π Lecture 18 β Cost Analysis and Estimation
π Overview: This lecture examines the fundamental concepts of cost analysis essential for managerial decision-making. It distinguishes between different cost typesβexplicit versus implicit, historical versus current, and fixed versus variableβand explains how these distinctions affect optimal business choices. Understanding these cost concepts is critical because they form the basis for production planning, pricing strategies, and profitability analysis.
ποΈ Topics Covered
The lecture covers the nature of costs including explicit and implicit costs, the opportunity cost concept, historical versus current costs, replacement cost, marginal versus incremental cost, sunk costs, short-run and long-run costs, fixed and variable costs, and detailed analysis of short-run cost curves including total, average, and marginal cost relationships with supporting numerical examples and graphical illustrations.
π Lecture Summary
THE NATURE OF COSTS
Cost is an important consideration in managerial decision-making, and cost analysis is an essential aspect of managerial economics. Cost analysis is made difficult by the effects of unforeseen inflation, unpredictable changes in technology, and the dynamic nature of input and output markets.
EXPLICIT AND IMPLICIT COSTS
Typically, the costs of using resources in production involve both out-of-pocket costs, or explicit costs, and other non-cash costs, called implicit costs. Wages, utility expenses, payment for raw materials, interest paid to the holders of the firm's bonds, and rent on a building are all examples of explicit expenses. The implicit costs associated with any decision are much more difficult to compute. These costs do not involve cash expenditures and are therefore often overlooked in decision analysis.
One crucial distinction in the analysis of costs is between explicit and implicit costs. Explicit costs refer to the actual expenditures of the firm to hire, rent, or purchase the inputs it requires in production. These include wages to hire labor, the rental price of capital, equipment, and buildings, and the purchase price of raw materials and semi-finished products. Implicit costs refer to the value of the inputs owned and used by the firm in its own production activity. Even though the firm does not incur any actual expenses to use these inputs, they are not free, since the firm could sell or rent them out to other firms. The amount for which the firm could sell or rent out these owned inputs to other firms represents a cost of production of the firm owning and using them. Implicit costs include the highest salary that the entrepreneur could earn in his or her best alternative employment.
In economics, both explicit and implicit costs must be considered. In measuring production costs, the firm must include the alternative or opportunity costs of all inputs, whether purchased or owned by the firm. The reason is that the firm could not retain a hired input if it paid a lower price for the input than another firm. Similarly, it would not pay for a firm to use an owned input if the value of the input is greater to another firm. These economic costs must be distinguished from accounting costs, which refer only to the firm's actual expenditures or explicit costs incurred for purchased or rented inputs. Accounting or historical costs are important for financial reporting by the firm and for tax purposes. For managerial decision-making purposes, however, economic or opportunity costs are the relevant cost concept that must be used.
π Example: Suppose a firm purchased a machine for $1,000. If the estimated life of the machine is 10 years and the accountant uses straight-line depreciation ($100 per year), the accounting value is zero at the end of the tenth year. However, if the machine can still be used for another year and the firm could sell it for $120, the cost of using the machine is zero for the accountant but $120 for the economist. Incorrectly assigning zero cost would lead to wrong managerial decisions.
OPPORTUNITY COST CONCEPT
Opportunity cost is the foregone value associated with the current rather than next-best use of an asset. In other words, cost is determined by the highest-valued opportunity that must be foregone to allow current use. The cost of aluminum used in soft drink containers, for example, is determined by its value in alternative uses. Soft drink bottlers must pay an aluminum price equal to this value, or the aluminum will be used in the production of alternative goods such as airplanes, building materials, or cookware.
Similarly, if a firm owns capital equipment that can produce either product A or product B, the relevant cost of product A includes the profit of the alternative product B that cannot be produced because the equipment is tied up in manufacturing product A.
The opportunity cost concept explains asset use in a wide variety of circumstances. Gold and silver make excellent material for dental fillings. When speculation drove precious metals prices skyrocketing during the 1970s, plastic and ceramic materials became common substitutes. More recently, lower market prices have again allowed widespread dental use of both metals, but dental customers must pay a price competitive with that paid by jewelry customers and industrial users.
HISTORICAL VERSUS CURRENT COSTS
When costs are calculated for a firm's income tax returns, the law requires use of the actual dollar amount spent to purchase inputs. For tax purposes, historical cost, or actual cash outlay, is the relevant cost. Despite their usefulness, historical costs are not appropriate as a sole basis for many managerial decisions. Current cost is the amount that must be paid under prevailing market conditions. Current cost is influenced by market conditions measured by the number of buyers and sellers, the present state of technology, and inflation. For assets purchased recently, historical cost and current cost are typically the same. For assets purchased several years ago, they are often quite different. Since World War II, inflation has been an obvious source of large differences between current and historical costs. With an inflation rate of roughly 5 percent per year, prices double in less than 15 years and triple in roughly 22 years. Land purchased for $50,000 in 1970 often has a current cost in excess of $200,000.
REPLACEMENT COST
Although it is typical for current costs to exceed historical costs, this is not always the case. Computers and many types of electronic equipment cost much less today than they did just a few years ago. In many high-tech industries, the rapid advance of technology has overcome the general rate of inflation, so current costs are falling. Current costs for computers and electronic equipment are determined by replacement cost, or the cost of duplicating productive capability using current technology. For example, the value of used personal computers tends to fall by 30 to 40 percent per year. In valuing such assets, the appropriate measure is the much lower replacement costβnot the historical cost.
MARGINAL COST VERSUS INCREMENTAL COST
In discussing production costs, we must distinguish between marginal cost and incremental cost. Marginal cost refers to the change in total cost for a 1-unit change in output. For example, if total cost is $140 to produce 10 units and $150 to produce 11 units, the marginal cost of the eleventh unit is $10. Incremental cost, on the other hand, is a broader concept and refers to the change in total costs from implementing a particular management decision, such as introducing a new product line, undertaking a new advertising campaign, or a production shift.
π Definition β Marginal Cost (MC): The change in total cost resulting from a one-unit change in output. π Formula: MC = βTC/βQ β change in total cost divided by change in quantity
π Definition β Incremental Cost: The change in total costs from implementing a particular management decision (broader than marginal cost, can involve multiple units or entire projects).
SUNK COSTS
Inherent in the incremental cost concept is the principle that any cost not affected by a decision is irrelevant to that decision. A cost that does not vary across decision alternatives is called a sunk cost; such costs do not play a role in determining the optimal course of action.
π Example: Suppose a firm has spent $5,000 on an option to purchase land for a new factory at a price of $100,000. Later, it is offered an equally attractive site for $90,000. The $5,000 spent on the purchase option is a sunk cost that must be ignored, as it is not affected by available decision alternatives.
π‘ Why this matters: Sunk costs should never influence future decisions. Only costs that change across alternatives (incremental costs) are relevant for decision-making.
SHORT RUN AND LONG RUN COSTS
The short run is the operating period during which the availability of at least one input is fixed. In the long run, the firm has complete flexibility with respect to input use. In the short run, operating decisions are typically constrained by prior capital expenditures. In the long run, no such restrictions exist. At least one input is fixed in the short run while all inputs are variable in the long run.
Long-run cost curves are called planning curves; short-run cost curves are called operating curves. In the long run, plant and equipment are variable, so management can plan the most efficient physical plant. Once the optimal plant has been determined and the investment made, short-run operating decisions are constrained by these prior decisions.
FIXED AND VARIABLE COSTS
Fixed costs do not vary with output. These include interest expenses, rent on leased plant and equipment, depreciation charges associated with the passage of time, property taxes, and salaries for employees not laid off during reduced activity. Because all costs are variable in the long run, long-run fixed costs always equal zero. Variable costs fluctuate with output. Expenses for raw materials, depreciation associated with equipment use, variable utility charges, some labor costs, and sales commissions are examples of variable expenses. In the short run, both variable and fixed costs are often incurred. In the long run, all costs are variable while fixed cost is a short-run concept.
SHORT-RUN COST CURVES
A short-run cost curve shows the minimum cost impact of output changes for a specific plant size and in a given operating environment. Such curves reflect the optimal or least-cost input combination for producing output under fixed circumstances. Wage rates, interest rates, plant configuration, and all other operating conditions are held constant.
Any change in the operating environment leads to a shift in short-run cost curves. For example, a general rise in wage rates leads to an upward shift; a fall in wage rates leads to a downward shift. Such changes must not be confused with movements along a given short-run cost curve caused by a change in production levels. For an existing plant, the short-run cost curve illustrates the minimum cost of production at various output levels under current operating conditions.
SHORT-RUN COST CATEGORIES
Both fixed and variable costs affect short-run costs. Total cost at each output level is the sum of total fixed cost (a constant) and total variable cost.
Using TC for total cost, TFC for total fixed cost, TVC for total variable cost, and Q for quantity of output:
π Total Cost = TC = TFC + TVC
π Average Fixed Cost = AFC = TFC/Q
π Average Variable Cost = AVC = TVC/Q
π Average Cost = AC = TC/Q = AFC + AVC
π Marginal Cost = MC = βTC/βQ
Because fixed costs do not vary with output, fixed costs do not affect marginal costs. Only variable costs affect marginal costs. Therefore:
π Formula: MC = βTC/βQ = βTVC/βQ β marginal cost equals change in total cost or change in total variable cost following a one-unit change in output.
SHORT-RUN COST RELATIONS
Relations among short-run cost categories are shown in Figure 1. Figure 1(a) illustrates total cost and total variable cost curves. The shape of the total cost curve is determined entirely by the total variable cost curve. The slope of the total cost curve at each output level is identical to the slope of the total variable cost curve. Fixed costs merely shift the total cost curve to a higher level, meaning marginal costs are independent of fixed cost.
The shape of the total variable cost curve is determined by the productivity of variable input factors employed. The variable cost curve increases at a decreasing rate up to output level Qβ, then at an increasing rate. Assuming constant input prices, this implies that the marginal productivity of variable inputs first increases, then decreases. Variable input factors exhibit increasing returns from 0 to Qβ units and show diminishing returns thereafter. Past point Qβ, the law of diminishing returns operates, and the TVC curve faces upward (concave upwards) or rises at an increasing rate.
The relation between short-run costs and productivity is also reflected by short-run unit cost curves [Figure 1(b)]. Marginal cost declines over the range of increasing productivity and rises thereafter, giving the familiar U-shape to average variable cost and average total cost curves. Near the target output level, the marginal cost curve turns up and intersects each of the AVC and AC short-run curves at their respective minimum points.
Explaining the U-shape of AVC:
With labor as the only variable input, TVC for any output level (Q) equals the wage rate (w, assumed fixed) times the quantity of labor (L) used.
AVC = TVC/Q = w/APL
Since the average physical product of labor (APL = Q/L) usually rises first, reaches a maximum, and then falls, the AVC curve first falls, reaches a minimum, and then rises. Since AVC is U-shaped, the ATC curve is also U-shaped. The ATC curve continues to fall after the AVC curve begins to rise as long as the decline in AFC exceeds the rise in AVC.
Explaining the U-shape of MC:
MC = ΞTC/ΞQ = ΞTVC/ΞQ = w(ΞL)/ΞQ = w/MPL
Since the marginal product of labor (MPL = ΞQ/ΞL) first rises, reaches a maximum, and then falls, the MC curve first falls, reaches a minimum, and then rises. Thus, the rising portion of the MC curve reflects the operation of the law of diminishing returns.
π Example (Table 1 - Hypothetical Short-Run Costs):
| Q | TFC | TVC | TC | AFC | AVC | ATC | MC |
|---|---|---|---|---|---|---|---|
| 0 | $60 | $0 | $60 | - | - | - | - |
| 1 | $60 | $20 | $80 | $60 | $20 | $80 | $20 |
| 2 | $60 | $30 | $90 | $30 | $15 | $45 | $10 |
| 3 | $60 | $45 | $105 | $20 | $15 | $35 | $15 |
| 4 | $60 | $80 | $140 | $15 | $20 | $35 | $35 |
| 5 | $60 | $135 | $195 | $12 | $27 | $39 | $55 |
TFC are $60 regardless of output. TVC are zero when output is zero and rise as output rises. Up to point G' (point of inflection, around 1.5 units), the law of diminishing returns is not operating, and the curve rises at a decreasing rate. Past point G', the law of diminishing returns operates, and TVC rises at an increasing rate. Since TC = TFC + TVC, the TC curve has the same shape as TVC but is $60 above it at each output level.
RELATIONSHIP BETWEEN AC AND MC CURVES
The mathematical relationship is derived as follows:
d/dQ [C(Q)/Q] = [C'(Q) * Q - C(Q) * 1] / QΒ² = 1/Q [C'(Q) - C(Q)/Q] for Q > 0
- d/dQ [C(Q)/Q] > 0 when MC > AC (AC is rising)
- d/dQ [C(Q)/Q] = 0 when MC = AC (AC is at its minimum)
- d/dQ [C(Q)/Q] < 0 when MC < AC (AC is falling)
This means the marginal cost curve intersects the average cost curve at the minimum point of the average cost curve.
β Key Takeaways
The lecture provides a comprehensive framework for understanding costs in managerial economics. The critical distinction between explicit costs (actual cash outlays) and implicit costs (opportunity costs of owned resources) is fundamental, with economic decision-making requiring the use of opportunity costs rather than accounting costs. Sunk costs, being unavoidable and unaffected by current decisions, must be ignored in decision analysis. Short-run costs are divided into fixed costs (constant regardless of output) and variable costs (change with output), with marginal cost determined solely by variable costs. The U-shape of average cost curves reflects the law of diminishing returns: as output increases, average costs initially fall due to increasing returns, reach a minimum where MC = AC, then rise due to diminishing returns.
π§ Quick Revision Questions
-
What is the difference between explicit costs and implicit costs, and why must both be considered in economic decision-making?
-
If a machine was purchased for $1,000, fully depreciated over 10 years, but can now be sold for $120, what is its opportunity cost of use? Why would using zero cost be incorrect?
-
What distinguishes marginal cost from incremental cost? Provide an example where each would be the appropriate concept to use.
-
Using the data from Table 1, calculate and explain why marginal cost falls from $20 to $10 when output increases from 1 to 2 units, then rises to $55 at 5 units.
-
State the mathematical relationship between average cost and marginal cost curves. At what point do they intersect, and what does this imply about the shape of the average cost curve?
π Lecture 19 β Cost Analysis and Estimation (Continued 1) LONG-RUN COST CURVES
π Overview: This lecture explores long-run cost curves, where all inputs are variable and no fixed costs exist. It explains how long-run total, average, and marginal cost curves are derived from a firm's expansion path and examines economies and diseconomies of scale, cost elasticities, multi-plant operations, and economies of scope.
ποΈ Topics Covered
The lecture covers derivation of long-run total cost (LTC), long-run average cost (LAC), and long-run marginal cost (LMC) curves from the expansion path. It explains the relationship between short-run and long-run average cost curves through the envelope concept, explores economies and diseconomies of scale including technological and financial reasons, examines cost elasticity and its relation to scale economies, discusses multi-plant economies and diseconomies with a numerical example, and concludes with economies of scope and their strategic importance.
π Lecture Summary
Long-Run Total Cost Curves
The long run is the time period during which all inputs are variable, meaning the firm faces no fixed costs. The length of the long run varies by industryβfrom a few months in service industries like dry cleaning to many years in capital-intensive industries like electricity generation.
The firm's long-run total cost (LTC) curve is derived from the firm's expansion path and shows the minimum long-run total costs of producing various levels of output. The expansion path shows optimal input combinations for each output level. For example, point A shows that to produce 1 unit of output (1Q), the firm uses 4 units of labor (4L) and 4 units of capital (4K). With wage (w) = $10 per unit and rental price of capital (r) = $10 per unit, the minimum total cost is:
π Expansion Path: The locus of optimal input combinations to produce various levels of output. π Formula: LTC = wL + rK β Total cost equals wage rate times labor plus rental rate times capital π Example: (4L)($10) + (4K)($10) = $80 for producing 1Q at point A'
The LTC curve starts at the origin because there are no fixed costs in the long run. From the LTC curve, we derive the long-run average cost (LAC) curve by dividing LTC by Q (LAC = LTC/Q). The long-run marginal cost (LMC) curve measures the change in LTC per unit change in output and is given by the slope of the LTC curve (LMC = βLTC/βQ).
π‘ Why this matters: Long-run cost curves reveal the nature of economies or diseconomies of scale and optimal plant sizes, serving as helpful guides to planning decisions. Unlike short-run curves based on diminishing returns, the U-shape of LAC depends on increasing, constant, and decreasing returns to scale.
Long-Run Average and Marginal Cost Curves
The LAC curve shows the lowest average cost of producing each level of output when the firm can build the most appropriate plant size. The top panel of Figure 2 assumes the firm can build only four scales of plant (SACβ, SACβ, SACβ, SACβ), while the bottom panel assumes many more or infinite plant scales.
With four plant scales:
- To produce 1Q: minimum AC = $80 at point A" using SACβ
- To produce 1.5Q: AC = $70 at point B* using SACβ or SACβ
- To produce 2Q: AC = $50 at point C" using SACβ
- To produce 3Q: AC = $60 at point E* using SACβ or SACβ
- To produce 4Q: AC = $30 at point G" using SACβ (lowest point on SACβ)
- To produce 5Q: AC = $60 at point J* using SACβ or SACβ
- To produce 6Q: AC = $50 at point R" using SACβ
As the number of plant scales approaches infinity, the LAC curve becomes smooth and represents the envelope curve tangent to all SAC curves. Only at point G" (lowest point on LAC) does the firm utilize the optimal scale of plant at its lowest point.
π Envelope Curve: The LAC curve that is tangent to all possible SAC curves, showing minimum average cost for each output level when any scale of plant can be built.
Relationship Between Production and Cost
The cost function is simply the production function expressed in monetary rather than physical units, assuming the firm is a "price taker" in input markets. When input prices are constant, a direct relation exists between long-run total cost and production functions.
A production function with first increasing then decreasing returns to scale implies a cubic cost function where:
- Costs increase less than proportionately with output over the range of increasing returns
- Costs increase more than proportionately after decreasing returns set in
π Cost Function: The production function expressed in monetary terms, showing the minimum cost of producing each output level given constant input prices.
Minimum Efficient Scale
Minimum efficient scale (MES) is the output level at which long-run average costs are minimized. MES occurs at the minimum point on a U-shaped LAC curve (output Q = 4 in Figure 2) and at the corner of an L-shaped LAC curve.
π Minimum Efficient Scale (MES): The output level where long-run average costs are first minimized.
π‘ Why this matters: Competition is vigorous when MES is low relative to total industry demand due to low barriers to entry. Competition is less vigorous when MES is large relative to total industry output because barriers to entry tend to be high, limiting potential competitors.
Economies of Scale
Economies of scale exist when long-run average costs decline as output expands. These arise from:
- Labor specialization: Workers perform specific tasks, increasing proficiency
- Technical factors: Specialized equipment use; equipment productivity often increases with size faster than cost (e.g., a 500,000-kilowatt generator costs less than two 250,000-kilowatt generators)
- Financial factors: Large firms access capital markets at lower rates
Diseconomies of scale occur when average costs rise at high output levels due to:
- Management coordination limitations
- Staff overhead growing more than proportionately with output
π Economies of Scale: Situation where output grows proportionately faster than inputs, leading to lower costs per unit with constant input prices (declining LAC curve). π Diseconomies of Scale: Situation where output grows proportionately slower than inputs, leading to higher costs per unit (rising LAC curve).
Increasing returns to scale (decreasing costs) arise from technological reasons (division of labor, specialization, productive machinery) and financial reasons (quantity discounts, favorable bond/stock sales, lower interest rates, advertising economies).
Decreasing returns to scale arise primarily from management difficultiesβincreased meetings, paperwork, and coordination challenges as scale increases.
Cost Elasticities and Economies of Scale
Cost elasticity (Ξ΅C) measures the percentage change in total cost associated with a 1 percent change in output.
π Formula: Ξ΅C = (βTC/TC) Γ· (βQ/Q) = (βTC/βQ) Γ (Q/TC)
π Cost Elasticity: The percentage change in total cost resulting from a 1% change in output.
Relationship between cost elasticity and economies of scale:
- Ξ΅C < 1: Economies of scale (decreasing AC) β costs increase slower than output
- Ξ΅C = 1: No economies of scale (constant AC)
- Ξ΅C > 1: Diseconomies of scale (increasing AC)
π Example: If Ξ΅C = 0.8, a 10% increase in output leads to only an 8% increase in total cost, implying economies of scale.
π‘ Why this matters: An inverse relation holds between average costs and scale economies. While Ξ΅C < 1 implies falling AC and economies of scale (costs increase slower than output), an output elasticity Ξ΅Q > 1 implies increasing returns to scale (output increases faster than input usage).
Firm Size and Plant Size
The cost function for a multi-plant firm can be the sum of cost functions for individual plants, but can also be greater or less. It is important to distinguish between:
- Intra-plant economies: Economies arising within production facilities
- Multi-plant economies: Economies arising between and among plants
Multi-Plant Economies and Diseconomies of Scale
Multi-plant economies of scale are cost advantages from operating multiple facilities in the same industry. Multi-plant diseconomies of scale are cost disadvantages from managing multiple facilities.
Three possible shapes for the firm's long-run average cost curve with multiple plants:
- L-shaped (Figure 5a): No economies or diseconomies from combining plants
- Continuously declining (Figure 5b): Multi-plant firms are more efficient due to central billing, common purchasing, centralized management
- First declining then rising (Figure 5c): Multi-plant economies dominate initially, but coordination costs eventually weigh down
Numerical Example - Electronics Company XYZ: Given: P = 940 β 0.02Q, TC = 250,000 + 40Q + 0.01QΒ²
Single-plant profit maximization:
- MR = 940 β 0.04Q, MC = 40 + 0.02Q
- MR = MC: 940 β 0.04Q = 40 + 0.02Q β 0.06Q = 900 β Q = 15,000
- P = 940 β 0.02(15,000) = $640
- Ο = $6,500,000
AC-minimizing activity level per plant:
- Set MC = AC: 40 + 0.02Q = 250,000/Q + 40 + 0.01Q
- 0.01QΒ² = 250,000 β Q = 5,000 per plant
- Optimal single-plant approach: 15,000/5,000 = 3 plants
Multi-plant analysis:
- At Q = 5,000: MC = 40 + 0.02(5,000) = $140
- MR = MC: 940 β 0.04Q = 140 β Q = 20,000
- Optimal plants: 20,000/5,000 = 4 plants
- P = 940 β 0.02(20,000) = $540
- Ο = $8,000,000
The multi-plant approach yields higher profit ($8 million vs $6.5 million).
Economies of Scope
Economies of scope exist when the cost of joint production is less than the cost of producing multiple outputs separately. This concept explains why firms typically produce multiple products.
π Economies of Scope: The lowering of costs that a firm experiences when it produces two or more products together rather than each alone.
Examples:
- A commuter airline extending into cargo services
- A firm producing a second product to use by-products from the first product
- PepsiCo broadening from soft drinks to include cookies, snack foods, and various beverages
π‘ Why this matters: Economies of scope permit a firm to translate superior skill in a given product line into unique advantages in complementary products. Effective competitive strategy emphasizes developing product lines related to a firm's current areas of strength.
Economies of scale must be distinguished from economies of scopeβscale refers to cost advantages from producing more of a single product, while scope refers to cost advantages from producing multiple products together.
β Key Takeaways
Long-run cost curves show minimum costs when all inputs are variable, with the LAC curve serving as an envelope to all possible SAC curves. Economies of scale cause declining LAC through labor specialization, technical factors, and financial advantages, while diseconomies arise from management coordination problems. Cost elasticity (Ξ΅C) directly measures scale economiesβvalues less than 1 indicate economies, equal to 1 indicates constant returns, and greater than 1 indicates diseconomies. Multi-plant operations can yield higher profits than single-plant operations when each plant operates at minimum efficient scale, as demonstrated by the XYZ numerical example where multi-plant production increased profit from $6.5M to $8M. Economies of scope explain why firms produce multiple products jointly rather than separately, forming the basis for strategic product line extension.
π§ Quick Revision Questions
- How is the long-run average cost curve derived from the long-run total cost curve, and why does it start at the origin?
- What are the three main sources of economies of scale, and what primarily causes diseconomies of scale?
- Using the cost elasticity formula, explain the relationship between Ξ΅C values and economies/diseconomies of scale.
- In the XYZ Electronics example, what was the profit advantage of multi-plant production over single-plant production, and why?
- How do economies of scope differ from economies of scale, and what strategic implications do they have for firms?
π Lecture 20 β Cost Analysis and Estimation (Continued 2)
π Overview: This lecture continues the examination of cost analysis by introducing Cost-Volume-Profit (Breakeven) Analysis, a critical tool for understanding the relationship between costs, revenues, and profits at different output levels. It also covers the Degree of Operating Leverage and the Learning Curve concept, explaining how firms can gain competitive advantages through production experience and fixed-cost structures. These concepts are essential for managerial decision-making regarding pricing, production planning, and strategic positioning.
ποΈ Topics Covered
This lecture covers Cost-Volume-Profit Analysis including its graphic and algebraic methods for determining breakeven points and target profits, the Degree of Operating Leverage which measures the sensitivity of profits to changes in output and the risk-return trade-off of fixed versus variable costs, and the Learning Curve concept which explains how average costs decline as cumulative total output increases due to production experience and improved efficiency, along with its strategic implications for pricing and market dominance.
π Lecture Summary
Cost-Volume-Profit Analysis
Cost-volume-profit analysis, sometimes called breakeven analysis, is an important analytical technique used to study relations among costs, revenues, and profits. Both graphic and algebraic methods are employed. For simple problems, simple graphic methods work best. In more complex situations, analytic methods, possibly involving spreadsheet software programs, are preferable.
Cost-Volume-Profit Charts
A basic cost-volume-profit chart is composed of a firm's total cost and total revenue curves. Volume of output is measured on the horizontal axis; revenue and cost are shown on the vertical axis. Fixed costs are constant regardless of the output produced and are indicated by a horizontal line. Variable costs at each output level are measured by the distance between the total cost curve and the constant fixed costs. The total revenue curve indicates the price/demand relation for the firm's product; profits or losses at each output are shown by the distance between total revenue and total cost curves. Below the breakeven point, found at the intersection of the total revenue and total cost lines, the firm suffers losses. Beyond that point, it begins to make profits.
In the example depicted in Figure 1, fixed costs of $60,000 are represented by a horizontal line. Variable costs for labor and materials are $1.80 per unit, so total costs rise by that amount for each additional unit of output. Total revenue based on a price of $3 per unit is a straight line through the origin. The slope of the total revenue line is steeper than that of the total cost line. Figure 1 indicates a breakeven point at a sales and cost level of $150,000, which occurs at a production level of 50,000 units.
The cost-volume-profit or breakeven chart is a flexible tool to quickly analyze the effect of changing conditions on the firm. For example, an increase in the price of the commodity can be shown by increasing the slope of the TR curve, an increase in total fixed costs of the firm can be shown by an increase in the vertical intercept of the TC curve, and an increase in average variable costs by an increase in the slope of the TC curve.
Although cost-volume-profit charts can be used to portray profit/output relations, algebraic techniques are typically more efficient for analyzing decision problems. The algebra of cost-volume-profit analysis can be illustrated as follows.
Let:
- P = Price per unit sold
- Q = Quantity produced and sold
- TFC = Total fixed costs
- AVC = Average variable cost
On a per-unit basis, profit contribution equals price minus average variable cost (ΟC = P β AVC). Profit contribution can be applied to cover fixed costs and then to provide profits. It is the foundation of cost-volume-profit analysis.
One useful application of cost-volume-profit analysis lies in the determination of breakeven activity levels. A breakeven quantity is a zero profit activity level. At breakeven quantity levels, total revenue (P * Q) exactly equals total costs (TFC + AVC * Q).
Total revenue is equal to the selling price (P) per unit times the quantity of output or sales (Q): π Formula: TR = (P)(Q)
Total costs equal total fixed costs plus total variable costs (TVC). Since TVC is equal to the average (per-unit) variable costs (AVC) times the quantity of output or sales: π Formula: TC = TFC + (AVC)(Q)
Setting total revenue equal to total costs and substituting QB (the breakeven output) for Q: π Formula: (P)(QB) = TFC + (AVC)(QB)
Solving for the breakeven output, QB: π Formula: QB = TFC / (P - AVC) π Example: With TFC = $200, P = $10, and AVC = $5: QB = $200 / ($10 - $5) = 40 units
The denominator in the formula (P - AVC) is called the contribution margin per unit because it represents the portion of the selling price that can be applied to cover the fixed costs of the firm and to provide for profits.
More generally, suppose that the firm wishes to earn a specific profit and wants to estimate the target output (QT) at which a target profit (ΟT) can be achieved. To do so, we simply add ΟT to the numerator of the breakeven formula: π Formula: QT = (TFC + ΟT) / (P - AVC) π Example: If the firm wanted to earn a target profit of $100: QT = ($200 + $100) / ($10 - $5) = $300 / $5 = 60 units TR = ($10)(60) = $600, TC = $200 + ($5)(60) = $500, and ΟT = $600 - $500 = $100.
π‘ Why this matters: While linear cost-volume-profit charts and analysis are frequently used, care must be exercised to apply them only when the assumption of constant prices and average variable costs holds. The analysis also assumes that the firm produces a single product or a constant mix of products.
Degree of Operating Leverage
Operating leverage refers to the ratio of the firm's total fixed costs to total variable costs. The higher is this ratio, the more leveraged the firm is said to be. As the firm becomes more automated or more leveraged (i.e., substitutes fixed for variable costs), its total fixed costs rise but its average variable costs fall. Because of higher overhead costs, the breakeven output of the firm increases.
The degree of operating leverage (DOL) is the percentage change in profit from a 1 unit change in units sold: π Formula: DOL = %ΞΟ / %ΞQ = (ΞΟ/Ο) / (ΞQ/Q) = (ΞΟ/ΞQ) * (Q/Ο)
Since Ο = Q(P - AVC) - TFC and ΞΟ = ΞQ(P - AVC), substituting these values: π Formula: DOL = ΞQ(P - AVC) * Q / [ΞQ[Q(P - AVC) - TFC]] = Q(P - AVC) / [Q(P - AVC) - TFC]
The numerator is the total contribution to fixed costs and profits of all units sold by the firm, and the denominator is total (economic) profit.
In terms of calculus: DOL = (βΟ/βQ) * (Q/Ο)
π Example: For an increase in output from 60 to 70 units with TC: DOL = 60($10 - $5) / [60($10 - $5) - $200] = $300 / $100 = 3
With TC' (when the firm becomes more leveraged), the degree of operating leverage becomes: DOL' = 60($10 - $3.33) / [60($10 - $3.33) - $300] = $400 / $100 = 4
Thus, the degree of operating leverage (DOL) increases as the firm becomes more leveraged or capital intensive. It is also higher the closer we are to the breakeven point because the base in measuring the percentage change in profits (the denominator) is close to zero near the breakeven point.
π‘ Why this matters: When the firm's sales and output are high, the firm makes larger profits when it is more leveraged (i.e., with TC'). But it also incurs losses sooner and these losses rise more rapidly than when the firm is less highly leveraged (i.e., with TC). The larger profits of the more highly leveraged firm when output is high can thus be regarded as the return for its greater risk.
Learning Curves
For many manufacturing processes, average costs decline substantially as cumulative total output increases. Improvements in the use of production equipment and procedures are important in this process, as are reduced waste from defects and decreased labor requirements as workers become more proficient in their jobs.
Learning Curve Concept
When knowledge gained from manufacturing experience is used to improve production methods, the resulting decline in average costs is said to reflect the effects of the firm's learning curve. The learning curve or experience curve phenomenon affects average costs in a way similar to that for any technical advance that improves productive efficiency. Both involve a downward shift in the long-run average cost curve at all levels of output. Learning through production experience permits the firm to produce output more efficiently at each and every output level.
To isolate the effect of learning or experience on average cost, it is necessary to identify carefully that portion of average-cost changes over time that is due to other factors. One of the most important of these changes is the effect of economies of scale. The change in average costs experienced between periods can reflect the effects of both learning and economies of scale.
π Definition β Scale economies: Cost differences associated with different output levels along a single LRAC curve. π Definition β Learning curves: Cost differences related to total cumulative output, measured by shifts in LRAC curves over time.
The learning curve shows the decline in the average input cost of production with rising cumulative total outputs over time. For example, it might take 1,000 hours to assemble the 100th aircraft, but only 700 hours to assemble the 200th aircraft because managers and workers become more efficient as they gain production experience.
Strategic Implications of the Learning Curve Concept
The rule used for representing the learning curve effect states that the more times a task has been performed, the less time will be required on each subsequent iteration. This relationship was first quantified in 1936 at Wright-Patterson Air Force Base, where it was determined that every time total aircraft production doubled, the required labor time decreased by 10 to 15 percent. Learning curve theory states that as the quantity of items produced doubles, costs decrease at a predictable rate.
π Formula: Learning Rate = [1 β AC2/AC1] * 100 π Example: If the AC/unit for a new product were $100 during 2004 but fell to $90 during 2005: Learning Rate = [1 β 90/100] * 100 = 10% As cumulative total output doubles, average cost is expected to fall by 10%.
A classic example illustrating the successful use of the learning curve concept is Texas Instruments (TI). TI made the decision to price its semiconductors well below then-current production costs, given expected learning curve advantages in the 20 percent range. With low prices, volume increased dramatically. Because TI was making so many chips, average costs were even lower than anticipated; it could price below the competition; and dozens of competitors were knocked out of the world market.
The learning curve can be expressed algebraically as follows: π Formula: C = aQ^b Where C is the average input cost of the Qth unit of output, a is the average cost of the first unit of output, and b will be negative because the average input cost declines with increases in cumulative total output. The greater the absolute value of b, the faster average input cost declines.
Taking the logarithm of both sides: π Formula: log C = log a + b log Q In this logarithmic form, b is the slope of the learning curve.
π Example: Suppose regression analysis gives: log C = 3 - 0.3 log Q For the 100th unit: log C = 3 - 0.3(2) = 2.4, so C = $251.19 For the 200th unit: log C = 3 - 0.3(2.30103) = 2.309691, so C = $204.03 For the 400th unit: C = $165.72
π‘ Why this matters: Learning curves have been documented in many manufacturing and service sectors. They have been used to forecast needs for personnel, machinery, and raw materials, for scheduling production, determining the price at which to sell output, and even for evaluating suppliers' price quotations. How rapidly the learning curve declines can differ widely among firms and is greater the smaller the rate of employee turnover, the fewer the production interruptions, and the greater the ability of the firm to transfer knowledge from the production of other similar products.
β Key Takeaways
Cost-Volume-Profit or breakeven analysis is a fundamental tool for determining the output level at which total revenue equals total costs (zero profit), calculated as QB = TFC / (P - AVC), and can be extended to find the target output for a desired profit level. The Degree of Operating Leverage (DOL = Q(P - AVC) / [Q(P - AVC) - TFC]) measures the sensitivity of profit to output changes, increases with higher fixed-cost ratios, and represents a risk-return trade-off where more leveraged firms earn higher profits at high output levels but incur losses sooner. The Learning Curve concept shows that average costs decline predictably as cumulative total output doubles, with the learning rate calculated as [1 - AC2/AC1] * 100, and is distinct from economies of scale. The learning curve is algebraically expressed as C = aQ^b, where b is negative, and can be estimated using regression analysis on log-transformed data. Strategically, firms can use learning curve advantages to price aggressively below current costs, gain market share, and achieve dominant positions, as demonstrated by Texas Instruments in the semiconductor industry.
π§ Quick Revision Questions
- What is the formula for calculating the breakeven quantity (QB), and what does each variable represent?
- How does an increase in fixed costs affect the breakeven point on a cost-volume-profit chart?
- A firm has TFC = $500, P = $25, and AVC = $15. What is its breakeven output, and what output is needed to achieve a target profit of $200?
- If a firm's DOL is 4 at 60 units of output, what does this number imply about the relationship between a percentage change in sales and the resulting percentage change in profit?
- Explain the difference between learning curves and economies of scale. How does the learning rate formula work, and what does a 20% learning rate mean for average costs when cumulative output doubles?