📘 Lecture 36 — Pricing with Market Power (Continued)
📖 Overview: This lecture continues the exploration of pricing strategies under market power, examining airline fare discrimination through market separation based on elasticity. It introduces intertemporal price discrimination and peak-load pricing as methods to segment demand over time, and provides a detailed analysis of the two-part tariff pricing strategy, including how to set entry and usage fees across different consumer types.
🗂️ Topics Covered
The lecture covers airline fare discrimination based on demand elasticity differences between business and casual travelers. It explains intertemporal price discrimination, where firms initially charge high prices to inelastic demand and later lower prices for the mass market, and peak-load pricing, where prices rise during periods of high demand due to capacity constraints. The final and most detailed section introduces the two-part tariff, examining how to set entry fees and usage fees for a single consumer, two consumers, and many different consumers, including a rule of thumb for optimal pricing.
📝 Lecture Summary
AIRLINE FARES
Differences in elasticities imply that some customers will pay a higher fare than others. Business travelers have few choices and their demand is less elastic. Casual travelers have choices and are more price sensitive.
Elasticities of Demand for Air Travel:
| Elasticity | First-Class | Economy | Plus Economy |
|---|---|---|---|
| Price | -0.3 | -0.4 | -0.9 |
| Income | 1.2 | 1.2 | 1.8 |
The airlines separate the market by setting various restrictions on the tickets:
- Less expensive: notice, stay over the weekend, no refund
- Most expensive: no restrictions
INTERTEMPORAL PRICE DISCRIMINATION AND PEAK-LOAD PRICING
SEPARATING THE MARKET WITH TIME Initial release of a product, the demand is inelastic:
- Book
- Movie
- Computer
Once this market has yielded a maximum profit, firms lower the price to appeal to a general market with a more elastic demand:
- Paper back books
- Dollar Movies
- Discount computers
The graph illustrates that consumers are divided into groups over time. Initially, demand is less elastic (D1 = AR1), resulting in a price of P1. Over time, demand becomes more elastic (D2 = AR2), and price is reduced to P2 to appeal to the mass market.
PEAK-LOAD PRICING Demand for some products may peak at particular times:
- Rush hour traffic
- Electricity - summer season
- Restaurants on weekends
Capacity restraints will also increase MC. Increased MR and MC would indicate a higher price. MR is not equal for each market because one market does not impact the other market.
The graph shows peak-load price = P1 (from D1 = AR1 and MR1) and off-load price = P2 (from D2 = AR2 and MR2), with MC constant.
HOW TO PRICE A BEST SELLING NOVEL What Do You Think?
- How would you arrive at the price for the initial release of the hardbound edition of a book?
- How long do you wait to release the paperback edition? Could the popularity of the book impact your decision?
- How do you determine the price for the paperback edition?
THE TWO-PART TARIFF
The purchase of some products and services can be separated into two decisions, and therefore, two prices.
Examples:
- Amusement Park: Pay to enter, Pay for rides and food within the park
- Tennis Club: Pay to join, Pay to play
- Safety Razor: Pay for razor, Pay for blades
- Polaroid Film: Pay for the camera, Pay for the film
Pricing decision is setting the entry fee (T) and the usage fee (P). Choosing the trade-off between free-entry and high use prices or high-entry and zero use prices.
TWO-PART TARIFF WITH A SINGLE CONSUMER Usage price P* is set where MC = D. Entry price T* is equal to the entire consumer surplus.
📐 Formula: T* = entire consumer surplus; P* = MC
📌 Example: For a single consumer, the firm charges a usage fee P* equal to marginal cost, and an entry fee T* equal to the entire consumer surplus area under the demand curve above P*. This extracts all consumer surplus as profit.
TWO-PART TARIFF WITH TWO CONSUMERS The price, P*, will be greater than MC. Set T* at the surplus value of D2 (the lower demand consumer).
📐 Formula: π = 2T* + (P* - MC) × (Q1 + Q2) π more than twice ABC
🔑 Definition — Two-part tariff with two consumers: The entry fee T* is set equal to the consumer surplus of the consumer with the lower demand (D2), while the usage fee P* is set above MC. The firm earns profit from both the entry fee and the usage fee from both consumers.
THE TWO-PART TARIFF WITH MANY DIFFERENT CONSUMERS No exact way to determine P* and T*. Must consider the trade-off between the entry fee T* and the use fee P*.
- Low entry fee: High sales and falling profit with lower price and more entrants.
To find optimum combination, choose several combinations of P,T. Choose the combination that maximizes profit.
📐 Formula: π = πa + πs = n(T)T + (P - MC)Q(n) where n = entrants
Total profit is the sum of the profit from the entry fee (πa) and the profit from sales (πs). Both depend on T.
The graph shows total profit (π Total) as the sum of entry fee profit (πa) and sales profit (πs), with T* at the optimal entry fee that maximizes total profit.
💡 Why this matters: Finding the optimal two-part tariff requires balancing the trade-off between a high entry fee (which reduces the number of entrants) and a low usage fee (which increases sales volume).
RULE OF THUMB
- Similar demand: Choose P close to MC and high T
- Dissimilar demand: Choose high P and low T
TWO-PART TARIFF WITH A TWIST Entry price (T) entitles the buyer to a certain number of free units:
- Razors with several blades
- Amusement parks with some tokens
- On-line with free time
⭐ Key Takeaways
Airlines use price discrimination by imposing ticket restrictions, separating business travelers (inelastic demand, -0.3 to -0.4) from casual travelers (elastic demand, -0.9). Intertemporal price discrimination involves charging a high initial price for inelastic demand (e.g., hardcover books) and later lowering the price for the mass market (e.g., paperbacks). Peak-load pricing raises prices during high-demand periods when capacity constraints increase marginal cost. The two-part tariff separates payment into an entry fee (T) and a usage fee (P); for a single consumer, set P = MC and T = entire consumer surplus; for two consumers, set P above MC and T equal to the surplus of the lower-demand consumer; for many different consumers, the optimal combination of P and T must be found by maximizing total profit, with the rule of thumb being similar demand → high T/ low P, and dissimilar demand → low T/ high P.
🧠 Quick Revision Questions
- Why do airlines charge higher fares to business travelers than to casual travelers, and how do they enforce this separation?
- Explain the difference between intertemporal price discrimination and peak-load pricing, providing an example of each.
- In a two-part tariff with a single consumer, what is the optimal usage fee (P*) and entry fee (T*), and why?
- For a two-part tariff with two consumers, how is the entry fee T* determined, and what is the profit formula?
- What is the rule of thumb for setting entry and usage fees when consumers have similar demand versus when they have dissimilar demand?
📘 Lecture 37 — PRICING WITH MARKET POWER (Continued)
📖 Overview: This lecture explores bundling as a pricing strategy for firms with market power. It explains the conditions necessary for successful bundling, demonstrates its profitability using a movie leasing example, and analyzes consumer behavior and firm profit under different scenarios of demand correlation.
🗂️ Topics Covered
This lecture covers the definition of bundling and the necessary conditions for its use. It presents a detailed example of leasing two movies, analyzing revenue under separate selling versus bundling with both negatively and positively correlated demands. The lecture then extends the analysis to a scenario with many consumers, using reservation price graphs to illustrate consumption decisions when goods are sold separately versus bundled, and explains the critical role of negative demand correlation.
📝 Lecture Summary
BUNDLING
Bundling is packaging two or more products to gain a pricing advantage.
💡 Why this matters: Bundling allows a firm to extract more consumer surplus than selling items separately when customers have different valuations for the individual products.
CONDITIONS NECESSARY FOR BUNDLING
- Heterogeneous customers
- Price discrimination is not possible
- Demands must be negatively correlated
AN EXAMPLE: LEASING MOVIE X & MOVIE Y
The reservation prices for each theater and movie are:
| Movie X | Movie Y | |
|---|---|---|
| Theater A | $12,000 | $3,000 |
| Theater B | $10,000 | $4,000 |
Renting the movies separately would result in each theater paying the lowest reservation price for each movie:
- Maximum price for X = $10,000 (Theater B's reservation price)
- Maximum price for Y = $3,000 (Theater A's reservation price)
- Total Revenue = $10,000 + $3,000 = $13,000
If the movies are bundled:
- Theater A will pay $15,000 for both ($12,000 + $3,000)
- Theater B will pay $14,000 for both ($10,000 + $4,000) If each were charged the lower of the two prices, total revenue will be $28,000 ($14,000 x 2).
Relative Valuations: Negative Correlated: Profitable to Bundle
- A pays more for X ($12,000) than B ($10,000).
- B pays more for Y ($4,000) than A ($3,000).
If the demands were positively correlated (Theater A would pay more for both films as shown), bundling would not result in an increase in revenue.
| Movie X | Movie Y | |
|---|---|---|
| Theater A | $12,000 | $4,000 |
| Theater B | $10,000 | $3,000 |
If the movies are bundled:
- Theater A will pay $16,000 for both
- Theater B will pay $13,000 for both If each were charged the lower of the two prices, total revenue will be $26,000, the same as by selling the films separately.
BUNDLING SCENARIO: TWO DIFFERENT GOODS AND MANY CONSUMERS
Many consumers with different reservation price combinations for two goods. The reservation price for good 1 (r₁) and good 2 (r₂) vary across consumers (e.g., Consumer A is willing to pay up to $3.25 for good 1 and up to $6 for good 2).
CONSUMPTION DECISIONS WHEN PRODUCTS ARE SOLD SEPARATELY
When goods are sold separately at prices P₁ and P₂, consumers fall into four categories based on their reservation prices:
- Region I: r₁ > P₁ and r₂ > P₂ → Consumers buy both goods
- Region II: r₁ < P₁ and r₂ > P₂ → Consumers buy only good 2
- Region III: r₁ < P₁ and r₂ < P₂ → Consumers buy nothing
- Region IV: r₁ > P₁ and r₂ < P₂ → Consumers buy only good 1
CONSUMPTION DECISIONS WHEN PRODUCTS ARE BUNDLED
When products are bundled at price P_B, consumers buy the bundle when r₁ + r₂ > P_B. The dividing line is r₂ = P_B - r₁.
- Region 1: r > P_B → Consumers buy the bundle
- Region 2: r < P_B → Consumers do not buy the bundle
The effectiveness of bundling depends upon the degree of negative correlation between the two demands.
RESERVATION PRICES (Demand Correlation)
- If the demands are perfectly positively correlated, the firm will not gain by bundling. It would earn the same profit by selling the goods separately.
- If the demands are perfectly negatively correlated, bundling is the ideal strategy — all the consumer surplus can be extracted and a higher profit results.
In the movie example, bundling pays due to negative correlation between Theater A's high valuation for Movie X and low valuation for Movie Y, and Theater B's opposite pattern.
⭐ Key Takeaways
Bundling is a profitable pricing strategy when customers have heterogeneous valuations, price discrimination is not feasible, and demands are negatively correlated. With negative correlation, customers who value one good highly value the other less, allowing the firm to capture more surplus through a single bundle price. When demands are positively correlated, bundling yields no revenue gain over separate selling. The effectiveness of bundling depends directly on the degree of negative correlation — perfect negative correlation allows extraction of all consumer surplus. The reservation price model with many consumers shows that bundling changes consumption decisions by grouping customers based on the sum of their reservation prices rather than individual prices.
🧠 Quick Revision Questions
- What three conditions are necessary for bundling to be a profitable pricing strategy?
- In the movie example with Theater A ($12,000 for X, $3,000 for Y) and Theater B ($10,000 for X, $4,000 for Y), why does bundling generate higher revenue ($28,000) than selling separately ($13,000)?
- Explain why positively correlated demands make bundling ineffective.
- In the two-good, many-consumer model, what is the decision rule for a consumer to buy a bundle?
- What type of demand correlation makes bundling an "ideal strategy" that extracts all consumer surplus?
📘 Lecture 38 — PRICING WITH MARKET POWER (Continued)
📖 Overview: This lecture explores advanced pricing strategies involving bundling—the practice of selling products together—and advertising decisions. It examines how firms can increase profits through mixed versus pure bundling, especially when marginal costs are positive, and develops a rule of thumb for optimal advertising expenditure based on elasticities.
🗂️ Topics Covered
The lecture covers types of bundling (mixed vs. pure), analysis of bundling scenarios with positive and zero marginal costs, practical applications of bundling in industries like automobiles and cable television, tying practices, and the economics of advertising including its effects on demand curves and the advertising-to-sales ratio rule of thumb.
📝 Lecture Summary
TYPES OF BUNDLING
There are two main types of bundling. Mixed bundling involves selling goods both as a bundle and separately. Pure bundling involves selling only a package and not offering individual items. Each strategy has different profit implications depending on consumer reservation prices and costs.
🔑 Definition — Mixed bundling: Selling products both as a package and individually to different consumers. 🔑 Definition — Pure bundling: Selling products only as a complete package, not separately.
MIXED VERSUS PURE BUNDLING
With positive marginal costs, mixed bundling may be more profitable than pure bundling. Consider a diagram with two goods: C₁ = MC₁ = $20 and C₂ = MC₂ = $30. Consumer A has a reservation price for good 1 that is below marginal cost c₁, while consumer D has a reservation price for good 2 below c₂. With mixed bundling, consumer A is induced to buy only good 2, and consumer D is induced to buy only good 1, reducing the firm's costs.
💡 Why this matters: When reservation prices are below marginal cost for some consumers, mixed bundling allows the firm to avoid selling at a loss by letting those consumers buy only the good for which their reservation price exceeds marginal cost. This reduces costs compared to pure bundling where everyone buys both goods.
MIXED VS. PURE BUNDLING: SCENARIO
Perfect negative correlation exists between reservation prices. There are significant marginal costs for both goods. The key observation is that when a consumer's reservation price is below marginal cost for one good, mixed bundling induces that consumer to buy only the good for which their reservation price exceeds marginal cost.
BUNDLING EXAMPLE
Consider four consumers (A, B, C, D) with the following reservation prices, and costs C₁ = $20, C₂ = $30:
| Strategy | P₁ | P₂ | P_B | Profit |
|---|---|---|---|---|
| Sell separately | $50 | $90 | --- | $150 |
| Pure bundling | --- | --- | $100 | $200 |
| Mixed bundling | $89.95 | $89.95 | $100 | $229.90 |
Sell separately calculation: 3($50 - $20) + 1($90 - $30) = 3($30) + 1($60) = $90 + $60 = $150. Consumers B, C, and D buy good 1; consumer A buys good 2.
Pure bundling calculation: 4($100 - $20 - $30) = 4($50) = $200. All four consumers buy the bundle.
Mixed bundling calculation: ($89.95 - $20) + ($89.95 - $30) + 2($100 - $20 - $30) = $69.95 + $59.95 + 2($50) = $69.95 + $59.95 + $100 = $229.90. Consumer D buys good 1 only, consumer A buys good 2 only, and consumers B and C buy the bundle.
📌 Example: The profit comparison shows mixed bundling ($229.90) > pure bundling ($200) > sell separately ($150). Mixed bundling is most profitable because it captures consumer surplus from all types while avoiding selling goods below marginal cost.
MIXED BUNDLING WITH ZERO MARGINAL COSTS
Question: If MC = 0, would mixed bundling still be the most profitable strategy with perfect negative correlation?
In this example, consumers B and C are willing to pay $20 more for the bundle than consumers A and D. With mixed bundling, the bundle price can be increased to $120, while A and D can be charged $90 for a single good.
| Strategy | P₁ | P₂ | P_B | Profit |
|---|---|---|---|---|
| Sell separately | $80 | $80 | --- | $320 |
| Pure bundling | --- | --- | $100 | $400 |
| Mixed bundling | $90 | $90 | $120 | $420 |
Mixed bundling still yields the highest profit ($420 > $400 > $320), even with zero marginal costs. The advantage comes from price discriminating—charging high-reservation consumers more for the bundle while still capturing low-reservation consumers with individual goods.
BUNDLING IN PRACTICE
Bundling is widely used in real-world markets:
- Automobile option packages (e.g., "luxury packages" that bundle multiple features)
- Vacation travel (bundling flights, hotels, car rentals)
- Cable television (channel packages at different price tiers)
Mixed Bundling in Practice involves:
- Using market surveys to determine consumers' reservation prices for various goods
- Designing a pricing strategy from the survey results
The lecture shows a scatter plot of estimated reservation prices from a representative sample. The firm first chooses a bundle price P_B, then tries individual prices P₁ and P₂ until total profit is roughly maximized.
The Complete Dinner vs. a la Carte: A Restaurant's Pricing Problem illustrates how pricing must match consumer preferences for various selections. Mixed bundling allows the customer to get maximum utility from a given expenditure by allowing a greater number of choices.
BUNDLING: TYING
Tying is a practice of requiring a customer to purchase one good in order to purchase another.
Examples:
- Xerox machines and the paper—customers who bought Xerox machines had to use Xerox paper
- IBM mainframe and computer cards—IBM required proprietary cards for their mainframes
- McDonald's—tying allows them to protect their brand name by controlling quality of complementary goods
Tying allows the seller to meter the customer and use a two-part tariff to discriminate against the heavy user. By tying a complementary product, the firm can measure usage intensity and charge more to high-volume users.
ADVERTISING
Assumptions:
- Firm sets only one price
- Firm knows Q(P, A)—how quantity demanded depends on both price and advertising expenditure
EFFECTS OF ADVERTISING
Without advertising, AR and MR are average and marginal revenue curves at lower levels. When the firm advertises, its average and marginal revenue curves shift to the right—demand increases. Average costs rise due to advertising expenditure, but marginal cost does not change. The firm's profit increases from π₀ to π₁ as quantity sold rises from Q₀ to Q₁.
CHOOSING PRICE AND ADVERTISING EXPENDITURE
The profit function with advertising is: π = P·Q(P, A) - C(Q) - A
The marginal condition for optimal advertising is: MR_Ads = P(ΔQ/ΔA) = 1 + MC(ΔQ/ΔA)
This equals the full marginal cost of advertising (the direct cost of $1 plus the marginal production cost from the additional sales generated).
🔑 Formula: Marginal revenue from advertising = P(ΔQ/ΔA), and this should equal the full marginal cost of advertising (1 + MC·ΔQ/ΔA).
A RULE OF THUMB FOR ADVERTISING
The profit-maximizing advertising condition can be rearranged into a simple rule:
(A/Q)(ΔQ/ΔA) = (P - MC)/P = -1/E_P
Where:
- (P - MC)/P = -1/E_P is the markup from the Lerner Index
- E_A = Advertising elasticity of demand (ΔQ/ΔA)(A/Q)
- E_P = Price elasticity of demand
Rule of Thumb: To maximize profit, the firm's advertising-to-sales ratio should equal minus the ratio of the advertising elasticity to the price elasticity.
A/PQ = -(E_A / E_P)
📐 Formula: A/PQ = -(E_A / E_P) → The advertising-to-sales ratio should equal the negative of the advertising elasticity divided by the price elasticity.
Example:
- R(Q) = $1 million/year (annual revenue)
- $10,000 budget for A (advertising = 1% of revenues)
- E_A = 0.2 (increase budget by $20,000, sales increase by 20%)
- E_P = -4 (markup price over MC is substantial)
Question: Should the firm increase advertising? YES. The optimal ratio: A/PQ = -(0.2 / -4) = -(-0.05) = 5%. So optimal advertising = 5% × $1,000,000 = $50,000. Current advertising is only $10,000, so the firm should increase its budget to $50,000.
Key Questions:
- When E_A is large, do you advertise more or less? More, because advertising is more effective at generating sales.
- When E_P is large (more elastic demand), do you advertise more or less? Less, because if demand is very price elastic, the firm cannot charge high markups, reducing the incentive to advertise.
ADVERTISING: IN PRACTICE
Estimates of advertising-to-sales ratios for different industries:
| Industry | E_P | E_A | Implication |
|---|---|---|---|
| Supermarkets | -10 | 0.1 to 0.3 | A/PQ = -(0.1/-10) = 1% to 3% |
| Convenience stores | -5 | very small | Very low advertising |
| Designer jeans | -3 to -4 | 0.3 to 1 | A/PQ = -(0.3/-3) = 10% to 25% |
| Laundry detergents | -3 to -4 | very large | Very high advertising |
💡 Why this matters: Supermarkets with elastic demand (-10) and low advertising elasticity (0.1-0.3) should spend only 1-3% of revenue on ads. Designer jeans with less elastic demand (-3 to -4) and higher advertising elasticity (0.3-1) should spend much more (10-25%).
⭐ Key Takeaways
- Mixed bundling dominates pure bundling when marginal costs are positive, because it allows firms to avoid selling goods at a loss to consumers whose reservation prices are below marginal cost, while still capturing consumer surplus from others through the bundle. 2. The profit-maximizing advertising-to-sales ratio equals the negative ratio of advertising elasticity to price elasticity — this rule of thumb tells managers exactly how much to spend on promotion relative to revenue. 3. When marginal costs are zero, mixed bundling still outperforms pure bundling because it enables price discrimination by charging high-reservation consumers more for the bundle and low-reservation consumers less for individual items. 4. Tying is a special form of bundling that allows firms to meter customer usage and implement two-part tariffs to extract more surplus from heavy users, while also protecting brand reputation. 5. Higher advertising elasticity and lower price elasticity both lead to higher optimal advertising spending — firms with inelastic demand and responsive consumers should advertise aggressively, while firms with elastic demand and unresponsive consumers should advertise little.
🧠 Quick Revision Questions
-
Why is mixed bundling more profitable than pure bundling when some consumers have reservation prices below marginal cost?
-
Calculate the profit from pure bundling if four consumers each have a reservation price of $90 for a bundle of two goods with C₁ = $20 and C₂ = $30.
-
What is the rule of thumb for the optimal advertising-to-sales ratio, and how is it derived from the marginal conditions?
-
If a firm has E_A = 0.5 and E_P = -2.5, what percentage of revenue should it spend on advertising?
-
Explain how tying allows a firm to "meter" customers and implement a two-part tariff for price discrimination.
📘 Lecture 39 — Monopolistic Competition
📖 Overview: This lecture introduces monopolistic competition as a market structure characterized by many firms, free entry and exit, and differentiated products. It examines how firms behave in the short and long run, compares monopolistic competition with perfect competition, and discusses economic efficiency implications using real-world examples from cola and coffee markets.
🗂️ Topics Covered
The lecture covers the characteristics and definition of monopolistic competition, the makings of this market structure including product differentiation and free entry/exit, short-run and long-run equilibrium for a monopolistically competitive firm, comparison with perfect competition equilibrium, analysis of economic efficiency and deadweight loss, excess capacity, and empirical elasticities of demand for brands of colas and ground coffee.
📝 Lecture Summary
MONOPOLISTIC COMPETITION CHARACTERISTICS
Monopolistic competition is a market structure with three key characteristics: many firms, free entry and exit, and differentiated product. The amount of monopoly power a firm possesses depends on the degree of differentiation. Examples of this very common market structure include toothpaste, soap, and cold remedies.
🔑 Definition — Monopolistic Competition: A market structure with many firms selling differentiated products, with free entry and exit, giving firms some monopoly power based on the degree of product differentiation.
📌 Example — Toothpaste (Brand J): Suppose an MNC is the sole producer of Brand J. Consumers can have a preference for Brand J based on taste, reputation, or decay preventing efficacy. The greater the preference (differentiation), the higher the price the firm can charge.
THE MAKINGS OF MONOPOLISTIC COMPETITION
Two important characteristics define this market structure:
- Differentiated but highly substitutable products
- Free entry and exit
💡 Why this matters: Product differentiation gives firms some market power (downward-sloping demand), but high substitutability keeps demand relatively elastic, limiting that power.
A MONOPOLISTICALLY COMPETITIVE FIRM IN THE SHORT AND LONG RUN
Short-Run Observations:
- Downward sloping demand due to differentiated product
- Demand is relatively elastic because of good substitutes
- MR < P (marginal revenue is less than price)
- Profits are maximized when MR = MC
- This firm is making economic profits (P > AC at QSR)
Long-Run Observations:
- Profits will attract new firms to the industry (no barriers to entry)
- The old firm’s demand will decrease to DLR (shifts left)
- Firm’s output and price will fall
- Industry output will rise (more firms enter)
- No economic profit (P = AC at QLR)
- P > MC — some monopoly power remains
📐 Formula: Profit maximization condition: MR = MC → Produce where marginal revenue equals marginal cost 📌 Example: In short run, firm at QSR charges PSR with DSR demand curve, earning positive economic profits. In long run, entry shifts demand to DLR, price falls to PLR, output falls to QLR, and P = AC so economic profit = 0.
MONOPOLISTICALLY COMPETITIVE VS. PERFECTLY COMPETITIVE EQUILIBRIUM
In perfect competition, the firm faces a horizontal demand curve (D = MR = P) and produces at QC where P = MC, achieving productive efficiency at minimum AC.
In monopolistic competition, the firm faces a downward-sloping demand curve, produces at QMC where MR = MC, and charges P > MC, with price higher than perfect competition.
🔑 Definition — Excess Capacity: The difference between the output level at minimum average cost and the actual output produced; monopolistically competitive firms produce below minimum AC, unlike perfectly competitive firms.
MONOPOLISTIC COMPETITION AND ECONOMIC EFFICIENCY
The monopoly power (from differentiation) yields a higher price than perfect competition. If price was lowered to the point where MC = D, consumer surplus would increase by the area of the shaded triangle (deadweight loss). With no economic profits in the long run, the firm is still not producing at minimum AC and excess capacity exists.
💡 Why this matters: Even though firms earn zero economic profit in long run, monopolistic competition creates a deadweight loss (shaded triangle) compared to perfect competition, suggesting potential inefficiency.
📐 Formula: Deadweight loss = area between D (demand) and MC, from QMC to the competitive output where P = MC
📌 Example: If the market became perfectly competitive, output would increase to QC and price would fall to PC (where P = MC = minimum AC). Consumer surplus would expand by the deadweight loss triangle.
Questions raised:
- If the market became competitive, what would happen to output and price?
- Should monopolistic competition be regulated?
MONOPOLISTIC COMPETITION IN THE MARKET FOR COLAS AND COFFEE
The markets for soft drinks and coffee illustrate the characteristics of monopolistic competition. Each brand has some monopoly power due to differentiation, but faces competition from close substitutes.
ELASTICITIES OF DEMAND FOR BRANDS OF COLAS AND COFFEE
Empirical data shows varying price elasticities of demand:
Colas:
- Brand X: -2.4
- Brand Y: -5.2 to -5.7
Ground Coffee:
- Hills Brothers: -7.1
- Maxwell House: -8.9
- Chase and Sanborn: -5.6
📐 Formula: Lerner Index of Monopoly Power = (P - MC)/P = -1/Ed → where Ed is the firm's price elasticity of demand (more inelastic demand → greater monopoly power)
📌 Example: Brand X (elasticity -2.4) has more monopoly power than Brand Y (elasticity -5.2 to -5.7) because its demand is less elastic. Hills Brothers (-7.1) has more monopoly power than Maxwell House (-8.9). In general, coffee brands have more elastic demand (less monopoly power) than cola brands.
Questions:
- Why is the demand for Brand X more price inelastic than for Brand Y? Brand X likely has stronger brand loyalty, more differentiated product, or consumers perceive fewer close substitutes.
- Is there much monopoly power in these two markets? Cola brands have some monopoly power (Elasticities -2.4 to -5.7), while coffee brands have very little monopoly power (higher elasticities -5.6 to -8.9).
- Define the relationship between elasticity and monopoly power: Monopoly power is inversely related to price elasticity of demand — the less elastic (more inelastic) the demand, the greater the monopoly power (higher Lerner Index).
⭐ Key Takeaways
Monopolistic competition combines product differentiation with free entry, giving firms some monopoly power but zero long-run economic profits. In the short run, firms maximize profit where MR=MC and can earn positive profits; however, free entry eliminates these profits in the long run as demand shifts left until P=AC. Compared to perfect competition, monopolistic competition results in higher prices, lower output, excess capacity (production below minimum AC), and a deadweight loss triangle from monopoly power. The degree of monopoly power depends on price elasticity of demand — lower elasticity means greater monopoly power, as shown by cola brands (less elastic) having more monopoly power than coffee brands (more elastic).
🧠 Quick Revision Questions
- What are the three key characteristics of monopolistic competition, and how do they differ from perfect competition?
- In the long run, why does a monopolistically competitive firm earn zero economic profit, yet still have some monopoly power (P > MC)?
- What is excess capacity, and why does it arise under monopolistic competition but not under perfect competition?
- Using the Lerner Index, explain why Brand X cola (elasticity -2.4) has more monopoly power than Maxwell House coffee (elasticity -8.9).
- Draw and explain the deadweight loss triangle that exists under monopolistic competition compared to the perfectly competitive equilibrium.
📘 Lecture 40 — OLIGOPOLY
📖 Overview: This lecture explores oligopoly, a market structure characterized by a small number of firms where strategic interactions and rival behavior are crucial. It covers equilibrium concepts like Nash and Cournot, the impact of first-mover advantages, and price competition models, demonstrating why firms must consider competitors’ responses when making decisions.
🗂️ Topics Covered
This lecture covers the characteristics and examples of oligopoly, barriers to entry, and management challenges. It explains equilibrium in an oligopolistic market, introduces the Nash Equilibrium and the Cournot Model with duopoly and reaction curves, including a linear demand curve example. The lecture also covers the Stackelberg Model for first-mover advantage and Price Competition using the Bertrand Model for both homogenous and differentiated products.
📝 Lecture Summary
Characteristics
Oligopoly is a market structure with a small number of firms, where product differentiation may or may not exist, and there are barriers to entry. Examples include automobiles, steel, aluminum, petrochemicals, electrical equipment, and computers.
Barriers to entry are either natural (scale economies, patents, technology, name recognition) or strategic actions (flooding the market, controlling an essential input).
Management challenges in oligopoly involve strategic actions and anticipating rival behavior. For example, a firm must consider possible rival responses to a 10% price cut.
Equilibrium In An Oligopolistic Market
Unlike in perfect competition, monopoly, and monopolistic competition, producers in oligopoly must consider the response of competitors when choosing output and price. Equilibrium is defined as firms doing the best they can, having no incentive to change their output or price, while all firms assume competitors are taking rival decisions into account.
🔑 Definition — Nash Equilibrium: Each firm is doing the best it can given what its competitors are doing.
The Cournot Model
This model focuses on a duopoly – two firms competing with each other, producing a homogenous good, where the output of the other firm is assumed to be fixed.
Firm 1’s Output Decision:
- If Firm 1 thinks Firm 2 will produce nothing, its demand curve, D₁(0), is the market demand curve.
- If Firm 1 thinks Firm 2 will produce 50 units, its demand curve D₁(50) is shifted to the left by this amount.
- If Firm 1 thinks Firm 2 will produce 75 units, its demand curve D₁(75) is shifted further left.
- The profit-maximizing output for Firm 1 depends on the expected output of Firm 2.
🔑 Definition — Reaction Curve: A firm’s profit-maximizing output is a decreasing schedule of the expected output of the other firm. Firm 1’s reaction curve shows how much it will produce as a function of how much it thinks Firm 2 will produce. Firm 2’s reaction curve shows how much it will produce as a function of how much it thinks Firm 1 will produce.
In Cournot equilibrium, each firm correctly assumes how much its competitor will produce and thereby maximizes its own profits. The equilibrium is found at the intersection of the two reaction curves.
💡 Why this matters: If firms are not producing at the Cournot equilibrium, they will adjust output until they reach it. A key question is when it is rational to assume a competitor’s output is fixed.
The Linear Demand Curve: An Example of the Cournot Equilibrium
- Duopoly: Q = Q₁ + Q₂
- Market demand: P = 30 - Q
- MC₁ = MC₂ = 0
📐 Formula (Cournot Reaction Curves): The profit-maximizing condition MR=MC leads to reaction curves. For Firm 1, MR = 30 - 2Q₁ - Q₂ = 0.
📌 Example: For the linear demand curve P = 30 - Q with zero marginal cost, the Cournot equilibrium is found when Q₁ = Q₂ = 10, resulting in a total output Q = 20 and price P = 10.
Profit Maximization with Collusion:
- Collusion Curve: Q₁ + Q₂ = 15, showing all pairs of output Q₁ and Q₂ that maximize total profits.
- When colluding, Q₁ = Q₂ = 7.5, leading to less output (total 15) and higher profits than the Cournot equilibrium.
First Mover Advantage- The Stackelberg Model
Assumptions:
- One firm can set output first.
- MC = 0.
- Market demand is P = 30 - Q, where Q = total output.
- Firm 1 sets output first, and Firm 2 then makes an output decision.
Firm 1 must consider the reaction of Firm 2. Firm 2 takes Firm 1’s output as fixed and determines output with the Cournot reaction curve.
📌 Example: Firm 1 chooses Q₁ so that MR = MC = 0. Revenue R₁ = P*Q₁ = (30-Q)Q₁ = 30Q₁ - Q₁² - Q₂Q₁. Substituting Firm 2’s reaction curve and solving, Firm 1’s output is 15, Firm 2’s output is 7.5. Conclusion: Firm 1’s output is twice as large as Firm 2’s, and Firm 1’s profit is twice as large as Firm 2’s.
Price Competition
Competition in an oligopolistic industry may occur with price instead of output.
🔑 Definition — Bertrand Model: A model used to illustrate price competition in an oligopolistic industry with homogenous goods.
Assumptions:
- Homogenous good.
- Market demand is P = 30 - Q, where Q = Q₁ + Q₂.
- MC = $3 for both firms (MC₁ = MC₂ = $3).
- Firms compete with price, not quantity.
📌 Example: In the Cournot equilibrium with these assumptions, P = $12 and π for both firms = $81. However, in the Nash equilibrium of the Bertrand model, firms undercut each other’s prices until P = MC. The Nash equilibrium is P₁ = P₂ = $3 (MC), total Q = 27, Q₁ & Q₂ = 13.5, and π = 0.
Price Competition with Differentiated Products
Market shares are determined not just by prices, but by differences in design, performance, and durability.
Assumptions (Duopoly with Differentiated Products):
- FC = $20, VC = 0.
- Firm 1’s demand: Q₁ = 12 - 2P₁ + P₂
- Firm 2’s demand: Q₂ = 12 - 2P₂ + P₁
🔑 Definition — Nash Equilibrium in Prices: Each firm chooses its price to maximize profit, given the price of its competitor. The equilibrium is at the intersection of the firms’ reaction curves.
📌 Example: The Nash equilibrium for the differentiated products duopoly occurs at P₁ = $4 and P₂ = $4. The collusive equilibrium (where both firms cooperate to maximize joint profits) would occur at a higher price, such as P₁ = $6 and P₂ = $6.
⭐ Key Takeaways
- Oligopoly is defined by strategic interdependence where each firm’s decisions are contingent on the reactions of its rivals, leading to concepts like the Nash Equilibrium.
- The Cournot Model assumes firms compete on quantity, leading to an equilibrium where firms’ reaction curves intersect, with profits typically lower than collusion but higher than perfect competition.
- The Stackelberg Model demonstrates a first-mover advantage where the leader can secure a larger market share and higher profits by committing to a high output level before the follower.
- The Bertrand Model shows that when firms compete on price with homogenous goods, the Nash equilibrium drives price down to marginal cost, resulting in zero economic profits.
- When products are differentiated, price competition is softened, and firms can earn positive profits in a Nash Equilibrium in Prices.
🧠 Quick Revision Questions
- What is the key difference between equilibrium in oligopoly and equilibrium in perfect competition or monopoly?
- In the Cournot model, what is a reaction curve and how is the Cournot equilibrium determined?
- In the Stackelberg model, why does the first mover produce more output and earn higher profits than the follower?
- According to the Bertrand model with homogenous goods, what is the Nash equilibrium price and profit, and why?
- How does product differentiation change the nature of price competition in an oligopoly?
📘 Lecture 41 — Competition versus Collusion: The Prisoners’ Dilemma
📖 Overview: This lecture examines why oligopolistic firms often fail to collude and earn higher profits, even when cooperation would benefit them. It introduces the Prisoners’ Dilemma as a game theory model to explain the tension between cooperation and self-interest in oligopoly markets, and explores real-world pricing behaviors like price leadership, the kinked demand curve, and cartel dynamics.
🗂️ Topics Covered
The lecture covers the fundamental conflict between competition and collusion through the Prisoners’ Dilemma, including a payoff matrix for pricing games between two firms. It then examines the kinked demand curve model explaining price rigidity, price signaling and leadership patterns, the dominant firm model, and finally cartel characteristics with case studies of OPEC (successful) and CIPEC (unsuccessful), concluding with conditions necessary for cartel success.
📝 Lecture Summary
Competition versus Collusion: The Prisoners’ Dilemma
Why wouldn’t each firm set the collusion price independently and earn the higher profits that occur with explicit collusion? With fixed costs (FC) = $20 and variable costs (VC) = $0, Firm 1’s demand: Q₁ = 12 − 2P₁ + P₂, Firm 2’s demand: Q₂ = 12 − 2P₂ + P₁. In Nash Equilibrium, P = $4 and π = $12. Under collusion, P = $6 and π = $16.
🔑 Definition — Nash Equilibrium: A set of strategies where each firm does the best it can given its competitor’s strategy, and neither has an incentive to unilaterally change.
📌 Example: Possible pricing outcomes with Firm 1 at P=$6 and Firm 2 at P=$4:
- π₁ = (6)[12 − (2)(6) + 4] − 20 = (6)(4) − 20 = $4
- π₂ = (4)[12 − (2)(4) + 6] − 20 = (4)(10) − 20 = $20 This shows that if one firm cheats while the other colludes, the cheater earns $20, while the cooperative firm only earns $4.
Payoff Matrix for Pricing Game
These two firms are playing a non-cooperative game. Each firm independently does the best it can taking its competitor into account. The payoff matrix shows: if both charge $4, each earns $12; if both charge $6, each earns $16; but if one charges $4 and the other $6, the cheater gets $20 and the colluder gets $4.
💡 Why this matters: Both firms will choose $4 (the lower profit) even though $6 yields higher profits for both, because each firm fears being cheated by the other.
The Prisoners’ Dilemma Scenario
Two prisoners have been accused of collaborating in a crime. They are in separate jail cells and cannot communicate. Each has been asked to confess to the crime. The payoff matrix shows:
- If both confess: −5, −5 years
- If both don’t confess: −1, −1 years
- If A confesses and B doesn’t: A gets −1, B gets −10
- If A doesn’t confess and B confesses: A gets −10, B gets −1
🔑 Definition — Prisoners’ Dilemma: A game in which each player has a dominant strategy to act in self-interest, leading to an outcome worse for both than if they had cooperated.
📌 Example: The dominant strategy for each prisoner is to confess (to avoid −10), yet both confessing (−5, −5) is worse than both keeping quiet (−1, −1).
Conclusions: Oligopolistic Markets
- Collusion will lead to greater profits. 2) Explicit and implicit collusion is possible. 3) Once collusion exists, the profit motive to break and lower price is significant.
Implications of the Prisoners’ Dilemma for Oligopolistic Pricing
Observations of Oligopoly Behavior
In some oligopoly markets, pricing behavior in time can create a predictable pricing environment and implied collusion may occur. In other oligopoly markets, the firms are very aggressive and collusion is not possible. Firms are reluctant to change price because of the likely response of their competitors. In this case prices tend to be relatively rigid.
The Kinked Demand Curve
If the producer raises price the competitors will not follow and the demand will be elastic. If the producer lowers price the competitors will follow and the demand will be inelastic. So long as marginal cost is in the vertical region of the marginal revenue curve, price and output will remain constant.
🔑 Definition — Kinked Demand Curve: A demand curve that is elastic above the current price (because competitors won’t match increases) and inelastic below the current price (because competitors match decreases), explaining price rigidity in oligopoly.
📐 Formula: The demand curve is kinked at the current price P*, with a corresponding discontinuous marginal revenue (MR) curve having a vertical gap. As long as MC falls within this gap, price P* and output Q* remain constant.
Price Signaling & Price Leadership
Price signaling is an implicit collusion in which a firm announces a price increase in the hope that other firms will follow suit. Price leadership is a pattern of pricing in which one firm regularly announces price changes that other firms then match.
The Dominant Firm Model
In some oligopolistic markets, one large firm has a major share of total sales, and a group of smaller firms supplies the remainder of the market. The large firm might then act as the dominant firm, setting a price that maximizes its own profits.
🔑 Definition — Dominant Firm Model: A pricing model where one large firm (the dominant firm) sets the price, and smaller fringe firms act as price takers, supplying output at that price.
📌 Example: The dominant firm’s demand curve (Dᴰ) is the difference between total market demand (D) and the supply of fringe firms (Sғ). The dominant firm sets P* where its MR = MC, fringe firms sell Qғ at that price, and total sales are Qᴛ = Qғ + Qᴰ.
Cartels
Cartels are explicit agreements to set output and price. They may not include all firms and are most often international. Examples of successful cartels include OPEC and the International Bauxite Association. Examples of unsuccessful cartels include Copper, Tin, Coffee, Tea, and Cocoa.
🔑 Definition — Cartel: A group of producers that explicitly agrees to coordinate output and pricing decisions to maximize joint profits, effectively acting as a monopolist.
Conditions for success:
- A competitive alternative sufficiently deters cheating
- Potential of monopoly power—inelastic demand
The OPEC Oil Cartel
TD is the total world demand curve for oil, and Sᴄ is the competitive supply. OPEC’s demand is the difference between the two. OPEC’s profit-maximizing quantity (Qᴏᴘᴇᴄ) is found at the intersection of its MR and MC curves. At this quantity, OPEC charges price P*. Observations about OPEC: Very low MC, TD is inelastic, Non-OPEC supply is inelastic, therefore Dᴏᴘᴇᴄ is relatively inelastic.
📌 Example: Without the cartel, the competitive price (Pᴄ) occurs where Dᴏᴘᴇᴄ = MCᴏᴘᴇᴄ. With the cartel, P* is significantly higher than Pᴄ, and Qᴏᴘᴇᴄ is restricted.
The CIPEC Copper Cartel
TD and Sᴄ are relatively elastic compared to OPEC. Consequently, Dᴄɪᴘᴇᴄ is elastic, meaning CIPEC has little monopoly power. P* is closer to Pᴄ. This illustrates why CIPEC was unsuccessful relative to OPEC.
📌 Example: For CIPEC, the difference between P* and Pᴄ is small because the demand curve for copper is more elastic, and fringe supply responds more to price changes.
Observations
To be successful: Total demand must not be very price elastic. Either the cartel must control nearly all of the world’s supply, or the supply of non-cartel producers must not be price elastic.
⭐ Key Takeaways
The Prisoners’ Dilemma demonstrates why oligopolistic firms often fail to collude despite higher joint profits—each firm has a dominant strategy to cheat, leading to a lower-profit Nash equilibrium. The kinked demand curve explains price rigidity in oligopoly: firms don’t raise prices (fearing loss of market share) and don’t cut prices (fearing price wars). Price signaling and price leadership are forms of implicit collusion that help firms coordinate without explicit agreements. In the dominant firm model, one large firm sets the price while smaller fringe firms supply the residual market. Cartels succeed only when total demand and non-cartel supply are both relatively inelastic, giving the cartel monopoly power, as OPEC demonstrates but CIPEC does not.
🧠 Quick Revision Questions
- In the pricing game example from the lecture, why do both firms end up charging $4 (earning $12 each) when they could both charge $6 and earn $16 each?
- What is the dominant strategy in a Prisoners’ Dilemma, and why does it lead to a suboptimal outcome for both players?
- Explain the shape of the kinked demand curve and why it results in price rigidity in oligopoly markets.
- What is the difference between price signaling and price leadership as forms of implicit collusion?
- Why was OPEC a successful cartel while CIPEC was not, in terms of demand and supply elasticities?