π Lecture 23 β PERFECTLY COMPETITIVE MARKETS (Continued)
π Overview: This lecture continues the analysis of perfectly competitive markets by examining how firms make production decisions when incurring losses in the short run. It explains the shutdown condition, derives the firmβs short-run supply curve from marginal cost, and shows how industry supply is constructed by aggregating individual firm supplies.
ποΈ Topics Covered
The lecture covers the short-run production decision for a competitive firm facing losses, summary rules for profit maximization and shutdown, the case of an aluminum smelting plant as a numerical example, three guidelines for managers regarding marginal cost estimation, the derivation of the firmβs short-run supply curve, the firmβs response to input price changes, the stepped marginal cost of petroleum refining, and the construction of the short-run market supply curve through horizontal summation of individual firm supply curves.
π Lecture Summary
A COMPETITIVE FIRM INCURRING LOSSES
A firm can continue producing even when it is making losses, as long as it covers its variable costs. At the profit-maximizing output level q* where MR = MC, if the market price P is below ATC but above AVC, the firm incurs a loss equal to (ATC β P) Γ q*. This loss is smaller than the loss of shutting down (which would equal total fixed costs).
π Definition β Loss-minimizing output: The output level q* where MR = MC, even if P < ATC, because the firm can still cover all variable costs and some fixed costs. π Formula β Loss = (ATC β P) Γ q* β The total economic loss when price lies below average total cost but above average variable cost. π Example: If ATC = $10, P = $8, and q* = 100 units, then Loss = ($10 β $8) Γ 100 = $200. The firm loses $200 but would lose more (all fixed costs) if it shut down entirely. π‘ Why this matters: A firm should not automatically shut down when price falls below ATC; the relevant comparison is between price and AVC.
CHOOSING OUTPUT IN SHORT RUN
Summary of Production Decisions:
- Profit is maximized when MC = MR.
- If P > ATC, the firm is making profits.
- If AVC < P < ATC, the firm should produce at a loss (since it covers variable costs plus some fixed costs).
- If P < AVC < ATC, the firm should shut down because it cannot even cover its variable costs.
THE SHORT-RUN OUTPUT OF AN ALUMINUM SMELTING PLANT
For a smelting plant with stepped marginal costs:
- Price between $1140 and $1300: output = 600 tons/day
- Price > $1300: output = 900 tons/day
- Price < $1140: output = 0 tons/day (shut down)
π Definition β Shutdown point: The minimum point on the AVC curve; at any price below this, the firm produces zero output in the short run. π Example: If the aluminum price falls below $1140 per ton, the smelter shuts down because it cannot cover its variable costs of production at any positive output level.
SOME COST CONSIDERATIONS FOR MANAGERS
Three guidelines for estimating marginal cost:
- Average variable cost should not be used as a substitute for marginal cost.
- A single item on a firmβs accounting ledger may have two components, only one of which involves marginal cost.
- All opportunity cost should be included in determining marginal cost.
π Definition β Marginal Cost (MC): The additional cost of producing one more unit of output; it is distinct from average variable cost.
A COMPETITIVE FIRMβS SHORT-RUN SUPPLY CURVE
The firmβs short-run supply curve is the portion of its MC curve that lies above the AVC curve. The firm chooses output where MR = MC, as long as it covers its variable costs. If P falls below AVC, the firm produces zero.
π Definition β Short-run supply curve: The MC curve above the shutdown point (minimum AVC). π Rule β Supply is determined by P = MR = MC for all prices above AVC. π Observations: Supply is upward sloping due to diminishing returns. Higher price compensates the firm for higher cost of additional output and increases total profit because it applies to all units.
FIRMβS RESPONSE TO AN INPUT PRICE CHANGE
When the price of an input (e.g., raw material) increases, the MC curve shifts upward. The firm reduces its output so that the new higher marginal cost equals the market price. The reduction in output generates savings to the firm.
π Example: If MCβ shifts to MCβ due to an input cost increase, the firmβs output falls from qβ to qβ at the same market price of $5.
THE SHORT-RUN PRODUCTION OF PETROLEUM PRODUCTS
The refining process has a stepped marginal cost (SMC) curve because different refining units come online at different capacity levels. The MC of producing a mix of petroleum products from crude oil increases sharply at several output levels as the refinery shifts from one processing unit to another.
π Observations:
- Price = $23 produces 8,000 barrels/day
- Price = $24β$25 produces 9,000β10,000 barrels/day
- A stepped MC function means small changes in price may not trigger a change in output.
THE SHORT-RUN MARKET SUPPLY CURVE
The short-run market supply curve shows the amount of output the industry will produce in the short run for every possible price. It is the horizontal summation of the supply curves of all individual firms in the market.
π Definition β Short-run market supply curve: The sum of quantities supplied by all firms at each price, found by adding individual firm supply curves horizontally. π Formula β Q_market(P) = Ξ£ q_i(P) for all firms i where P β₯ AVC minimum. π‘ Why this matters: If increasing output raises input costs (e.g., higher wages for more workers), the market supply curve becomes steeper because each firmβs MC shifts upward as industry expands.
β Key Takeaways
The most critical concepts from this lecture are: (1) A competitive firm maximizes profit where P = MC, but will shut down if price falls below average variable cost; (2) The firmβs short-run supply curve is the portion of its MC curve above the minimum AVC; (3) Losses do not automatically trigger shutdownβthe firm should continue producing if P > AVC, even if P < ATC; (4) Input price increases shift MC upward, reducing optimal output; and (5) The short-run market supply curve is the horizontal sum of individual firm supply curves, and if input costs rise with industry output, the curve becomes steeper.
π§ Quick Revision Questions
- Under what condition should a competitive firm continue producing even though it is making losses in the short run?
- Why is the firmβs short-run supply curve the upward-sloping portion of its marginal cost curve?
- What is the shutdown point, and how is it identified on a cost diagram?
- How does the short-run market supply curve change if an increase in industry output raises the price of an input?
- For the aluminum smelting plant, why does output jump directly from 0 to 600 tons as price rises above $1140?
Here is the summary of the provided lecture text, formatted exactly as requested.
π Lecture 24 β Equilibrium in Perfectly Competitive Markets
π Overview: This lecture analyzes how firms and markets reach equilibrium in perfectly competitive markets, focusing on both the short run and long run. It introduces the concept of elasticity of market supply, calculates producer surplus, and explains the crucial distinction between accounting profit and economic profit to understand firm behavior and market entry/exit.
ποΈ Topics Covered
The lecture begins by defining the elasticity of market supply and discussing its extreme cases. It then uses a detailed example of the world copper industry to construct a short-run world supply curve. The core of the lecture defines and graphically illustrates producer surplus in the short run for both a single firm and a market. Finally, it contrasts short-run and long-run output decisions, explains the difference between accounting profit and economic profit, and outlines the dynamics of entry and exit in a competitive industry leading to long-run equilibrium with zero economic profit.
π Lecture Summary
ELASTICITY OF MARKET SUPPLY
The lecture begins by defining the price elasticity of market supply, Eβ. It notes that perfectly inelastic short-run supply (Eβ = 0) arises when an industryβs plant and equipment are so fully utilized that new plants must be built to achieve greater output. Conversely, perfectly elastic short-run supply (Eβ = β) arises when marginal costs are constant.
π Definition β Price Elasticity of Supply (Eβ) : The percentage change in quantity supplied resulting from a 1-percent change in price. π Formula: Eβ = (ΞQ / Q) / (ΞP / P) π‘ Why this matters: Understanding supply elasticity predicts how easily an industry can respond to price changes.
THE WORLD COPPER INDUSTRY (1999)
The lecture presents data from the world copper industry in 1999. It lists the annual production (thousand metric tons) and marginal cost (dollars/pound) for the largest producers. For instance, Chile is the largest producer (3,660 thousand metric tons) with the lowest marginal cost ($0.50/pound), while Poland has the highest marginal cost ($0.80/pound). This data is used to construct the short-run world supply of copper by ordering producers from lowest to highest marginal cost.
PRODUCER SURPLUS IN THE SHORT RUN
Firms earn a surplus on all but the last unit of output. The producer surplus is the sum over all units produced of the difference between the market price of the good and the marginal cost of production. Graphically, producer surplus is the area below the market price and above the supply (MC) curve, up to the quantity produced. The lecture notes an important relationship: in the short run with positive fixed costs, producer surplus (PS) is greater than profit (Ο). Specifically, Producer Surplus = R - VC, while Profit (Ο) = R - VC - FC. For a market, the market producer surplus is the difference between the equilibrium price (P*) and the market supply curve (S) from 0 to the equilibrium quantity (Q*).
π Definition β Producer Surplus (PS) : The difference between the market price a firm receives and its marginal cost of production, summed over all units produced. π Formula: PS = R - VC (Revenue minus Variable Cost) π Example: In the provided graph, at output q*, revenue (R) is the area OABq*. Variable cost (VC) is the area ODCq*. Therefore, the producer surplus (PS) is the area ABCD (OABq* - ODCq*).
CHOOSING OUTPUT IN LONG RUN
In the long run, a firm can alter all its inputs, including the size of the plant. The model assumes free entry and free exit. In the short run, a firm might be profitable at price P=$40. In the long run, it will increase its plant size to produce at qβ, where Long-run marginal cost (LMC) equals marginal revenue. This leads to a larger long-run profit (EFGD) compared to the short-run profit (ABCD). However, if increased output by all firms lowers the market price (e.g., to $30), the firm may no longer be making a profit, raising a key question for analysis.
ACCOUNTING PROFIT & ECONOMIC PROFIT
The lecture distinguishes between two critical profit concepts. Accounting profit (Ο) considers only explicit labor costs (wL), while Economic profit (Ο) takes into account the opportunity cost of capital (rK). This distinction is crucial for understanding firm behavior in a competitive market.
π Definition β Accounting Profit: Total revenue minus explicit costs (e.g., labor). π Formula: Ο (Accounting) = R - wL π Definition β Economic Profit: Total revenue minus all costs, including both explicit and implicit opportunity costs (e.g., the opportunity cost of capital). π Formula: Ο (Economic) = R - wL - rK
ZERO-PROFIT
The concept of zero economic profit is central to competitive equilibrium. If R > wL + rK, economic profits are positive, attracting new firms. If R = wL + rK, the firm earns zero economic profits but is earning a normal rate of return, indicating the industry is competitive. If R < wL + rK, the firm should consider going out of business.
ENTRY AND EXIT
The long-run response to short-run profits is to increase output and profits. These profits will attract other producers. More producers increase industry supply, which lowers the market price. This process continues until all firms in the market earn zero economic profit, at which point there is no incentive for entry or exit, and the market is in long-run equilibrium.
β Key Takeaways
For the exam, you must understand that producer surplus (R β VC) measures a firmβs benefit from trading and differs from profit (R β VC β FC) by the amount of fixed costs. The most critical distinction is between accounting profit and economic profit; only positive economic profit (R > wL + rK) provides an incentive for new firms to enter an industry. In the long run, free entry and exit ensure that all firms earn zero economic profit, meaning they are covering all explicit and opportunity costs (earning a normal rate of return). Finally, remember that firm and market supply curves are derived from marginal cost curves, and the market supply curve determines producer surplus.
π§ Quick Revision Questions
- What is the relationship between producer surplus (PS) and profit (Ο) in the short run when fixed costs are positive? Explain why.
- A firmβs total revenue is $100, its explicit labor costs are $60, and the opportunity cost of its capital is $30. What is its accounting profit? What is its economic profit?
- According to the copper industry example, which country produced the most copper and at what marginal cost?
- If firms in a competitive market are earning positive economic profits, describe the process that will lead the market back to long-run equilibrium.
- What does it mean for a firm to produce at an output level where its long-run marginal cost (LMC) equals its price? What is the condition for long-run equilibrium?
π Lecture 25 β Equilibrium in Perfectly Competitive Markets (Continued)
π Overview: This lecture completes the analysis of long-run competitive equilibrium, focusing on zero-profit conditions, economic rent, and the shape of the industry's long-run supply curve. It explains why firms earn zero economic profit in the long run and how input costs shape supply in constant-cost, increasing-cost, and decreasing-cost industries.
ποΈ Topics Covered
Long-run competitive equilibrium conditions (MC=MR and P=LAC), market adjustments when price is below average cost, economic rent as the difference between willingness to pay and minimum payment required, zero-profit equilibrium with fixed inputs like location, and the industry's long-run supply curve under constant-cost, increasing-cost, and decreasing-cost conditions.
π Lecture Summary
Long-Run Competitive Equilibrium
In long-run equilibrium, profit attracts firms into an industry. As new firms enter, supply increases until economic profit falls to zero. The firm produces where marginal cost (MC) equals marginal revenue (MR), and price equals long-run average cost (LAC). At this point, there is no incentive for firms to enter or leave, and profit equals zero. The equilibrium market price is determined by industry supply and demand.
π Definition β Long-Run Competitive Equilibrium: A market state where MC = MR, P = LAC, economic profit is zero, and no firms have incentive to enter or exit.
π Formula: P = LAC = MC β [In long-run equilibrium, price equals both long-run average cost and marginal cost, ensuring zero economic profit.]
π Example: If industry demand shifts right, price rises above LAC, attracting new firms. Supply increases until price falls back to LAC, restoring zero profit.
Economic Rent
Economic rent is the difference between what firms are willing to pay for an input and the minimum amount necessary to obtain it. It arises when an input is fixed or unique, such as a desirable location. If the opportunity cost of the input is not accounted for, it may appear that economic profits exist in the long run, but these are actually economic rents.
π Definition β Economic Rent: The payment to an input beyond the minimum required to keep it in its current use β the surplus over opportunity cost.
π Example: Two firms, A and B, own their land. Firm A is located on a river, saving $10,000 in shipping costs compared to Firm B. Demand for A's location will increase its land price to $10,000. Economic rent = $10,000 (since the land cost to A was zero). Economic profit of A = 0 because the rent captures the surplus.
π‘ Why this matters: Even when economic profit is zero, firms with unique inputs can still earn rents that appear as profit if not properly measured.
Firms Earn Zero Profit in Long-Run Equilibrium
In a moderate-sized city, a baseball team sells tickets where price equals LAC and MC, earning zero economic profit (e.g., $7 per ticket, 1 million season tickets). In a larger city, a team with the same cost structure can sell tickets for $10. The difference between price ($10) and LAC ($7) is the opportunity cost of the fixed input (location) β this is economic rent, not profit. If the opportunity cost of the input is ignored, it may falsely appear that economic profits exist in the long run.
π Definition β Opportunity Cost of Land: The value of the next best use of the land, which in competitive equilibrium equals the economic rent earned by the fixed input.
The Industryβs Long-Run Supply Curve
The shape of the long-run supply curve depends on how changes in industry output affect input prices. Three assumptions: all firms have access to available technology, output increases by using more inputs (not invention), and input markets do not change with industry expansion/contraction.
- Constant-Cost Industry: Expansion does not affect input prices. Long-run supply is a horizontal line at the minimum average cost of production. For example, starting at equilibrium point A (price P1, quantity Q1), demand shifts to D2, price rises to P2, attracting firms. Supply shifts to S2, and the new equilibrium at point C has price back at P1 and quantity Q2. Long-run supply SL = LRAC is flat.
π Key Insight: SL = P = minimum LRAC. Change in output has no impact on input cost.
-
Increasing-Cost Industry: Expansion raises input prices. Long-run supply curve is upward sloping. For example, economic profits attract new firms, supply increases to S2, but due to higher input prices, the new long-run equilibrium occurs at a higher price (P3 > P1). The long-run supply curve SL connects points A and B.
-
Decreasing-Cost Industry: Expansion lowers input prices (e.g., due to economies of scale in input production). Long-run supply curve is downward sloping. For example, as output increases, input prices fall, so the new long-run equilibrium occurs at a lower price (P3 < P1).
β Key Takeaways
In long-run competitive equilibrium, all firms earn zero economic profit because any positive profit attracts entry until price equals minimum long-run average cost. When fixed inputs like location create a gap between price and production cost, the difference is economic rent β not profit β and represents the opportunity cost of that input. The industry's long-run supply curve can be horizontal (constant-cost), upward sloping (increasing-cost), or downward sloping (decreasing-cost), depending on how input prices respond to industry output changes. For the exam, remember that economic rent is distinct from profit, and that the slope of the long-run supply curve is determined by input cost behavior.
π§ Quick Revision Questions
- What three conditions define long-run competitive equilibrium?
- Explain the difference between economic profit and economic rent.
- In an increasing-cost industry, why does the long-run supply curve slope upward?
- If an industry expands and input prices fall, what shape is the long-run supply curve?
- Why might it appear that a firm earns positive long-run profit when it actually earns zero?
π Lecture 26 β PROFIT MAXIMIZATION AND COMPETITIVE SUPPLY
π Overview: This lecture explores the long-run supply curve for competitive industries under different cost conditions and examines how government policiesβsuch as output taxes and price controlsβaffect firm behavior, market output, and overall welfare. Understanding these concepts is crucial for analyzing real-world market interventions and their efficiency consequences.
ποΈ Topics Covered
The lecture begins by characterizing long-run industry supply curves for constant-cost, increasing-cost, and decreasing-cost industries, illustrated with housing examples. It then analyzes the effect of an output tax on both a single competitive firm and the entire industry, showing how taxes shift supply curves. Finally, the lecture introduces consumer and producer surplus as tools for evaluating gains and losses from government policies, applying them to price controls and examining the conditions under which competitive markets fail to achieve efficiency.
π Lecture Summary
THE INDUSTRYβS LONG-RUN SUPPLY CURVE
In a constant-cost industry, long-run supply is horizontal. A small increase in price will induce an extremely large output increase. Long-run supply elasticity is infinitely large. Inputs are readily available, so costs do not rise as industry output expands.
In an increasing-cost industry, long-run supply is upward-sloping and elasticity is positive. The slope (elasticity) depends on the rate of increase in input costs. Long-run elasticity will generally be greater than short-run elasticity of supply.
π‘ Why this matters: The shape of the long-run supply curve determines how responsive an industry is to changes in demand over time, which is crucial for predicting price and output adjustments.
Question: Describe the long-run elasticity of supply in a decreasing-cost industry. (The lecture poses this as a question for the student to answer.)
THE LONG-RUN SUPPLY OF HOUSING
Scenario 1: Owner-occupied housing β Suburban or rural areas β National market for inputs
- Questions: Is this an increasing or a constant-cost industry? What would you predict about the elasticity of supply?
- Analysis: This is likely a constant-cost industry because inputs (land, labor, materials) are readily available in a national market. Supply elasticity would be very large (highly elastic).
Scenario 2: Rental property β Urban location β High-rise construction cost
- Questions: Is this an increasing or a constant-cost industry? What would you predict about the elasticity of supply?
- Analysis: This is likely an increasing-cost industry because urban land is scarce and high-rise construction faces rising costs (e.g., taller buildings require more expensive engineering). Supply elasticity would be positive but smaller than in Scenario 1.
EFFECT OF AN OUTPUT TAX ON A COMPETITIVE FIRMβS OUTPUT
An output tax raises the firmβs marginal cost by the amount of the tax. The firm will reduce output to the point at which the marginal cost plus the tax equals the price.
π Definition β Output Tax: A tax levied on each unit of output produced by a firm. The tax shifts the firm's marginal cost curve upward by the amount of the tax (t).
π Formula: Profit-maximizing condition with tax β P = MC + t, so the firm produces where MC = P - t.
π Example (from diagram): Initially, the firm produces at qβ where price Pβ equals MCβ. After a tax t is imposed, MCβ = MCβ + t. The firm reduces output to qβ where Pβ now equals the new higher marginal cost (MCβ). AVC also shifts upward to AVCβ.
EFFECT OF AN OUTPUT TAX ON INDUSTRY OUTPUT
At the industry level, the tax shifts the entire supply curve upward by the amount of the tax. The industry supply curve shifts from Sβ to Sβ = Sβ + t. As a result, market output falls from Qβ to Qβ, and the market price increases from Pβ to Pβ. The extent of the price increase depends on the elasticities of supply and demand.
EVALUATING THE GAINS & LOSSES FROM GOVERNMENT POLICIES: CONSUMER & PRODUCER SURPLUS
Consumer surplus is the total benefit or value that consumers receive beyond what they pay for the good. Producer surplus is the total benefit or revenue that producers receive beyond what it cost to produce a good.
π Definition β Consumer Surplus: The difference between what consumers are willing to pay for a good (as measured by the demand curve) and what they actually pay. π Definition β Producer Surplus: The difference between the market price a producer receives and the marginal cost of production (as measured by the supply curve).
π Example (from diagram): Between 0 and Qβ, producers receive a net gain from selling each productβthis is producer surplus, shown as the area above the supply curve and below the market price.
WELFARE EFFECTS
To determine the welfare effect of a governmental policy, we can measure the gain or loss in consumer and producer surplus. The total change in social welfare is the sum of changes in consumer surplus and producer surplus.
GAINS AND LOSSES CAUSED BY GOVERNMENT INTERVENTION IN THE MARKET: PRICE CONTROLS
When the government imposes a price ceiling Pmax below the market-clearing price Pβ:
- The gain to consumers is the difference between rectangle A and triangle B.
- The loss to producers is the sum of rectangle A and triangle C.
- Triangles B and C together measure the deadweight loss.
CHANGE IN CONSUMER & PRODUCER SURPLUS FROM PRICE CONTROLS
Observations:
- The total loss is equal to area B + C.
- The total change in surplus = (A - B) + (-A - C) = -B β C.
- The deadweight loss is the inefficiency of the price controlsβthe loss of producer surplus exceeds the gain from consumer surplus.
- Consumers can experience a net loss in consumer surplus when demand is sufficiently inelastic.
EFFECT OF PRICE CONTROLS WHEN DEMAND IS INELASTIC
If demand is sufficiently inelastic, triangle B can be larger than rectangle A, and the consumer suffers a net loss from price controls.
π Example: Oil price controls and gasoline shortages. When demand is inelastic (consumers cannot easily reduce consumption), the shortage created by a price ceiling harms consumers more than the lower price benefits them.
PRICE CONTROLS AND NATURAL GAS SHORTAGES
π Example (from diagram): The market for natural gas (measured in Tcf, trillion cubic feet). With market-clearing price at $2.00/mcf, the government imposes a price ceiling Pmax = $1.00/mcf.
- Quantity demanded rises to 30 Tcf, quantity supplied falls to 18 Tcf, creating a shortage.
- The gain to consumers is rectangle A minus triangle B.
- The loss to producers is rectangle A plus triangle C.
- The deadweight loss is triangle B + C.
THE EFFICIENCY OF A COMPETITIVE MARKET
When do competitive markets generate an inefficient allocation of resources or market failure?
- Externalities: Costs or benefits that do not show up as part of the market price (e.g. pollution)
- Lack of Information: Imperfect information prevents consumers from making utility-maximizing decisions.
π‘ Why this matters: Government intervention in these markets can increase efficiency. However, government intervention without a market failure creates inefficiency or deadweight loss.
β Key Takeaways
A student must understand that the long-run supply curve's shape depends on whether input costs stay constant, rise, or fall as the industry expands, with constant-cost industries having perfectly elastic horizontal supply and increasing-cost industries having upward-sloping supply. Output taxes reduce firm and industry output by shifting marginal cost and supply curves upward, with the incidence of the tax shared between consumers and producers based on demand and supply elasticities. Consumer and producer surplus are powerful tools for measuring welfare changes from government policies like price controls, with deadweight loss (areas B+C) representing the net social inefficiency. Price controls create shortages and can actually harm consumers when demand is inelastic, as the loss from reduced availability outweighs the benefit of lower prices. Finally, competitive markets only generate efficient outcomes in the absence of externalities and information problems; government intervention without these market failures creates unnecessary deadweight loss.
π§ Quick Revision Questions
- What is the difference between a constant-cost industry and an increasing-cost industry in terms of long-run supply curve shape and elasticity?
- How does an output tax affect a competitive firm's profit-maximizing output level, and what condition determines the new equilibrium?
- Draw the diagram for price controls and label the areas representing consumer gain, producer loss, and deadweight loss. What is the net effect on total surplus?
- Under what condition will consumers suffer a net loss from price controls, and why does this happen?
- What are the two main causes of market failure that justify government intervention in an otherwise competitive market?
π Lecture 27 β The Analysis of Competitive Markets
π Overview: This lecture examines how government price controlsβboth price ceilings and price floorsβcreate welfare losses in competitive markets. It applies supply and demand analysis to measure changes in consumer and producer surplus, using real-world examples including the minimum wage and airline regulation to illustrate deadweight loss.
ποΈ Topics Covered
The lecture covers welfare loss when price is held below market-clearing level, welfare loss when price is held above market-clearing level, minimum prices including price floors, the minimum wage policy and its unemployment effects, and airline regulation under the Civil Aeronautics Board including the effects of deregulation.
π Lecture Summary
WELFARE LOSS IF PRICE IS HELD BELOW MARKET-CLEARING LEVEL
When the government sets a price ceiling below the equilibrium price, consumer surplus increases while producer surplus decreases. Consumers who can purchase the good benefit from the lower price, but the quantity demanded exceeds the quantity supplied, creating a shortage.
π Definition β Price Ceiling: A government-imposed maximum price set below the market-clearing level, causing a shortage and deadweight loss.
π The deadweight loss is represented by triangles B and C in the diagram.
π Example: When price is regulated to be no higher than Pβ (below equilibrium Pβ), only Qβ units are supplied and demanded. The welfare loss consists of triangles B and C, where triangle B represents lost producer surplus and triangle C represents lost consumer surplus from reduced quantity.
WELFARE LOSS IF PRICE IS HELD ABOVE MARKET-CLEARING LEVEL
When price is regulated to be no lower than Pβ (above equilibrium Pβ), the result is a surplus rather than a shortage. At the higher price, quantity supplied exceeds quantity demanded.
π Definition β Price Floor: A government-imposed minimum price set above the market-clearing level, causing a surplus and deadweight loss.
π The deadweight loss is again given by triangles B and C.
π Example: When price is regulated at Pβ (above Pβ), only Qβ units are demanded while producers want to supply Qβ. The deadweight loss is given by triangles B and C. π‘ Why this matters: If the government purchases the surplus Qβ - Qβ, the deadweight loss expands to include additional inefficiencies.
MINIMUM PRICES
Periodically, government policy seeks to raise prices above market-clearing levels through price floors. This investigation examines a price floor and the minimum wage as key examples.
π Definition β Price Minimum (Price Floor): A legal minimum price set above equilibrium, leading to excess supply and potential government purchase of unsold output.
PRICE MINIMUM
If producers respond to the higher price Pβα΅’β by producing Qβ units, the amount Qβ - Qβ will go unsold. The change in producer surplus is A - C - D, meaning producers may actually be worse off despite the higher price.
π Change in Producer Surplus = A - C - D
π Example: At Pβα΅’β above Pβ, producers increase output from Qβ to Qβ. However, only Qβ is demanded. Area D represents the cost of unsold output. If producers mistakenly produce Qβ, they bear the cost of producing goods nobody buys.
THE MINIMUM WAGE
The minimum wage (wβα΅’β) is a classic example of a price floor applied to the labor market. Firms are not allowed to pay less than wβα΅’β, which results in unemployment.
π Definition β Minimum Wage: A government-set floor on wages above the market-clearing level, causing a surplus of labor (unemployment).
π Deadweight loss = Triangles B and C
π Example: At wβα΅’β above market wage wβ, labor demanded falls from Lβ to Lβ while labor supplied increases from Lβ to Lβ. The difference Lβ - Lβ represents unemployment. Consumer surplus (firms) changes by -A - B, while producer surplus (workers) changes by +A - C. π‘ Why this matters: While some workers benefit from higher wages (area A), others lose jobs (Lβ - Lβ), and the deadweight loss (B + C) represents the efficiency cost of the policy.
AIRLINE REGULATION
During 1976-1981, the airline industry in the U.S. changed dramatically with deregulation leading to major changes. Some airlines merged or went out of business as new airlines entered the industry.
EFFECT OF AIRLINE REGULATION BY THE CIVIL AERONAUTICS BOARD
Before deregulation, the Civil Aeronautics Board (CAB) set prices above market-clearing levels. The diagram shows how price was at Pβα΅’β with Qα΄° = Qβ and QΛ’ = Qβ.
π Definition β Deregulation: The removal of government price controls, allowing market forces to set prices at equilibrium levels.
π Welfare effects of deregulation:
- Consumer surplus: Increases by A + B
- Cost of unsold output: Area D is eliminated
- Producer surplus: Changes by -A + C (completely surrounded by pricing)
π Example: After deregulation, prices fell from Pβα΅’β to Pβ. Consumers gained areas A (from lower prices on existing purchases) and B (from increased quantity). Area D, representing the cost of unsold output under regulation, was eliminated. The overall welfare gain from deregulation was B + C + D.
β Key Takeaways
Both price ceilings (below equilibrium) and price floors (above equilibrium) create deadweight losses represented by triangles B and C in the supply-demand framework. Under price floors like the minimum wage, producers/workers may actually be worse off despite the higher price because they bear the cost of unsold output (area D). The minimum wage causes unemployment equal to the difference between labor supplied and labor demanded at the floor wage. Deregulation of the airline industry eliminated price floors, reducing prices, increasing consumer surplus, and removing the inefficiency of unsold output, yielding an overall welfare gain of B + C + D. The key insight is that government price interventions always create some welfare loss, but the distribution of that loss between consumers and producers depends on whether the price is held above or below the market-clearing level.
π§ Quick Revision Questions
-
What are the two triangles that represent deadweight loss when price is held below market-clearing level, and which surplus (consumer or producer) does each triangle represent?
-
Why might producers actually be worse off under a price floor, even though they receive a higher price per unit?
-
In the minimum wage diagram, what does the distance Lβ - Lβ represent, and what do areas A, B, and C represent in terms of welfare changes?
-
What was the total welfare gain from airline deregulation, and which areas in the diagram represent this gain?
-
How does the deadweight loss differ when the government purchases the surplus (as with agricultural price supports) versus when it does not (as with minimum wage)?
π Lecture 28 β The Analysis of Competitive Markets (Continued)
π Overview: This lecture continues the analysis of government intervention in competitive markets, specifically examining price supports, production quotas, and supply restrictions. It explores how these policies affect consumer surplus, producer surplus, and total welfare, using real-world examples from the wheat market in 1981 and 1985.
ποΈ Topics Covered
This lecture covers price supports and how the government maintains prices by purchasing surplus quantities; the comparison between price supports and production quotas as alternative methods to raise farmers' income; the analysis of supply restrictions and their welfare effects; and import quotas and tariffs used to keep domestic prices above world levels.
π Lecture Summary
PRICE SUPPORTS
To maintain a price above the market-clearing level, the government buys the surplus quantity. When the government sets a support price Pβ, consumer surplus changes by -A - B, and producer surplus changes by A + B + D. The government's cost is the speckled rectangle Pβ(Qβ - Qβ). The total welfare loss is D - (Qβ - Qβ)Pβ.
π Definition β Price Support: A government policy that sets a minimum price for a good above the equilibrium price, with the government purchasing the resulting surplus to maintain that price.
π‘ Why this matters: Price supports can increase producer income but create significant deadweight loss and government expenditure. The lecture asks: Is there a more efficient way to increase farmerβs income by A + B + D?
PRICE SUPPORTS AND PRODUCTION QUOTAS
Production quotas are an alternative approach where the government causes the price to rise by reducing supply rather than purchasing surplus. The lecture uses the taxicab market as an example of controlling entry to restrict supply.
SUPPLY RESTRICTIONS
When supply is restricted to Qβ, the supply curve shifts to S'. Consumer surplus is reduced by A + B. The change in producer surplus is A - C. The deadweight loss is B + C.
When the government maintains Pβ with an incentive program (paying farmers not to produce), the cost to government is B + C + D. The total change in producer surplus becomes A + B + D. The change in consumer and producer surplus is the same as with price supports, but total welfare change = -B - C.
π Example: The lecture compares which policy is more costly: price supports or acreage limitations.
THE WHEAT MARKET IN 1981
In 1981, the market-clearing price was $3.46, and the government set the support price at $3.70. By buying 122 million bushels, the government increased the market-clearing price.
Calculations:
- Consumer loss = A + B
- A = (3.70 - 3.46)(2,566) = $616 million
- B = (1/2)(3.70 - 3.46)(2,630 - 2,566) = $8 million
- Change in consumer surplus: -$624 million
- Cost to government: $3.70 Γ 122 million bushels = $452 million
- Total cost = $624 + 452 = $1,076 million
- Total gain = A + B + C = $638 million
- Government also paid 30 cents/bushel = $806 million
THE WHEAT MARKET IN 1985
In 1985, to increase the price to $3.20, the government bought 466 million bushels and imposed a production quota of 2,425 bushels.
π Example: Government purchase cost = $3.20 Γ 466 = $1,491 million. 80 cent subsidy = 0.80 Γ 2,425 = $1,940 million. Total cost = $3.5 billion.
Import Quotas and Tariffs
Many countries use import quotas and tariffs to keep the domestic price of a product above world levels. In a free market, the domestic price equals the world price P_W. By eliminating imports, the price is increased to P_O. The gain is area A. The loss to consumers is A + B + C, so the deadweight loss is B + C.
When comparing tariffs versus quotas:
- With a tariff, the government gains area D, so the net domestic product loss is B + C
- With a quota, rectangle D becomes part of the profits of foreign producers, and the net domestic loss is B + C + D
π Definition β Import Quota: A limit on the quantity of a good that can be imported, which raises the domestic price above the world price.
π Definition β Tariff: A tax on imported goods that raises the domestic price and generates government revenue.
β Key Takeaways
The most critical concepts from this lecture are the welfare effects of price supports, production quotas, and import restrictions. Price supports maintain prices by government purchase of surpluses, creating consumer loss of A+B and producer gain of A+B+D, with government cost and deadweight loss equal to D minus the purchase cost. Production quotas and supply restrictions achieve similar producer gains but with different cost structuresβacreage limitations with incentive payments cost the government B+C+D. The 1981 and 1985 wheat market examples demonstrate the enormous costs of agricultural price supports, with total costs reaching $3.5 billion in 1985. Import tariffs and quotas both raise domestic prices, but tariffs generate government revenue (D) while quotas transfer that revenue to foreign producers, making tariffs preferable from a domestic welfare perspective.
π§ Quick Revision Questions
- What are the welfare effects (consumer surplus change, producer surplus change, and government cost) when the government implements a price support program?
- In the 1981 wheat market example, how was the total government cost of $1,076 million calculated, and what was the total gain to producers?
- What is the difference in deadweight loss between using an import tariff versus an import quota to achieve the same domestic price increase?
- How does a production quota differ from a price support in terms of government cost and producer surplus change?
- In the supply restriction analysis, why is the deadweight loss equal to B+C when an incentive program is used to maintain price Pβ?
π Lecture 29 β The Analysis of Competitive Markets (Continued)
π Overview: This lecture continues the analysis of competitive markets by examining real-world government interventions. It first explores the economic impact of the U.S. sugar quota, using specific 1997 data to quantify gains and losses. It then introduces a general framework for analyzing the incidence of a specific tax or subsidy, showing how the burden is split between buyers and sellers based on supply and demand elasticities.
ποΈ Topics Covered
The lecture covers the economic analysis of the U.S. sugar quota in 1997, including the calculation of consumer costs, producer gains, foreign producer gains, and deadweight loss. It then shifts to the impact of a specific tax or subsidy, defining key concepts like pass-through fraction and illustrating them with a gasoline tax example. The analysis shows how tax incidence depends on the elasticities of supply and demand.
π Lecture Summary
THE SUGAR QUOTA
The lecture begins by examining the U.S. sugar quota, a form of restricted market. The world price of sugar was as low as 4 cents per pound, while in the U.S. the price was 20-25 cents per pound. In 1997, U.S. production was 15.6 billion pounds, U.S. consumption was 21.1 billion pounds, the U.S. price was 22 cents/pound, and the world price was 11 cents/pound.
The cost of the quotas to consumers was A + B + C + D, or $2.4 billion. The gain to producers was area A, or $1 billion. Rectangle D was the gain to foreign producers who obtained quota allotments, or $600 million. Triangles B and C represent the deadweight loss of $800 million.
π Definition β Deadweight loss: The loss of total surplus (consumer plus producer surplus) that occurs when a market is not in competitive equilibrium, representing the value of trades that do not occur due to the market restriction.
π The total cost to consumers from the quota: A + B + C + D = $2.4 billion π The gain to domestic producers: Area A = $1 billion π The gain to foreign producers: Area D = $600 million π The deadweight loss: B + C = $800 million
π‘ Why this matters: The sugar quota illustrates that while a quota protects domestic producers, it imposes a much larger cost on consumers and creates inefficiency (deadweight loss). Not all of the consumer cost transfers to producers; some goes to inefficient production or foreign quota holders.
THE IMPACT OF A TAX OR SUBSIDY
The burden of a tax (or the benefit of a subsidy) falls partly on the consumer and partly on the producer. This section considers a specific tax, which is a tax of a certain amount of money per unit sold.
When a specific tax is imposed:
- P_b is the price (including the tax) paid by buyers.
- P_S is the price sellers receive, net of the tax.
Buyers lose A + B, sellers lose D + C, and the government earns A + D in revenue. The deadweight loss is B + C.
π Four conditions that must be satisfied after the tax is in place:
- Quantity sold and P_b must be on the demand line: Q_D = Q_D(P_b)
- Quantity sold and P_S must be on the supply line: Q_S = Q_S(P_S)
- Q_D = Q_S
- P_b - P_S = tax
IMPACT OF TAX DEPENDS ON ELASTICITIES OF SUPPLY & DEMAND
The incidence of a tax depends heavily on the elasticities of supply and demand.
THE IMPACT OF A TAX OR SUBSIDY: PASS-THROUGH FRACTION
π Definition β Pass-through fraction: The fraction of a tax that is "passed through" to consumers (i.e., the increase in price buyers pay). The formula is E_S/(E_S - E_d).
π Formula: Pass-through fraction = E_S / (E_S - E_d) β Plain-English meaning: This tells us how much of the tax is borne by the consumer. For example, when demand is perfectly inelastic (E_d = 0), the pass-through fraction is 1, and all the tax is borne by the consumer.
Subsidy: A subsidy can be analyzed in much the same way as a tax. It can be treated as a negative tax. The sellerβs price exceeds the buyerβs price.
With a subsidy (s), the selling price P_b is below the subsidized price P_S so that: s = P_S - P_b.
The benefit of the subsidy depends upon E_d / E_S. If the ratio is small, most of the benefit accrues to the consumer. If the ratio is large, the producer benefits most.
IMPACT OF A $0.50 GASOLINE TAX
This example analyzes a $0.50 per gallon tax on gasoline. The annual revenue from the tax is .50(89) or $44.5 billion. The buyer pays 22 cents of the tax, and the producer pays 28 cents. The deadweight loss is $2.75 billion per year.
π Example: The gasoline tax shows that even with a specific tax, the burden is split. In this case, consumers pay $0.22 and producers pay $0.28 of the $0.50 tax, resulting in a deadweight loss of $2.75 billion annually.
β Key Takeaways
The sugar quota demonstrates that government restrictions create significant costs for consumers (A+B+C+D) and deadweight loss (B+C), while benefiting domestic producers (A) and foreign quota holders (D). The analysis of a specific tax reveals that its burden is always split between buyers and sellers, with the split determined by relative elasticities of supply and demand β the more inelastic side bears more of the tax. The pass-through fraction (E_S/(E_S - E_d)) quantifies the share passed to consumers. In the gasoline tax example, a $0.50 tax resulted in consumers paying $0.22 and producers paying $0.28, generating $44.5 billion in annual revenue but creating a $2.75 billion annual deadweight loss.
π§ Quick Revision Questions
- In the sugar quota analysis, what four components make up the total cost to consumers, and what are their approximate values in billions of dollars?
- What are the four conditions that must be satisfied after a specific tax is imposed on a market?
- If demand is perfectly elastic and supply is normal, who bears the greater burden of a specific tax β the buyer or the seller?
- What does the pass-through fraction equal when demand is perfectly inelastic, and what does this imply about who pays the tax?
- In the gasoline tax example, how much of the $0.50 tax did the buyer pay, what was the annual government revenue, and what was the annual deadweight loss?