π Lecture 40 β Cash Management and Working Capital Financing
π Overview: This lecture explores the critical link between dividend policy and cash management, explaining how firms decide whether to pay dividends or retain earnings based on the relationship between ROE and required return. It also covers inventory management, accounts receivables management, credit policy, and working capital financing policies, focusing on how firms finance their current assets.
ποΈ Topics Covered
The lecture begins with the cash dividend payout decision, using Gordon's Formula to determine when to pay dividends versus when to plough back earnings based on ROE compared to rE. It then moves to inventory management, covering inventory types, costs, and policies like EOQ, JIT, and outsourcing. Accounts receivables management is discussed next, including calculation of receivables and credit policies with terms like "5/10.net 30." Finally, the lecture covers three working capital financing policiesβaggressive, conservative, and moderateβbased on the maturity matching principle.
π Lecture Summary
Cash Dividend Payout Decision:
There is a direct link between dividend policy and cash management β cash dividends are paid out of cash. Cash is an idle asset that does not generate any return for the company. The firm must decide whether to pay cash dividends based on the impact on share price and firm value.
Gordon's Formula is used to analyze the dividend policy issue:
- Formula: Po (Share Price) = DIV1 / (rE β g) = EPS x (DIV1/EPS) / (rE β (Pb x ROE))
- Where:
- DIV1 = Forecasted dividend in the next year
- rE = Required rate of return on equity
- g = Growth rate in dividends
- Pb = Plough back ratio
The two key criteria for deciding about dividends are ROE and rE. ROE is a financial accounting measure of the firm's ability to internally generate a return. rE is the return that the firm's shareholders require. Firms try to keep ROE HIGHER than rE.
-
If ROE < rE: The firm is not generating enough return to meet shareholder requirements. It is better to payout the dividend. Lower ROE means the company is not finding sufficient projects to generate enough return. In this case, share price Po (and Firm Value) will RISE as dividend announcement has a positive impact.
-
If ROE > rE: The firm is better off to Plough the Retained Earnings back into the business and invest in Positive NPV Projects. The company is generating higher return than shareholders require. In this case, if the firm makes a Dividend payout, share price (and Firm Value) Po will FALL. It makes sense to keep cash and invest.
-
If ROE = rE: Dividend payment has no impact on share price.
π‘ Why this matters: This decision directly affects shareholder wealth. Paying dividends when ROE is low signals confidence and increases value, while retaining earnings when ROE is high allows the firm to invest in profitable projects.
Inventory Management:
Inventory is a major part of working capital. There are 3 Types of Inventories: Raw Material, Work in Process, and Finished Goods.
Key issues in inventory management include:
- Inventory is acquired BEFORE sales, so estimates must be accurate. EOQ (Economic Order Quantity) is difficult to estimate otherwise.
- Shortfall in Inventories causes interruptions in production and loss of sales orders.
- Surplus Inventories causes high carrying costs, wastage, and depreciation.
- Case of Eid Time Sales: Using short-term finance to buy extra inventory can be risky. If you can't sell it, you will be forced to sell at a deep discount, sell at a loss, and possibly default on loans.
Inventory Costs include:
- Carrying Costs (cost of capital, storage/warehouse rent, insurance premium, wastage) β as high as 20 β 30% of Inventory value
- Shipping Costs β generally less than 5% of Inventory value
- Cost of Running Short β loss of sales, customers, and goodwill (difficult to estimate)
Inventory Management Policies:
- Technology Based: Dynamic Systems using MRP (Material Resource Planning) and ERP (Economic Resource Planning) Software
- JIT (Just in Time): Developed by Toyota. Supplies arrive just a few hours before they are used. Inventory and Working Capital is minimized.
- Outsourcing: Instead of making all parts yourself, buy from outside suppliers at lower cost. Example: IT Divisions of large American MNCs outsource software writing to Pakistani software houses.
Accounts Receivables Management:
Accounts receivables are created out of credit sales. Most firms prefer cash sales, but competition forces them to sell on credit.
-
Account Receivables = Credit Sales per day x Average Number of Days of Credit
- Example: Account Receivables = Rs.10,000/day x 30 days = Rs.300,000 of fabric "stuck in the market"
-
A/c Receivables need to be financed somehow (short-term loan, trade credit, etc.)
-
A/c Receivables = Daily Sales x ACP
- ACP (Average Collection Period) = weighted average days of credit, obtained from Ageing Schedule
- Example: Firm makes 30% of sales on 30-day credit and 70% on 60-day credit. ACP = (0.3x30) + (0.7x60) = 9 + 42 = 51 Days
- Try to minimize Average Collection Period and daily credit sales.
Credit Policy:
Factors considered for credit include:
- Credit Quality Aspect: Proper assessment of credit-worthiness of each customer
- Minimize Time (Credit Duration or ACP) and Value (Credit Given)
- Creative Credit Terms
- Incentivize customers to pay cash and pay quickly: "Sell on 5/10.net 30 basis". 30 means customer must pay full cash value within 30 days. 5/10 means 5% discount for customers who pay within 10 days.
- Impose Carrying Charge on Late Payments: Example: 2% late payment charges if bill is not paid within 30 days β that's 24% penal interest per year. If customer does NOT pay Rs.100,000 bill within 1 month, they pay Rs.2,000 extra for every month late.
Working Capital Financing Policies:
Sales fluctuate with nature of business, time, season, and state of economy.
- TEMPORARY CURRENT ASSETS β Usage less than 1 year. Fluctuate with economic conditions (growth = high inventories, recession = low inventories)
- PERMANENT CURRENT ASSETS β Never drop to zero; always minimal
- Total Assets = Fixed + Permanent Current + Temporary Current
- Total assets steadily grow; temporary current assets fluctuate
3 Policies for Working Capital Financing (based on Maturity Matching Principle):
-
Aggressive Policy: Maximum short-term financing at low cost (but risk of non-renewal). Use short-term financing for Temporary Current Assets and even partly for Permanent Current Inventory.
-
Conservative Policy: Maximum long-term financing. Safe but higher interest costs. Use long-term financing for Fixed Assets, entire Permanent Assets, and even part of Temporary Current Assets.
-
Moderate Policy: Balance of long and short-term financing. Long-term financing for Fixed and Permanent Current Assets. Short-term financing for Permanent Current Assets. Spontaneous Current Liability financing for Temporary Current Assets.
Advantages of Short Term Debt: Speed, flexibility, lower interest rates (generally upward sloping yield curve) Disadvantage of Short Term Debt: Cost is uncertain and variable in long run; non-renewable.
π‘ Why this matters: The maturity matching principle ensures that the duration of financing matches the usage life of the asset, reducing refinancing risk and minimizing interest costs.
β Key Takeaways
The dividend payout decision hinges on comparing ROE to rE β if ROE is lower, pay dividends to increase share price; if higher, retain earnings for reinvestment. Inventory management requires balancing carrying costs (20-30% of value) against shortage costs, with policies like JIT and outsourcing improving efficiency. Accounts receivables should be minimized by reducing the average collection period, and credit terms like "5/10.net 30" incentivize early payment. Working capital financing follows the maturity matching principle, with three policies β aggressive, conservative, and moderate β each balancing cost and risk. Short-term debt offers speed and lower rates but carries renewal risk.
π§ Quick Revision Questions
- According to Gordon's Formula, what happens to share price (Po) if ROE is less than rE and the firm pays dividends?
- What are the three types of inventories, and what percentage of inventory value do carrying costs typically represent?
- A firm sells Rs.15,000 per day on credit with an ACP of 45 days. What is the value of accounts receivables?
- Explain the credit term "5/10.net 30" β what discount is offered and for how long?
- In the moderate working capital financing policy, how are temporary current assets financed?
π Lecture 41 β SHORT TERM FINANCING, LONG TERM FINANCING AND LEASE FINANCING
π Overview: This lecture focuses on the sources and strategies for financing a firm's operations, covering both working capital financing and long-term debt. It emphasizes the critical trade-off between liquidity (risk) and profitability (return), introduces the Maturity Matching Principle for financing decisions, and explains lease financing as an alternative to traditional debt.
ποΈ Topics Covered
The lecture covers the classification of financing into permanent and temporary sources, explaining the characteristics, risk, and cost of each. It details the Tradeoff between Liquidity and Profitability, the Hedging Principle (Maturity Matching) for asset-financing alignment, and three working capital financing policies: Aggressive, Conservative, and Moderate. It also examines factors influencing long-term debt financing decisions, lists types of short and long-term debt, and provides an overview of Lease Financing, its mechanics, and advantages from the Lesseeβs perspective.
π Lecture Summary
Working Capital Financing
Financial managers spend over 50% of their time on working capital financing, which involves arranging funds for day-to-day expenses like inventory and raw materials. The sources of financing are categorized into Permanent and Temporary.
Permanent Financing comes in two main forms:
- Long-term Loans / Bonds: Duration is more than 1 year. It has Low Risk for the firm due to stable, long-term access to funds but carries a High Cost due to interest.
- Common Equity / Stock: This is "Perpetual" by definition. It has the Least Risk for the firm but the Highest Cost.
Temporary Financing also has two forms:
- Short-term Loan: Duration is less than 1 year (e.g., 3, 6, 9 months). It is easier and less costly to obtain than long-term loans due to lower interest rates generally. However, the interest cost is variable/uncertain as it must be renewed, making it More Risky and less liquid.
- Spontaneous Financing: This arises from Current Liabilities like Trade Credit, Accrued Taxes, and Wages Payable. It is essentially a free, interest-free loan from suppliers but comes with the Highest Uncertainty/Risk as the amount and timing are unpredictable. It has the Least Cost (can be free).
π Definition β Tradeoff between Liquidity (Risk) & Profitability (Return):
- High Current Assets means High Liquidity but Low Profitability (more money tied in low-yield current assets).
- Low Current Assets means High Profitability but High Risk (money tied in fixed assets may not be available for payments).
- High Long-term Debt means Low Risk of illiquidity but High Cost of Debt (interest).
- High Current Liabilities (like Trade Debt) means Low Cost but High Risk of illiquidity.
Graphical View of Financing: Maturity Matching Principle
The Maturity Matching Principle (or Hedging Principle) states that a firm should match the maturity of the financing to the usage time of the asset.
How Much Liquidity to Keep? A firm must keep enough liquidity to meet maturing short-term obligations (e.g., Accounts Payable, Interest) on time. The decision on how much short-term vs. long-term financing to use is based on this principle.
π‘ Why this matters: Using long-term financing for a temporary need is costly (idle liquidity). Using short-term financing for a long-term asset is risky (the loan may expire before the asset generates cash flows to repay it).
- Example 1 (Matching): A shoe shop owner needing extra inventory for Eid (a seasonal, temporary event) should use a Short-term Loan (Current Liability). Using a Long-term loan would create IDLE LIQUIDITY that yields no return but still costs interest, lowering profits.
- Example 2 (Matching): A studio owner buying a sophisticated Sony Digital Camera costing Rs. 1.5 million with an Economic Life of 5 years and a Payback Period of 2 years should use a Long-term Loan with a maturity over 2 years. This ensures sufficient time to repay interest from the asset's cash flows.
- Hedging Principle Rule:
- Permanent Asset Investments (Fixed Assets or Current Assets held > 1 Year) β should be financed by Permanent Financing (Long-term Debt & Equity).
- Temporary Assets (Current Assets liquidated within 1 year) β should be financed by Temporary Financing (Short-term Loans & Spontaneous Financing).
Working Capital Financing Policies
Total Assets = Fixed Assets + Permanent Current Assets + Temporary Current Assets. Three policies exist based on the Hedging Principle of Maturity Matching:
- Aggressive Policy: Uses Maximum Short-term financing at low cost, but with high risk of non-renewal. Short-term financing is used for Temporary Current Assets and even partly for Permanent Current Inventory.
- Conservative Policy: Uses Maximum Long-term financing. It is safer but has higher interest costs. Long-term financing is used for Fixed Assets, the entire Permanent Assets, and even part of Temporary Current Assets.
- Moderate Policy: Strikes a Balance between Long and Short-term financing, based on the Maturity Matching Principle. Long-term permanent financing is used only for Fixed Assets and Permanent Current Assets. Spontaneous or short-term financing is used only for the temporary portion of current assets.
Long-term Debt Financing
Factors influencing the choice of long-term finance (What Affects Financing Decisions):
- Capital Structure: The process of matching the actual capital structure to the optimum one is "Sticky" and never-ending.
- Maturity Matching (Hedging Principle): Matching maturity of debt to asset usage time.
- Interest Rates: Secure long-term financing when long-term interest rates are low.
- Financial Health & Credit-worthiness: Secure long-term financing while the firm is still healthy.
Types of Debt Financing:
- Short-term Debt:
- Bank Loans: Maturity < 1 Year. Requires Collateral (e.g., Property, Inventory, A/c Receivables).
- Commercial Paper: An unsecured promissory note issued by large, strong firms.
- Long-term Debt Financing (Maturity > 1 Year):
- Bank βTerm Loansβ: > 1 Year.
- Bonds: Include Debentures (unsecured), Mortgage (secured by real estate), and Floating Rate (interest rate changes with market).
- Syndicated Loan: For large loans, one lead bank heads a team of other banks to share the risk and liability.
- Project Financing: For large infrastructure projects. A group of firms invests equity, and a bank gives a loan to the New Project (not the firms), to be repaid only from the project's cash flows. The bank protects itself by controlling all cash flows.
- Securitization: Converting a private debt contract into a publicly traded financial instrument by dividing a large loan into smaller, tradeable parts.
Lease Financing
Leasing of Fixed Assets is a method of financing capital expenditure. Key terms and mechanics:
- Leasing Company (Lessor): Buys and owns the asset.
- Borrower (Lessee): Uses, operates, and controls the asset in return for paying Lease Rental to the Lessor.
- Nature: It is like a Collateralized Loan where the leased asset is the collateral. Failure to pay Lease Rental is as serious as failing to pay interest, and can bankrupt the Lessee. The Lessor can seize the asset and demand up to 1 year of lease rental.
- Scale: Between 10-30% of fixed assets owned by large companies (e.g., warehouses, computers, airplanes) are leased.
General Advantages from Lesseeβs (Borrower/User) Point of View: Guide for when lease financing should be used:
- Less risky than investing large sums in fixed assets for new businesses suffering from Cyclicality (e.g., airlines).
- More suitable for hi-tech assets that become Obsolete quickly (e.g., software hardware).
- Useful when product demand and thus equipment life is uncertain.
- The Lender (Lessor) has to share a portion of operational risk and maintenance costs (e.g., IBM).
β Key Takeaways
- The fundamental trade-off in working capital management is between Liquidity (Risk) and Profitability (Return); high liquidity generally means low profitability and vice-versa.
- The Maturity Matching (Hedging) Principle is a core rule: finance long-term assets with long-term debt/equity and short-term assets with short-term/spontaneous financing to minimize risk and idle costs.
- The three Working Capital Financing Policies (Aggressive, Conservative, and Moderate) represent different positions on the risk-return spectrum, based on the mix of short-term and long-term financing used.
- Spontaneous Financing (like trade credit) is the cheapest source of funds but is highly uncertain and risky, while Lease Financing is a crucial alternative for acquiring fixed assets that reduces risk for the user, especially for cyclical or high-tech assets.
- Long-term debt is not a monolith; it includes bank term loans, bonds (various types), syndicated loans, project financing (with its unique cash-flow-based security), and securitized instruments.
π§ Quick Revision Questions
- What is the main trade-off when a firm decides to use a high level of Long-term Debt versus a high level of Current Liabilities for financing?
- Explain the Hedging Principle (Maturity Matching) with a concrete example for financing a piece of machinery expected to last 7 years.
- In the context of Working Capital Financing Policies, describe the Aggressive Policy. What asset categories does it finance with short-term funds?
- What are the key characteristics and risk-mitigation strategies of Project Financing as a form of long-term debt?
- From the Lesseeβs perspective, state three specific advantages that make Lease Financing a more attractive option than purchasing an asset outright with a loan.
π Lecture 42 β Lease Financing and Types of Lease Financing
π Overview: This lecture introduces lease financing as an alternative to traditional debt financing for acquiring fixed assets. It explains the fundamental mechanics of leasing, compares different types of lease arrangements, and provides analytical frameworks (NAL, IRR, and WACC impact) to help determine whether leasing or buying is the better financial decision.
ποΈ Topics Covered
The lecture covers the concept and mechanics of lease financing including the roles of lessor and lessee, general advantages of leasing from the lessee's perspective, three major types of lease financing (Financial Lease, Operating Lease, and Sale & Lease-Back) with detailed examples, and quantitative lease analysis methods including Net Advantage of Leasing (NAL), IRR for leasing decisions, and the feedback effect of lease financing on WACC and capital budgeting.
π Lecture Summary
Lease Financing
Lease financing involves the leasing of fixed assets for capital expenditure. The Leasing Company (Lessor) buys/owns the asset while the Lessee (Borrower) controls, operates, and uses it. The Lessor receives regular and fixed Lease Rental payments. The lifespan of a lease is limited, ranging from a few months to several years.
This arrangement is essentially like a Collateralized Loan, where the leased asset serves as collateral. The lease contract is as serious as a loan agreement β failure to pay lease rental is equivalent to failure to pay interest and can bankrupt the Lessee. The Lessor can seize the leased asset and, if the claim is larger, also demand up to one year of lease rental.
The two parties are:
- Lessor (Leasing Company)
- Lessee
Ownership vs. Control: Ownership of the asset remains with the leasing company, while control is with the lessee. In most countries, 10-30% of fixed assets owned by companies are leased, including warehouses, offices, equipment, machinery, computers, cars, furniture, and airplanes.
General Advantages of Leasing from Lessee's Point of View:
- Less risky than investing a large amount of own money in expensive fixed assets, especially in new businesses subject to Cyclicality (e.g., airplanes)
- More suitable for hi-tech assets that become Obsolete quickly
- Suitable when product demand and hence equipment life is uncertain
- Lender has to share a portion of operational risk and maintenance costs
π‘ Why this matters: Leasing allows businesses to use assets without large upfront capital outlays, transferring some operational risk to the lessor.
Types of Leasing Finance
1- Financial Lease (or Capital Lease)
This is the most popular form of leasing in Pakistan. A Financial Lease is Fully Amortized, meaning the Lessor recovers BOTH the full Value of Asset (Principal amount) AND the Profit (in the form of interest or mark-up). Both are built into the Lease Rental amount collected by the Lessor over the lifespan of the Lease. This is similar to the AMORTIZATION TABLE for a Bank Loan where Principal and Interest are recovered in equal regular installments.
A Financial Lease is NOT Cancelable. If the Lessee MUST Cancel or Terminate the Lease prematurely, they pay a heavy penalty to the Lessor.
π Example of Financial Lease: You need to buy a Pentium IV computer hardware system complete with peripherals but don't have enough money. You negotiate the price at Rs.50,000 at a computer hardware store. You then contact a leasing company to buy the computer system and lease it to you in return for a monthly rental of Rs.5,000 per month. After one year, if you have paid all the lease rentals on time, the Leasing Company will transfer the Ownership to you.
Advantages of Financial Lease for Lessee:
- Useful when a factory needs to buy a new machine urgently but does NOT have enough finances
- Leased Assets (and lease liabilities) can sometimes be treated as OFF THE BALANCE SHEET ITEMS (though accounting standards like FASB USA restrict this; generally, lease DOES affect DEBT RATIO & Capital Structure similarly to a Loan on the Balance Sheet)
- If a Company cannot justify an increase in Assets on the Balance Sheet based on historical earnings, capital expenditure in Leased Asset can be "Expensed" out gradually
- Lease Rental is a TAX-DEDUCTIBLE EXPENSE just like interest payments
- As long as IRR from leased equipment is higher than cost of lease financing
π Definition β Fully Amortized Lease: A lease arrangement where the lessor recovers the principal amount plus interest amount through the lease rentals over the lease lifespan.
2- Operating Lease (or Service Lease)
An Operating Lease offers financing AND maintenance. Often the Lessor is the Supplier/Vendor of the Asset (e.g., IBM). An Operating Lease is NOT FULLY AMORTIZED AND IS CANCELLABLE.
π Example of Operating Lease: A car rental company (Lessor) charges you Rs.1,000 per day for renting out a new Honda Civic with driver. You can lease the car for 2 days. You will pay the Lessor Rs.2,000. BUT, the value of the car might be Rs.1 million. The Lessor does NOT expect you to pay that entire amount for using the car for just 2 days. The car rental company will service and maintain the car in good condition so it can rent it out to other people. They can recover the value of the car from 1000 days of lease rent (= value / daily rental = 1,000,000 / 1,000). This is the Payback Period (without taking their maintenance costs and profit margin). You can Cancel the lease and return the car after 1 day, paying only Rs.1,000.
Other examples include IBM for Computer Hardware and Boeing for Airplanes.
By not fully amortizing the operating lease, the leasing company does not expect to recover the whole amount or value of the asset from you.
3- Sale & Lease-Back
Sale & Lease-Back is the most interesting leasing scheme β a creative extension of Financial Lease where the Seller of the asset is the User-lessee. The User sells their asset to the Leasing Company in return for lump-sum cash and then repays the Leasing Company in the form of Lease Rentals over a period of time to buy-back the asset. It is considered a creative way of mobilizing your asset to raise debt.
π Example of Sale & Lease-Back: You need Rs.300,000 to start a business and all you own is a car. You go to a Leasing Company and ask them to buy your car for Rs.300,000 and then lease it back to you for 1 year. The Leasing Company takes ownership of the car and gives you Rs.300,000 cash to start your business. Suppose you expect to earn Rs.50,000 per month from your business. You can easily pay Rs.30,000 per month as lease rental and get your car back in 1 year. Remember, the company bought the car from you for Rs.300,000 but you will pay Rs.360,000 back to the company at the end of the period to get your car back. The Rs.60,000 is the profit or interest or mark-up the Company is charging above the principal amount of Rs.300,000.
Lease Analyses & Calculations
To Buy or To Lease? β That is the question. Here we perform numerical calculations to help decide whether it is better to lease.
Assume that the Decision to Acquire the Asset has already been made independently at the Capital Budgeting Stage (which comes first).
NAL (Net Advantage of Leasing) NAL is similar to NPV in Capital Budgeting. It is modified for Leasing Analysis.
π Definition β NAL (Net Advantage of Leasing): PV (Cost of Owning Asset) β PV (Cost of Leasing). If NAL > 0, then Leasing is Better than Buying.
Cost of Owning Asset includes the following Cash Flows:
- Initial investment (Io)
- Yearly maintenance and service costs
- Yearly depreciation tax savings
- Replacement or salvage value of the asset at the end of its life
- Final net residual value (after any tax)
Cost of Leasing includes the following Cash Flows:
- Yearly Lease Rentals
- Yearly Tax Savings associated with Lease Rentals
Discount Rate "r": Generate Cash Flow forecasts for the life of the asset. Cash Flows are quite FIXED AND CERTAIN, so use a LOW DISCOUNT RATE:
- r = mark-up rate on bank loan, OR
- Use Risk Free Rate of Return (rRF) = T-bill Interest rate
- If the Company is operating, use actual average cost of Debt
IRR for Leasing (Similar to Capital Budgeting) Set the NAL = 0 and solve for the Discount Rate "r" using Trial and Error or Iteration. This gives the value of IRR. The IRR % can simply be compared to mark-up % on bank loans and also to the market rate of interest and inflation rate. If IRR < interest rate on loan, then leasing is better than buying.
Lease Analysis (WACC)
WACC (Capital Structuring Criterion) π Definition β WACC (Weighted Average Cost of Capital): WACC = rD Γ D + rE Γ E (where rD is AFTER-TAX Cost of Debt). Lease IRR % affects "rD" β the After Tax Cost of Debt. WACC can be used as the Discount Rate "r" in NPV calculations in Capital Budgeting.
Practically speaking, corporate financing and capital structure have a feedback effect on the capital budgeting decision. This means that capital budgeting ranking of projects may have to be revised, taking into account the cost of debt (or leasing). The effect is minor because projects are selected based on strategic value and operational efficiency, not just minor differences in NPV.
Leasing (and financing decisions in general) can (very rarely) have a FEEDBACK EFFECT on Capital Budgeting Decisions. Suppose you had to choose one of 3 possible projects and you picked Project A at the Capital Budgeting Stage (based on NPV). Many weeks later, you begin to decide where to raise the money and HOW TO FINANCE Project A. You need a bank loan at 15% pa interest. You realize now that another Project B (which had been rejected at the Capital Budgeting Stage) uses equipment that can be LEASED at a lower cost (say 13%). You had done the Capital Budgeting exercise using your company's WACC as the discount rate in the NPV calculation. That WACC used the company's actual interest cost on bank loans as the after-tax cost of debt. But since Project C can use the cheaper Lease Financing, you should RE-CALCULATE its NPV using the Cost of Lease (i.e. IRR) as the discount rate. This case is rare, and the difference of a few percentage points in the cost of debt should not change a fundamental decision based on cash-flows, operational effectiveness, and overall strategic advantage of investing in a project.
β Key Takeaways
The three main types of lease financing β Financial Lease (fully amortized, non-cancelable, transfers ownership), Operating Lease (not fully amortized, cancelable, includes maintenance), and Sale & Lease-Back (selling an asset to raise cash then leasing it back) β serve different business needs depending on asset type, usage duration, and cash flow requirements. The Net Advantage of Leasing (NAL) is the primary analytical tool, calculated as PV(Cost of Owning) β PV(Cost of Leasing), where NAL > 0 favors leasing. The internal rate of return (IRR) from leasing should be compared with bank loan interest rates β if lease IRR is lower than loan interest, leasing is preferable. Finally, while leasing decisions can theoretically create a feedback effect on capital budgeting by altering the discount rate, this effect is rare and minor compared to strategic and operational considerations in project selection.
π§ Quick Revision Questions
- What are the three types of lease financing, and how do they differ in terms of amortization and cancelability?
- How is the Net Advantage of Leasing (NAL) calculated, and what does a positive NAL indicate?
- In the Sale & Lease-Back example with the car, what was the total profit earned by the leasing company?
- Why should a low discount rate be used in lease analysis cash flow forecasting?
- What is the feedback effect of lease financing on capital budgeting decisions, and why is it considered rare and minor?
π Lecture 43 β Mergers and Acquisitions
π Overview: This lecture introduces the specialized field of Mergers and Acquisitions (M&A), explaining why firms merge or acquire other firms, the various types of mergers, and the mechanisms of financing such transactions. It also covers critical issues like hostile takeovers and leveraged buyouts, along with valuation methods for target firms β essential knowledge for understanding corporate restructuring and strategic financial management.
ποΈ Topics Covered
The lecture covers the rationale behind mergers and acquisitions including diversification, financial improvement, and agency costs; the types and categories of mergers (horizontal, vertical, co-generic, conglomerate); acquisition mechanisms including hostile takeovers and defenses like poison pills and white knights; leveraged buyouts (LBOs) and management buyouts; the social and market impacts of mergers; and two valuation approaches β Discounted Cash Flows (DCF) and Market Multiple Analysis (MMA) β along with the impact of merger price on firm value.
π Lecture Summary
Mergers & Acquisitions (M&A)
The buying and selling of entire firms or divisions of firms is a specialized art in finance. Several reasons explain why firms merge:
- Diversification: To reduce risk and stabilize earnings, attain economies of scale, achieve long-term strategic goals, gain larger market share, and achieve quick growth in size.
- Improving Financials: A quick way to improve the Balance Sheet and cash flows.
- Find Cash: If another firm has large cash flows, cash reserves, or liquid assets.
- Cherry Picking: When the market value of another similar firm is less than the cost of replacing your own assets, it might be better to buy another firm.
- Asset Stripping: Separate out the non-profitable divisions and sell their assets individually to generate cash and restore profitability.
- Agency Cost: Desire of managers for prestige, power, and salary, sometimes at the expense of shareholders (owners). This includes winning management control (exercising influence on the board), rising manager salaries (larger firm = higher agency costs), and fear of losing job if taken over by a rival firm.
π Definition β Merger: When 2 or more firms combine to form 1 firm.
π Definition β Synergy: The benefit of a merger where the value of a combined firm after merger is more than the firms' value individually before the merger. Formula: 2 + 2 = 5!
π‘ Why this matters: Synergy is the core justification for most mergers β without it, the merger destroys shareholder value.
There are 2 Broad Categories of Mergers:
- Pure Financial Merger: Operations remain independent.
- Operating Merger: Operations are integrated and changed, and synergies are expected.
There are 4 Specific Types of Mergers:
- Horizontal Merger: Merger of 2 competitors β can lead to monopoly.
- Vertical Merger: Merger of a supplier with a buyer.
- Co-generic Merger: Merger of firms in the same industry.
- Conglomerate Merger: Merger of firms in unrelated industries.
π Definition β Acquisition: The most common form of merger, where a firm buys another firm. This acquisition can be "Hostile" Raid or "Friendly". The firm that acquires is called the acquirer firm, and the firm being acquired is called the target firm.
π Definition β Divestiture: Reverse merger. Benefit of efficient reallocation of resources: 5 - 1 = 5! By selling an inefficient or unproductive unit, you can have more value as it saves costs.
Three types of divestitures:
- "Sell off": Sale (transfer ownership) of a division of a firm.
- "Spin off": Transfer management control of a division of a firm.
- "Liquidation": Sale of assets to pay off shareholders.
Merger Issues & Regulations
- Monopoly (concentration of power and market share): Horizontal or vertical merger of 2 giants. Laws vary from country to country, e.g., Anti-Trust Laws.
- Hostile Acquisitions (or Takeovers) by Corporate Raiders: Two basic ways of hostile takeovers:
- Canvassing general public shareholders for their Proxy Votes.
- Limited-time Share Tender Offer by raider at share price above the market. Corporate raiders urge shareholders to buy their shares.
How Target Firm Can Respond to Hostile Raid:
- Poison Pill: Target firm takes on excessive short-term debt to appear unhealthy. Because of high liabilities, their balance sheet becomes unattractive.
- White Knight: A wealthy friendly investor who protects the target firm by making a higher counter-tender offer against the corporate raider.
- Fight Back: Target firm makes counter-tender offer to shareholders.
- Be Acquired (if raider is offering much higher value than the firm is worth).
The target firm needs protection under law β shareholders might lose ownership and employees might lose their jobs.
Leveraged Buy-Outs (LBO's)
Mechanism of Leveraged Buy-Outs (LBO's) using Debt Financing: The acquiring firm borrows a lot of money (from debt investors) to buy the shares of another publicly traded target firm. The public firm thus becomes "Privatized" in the hands of fewer shareholders, meaning less administrative costs. It then sells assets (Asset Stripping) of the target to make immediate interest payments. If the firm runs into difficulty, it can raise more money by selling its own Junk Bonds. After restructuring, cost cutting, and down-sizing, the firm (now financially stronger) again goes public, giving opportunity for its stakeholders, deal-makers, and investment bank advisers to recover their investment and encash capital gains.
Possible Advantages of LBO: Debt increases Tax Shield Savings, leverage can improve ROE, and forces cost-cutting measures by management.
π Definition β Management Buyouts & "Going Private": A type of LBO where management buys all or most of publicly held shares of their own firm and effectively converts the public firm into a privately held one.
Mergers - Good or Bad?
Impact of Mergers on Market, Shareholder, & Employees:
- Temporary increase in stock price because of competing tender offers by buyer. Wrong signals distort market prices.
- Target firms forced to take drastic measures to defend themselves (e.g., poison pills). Waste of firm's resources and value.
- Mergers often followed by cost cutting and streamlining which can improve operational efficiency and add synergy. BUT, down-sizing of employees or job cuts can lead to serious social problems.
Numerical Valuation of a Target Firm Merger Analysis & Valuation
2 Basic Approaches to Mergers Analysis and Valuation:
- Discounted Cash Flows (DCF)
- Market Multiple Analysis (MMA)
Discounted Cash Flows (DCF) uses NPV (as used in Capital Budgeting):
- Estimate Post-Merger Proforma (forecasted) Net After-Tax Incremental Cash Flows (CF's) of target firm for 5 years or more. Account for post-merger change in operations impact on incremental cash flows.
- Use the Present Value Equation:
- PV = CFβ / (1+r) + CFβ / (1+r)Β² + CFβ / (1+r)Β³ + ...
- Discount Rate (r) or Cost of Capital for prospective investors (i.e., shareholders of the acquiring firm, rββ) so focus on Equity Value of target firm (not total value).
- Use CAPM Theory / SML to estimate rβ (Required Return on Equity for Shareholders) from Beta (or Relative Market Risk) of target firm.
π Formula:
- rβ,β = rα΅£π» + (rβ - rα΅£π») Γ Ξ²β
- Ξ²β = Ξ²α΅€ [1 + (1 - Tβ) (D/E)] Where: Tβ = corporate tax rate, D = Debt, E = Equity
Numerical Valuation of Target Firm β Market Multiple Analysis (MMA)
Market Multiple Analysis (MMA) approach to merger valuation is the most commonly used because it is quick and easy. It uses approximate formulas and ad-hoc rules of thumb that change with different industries and change with time depending on macroeconomic conditions in the country.
Examples of Market Multiples used in Pakistan:
- Established Brand and Financially Healthy Textile Spinning Mill: Firm Value = 10 Γ Annual Net Income (or Earnings). The figure 10 comes from stock market reports analysis. Based on Current Average P/E Multiple for Textile Spinning Sector = Average Market Price of Share / Average EPS = 10.0.
- Financially Strong Operational Software House: Firm Value = 7 Γ Annual Sales.
- Operational Mobile Phone Company: Firm Value = Rs. 100,000 Γ Number of Connections.
- Value of Property in Pakistan: = 10 Γ Annual Rental Income.
Impact of Merger Price on Value of the Firm
Impact of Merger Price on Value of Acquiring Firm:
- If the Negotiated Price for Target Firm > Fair Price (or DCF Value Estimate) for Target Firm, then Acquiring Firm's Shareholders will Lose Value. This is because shareholders are paying more than the fair worth of the target company.
Impact of Merger Price on Value of Target Firm:
- If the Negotiated Price per share of target firm > Market Price of Target Firm's share in Stock Exchange, then Target Firm's Shareholders will Gain Value. Shareholders are being paid a price much higher than the firm's worth.
β Key Takeaways
Mergers and acquisitions are strategic tools for rapid growth, diversification, and financial restructuring, with synergy (2+2=5) as the primary benefit that must exceed the premium paid. The four merger types (horizontal, vertical, co-generic, conglomerate) serve different strategic purposes, while hostile takeovers can be defended against using poison pills or white knights. Leveraged buyouts use heavy debt financing to privatize public firms, offering tax shield advantages but carrying significant risk. Valuation of target firms uses two approaches: DCF (based on incremental cash flows and CAPM-derived discount rates) and Market Multiple Analysis (using industry-specific rules of thumb). The negotiated price critically determines whether value is created for the acquirer or target shareholders β overpaying destroys value for acquirers while underpaying deprives target shareholders of fair compensation.
π§ Quick Revision Questions
- What is the difference between a pure financial merger and an operating merger, and why does synergy matter more in one than the other?
- List and explain the four specific types of mergers with an example of each.
- What is a leveraged buyout (LBO), and how does asset stripping and junk bonds play a role in its mechanism?
- How would you calculate the required return on equity (rβ) for a target firm using CAPM, and what role does beta play in this calculation?
- If a textile spinning mill in Pakistan has an annual net income of Rs. 50 million, what is its estimated firm value using Market Multiple Analysis, and what assumption does this valuation rely on?