detailing the three necessary ingredients of creativity. It then outlines the individual creative process stages (preparation, incubation, illumination, verification) and techniques to enhance group creativity, including brainstorming and the Nominal Group Technique. The discussion continues with lateral versus vertical thinking, introduces other decision-making methods like the Delphi method and scenario analysis, and concludes with Deming's PDCA/PDSA tool for improvement and innovation.
๐ Lecture Summary
The Creativity Factor in Decision Making
Innovation and creativity are crucial for organizational success in the marketplace. There is a clear difference between creativity and innovation.
- Creativity is the ability to combine ideas in a unique way or to make unusual associations between ideas.
- Innovation is the process of taking a creative idea and turning it into a useful product, service, or method of operation.
Creativity is the cognitive process of developing an idea, concept, commodity, or discovery that is viewed as novel by its creator or a target audience. A. Creativity requires both convergent thinking and divergent thinking.
- Convergent thinking is the effort to solve problems by beginning with a problem and attempting to move logically to a solution.
- Divergent thinking is the effort to solve problems by generating new ways of viewing a problem and seeking novel alternatives.
B. Creativity has three necessary ingredients.
- Domain-relevant skills are those associated with expertise in the relevant field.
- Creativity-relevant skills include a cognitive style, or method of thinking that is oriented to exploring new directions, knowledge of approaches that can be used for generating novel ideas, and a work style that is conducive to developing creative ideas.
- Task motivation is interest in the task for its own sake, rather than because of some external reward possibility.
C. An individualโs creative process has several stages.
- Preparation involves the individualโs immersion in every aspect of a problem through gathering initial information, generating alternatives, and seeking and analyzing further data relating to the problem.
- Incubation involves a rest from consciously focusing on the problem as subconscious mental activities and divergent thinking take over.
- Illumination is often experienced as a breakthrough as a new level of insight is achieved.
- Verification involves testing the ideas to determine the validity of the insight.
D. Group creativity can be enhanced by means of a number of techniques. Two of which are following:
- Brainstorming is a means of enhancing creativity that encourages group members to generate as many novel ideas as possible on a given topic without evaluating them. a. The ground rules used in brainstorming were described earlier in this chapter. b. Computer assisted brainstorming have been found to give superior results.
- The Nominal Group Technique (NGT) is a means of enhancing creativity and decision making that integrates both individual work and group interaction within certain ground rules.
a. NGT was developed to foster creativity and to overcome the tendency to criticize ideas when they are presented.
b. The ground rules of NGT are:
- Individuals independently prepare a list of their ideas on a problem.
- Group members present their ideas one at a time in turn, and ideas are listed for all to see.
- Members discuss the ideas to clarify and evaluate them.
- Individuals vote silently using a rating procedure. c. Recent research suggests that NGT is superior to brainstorming groups in generating ideas but not so when compared to computer-assisted brainstorming.
๐ Definition โ Creativity: The ability to combine ideas in a unique way or to make unusual associations between ideas. ๐ Definition โ Innovation: The process of taking a creative idea and turning it into a useful product, service, or method of operation. ๐ Definition โ Convergent Thinking: The effort to solve problems by beginning with a problem and attempting to move logically to a solution. ๐ Definition โ Divergent Thinking: The effort to solve problems by generating new ways of viewing a problem and seeking novel alternatives. ๐ Definition โ Domain-relevant skills: Skills associated with expertise in the relevant field. ๐ Definition โ Creativity-relevant skills: A cognitive style oriented to exploring new directions, knowledge of approaches for generating novel ideas, and a work style conducive to developing creative ideas. ๐ Definition โ Task motivation: Interest in the task for its own sake, rather than because of some external reward possibility. ๐ Definition โ Brainstorming: A means of enhancing creativity that encourages group members to generate as many novel ideas as possible on a given topic without evaluating them. ๐ Definition โ Nominal Group Technique (NGT): A means of enhancing creativity and decision making that integrates both individual work and group interaction within certain ground rules.
Lateral Thinking Vs Vertical Thinking
Vertical thinking is logical but only in one direction. You ignore the possibilities and alternatives around you or various other ways of doing the same thing. Vertical way of thinking is the problem-solving way the way computers do. Rotating a problem from different angles to try and locate alternative points of entry involves Lateral thinking. This is a creative processing that the human mind can do, but computers are generally unable to do. It is useful when one channel of thought reaches a dead end and another approach is needed. It can be difficult but satisfying to solve and will encourage you to examine lots of different clues and information without any prejudice. Thinking laterally and avoiding the obvious is a great tool in the life of a manager. This thinking asks you to generate 3-4 alternatives to a given problem and then try one option at a time to put into action and see the results for the best.
๐ Definition โ Vertical thinking: Logical thinking that proceeds in one direction, ignoring alternative possibilities. ๐ Definition โ Lateral thinking: Creative thinking that involves rotating a problem from different angles to locate alternative points of entry.
Other Decision Making Methods
-
Delphi Method: The Delphi method is a structured approach to gain the judgments of a number of experts on a specific issue relating to the future. a. A panel of experts is surveyed in the interest of compiling a list of likely scientific breakthroughs and the predicted time of their occurrence. b. The resultant list is resubmitted to the experts who then estimate whether the predicated breakthroughs are likely to occur earlier or later than the average estimated time frame. c. The next set of results is again submitted to the experts.
- If a consensus is reached, dissenters are asked to explain why they disagree with the majority.
- If there is a wide divergence of opinion this step is repeated.
-
Scenario Analysis: The Scenario analysis, developed in France, approach addresses a variety of possible futures by evaluating major environmental variables, assessing the likely strategies of other significant factors (e.g., other organizations), devising possible counter strategies, developing ranked hypotheses about the variables, and formulating alternative scenarios. a. Scenarios are outlines of possible future conditions, including possible paths the organization could take that would likely lead to these conditions. b. One object of the method is to enable the organization to make decisions that do not greatly inhibit further freedom of choice.
๐ Definition โ Delphi method: A structured approach to gain the judgments of a number of experts on a specific issue relating to the future. ๐ Definition โ Scenario Analysis: An approach that addresses a variety of possible futures by evaluating major environmental variables, assessing likely strategies of other factors, and formulating alternative scenarios. ๐ Definition โ Scenarios: Outlines of possible future conditions, including possible paths the organization could take that would likely lead to these conditions.
Demingโs TOOL FOR Improvement and Innovation
PDCA or PDSA i.e. Planning, Doing, Checking/Studying and Acting are the four activities which Dr. Deming taught to Japanese companies to solve work-related daily and yearly problems. When the tool is deployed out in a cyclic fashion will lead to improvement and innovation in every process and work area of the organization. This is one of the well known quality management tool.
๐ Definition โ PDCA/PDSA (Plan-Do-Check-Act / Plan-Do-Study-Act): A four-step cyclic quality management tool for improvement and innovation, involving Planning, Doing, Checking/Studying, and Acting.
๐ก Why this matters: The PDCA cycle is a foundational tool for continuous improvement in quality management, applicable to virtually any process or work area in an organization.
Questions and Answers
-
Differentiate between creativity and innovation. Creativity is the ability to combine ideas in a unique way or to make unusual associations between ideas. Innovation is the process of taking a creative idea and turning it into a useful product, service, or method of operation.
-
How can the systems model be used to help organizations become more innovative? In the systems model we use inputs like creative people and groups and, through a creative process or situation, transform the inputs into the desired output such as creative products. The right environment is also important.
-
Describe the specific structural, cultural, and human resource variables associated with innovation. Variables associated with innovation are structural (organic structure, abundant resources, and high inter-unit communication), cultural (acceptance of ambiguity, tolerance of the impractical, low external controls, tolerance of risks, tolerance of conflicts, focus on ends, and open-system focus), and human resource (high commitment to training and development, high job security, and creative people).
โญ Key Takeaways
Managers must understand the distinction between creativity (generating novel ideas) and innovation (implementing those ideas) and recognize that both are essential for organizational success. The creative process involves preparation, incubation, illumination, and verification, and can be enhanced by group techniques like brainstorming and the Nominal Group Technique (NGT). Decision-making can be further improved by methods such as the Delphi method for expert consensus and scenario analysis for exploring multiple futures. Lateral thinking, which involves viewing problems from different angles, is a critical skill for managers to develop, especially when conventional approaches fail. Finally, Deming's PDCA/PDSA cycle is a powerful tool for driving continuous improvement and innovation in all organizational processes.
๐ง Quick Revision Questions
- What is the difference between creativity and innovation?
- Name the four stages of the individual creative process.
- What are the key ground rules of the Nominal Group Technique (NGT)?
- How does lateral thinking differ from vertical thinking?
- What does PDCA stand for, and what is its primary purpose?
๐ Lecture 20 โ PLANNING AND DECISION AIDS-I
๐ Overview: This lecture introduces the planning tools and techniques managers use to assess the environment and make better decisions. It covers environmental scanning, SWOT analysis, competitor intelligence, forecasting methods (quantitative, qualitative, and judgmental), and benchmarking. Understanding these aids is critical for effective strategic planning and decision-making in organizations.
๐๏ธ Topics Covered
The lecture covers techniques for assessing the environment including environmental scanning, SWOT analysis, and competitor intelligence. It then explains forecasting methods in detail โ quantitative forecasting (time-series and causal models), qualitative/technological forecasting (Delphi method, scenario analysis), and judgmental forecasting (jury of executive opinion, sales-force composite). Finally, it discusses benchmarking as a tool for identifying best practices and improving performance.
๐ Lecture Summary
TECHNIQUES FOR ASSESSING THE ENVIRONMENT
Several techniques help managers evaluate the organization's external and internal environments. Environmental scanning involves screening large amounts of information to anticipate and interpret changes in the environment. Research shows companies with advanced scanning systems increased profits and revenue growth.
SWOT analysis is an analysis of an organization's strengths, weaknesses, opportunities, and threats. It combines internal and external environmental analyses to identify a strategic niche the organization might exploit.
Competitor intelligence is an environmental scanning activity that seeks to identify who competitors are, what they are doing, and how their actions will affect the organization.
Global scanning assesses changes and trends in the global environment.
Environmental scanning provides the foundation for developing forecasts, which are predictions of outcomes. There are three categories of forecasting techniques:
- Quantitative forecasting applies mathematical rules to past data
- Qualitative forecasting uses judgment and opinions of knowledgeable individuals
- Judgmental forecasting relies on individual or group judgments
๐ Definition โ Environmental Scanning: The screening of large amounts of information to anticipate and interpret changes in the environment.
๐ Definition โ SWOT Analysis: An analysis of an organization's strengths, weaknesses, opportunities, and threats to identify a strategic niche the organization might exploit.
๐ Definition โ Competitor Intelligence: An environmental scanning activity that seeks to identify who competitors are, what they are doing, and how their actions will affect the organization.
Forecasting
Forecasting is the process of predicting changing conditions and future events that may significantly affect the business of an organization.
- Forecasting is important to both planning and decision making.
- Forecasting is used in various areas: production planning, budgeting, strategic planning, sales analysis, inventory control, marketing planning, logistics planning, and purchasing.
Forecasting techniques are most accurate when the environment is not rapidly changing.
Suggestions for improving forecasting effectiveness:
- Use simple forecasting techniques.
- Compare every forecast with "no change."
- Don't rely on a single forecasting method.
- Don't assume you can accurately identify turning points in a trend.
- Shorten the length of the forecasts.
- Forecasting is a managerial skill that can be practiced and improved.
๐ Definition โ Forecasting: The process of predicting changing conditions and future events that may significantly affect the business of an organization.
Methods of Forecasting
A. Quantitative Forecasting
Quantitative forecasting relies on numerical data and mathematical models to predict future conditions. Two types are most frequently used:
1. Time-series methods use historical data to develop forecasts of the future.
- The underlying assumption is that patterns exist and the future will resemble the past.
- They do not predict the impact of present or future actions that managers might take.
- A trend reflects a long-range general movement in either an upward or downward direction.
- A seasonal pattern indicates upward or downward changes that coincide with particular points within a given year.
- A cyclical pattern involves changes at particular points in time that span longer than a year.
- Time-series are more valuable for predicting broad environmental factors than for predicting the impact of present or future actions.
- There is danger in their use if environmental changes are disregarded.
2. Explanatory or causal models attempt to identify major variables related to or having caused particular past conditions, then use current measures of those variables (predictors) to predict future conditions.
- Explanatory models allow managers to assess the probable impact of changes in the predictors.
- Regression models are equations that express fluctuations in the variable being forecasted in terms of fluctuations among one or more other variables.
- Econometric models are systems of simultaneous multiple regression equations involving several predictor variables used to identify and measure relationships in the economy.
- Leading indicators are variables that tend to correlate with the phenomenon of major interest but tend to occur in advance of the phenomenon.
๐ Definition โ Trend: A long-range general movement in either an upward or downward direction.
๐ Definition โ Regression Models: Equations that express fluctuations in the variable being forecasted in terms of fluctuations among one or more other variables.
B. Technological, or Qualitative, Forecasting
Technological forecasting is aimed primarily at predicting long-term trends in technology and other important aspects of the environment. The focus is on longer-term issues less amenable to numerical analysis. The Delphi method and Scenario analysis can be used as techniques.
C. Judgmental Forecasting
Judgmental forecasting relies mainly on individual judgments or committee agreements regarding future conditions.
- These methods are highly susceptible to bias.
- The jury of executive opinion is a means of forecasting where organization executives hold a meeting and estimate, as a group, a forecast for a particular item.
- The Sales-force composite is a means of forecasting used mainly to predict future sales, involving obtaining views of various salespeople, sales managers, and/or distributors regarding the sales outlook.
Choice of Forecasting Method
Quantitative forecasting methods:
- Short-to-medium time horizon
- Require short development time if method is developed
- Often have high development costs
- High accuracy in identifying patterns
- Low accuracy in predicting turning points for time series, medium for other methods
- Difficult to understand
Technological forecasting methods:
- Medium-to-long time horizon
- Require medium-to-long time
- Medium development costs
- Medium accuracy in identifying patterns
- Medium accuracy in predicting turning points
- Easily understood
Judgmental forecasting methods:
- Short-to-long time horizon
- Require short time
- Low development costs
- Medium-to-high accuracy in identifying patterns
- Low accuracy in predicting turning points
- Easily understood
Benchmarking
Benchmarking is the search for the best practices among competitors or non-competitors that lead to their superior performance.
The benchmarking process follows four steps: a. A benchmarking planning team is formed to identify what to benchmark, identify comparative organizations, and determine data collection methods. b. The team collects internal and external data. c. The data is analyzed to identify performance gaps and determine the cause of the difference. d. An action plan is prepared and implemented.
๐ Definition โ Benchmarking: The search for the best practices among competitors or non-competitors that lead to their superior performance.
โญ Key Takeaways
Environmental scanning, SWOT analysis, and competitor intelligence are essential for understanding the organization's environment and form the foundation for effective forecasting. Forecasting methods fall into three categories โ quantitative (time-series and causal models), qualitative/technological (Delphi method, scenario analysis), and judgmental (jury of executive opinion, sales-force composite) โ each with different strengths, costs, accuracy levels, and appropriate time horizons. For forecasting effectiveness, managers should use simple techniques, avoid relying on a single method, shorten forecast lengths, and recognize that forecasting is a skill that can be improved. Benchmarking provides a systematic four-step process for identifying and implementing best practices from competitors or non-competitors to achieve superior performance.
๐ง Quick Revision Questions
- What are the three categories of forecasting techniques, and what is the primary difference between quantitative and qualitative forecasting?
- Explain the concepts of trend, seasonal pattern, and cyclical pattern in time-series forecasting.
- What is the difference between regression models and econometric models in causal forecasting?
- What are the four steps of the benchmarking process?
- Compare quantitative, technological, and judgmental forecasting methods in terms of time horizon, development cost, accuracy in identifying patterns, and ease of understanding.
๐ Lecture 21 โ Planning and Decision Aids-II
๐ Overview: This lecture covers advanced planning and decision-making tools used by managers to allocate resources effectively. It explains techniques like budgeting, scheduling, breakeven analysis, linear programming, and contemporary approaches like project management and scenario planning, which are essential for managing complex and dynamic organizational environments.
๐๏ธ Topics Covered
The lecture covers three main areas: techniques for allocating resources including budgeting (revenue, expense, profit, cash, and variable budgets), scheduling tools (Gantt charts and PERT networks), breakeven analysis, and linear programming; contemporary planning techniques including project management and scenario planning; and other planning techniques such as queuing models, simulation, and decision trees.
๐ Lecture Summary
1. Techniques for Allocating Resources
Resources are the assets of the organization and include financial, physical, human, intangible, and structural assets. Several techniques help managers allocate these resources effectively.
1) Budgeting
A budget is a numerical plan for allocating resources to specific activities. Budgets are popular because theyโre applicable to a wide variety of organizations and units within an organization. There are four different types of budgets:
- Revenue budget: a budget that projects future sales.
- Expense budget: a budget that lists the primary activities undertaken by a unit and allocates a dollar amount to each.
- Profit budget: a budget used by separate units of an organization that combines revenue and expense budgets to determine the unitโs profit contribution.
- Cash budget: a budget that forecasts how much cash an organization will have on hand and how much it will need to meet expenses.
These budgets are based on the assumption of a single specified volumeโfixed budgets. However, volume canโt be predicted exactly. Therefore, a variable budget is a budget that takes into account the costs that vary with volume.
2) Scheduling
Scheduling involves a list of necessary activities, their order of completion, who is to do each, and the time needed to complete them. Some useful scheduling tools include the following:
a) The Gantt Chart
The Gantt chart, named after Henry Gantt, is a scheduling chart that visually shows actual and planned output over a period of time. It is a specialized bar chart that shows the current progress on each major project activity relative to necessary completion dates.
- A project is broken down into separate main activities listed on the left side of the chart.
- The time frame is listed at the top or the bottom of the chart.
- The duration and scheduling of activities is shown by a bar.
- Gantt charts do not show interrelationships among activities.
- Software packages for creating and using Gantt charts (and many other decision tools) on computer are becoming widely available.
๐ก Why this matters: Gantt charts are simple visual tools that help managers track progress, but their limitation is that they don't show how activities depend on each other.
b) PERT (Program Evaluation and Review Technique)
PERT is a network planning method for managing and controlling large one-time projects. It is a technique for scheduling complicated projects comprising many activities, some of which are interdependent. A PERT network is a flowchart-like diagram that depicts the sequence of activities needed to complete a project and the time or costs associated with each activity.
The steps to construct a PERT network are:
- All of the major activities in the project are specified.
- The sequences of these activities are determined.
- A network diagram, a graphic depiction of the interrelationships among activities, is constructed.
- An activity is a work component to be accomplished, represented by an arrow on the network diagram.
- An event (or node) represents a single point in time that is the beginning or the ending of an activity.
- Three time estimates for each activity are determined and an expected time is calculated for each activity.
- The critical path is the path of activities and events in the network that will take the longest time to complete.
- Delays on any activities on the critical path mean that the project will be delayed.
- Slack is the degree of latitude about when various activities can be started without endangering the completion date of the entire project.
- After the project has begun, actual times for completion of each activity are collected and recorded on the PERT network so that any rescheduling and adjustments can be made as quickly as possible.
Key points to remember in PERT charts:
- Events are end points that represent the completion of major activities in a PERT network.
- Activities are the time or resources required to progress from one event to another in a PERT network.
- Slack time is the amount of time an individual activity can be delayed without delaying the whole project.
- Critical path is the longest or most time-consuming sequence of events or activities in a PERT network.
๐ Definition โ Critical Path: The longest or most time-consuming sequence of events or activities in a PERT network; delays on any activities on this path delay the entire project. ๐ Definition โ Slack Time: The amount of time an individual activity can be delayed without delaying the whole project.
3) Breakeven Analysis
Breakeven analysis is a technique for identifying the point at which total revenue is just sufficient to cover total costs.
4) Linear Programming
Linear programming (LP) is a mathematical technique that can be used to solve resource allocation problems. It is a quantitative tool for planning how to allocate limited or scarce resources so that a single criterion or goal (often profits) is optimized.
- It is the most widely used quantitative planning tool in business.
- There are optimal conditions for using linear programming:
- A single objective must be achieved.
- Attainable constraints exist.
- Variables are linearly related to the objective, i.e., an increase (or decrease) in the variable leads to a proportional increase (or decrease) in the objective.
2. Contemporary Planning Techniques
Two planning techniques appropriate for planning in an environment thatโs both dynamic and complex are project management and scenario planning.
1) Project Management
A project is a one-time-only set of activities that has a definite beginning and ending point in time. Project management is the task of getting a projectโs activities done on time, within budget, and according to specifications.
Project Management Process โ seven steps: i. Define objectives. ii. Identify activities and resources. iii. Establish sequences. iv. Estimate time for activities. v. Determine project completion date. vi. Compare with objectives. vii. Determine additional human resource requirements.
The role of the project manager: i. The only real influence project managers have is their communication skills and their power of persuasion. ii. Team members seldom work on just one project; theyโre usually assigned to two or three at any given time.
๐ก Why this matters: Project managers often lack formal authority over team members, so their success depends heavily on interpersonal skills and persuasion.
2) Scenario Planning
i. A scenario is a consistent view of what the future is likely to be. ii. Developing scenarios also can be described as contingency planning. iii. The intent of scenario planning is not to try to predict the future but to reduce uncertainty by playing out potential situations under different specified conditions. iv. Scenario planning is difficult to use when forecasting random events.
3. Other Planning Techniques
1) Queuing or Waiting-Line Models
Queuing or waiting-line models are mathematical models that describe the operating characteristics of queuing situations. i. Queuing situations can be any combination of single-server or multiple-server queues:
- Single-server queues involve service provided at a single point.
- Multiple-server queues occur when a number of stations draw from a single line. ii. Queuing models allow managers to vary the parameters of a situation to determine the probable effects.
2) Simulation Models
Simulation is a mathematical imitation of reality. It is used when the situation is too complex for linear programming or queuing theory.
3) Decision Trees
Decision trees are graphic models displaying the structure of a sequence of alternative courses of action and usually showing payoffs associated with various paths and probabilities associated with potential future conditions.
โญ Key Takeaways
Managers must master various resource allocation and planning tools to operate effectively. Budgeting allocates financial resources through revenue, expense, profit, and cash budgets, with variable budgets adjusting for volume changes. Scheduling tools like Gantt charts provide visual project progress tracking but do not show interrelationships, while PERT networks model complex interdependent activities using critical path and slack time concepts. Contemporary planning relies on project management for one-time initiatives with definite timelines and scenario planning for reducing uncertainty in dynamic environments. Additional quantitative tools like linear programming, queuing models, simulation, and decision trees help managers optimize resource allocation under constraints and complex conditions.
๐ง Quick Revision Questions
- What are the four types of budgets, and what is the difference between a fixed budget and a variable budget?
- How does a Gantt chart differ from a PERT network in terms of what information each provides about project activities?
- What is the critical path in a PERT network, and why is it important for project management?
- Under what conditions is linear programming most appropriately used for resource allocation?
- What is the primary purpose of scenario planning, and why is it described as contingency planning?