π Lecture 1 β Theory of Automata
π Overview: This introductory lecture establishes the fundamental building blocks of automata theory and formal languages. It defines key concepts like alphabets, strings, and words, and introduces the descriptive definition of languages through numerous examples, including important languages like EQUAL, EVEN-EVEN, PALINDROME, and others. Understanding these foundations is critical for analyzing computational problems and designing automata.
ποΈ Topics Covered
The lecture begins by defining automata as "something that works automatically" and distinguishes between formal (syntactic) and informal (semantic) languages. It progresses through definitions of alphabets as finite non-empty sets of symbols, strings as concatenations of letters, and words as strings belonging to a language. The distinction between valid and invalid alphabets is explained using tokenization examples. String length, reverse of a string, and various methods of defining languages are covered, with extensive examples including EQUAL, EVEN-EVEN, INTEGER, EVEN, {aβΏbβΏ}, {aβΏbβΏaβΏ}, factorial, FACTORIAL, DOUBLEFACTORIAL, SQUARE, DOUBLESQUARE, PRIME, and PALINDROME. The lecture concludes with a proof about palindrome counts.
π Lecture Summary
What does automata mean?
It is the plural of automaton, and it means "something that works automatically".
Introduction to languages
There are two types of languages: Formal Languages (Syntactic languages) and Informal Languages (Semantic languages).
Alphabets
π Definition β Alphabet: A finite non-empty set of symbols (called letters), denoted by Ξ£ (Greek letter sigma).
Example: Ξ£ = {a,b}, Ξ£ = {0,1} (important as this is the language which computers understand), Ξ£ = {i,j,k}
Note: Certain version of language ALGOL has 113 letters. Ξ£ (alphabet) includes letters, digits, and a variety of operators including sequential operators such as GOTO and IF.
Strings
π Definition β String: Concatenation of a finite number of letters from the alphabet.
Example: If Ξ£ = {a,b} then strings include a, abab, aaabb, ababababababababab
Note β Empty string or null string: Sometimes a string with no symbol at all is used, denoted by Ξ» (small Greek letter lambda) or Ξ (capital Greek letter lambda), called an empty string or null string. The capital lambda will mostly be used to denote the empty string in further discussion.
Words
π Definition β Word: Words are strings belonging to some language.
Example: If Ξ£ = {x} then a language L can be defined as L = {xβΏ : n = 1,2,3,...} or L = {x, xx, xxx,...}. Here x, xx, ... are the words of L.
Note: All words are strings, but not all strings are words.
Valid/Invalid Alphabets
While defining an alphabet, an alphabet may contain letters consisting of groups of symbols. For example, Ξ£β = {B, aB, bab, d} is a valid alphabet. Now consider Ξ£β = {B, Ba, bab, d} and a string BababB. This string can be tokenized in two different ways: (Ba)(bab)(B) or (B)(abab)(B). The second grouping cannot be identified as a string defined over Ξ£ = {a, b} because when scanned by the compiler (Lexical Analyzer), the first symbol B is identified, but the lexical analyzer cannot identify the second letter, creating ambiguity.
Remarks: While defining an alphabet of letters consisting of more than one symbol, no letter should be started with a letter of the same alphabet (i.e., one letter should not be the prefix of another). However, a letter may end in a letter of the same alphabet.
Conclusion: Ξ£β = {B, aB, bab, d} is a valid alphabet, while Ξ£β = {B, Ba, bab, d} is an invalid alphabet.
Length of Strings
π Definition β Length of a string: The length of string s, denoted by |s|, is the number of letters in the string.
Example 1: Ξ£ = {a,b}, s = ababa, |s| = 5
Example 2: Ξ£ = {B, aB, bab, d}, s = BaBbabBd, Tokenizing = (B)(aB)(bab)(B)(d), |s| = 5
Reverse of a String
π Definition β Reverse of a string: The reverse of a string s, denoted by Rev(s) or sΚ³, is obtained by writing the letters of s in reverse order.
Example 1: If s = abc defined over Ξ£ = {a,b,c}, then Rev(s) or sΚ³ = cba
Example 2: Ξ£ = {B, aB, bab, d}, s = BaBbabBd, Rev(s) = dBbabaBB
Defining Languages
Languages can be defined in different ways: Descriptive definition, Recursive definition, using Regular Expressions (RE), and using Finite Automaton (FA), etc.
Descriptive Definition of Language
The language is defined by describing the conditions imposed on its words.
Example 1: The language L of strings of odd length, defined over Ξ£ = {a}, can be written as L = {a, aaa, aaaaa, ...}
Example 2: The language L of strings that do not start with a, defined over Ξ£ = {a,b,c}, can be written as L = {Ξ, b, c, ba, bb, bc, ca, cb, cc, ...}
Example 3: The language L of strings of length 2, defined over Ξ£ = {0,1,2}, can be written as L = {00, 01, 02, 10, 11, 12, 20, 21, 22}
Example 4: The language L of strings ending in 0, defined over Ξ£ = {0,1}, can be written as L = {0, 00, 10, 000, 010, 100, 110, ...}
Example 5: The language EQUAL, of strings with number of a's equal to number of b's, defined over Ξ£ = {a,b}, can be written as {Ξ, ab, ba, aabb, abab, baba, abba, ...}
Example 6: The language EVEN-EVEN, of strings with even number of a's and even number of b's, defined over Ξ£ = {a,b}, can be written as {Ξ, aa, bb, aaaa, aabb, abab, abba, baab, baba, bbaa, bbbb, ...}
Example 7: The language INTEGER, of strings defined over Ξ£ = {-,0,1,2,3,4,5,6,7,8,9}, can be written as INTEGER = {..., -2, -1, 0, 1, 2, ...}
Example 8: The language EVEN, of strings defined over Ξ£ = {-,0,1,2,3,4,5,6,7,8,9}, can be written as EVEN = {..., -4, -2, 0, 2, 4, ...}
Example 9: The language {aβΏbβΏ}, of strings defined over Ξ£ = {a,b}, as {aβΏbβΏ : n = 1,2,3,...}, can be written as {ab, aabb, aaabbb, aaaabbbb, ...}
Example 10: The language {aβΏbβΏaβΏ}, of strings defined over Ξ£ = {a,b}, as {aβΏbβΏaβΏ : n = 1,2,3,...}, can be written as {aba, aabbaa, aaabbbaaa, aaaabbbbaaaa, ...}
Example 11: The language factorial, of strings defined over Ξ£ = {0,1,2,3,4,5,6,7,8,9}, i.e., {1, 2, 6, 24, 120, ...}
Example 12: The language FACTORIAL, of strings defined over Ξ£ = {a}, as {aβΏ! : n = 1,2,3,...}, can be written as {a, aa, aaaaaa, ...}. Note that the language FACTORIAL can be defined over any single letter alphabet.
Example 13: The language DOUBLEFACTORIAL, of strings defined over Ξ£ = {a, b}, as {aβΏ! bβΏ! : n = 1,2,3,...}, can be written as {ab, aabb, aaaaaabbbbbb, ...}
Example 14: The language SQUARE, of strings defined over Ξ£ = {a}, as {aβΏΒ² : n = 1,2,3,...}, can be written as {a, aaaa, aaaaaaaaa, ...}
Example 15: The language DOUBLESQUARE, of strings defined over Ξ£ = {a, b}, as {aβΏΒ² bβΏΒ² : n = 1,2,3,...}, can be written as {ab, aaaabbbb, aaaaaaaaabbbbbbbbb, ...}
Example 16: The language PRIME, of strings defined over Ξ£ = {a}, as {aα΅ : p is prime}, can be written as {aa, aaa, aaaaa, aaaaaaa, aaaaaaaaaaa, ...}
An Important Language β PALINDROME
The language consisting of Ξ and the strings s defined over Ξ£ such that Rev(s) = s. The words of PALINDROME are called palindromes.
Example: For Ξ£ = {a,b}, PALINDROME = {Ξ, a, b, aa, bb, aaa, aba, bab, bbb, ...}
Remark: There are as many palindromes of length 2n as there are of length 2n-1.
To prove this remark, note the following: Number of strings of length 'm' defined over an alphabet of 'n' letters is nα΅.
Example: The language of strings of length 2 defined over Ξ£ = {a,b} is L = {aa, ab, ba, bb}, i.e., number of strings = 2Β² = 4. The language of strings of length 3 defined over Ξ£ = {a,b} is L = {aaa, aab, aba, baa, abb, bab, bba, bbb}, i.e., number of strings = 2Β³ = 8.
To calculate the number of palindromes of length 2n: Consider a palindrome of length 2n. The first n letters can be any string of length n (there are 2βΏ such strings), and the last n letters are determined as the reverse of the first n. Therefore, the number of palindromes of length 2n = 2βΏ.
To calculate the number of palindromes of length (2n-1) with 'a' as the middle letter: There are as many palindromes of length 2n-1 as there are strings of length n-1 (the left half). So the number = 2βΏβ»ΒΉ. Similarly, the number of palindromes of length 2n-1 with 'b' as middle letter is also 2βΏβ»ΒΉ. Hence, the total number of palindromes of length 2n-1 = 2βΏβ»ΒΉ + 2βΏβ»ΒΉ = 2(2βΏβ»ΒΉ) = 2βΏ.
This proves that the number of palindromes of length 2n equals the number of palindromes of length 2n-1, which is 2βΏ.
π‘ Why this matters: This counting principle shows the structural symmetry of palindromes and is useful for understanding the growth of language sizes.
β Key Takeaways
The most critical concept from this lecture is that an alphabet is a finite non-empty set of symbols, and languages are sets of strings (words) formed from that alphabet. The distinction between valid and invalid alphabets hinges on whether any letter is a prefix of another letter, which would cause tokenization ambiguity. Languages can be defined descriptively by stating conditions on their words, as shown through numerous examples like EQUAL, EVEN-EVEN, and PALINDROME. For PALINDROME, the number of palindromes of length 2n equals the number of palindromes of length 2n-1, both equal to 2βΏ. Finally, the null string (Ξ) is a valid string and may or may not belong to a given language.
π§ Quick Revision Questions
- What is an alphabet, and what is the notation used to represent it?
- Why is Ξ£β = {B, Ba, bab, d} considered an invalid alphabet? Explain the ambiguity in tokenizing the string BababB.
- Define the reverse of a string. If s = BaBbabBd defined over Ξ£ = {B, aB, bab, d}, what is Rev(s)?
- List the first five words of the language PALINDROME defined over Ξ£ = {a, b} that have length 4 or less.
- Prove that the number of palindromes of length 2n is equal to the number of palindromes of length 2n-1 when defined over an alphabet of two letters.
π Lecture 2 β Summary
π Overview: This lecture introduces fundamental operations and definitions for constructing formal languages. It covers Kleene Star Closure and Plus operations, provides the recursive definition method for specifying languages, and presents multiple examples of defining specific languages like INTEGER, EVEN, PALINDROME, and languages with particular string properties.
ποΈ Topics Covered
The lecture covers Kleene Star Closure and its application to alphabets and sets of strings, the Plus operation as a variant of Kleene Star that excludes the null string, the three-step recursive definition process for defining languages, and numerous examples including INTEGER, EVEN, factorial, PALINDROME, {aβΏbβΏ}, and languages of strings ending in a, beginning and ending with same letters, containing aa or bb, and containing exactly one a.
π Lecture Summary
Kleene Star Closure
Given Ξ£, then the Kleene Star Closure of the alphabet Ξ£, denoted by Ξ£*, is the collection of all strings defined over Ξ£, including Ξ. It is to be noted that Kleene Star Closure can be defined over any set of strings.
π Definition β Kleene Star Closure (Ξ£*): The set of all possible strings (including the empty string Ξ) that can be formed from a given alphabet or set of strings.
π Formula: Ξ£* = {Ξ} βͺ Ξ£ βͺ Σ² βͺ Σ³ βͺ ... β all finite-length strings including empty string
π Example: If Ξ£ = {0,1}, then Ξ£* = {Ξ, 0, 1, 00, 01, 10, 11, ....}
Note: Languages generated by Kleene Star Closure of set of strings are infinite languages. (By infinite language, it is supposed that the language contains infinite many words, each of finite length).
PLUS Operation (+)
Plus Operation is same as Kleene Star Closure except that it does not generate Ξ (null string), automatically.
π Definition β Plus Operation (Ξ£+): The set of all non-empty strings that can be formed from a given alphabet or set of strings.
π Formula: Ξ£+ = Ξ£ βͺ Σ² βͺ Σ³ βͺ ... β all finite-length strings excluding empty string
π Example: If Ξ£ = {0,1}, then Ξ£+ = {0, 1, 00, 01, 10, 11, ....}
Remark: It is to be noted that Kleene Star can also be operated on any string i.e. a* can be considered to be all possible strings defined over {a}, which shows that a* generates Ξ, a, aa, aaa, ... It may also be noted that a+ generates a, aa, aaa, aaaa, ...
Recursive definition of languages
The following three steps are used in recursive definition: Some basic words are specified in the language. Rules for constructing more words are defined in the language. No strings except those constructed in above, are allowed to be in the language.
Defining language of INTEGER
Step 1: 1 is in INTEGER. Step 2: If x is in INTEGER then x+1 and x-1 are also in INTEGER. Step 3: No strings except those constructed in above, are allowed to be in INTEGER.
Defining language of EVEN
Step 1: 2 is in EVEN. Step 2: If x is in EVEN then x+2 and x-2 are also in EVEN. Step 3: No strings except those constructed in above, are allowed to be in EVEN.
Defining the language factorial
Step 1: As 0!=1, so 1 is in factorial. Step 2: n! = n*(n-1)! is in factorial. Step 3: No strings except those constructed in above, are allowed to be in factorial.
Defining the language PALINDROME, defined over Ξ£ = {a,b}
Step 1: a and b are in PALINDROME Step 2: if x is palindrome, then s(x)Rev(s) and xx will also be palindrome, where s belongs to Ξ£* Step 3: No strings except those constructed in above, are allowed to be in palindrome
Defining the language {aβΏbβΏ}, n=1,2,3,..., of strings defined over Ξ£={a,b}
Step 1: ab is in {aβΏbβΏ} Step 2: if x is in {aβΏbβΏ}, then axb is in {aβΏbβΏ} Step 3: No strings except those constructed in above, are allowed to be in {aβΏbβΏ}
π‘ Why this matters: The language {aβΏbβΏ} is a classic example of a non-regular language β it cannot be recognized by a finite automaton, making it a crucial benchmark in automata theory.
Defining the language L, of strings ending in a, defined over Ξ£={a,b}
Step 1: a is in L Step 2: if x is in L then s(x) is also in L, where s belongs to Ξ£* Step 3: No strings except those constructed in above, are allowed to be in L
Defining the language L, of strings beginning and ending in same letters, defined over Ξ£={a, b}
Step 1: a and b are in L Step 2: (a)s(a) and (b)s(b) are also in L, where s belongs to Ξ£* Step 3: No strings except those constructed in above, are allowed to be in L
Defining the language L, of strings containing aa or bb, defined over Ξ£={a, b}
Step 1: aa and bb are in L Step 2: s(aa)s and s(bb)s are also in L, where s belongs to Ξ£* Step 3: No strings except those constructed in above, are allowed to be in L
Defining the language L, of strings containing exactly one a, defined over Ξ£={a, b}
Step 1: a is in L Step 2: s(a)s is also in L, where s belongs to b* Step 3: No strings except those constructed in above, are allowed to be in L
β Key Takeaways
The Kleene Star Closure Ξ£* generates all possible strings including the empty string Ξ, while the Plus operation Ξ£+ generates all non-empty strings. Recursive definition of languages follows three essential steps: specifying basic words, providing construction rules, and restricting to only strings built from those rules. The choice of basic words and construction rules in step 1 and step 2 determines the language properties β for example, ending with 'a', beginning and ending with same letter, or containing exactly one 'a'. The Plus operation can be expressed as Ξ£+ = Ξ£* - {Ξ}, making it a restricted version of Kleene Star.
π§ Quick Revision Questions
- What is the difference between Kleene Star Closure and Plus operation regarding the empty string Ξ?
- What are the three steps in the recursive definition of a language?
- How would you define the language {aβΏbβΏ} recursively?
- If Ξ£ = {aaB, c}, list the first four strings in Ξ£+ (excluding Ξ).
- In the recursive definition of strings containing exactly one 'a', why is s restricted to b* in step 2?
π Lecture 3 β Theory of Automata
π Overview: This lecture introduces regular expressions (RE) as a formal way to describe languages, along with their recursive definition. It demonstrates how to construct REs for various languages, including those with specific constraints like containing certain letters, having specific lengths, or starting/ending with particular symbols.
ποΈ Topics Covered
Regular Expression, Recursive definition of RE, defining languages by RE, {x}, {x}+, {a+b}, Language of strings having exactly one a, Language of strings of even length, Language of strings of odd length, RE defines unique language (as Remark), Language of strings having at least one a, Language of strings having at least one a and one b, Language of strings starting with aa and ending in bb, Language of strings starting with and ending in different letters.
π Lecture Summary
Regular Expression
As discussed earlier that a* generates Ξ, a, aa, aaa, ... and a+ generates a, aa, aaa, aaaa, ..., so the language Lβ = {Ξ, a, aa, aaa, ...} and Lβ = {a, aa, aaa, aaaa, ...} can simply be expressed by a* and a+, respectively. a* and a+ are called the regular expressions (RE) for Lβ and Lβ respectively.
π Definition β Regular Expression (RE): A formal notation used to describe a language by combining symbols from an alphabet using operators like concatenation, union (+), and Kleene star (*).
π Example: Note that a+, aa*, and a*a all generate the same language Lβ = {a, aa, aaa, aaaa, ...}.
Recursive definition of Regular Expression (RE)
Step 1: Every letter of Ξ£ including Ξ is a regular expression.
Step 2: If rβ and rβ are regular expressions then (rβ), rβ rβ (concatenation), rβ + rβ (union), and rβ* (Kleene star) are also regular expressions.
Step 3: Nothing else is a regular expression.
π Definition β Recursive definition: A definition that builds complex objects from simpler ones using a base case (Step 1) and a recursive step (Step 2), with a closure condition (Step 3).
Method 3 (Regular Expressions)
Consider the language L={Ξ, x, xx, xxx,...} of strings, defined over Ξ£ = {x}. We can write this language as the Kleene star closure of alphabet Ξ£ or L=Ξ£*={x}. This language can also be expressed by the regular expression x.
Similarly the language L={x, xx, xxx,...}, defined over Ξ£ = {x}, can be expressed by the regular expression x+.
Now consider another language L, consisting of all possible strings, defined over Ξ£ = {a, b}. This language can also be expressed by the regular expression (a + b)*.
Now consider another language L, of strings having exactly one a, defined over Ξ£ = {a, b}, then its regular expression may be bab.
Now consider another language L, of even length, defined over Ξ£ = {a, b}, then its regular expression may be ((a+b)(a+b))*.
Now consider another language L, of odd length, defined over Ξ£ = {a, b}, then its regular expression may be (a+b)((a+b)(a+b))* or ((a+b)(a+b))*(a+b).
π Definition β Kleene star closure: The set of all possible strings (including Ξ) that can be formed by concatenating zero or more strings from a given alphabet.
π Formula: (a+b)* β The set of all strings of any length over {a, b} π Formula: (a+b)((a+b)(a+b))* β The set of all strings of odd length over {a, b}
π‘ Why this matters: Understanding how to translate a language description into a regular expression is fundamental for pattern matching and lexical analysis in compilers.
Remark
It may be noted that a language may be expressed by more than one regular expression, while given a regular expression there exists a unique language generated by that regular expression.
Example
Consider the language, defined over Ξ£ = {a , b} of words having at least one a, may be expressed by a regular expression (a+b)a(a+b).
Consider the language, defined over Ξ£ = {a, b} of words having at least one a and one b, may be expressed by a regular expression (a+b)*a(a+b)b(a+b) + (a+b)*b(a+b)a(a+b).
Consider the language, defined over Ξ£ ={a, b}, of words starting with double a and ending in double b then its regular expression may be *aa(a+b)bb.
Consider the language, defined over Ξ£ ={a, b} of words starting with a and ending in b OR starting with b and ending in a, then its regular expression may be **a(a+b)b + b(a+b)a.
β Key Takeaways
Regular expressions are a powerful notation to describe languages, defined recursively using base alphabet symbols and operations of concatenation, union (+), and Kleene star (). A language can have multiple regular expressions, but each RE defines exactly one unique language. Key patterns include: (a+b) for all strings over {a,b}, bab for exactly one a, ((a+b)(a+b))* for even length strings, and (a+b)((a+b)(a+b))* for odd length strings. For constraints like "at least one a" use (a+b)a(a+b), and for "starting with aa and ending in bb" use aa(a+b)*bb.
π§ Quick Revision Questions
- What are the three steps in the recursive definition of a regular expression?
- Write a regular expression for the language of all strings over {a,b} that have exactly one b.
- What is the difference between (a+b)* and (a+b)+ in terms of the strings they generate?
- Why can a language have more than one regular expression, but a regular expression defines only one language?
- Write a regular expression for the language of all strings over {a,b} that start and end with different letters.
π Lecture 4 β Theory of Automata
π Overview: This lecture covers the EVEN-EVEN language and its regular expression, the critical difference between
a*+b*and(a+b)*, and the formal definition of regular expressions and regular languages. It introduces the concept of finite automaton (FA) as a computational model, including its definition, transition table, and transition diagram.
ποΈ Topics Covered
The lecture begins with the regular expression of the EVEN-EVEN language, then clarifies the difference between a*+b* and (a+b)*. It defines equivalent regular expressions and demonstrates sum, product, and closure operations on regular expressions. The concept of regular languages is introduced, with the note that all finite languages are regular. Finally, the lecture introduces finite automaton, providing its formal definition, a transition table example, and a transition diagram.
π Lecture Summary
An important example
The language EVEN-EVEN is defined over Ξ£={a, b} and contains strings having an even number of a's and an even number of b's. Its strings include {Ξ, aa, bb, aaaa, aabb, abab, abba, baab, baba, bbaa, bbbb,...}. The regular expression for EVEN-EVEN is: (aa+bb+(ab+ba)(aa+bb)(ab+ba))
π‘ Why this matters: This is a classic example of a non-trivial regular language that requires careful construction of the regular expression.
Note
It is important to be clear about the difference between the following regular expressions:
- rβ = a+b** generates strings that are either all a's or all b's (no mixing).
- rβ = (a+b)* generates strings consisting of any concatenation of a and b (including mixed strings). Here rβ does not generate any string that is a concatenation of a and b, while rβ generates such strings.
π Definition β Difference between a+b and (a+b)**: a+b* generates only strings of all a's or all b's, while (a+b)* generates any string of a's and b's.
Equivalent Regular Expressions
π Definition β Equivalent Regular Expressions: Two regular expressions are said to be equivalent if they generate the same language.
π Example: Consider rβ = (a + b)* (aa + bb) and rβ = (a + b)*aa + (a + b)*bb. Both regular expressions define the language of strings ending in aa or bb.
Note
If rβ = (aa + bb) and rβ = (a + b) then:
- rβ + rβ = (aa + bb) + (a + b)
- rβ rβ = (aa + bb)(a + b) = (aaa + aab + bba + bbb)
- (rβ)* = (aa + bb)*
Regular Languages
π Definition β Regular Language: The language generated by any regular expression is called a regular language.
It is to be noted that if rβ, rβ are regular expressions, corresponding to the languages Lβ and Lβ, then the languages generated by rβ + rβ, rβ rβ (or rβ rβ), and rβ* (or rβ*) are also regular languages.
π Definition β Operations on Regular Languages: If Lβ and Lβ are expressed by rβ and rβ respectively, then:
- The language expressed by rβ + rβ is Lβ βͺ Lβ
- The language expressed by rβ rβ is Lβ Lβ, strings obtained by prefixing every string of Lβ with every string of Lβ
- The language expressed by rβ* is Lβ*, strings obtained by concatenating strings of L, including the null string
π Example: If rβ = (aa+bb) and rβ = (a+b), then the language generated by rβ+rβ is regular, expressed by (aa+bb) + (a+b). The language generated by rβ rβ is regular, expressed by (aa+bb)(a+b). The language generated by r* (where r = aa+bb) is regular, expressed by (aa+bb)*.
All finite languages are regular
π Example: Consider the language L, defined over Ξ£={a,b}, of strings of length 2, starting with a. Then L = {aa, ab}, which may be expressed by the regular expression aa+ab. Hence L, by definition, is a regular language.
It may be noted that if a language contains even a thousand words, its RE may be expressed by placing '+' between all the words. The special structure of RE is not important here.
π Example: Consider L = {aaa, aab, aba, abb, baa, bab, bba, bbb}, which may be expressed by RE aaa+aab+aba+abb+baa+bab+bba+bbb, which is equivalent to (a+b)(a+b)(a+b).
Introduction to Finite Automaton
A finite automaton is introduced using a game board analogy with 64 boxes, pieces of paper (white and black), a finite number of arrangements, a pair of dice generating numbers 2-12, and transition rules among arrangements. Winning depends on the sequence of numbers generated.
Method 4 (Finite Automaton)
π Definition β Finite Automaton (FA): A collection of:
- Finite number of states, having one initial and some (maybe none) final states
- Finite set of input letters (Ξ£) from which input strings are formed
- Finite set of transitions: for each state and for each input letter, there is a transition showing how to move from one state to another
π Example: Ξ£ = {a,b}, States: x, y, z where x is an initial state and z is a final state. Transitions:
- At state x reading a, go to state z
- At state x reading b, go to state y
- At state y reading a or b, go to state y
- At state z reading a or b, go to state z
Transition Table:
| Old States | Reading a | Reading b |
|---|---|---|
| x- | z | y |
| y | y | y |
| z+ | z | z |
Transition Diagram:
b a,b
x- βββββββββββΊ y
β β²
β β
βa βa,b
βΌ β
z+ ββββββββ
This FA accepts the language of strings, defined over Ξ£={a,b}, starting with a. This language may be expressed by the regular expression a(a+b)*.
π‘ Why this matters: Finite automata provide a visual and mathematical model for regular languages, connecting regular expressions to state machines.
β Key Takeaways
The EVEN-EVEN language has a specific regular expression that ensures both a's and b's counts are even, demonstrating a non-trivial pattern. The critical distinction between a*+b* (only homogeneous strings) and (a+b)* (any string of a and b) must be understood. Regular languages are closed under sum, product, and Kleene star, and all finite languages are regular. The finite automaton is formally defined with states, input letters, and transitions, and can be represented by a transition table or diagram. The example FA shows that language "starting with a" corresponds to the regular expression a(a+b)*.
π§ Quick Revision Questions
- Write the regular expression for the EVEN-EVEN language over {a,b}.
- What is the difference between a*+b* and (a+b)*?
- When are two regular expressions considered equivalent?
- If rβ and rβ are regular expressions for languages Lβ and Lβ, what languages are expressed by rβ+rβ, rβrβ, and rβ*?
- In the FA example given, which state is initial and which is final?
π Lecture 5 β Theory of Automata
π Overview: This lecture explores different notations for transition diagrams and finite automata, focusing on how to design FAs that accept languages with specific patterns such as strings of even length, odd length, strings starting with b, ending in a, not beginning with b, and those beginning and ending with the same letters. Understanding these core patterns is essential for building intuition about how regular languages are recognized by finite automata.
ποΈ Topics Covered
The lecture covers different notations of transition diagrams, including the labeling of initial and final states and the optional naming of states. It then presents several examples of finite automata: one accepting strings of even length, one accepting strings starting with b, one for strings ending in a, one for strings beginning with a, one for strings not beginning with b, and finally one for strings of length two or more beginning and ending in the same letters. The lecture also discusses the important principle that multiple FAs can accept the same language but a given FA accepts only one unique language.
π Lecture Summary
Different notations of transition diagrams, languages of strings of even length, Odd length, starting with b, ending in a, beginning with b, not beginning with b, beginning and ending in same letters
It may be noted that to indicate the initial state, an arrow head can also be placed before that state and that the final state is indicated with a double circle, as shown below. It is also to be noted that while expressing an FA by its transition diagram, the labels of states are not necessary.
Example
Ξ£ = {a,b} States: x, y, where x is both initial and final state. Transitions: At state x reading a or b go to state y. At state y reading a or b go to state x.
These transitions can be expressed by the following transition table:
| Old States | New States Reading a | New States Reading b |
|---|---|---|
| xΒ± | y | y |
| y | x | x |
It may be noted that the above transition table may be depicted by the following transition diagram.
The above transition diagram is an FA accepting the language of strings, defined over Ξ£={a, b} of even length. It may be noted that this language may be expressed by the regular expression ((a+ b) (a + b))*
Example:
Consider the language L of strings, defined over Ξ£={a, b}, starting with b. The language L may be expressed by RE b(a + b)* , may be accepted by the following FA
Example
Consider the language L of strings, defined over Ξ£={a, b}, ending in a. The language L may be expressed by RE (a+b)*a.
This language may be accepted by the FA shown aside
There may be another FA corresponding to the given language, as shown aside
Note
It may be noted that corresponding to a given language there may be more than one FA accepting that language, but for a given FA there is a unique language accepted by that FA. It is also to be noted that given the languages Lβ and Lβ ,where Lβ = The language of strings, defined over Ξ£ ={a, b}, beginning with a. Lβ = The language of strings, defined over Ξ£ ={a, b}, not beginning with b The Ξ does not belong to Lβ while it does belong to Lβ . This fact may be depicted by the corresponding transition diagrams of Lβ and Lβ.
FAβ Corresponding to Lβ The language Lβ may be expressed by the regular expression a(a + b)*
FAβ Corresponding to Lβ The language Lβ may be expressed by the regular expression a(a + b)* + Ξ
Example
Consider the Language L of Strings of length two or more, defined over Ξ£ = {a, b}, beginning with and ending in same letters. The language L may be expressed by the following regular expression a(a + b)*a + b(a + b)*b It is to be noted that if the condition on the length of string is not imposed in the above language then the strings a and b will then belong to the language.
This language L may be accepted by the FA as shown aside
β Key Takeaways
The most critical points from this lecture are that a finite automaton can be represented without labeling its states, but the initial and final states must always be clearly marked. The language of strings of even length is accepted by a simple two-state FA where the final state is also the initial state. For languages like "ending in a" or "starting with b," the FA must ensure that only strings satisfying the condition reach the final state. A crucial insight is that multiple different FAs can accept the same language, but a given FA defines exactly one unique language. Finally, when defining a language like "beginning and ending with the same letter," the condition on string length (e.g., length two or more) must be carefully considered, as it affects whether single-character strings like "a" and "b" are included.
π§ Quick Revision Questions
- What is the regular expression for the language of strings of even length over Ξ£ = {a, b}?
- In the FA for strings ending in 'a', what happens if the FA is in the final state and reads a 'b'?
- Why does the empty string Ξ belong to the language of strings "not beginning with b" but not to the language of strings "beginning with a"?
- What is the main difference between the FA for "beginning with a" and the FA for "not beginning with b"?
- How would you modify the FA for strings beginning and ending with the same letter to also accept the single-character strings "a" and "b"?
π Lecture 6 β Theory of Automata
π Overview: This lecture explores Finite Automata (FA) for various languages, including strings beginning and ending in different letters, languages accepting all strings or no strings, and languages containing specific patterns like double letters or triple letters. It also introduces the concept of equivalent FAs and the EVEN-EVEN language, demonstrating how regular expressions correspond to FA designs.
ποΈ Topics Covered
The lecture covers examples of FA for languages beginning with and ending in different letters, accepting all strings including Ξ, accepting non-empty strings, accepting no strings (empty language), containing double aβs, containing double 0βs or double 1βs, containing triple aβs or triple bβs, and the EVEN-EVEN language. It also discusses equivalent FAs that accept the same language.
π Lecture Summary
Example
Consider the Language L of Strings, defined over Ξ£ = {a, b}, beginning with and ending in different letters. The language L may be expressed by the following regular expression a(a + b)*b + b(a + b)*a. This language may be accepted by the following FA with states 1β, 2, 3, 4+, and 5+. The FA has transitions: from 1β on 'a' to 2, from 1β on 'b' to 3; from 2 on 'a' to 2, from 2 on 'b' to 4+; from 3 on 'a' to 5+, from 3 on 'b' to 3; from 4+ on 'a' to 2, from 4+ on 'b' to 4+; from 5+ on 'a' to 5+, from 5+ on 'b' to 3.
Example
Consider the Language L, defined over Ξ£ = {a, b} of all strings including Ξ. The language L may be accepted by the following FA with a single state that is both initial and final, with self-loops for 'a' and 'b'. The language L may also be accepted by the following FA with a single initial and final state and self-loops for 'a' and 'b'. The language L may be expressed by the regular expression (a + b)*.
Example
Consider the Language L, defined over Ξ£ = {a, b} of all non empty strings. The language L may be accepted by the following FA with two states: state 1β as initial (non-final) and state 2+ as final, with transitions from 1β on 'a' and 'b' both to 2+, and from 2+ on 'a' and 'b' both to 2+. The above language may be expressed by the regular expression (a + b)+.
Example
Consider the following FA, defined over Ξ£ = {a, b} with a single state 1β that is initial but not final, and a self-loop on 'a' and 'b'. It is to be noted that the above FA does not accept any string, even it does not accept the null string; as there is no path starting from initial state and ending in final state.
Equivalent FAs
It is to be noted that two FAs are said to be equivalent, if they accept the same language, as shown in the following FAs: FA1, FA2, and FA3. Note: FA1 has already been discussed, while in FA2, there is no final state and in FA3, there is a final state but FA3 is disconnected as the states 2 and 3 are disconnected. It may also be noted that the language of strings accepted by FA1, FA2 and FA3 is denoted by the empty set i.e. { } OR Γ.
π Definition β Equivalent FAs: Two FAs are said to be equivalent if they accept the same language.
Example
Consider the Language L of strings, defined over Ξ£ = {a, b}, containing double a. The language L may be expressed by the regular expression (a+b)(aa)(a+b). This language may be accepted by the following FA with states: 1β, 2, 3+. The FA has transitions: from 1β on 'a' to 2, from 1β on 'b' to 1β; from 2 on 'a' to 3+, from 2 on 'b' to 1β; from 3+ on 'a' to 3+, from 3+ on 'b' to 3+.
π‘ Why this matters: This FA remembers if it has seen one 'a' (state 2) and then accepts once a second 'a' appears (state 3+).
Example
Consider the language L of strings, defined over Ξ£={0, 1}, having double 0βs or double 1βs. The language L may be expressed by the regular expression (0+1)(00 + 11)(0+1). This language may be accepted by the following FA with states: β (initial), x, y, and + (final). The FA has transitions: from β on '0' to x, from β on '1' to y; from x on '0' to +, from x on '1' to y; from y on '0' to x, from y on '1' to +; from + on '0' and '1' both back to +.
Example
Consider the language L of strings, defined over Ξ£={a, b}, having triple aβs or triple bβs. The language L may be expressed by RE (a+b)(aaa + bbb)(a+b). This language may be accepted by the FA with states: 1β, 2, 3, 4, 5, and 6+. The FA has transitions: from 1β on 'a' to 2, from 1β on 'b' to 3; from 2 on 'a' to 4, from 2 on 'b' to 3; from 3 on 'a' to 2, from 3 on 'b' to 5; from 4 on 'a' to 6+, from 4 on 'b' to 3; from 5 on 'a' to 2, from 5 on 'b' to 6+; from 6+ on 'a' to 6+, from 6+ on 'b' to 6+.
Example
Consider the EVEN-EVEN language, defined over Ξ£ = {a, b}. As discussed earlier that EVEN-EVEN language can be expressed by the regular expression (aa+bb+(ab+ba)(aa+bb)(ab+ba)). EVEN-EVEN language may be accepted by the FA with states: 1Β±, 2, 3, and 4. The FA has transitions: from 1Β± on 'a' to 2, from 1Β± on 'b' to 3; from 2 on 'a' to 1Β±, from 2 on 'b' to 4; from 3 on 'a' to 4, from 3 on 'b' to 1Β±; from 4 on 'a' to 3, from 4 on 'b' to 2.
π Definition β EVEN-EVEN language: The language of strings over Ξ£={a,b} where the number of 'a's is even and the number of 'b's is even.
β Key Takeaways
Students must remember that FAs can be designed for various languages by creating states that track the necessary "memory" of the input seen so far. A language accepting all strings (including Ξ) uses a single accepting state, while the language of non-empty strings requires the initial state to be non-final. Equivalent FAs accept the same language, and the FA with no path to a final state accepts the empty language. For pattern languages like double or triple letters, states are used to count consecutive occurrences until the pattern is found, after which all subsequent inputs lead to a final trap state.
π§ Quick Revision Questions
- What regular expression represents the language of strings beginning with and ending in different letters over {a,b}?
- How many states are needed in an FA to accept all strings including the null string?
- What does it mean for two FAs to be equivalent?
- Describe the state transitions for an FA that accepts strings containing "aa" over {a,b}.
- How many states are in the FA for the EVEN-EVEN language, and what do they represent?
π Lecture 7 β FA Corresponding to Finite Languages, Transition Graphs
π Overview: This lecture demonstrates methods for constructing Finite Automata that accept finite languages, using both a direct state-transition approach and a tree structure method. It also introduces Transition Graphs (TGs) as a more generalized model that allows transitions on substrings including the null string. Understanding these constructions is fundamental for building automata from regular expressions and finite language specifications.
ποΈ Topics Covered
The lecture covers building FA for finite languages using the tree method and direct state labeling, with multiple examples including languages with specific ending conditions. It concludes with the formal definition and properties of Transition Graphs (TGs) , which extend FA by permitting transitions on arbitrary substrings.
π Lecture Summary
FA corresponding to finite languages
The lecture begins by showing how to construct an FA for the finite language L = {Ξ, b, ab, bb} over Ξ£ = {a, b}, expressed as Ξ + b + ab + bb. The FA is built with states that include Dead States (also called Waste Baskets or Davey John Lockers), which are states that once entered cannot be exited. The FA includes a start state (1Β±), final states (2+, 4+, 5+), and dead states (x, y) to handle all possible transitions.
π Definition β Dead State: A state from which there is no possible transition to any other state; once entered, the automaton can never leave it. π Example: In the FA for L = {Ξ, b, ab, bb}, state x and state y are dead states. If the input string contains an 'a' from state 2 or a 'b' from state 3, the automaton goes to a dead state and will never reach a final state.
π‘ Why this matters: Dead states are essential for building complete FA that process all possible input strings, ensuring the automaton is deterministic and well-defined for every input.
Tree Structure Method for Building FA
The tree structure method is introduced as an alternative approach for constructing FA, especially useful for languages with a small number of strings. For the language L = {Ξ, b, ab, bb}, a tree is built starting from the start state (1Β±), with branches for each possible string. Each complete string ends at a final state, and additional dead state transitions are added to handle all other input possibilities.
π Example: The tree for L = {Ξ, b, ab, bb} starts at state 1Β±. From there:
- On Ξ (empty string): state 1 is already final
- On 'b': go to state 2+ (final)
- On 'a' then 'b': go from 1 to 3 to 4+ (final)
- On 'b' then 'b': go from 1 to 2 to 5+ (final) All other transitions (e.g., a from 2, a from 4, a from 5, b from 3, etc.) go to dead states (6, 7, 8, x).
Example: Language L = {aa, bab, aabb, bbba}
This language over Ξ£ = {a, b} is expressed as aa + bab + aabb + bbba. The corresponding FA is built with multiple paths: from start state 1β, going to state 2 on 'a', then to state 3+ on 'a' (final). For 'bab', the path is 1β β 4 β 5 β 6+. For 'aabb': 1β β 2 β 7 β 8 β 9+. For 'bbba': 1β β 10 β 6 β 11+ β y (final). All other transitions go to dead state y.
π Example: String "aa" is accepted: start at 1β, read 'a' β go to 2, read 'a' β go to 3+ (final state). String "aab" is rejected: start at 1β, read 'a' β 2, read 'a' β 7 (waiting state for "aabb"), read 'b' β all transitions from 7 on 'b' go to dead state y, so rejected.
Example: Language L = {w β {a,b}* : length(w) β₯ 2 and w neither ends in aa nor bb}
This language is expressed by the regular expression (a+b)*(ab+ba). The FA is built using a technique from J.C. Martin's book, where states are labeled according to the last one or two letters read: Ξ (start), aa, ab, ba, bb. The accepting states are those whose labels end in "ab" or "ba".
π Definition β State Labeling: States are labeled by the last one or two characters of the string read so far, allowing the automaton to "remember" the necessary suffix to decide acceptance.
π Example: For the string "bab":
- Start at Ξ, read 'b' β go to state labeled "b" (not explicitly shown but transitions go to appropriate two-letter states)
- Read 'a' β go to state "ba"
- Read 'b' β go to state "ab" (final state, since it ends in "ab") The FA ensures that only strings of length β₯ 2 ending in "ab" or "ba" are accepted.
Example: Language L = {w β {a,b}* : w does not end in aa}
This language is expressed by the regular expression Ξ + a + b + (a+b)*(ab+ba+bb). The FA uses the same state labeling technique (Ξ, aa, ab, ba, bb), with final states being all except "aa" (and the empty string is accepted via Ξ as a final state).
π Example: String "aba": start at Ξ, read 'a' β go to some state, read 'b' β go to "ab", read 'a' β go to "ba" (final, since it ends in "ba"). String "baa": start Ξ, read 'b' β go to "b" state, read 'a' β go to "ba", read 'a' β go to "aa" (non-final, rejected because it ends in "aa").
Method 5: Transition Graph (TG)
Transition Graphs (TGs) are introduced as a generalization of FA. A TG consists of:
- Finite number of states, at least one start state and some (maybe none) final states
- Finite set of input letters (Ξ£)
- Finite set of transitions that allow moving from one state to another based on reading specified substrings of input letters, possibly including the null string (Ξ)
π Definition β Transition Graph (TG): A collection of states with transitions labeled by substrings (not just single letters) of the input alphabet, including the possibility of Ξ-transitions.
π Example: In a TG, a transition from state A to state B could be labeled "ab" meaning the entire substring "ab" is consumed in one step. An edge labeled Ξ means the machine can move without consuming any input.
β Key Takeaways
The most critical concepts to remember from this lecture are: Dead states are essential for making FA complete and deterministic, trapping invalid inputs permanently. The tree structure method provides a systematic way to build FA for finite languages by constructing paths for each string and adding dead states for all other transitions. The state labeling technique (labeling states by the last characters read) is powerful for constructing FA that recognize languages based on string endings, such as "strings not ending in aa". Transition Graphs (TGs) generalize FA by allowing transitions on arbitrary substrings (including Ξ), making them more flexible but still equivalent in power to FA. Finally, a language's regular expression directly guides the construction of its corresponding FA or TG.
π§ Quick Revision Questions
- What is a dead state and why is it necessary in constructing FA for finite languages?
- For the language L = {aa, bab, aabb, bbba}, using the tree method, what path does the string "bab" follow from the start state?
- How does the state labeling technique help construct an FA for the language of strings that do NOT end in "aa"?
- What is the key difference between a Transition Graph (TG) and a standard Finite Automaton (FA) regarding transition labels?
- If a language is expressed by the regular expression (a+b)*(ab+ba), what are the final state labels in the corresponding FA built using the Martin technique?